√using successfully airport express for internet/ when hooking up new airport extreme light glows green, but does NOT appear in devices seen????airport wifi devices
using sucessfully airport express for internet
when hooking up new airport extreme light glows green, but does NOT appear in devices sesn in 5.6 airport wifi devices
wanting to use extreme at base and express in another part of the house
How is the express getting internet? What modem is it plugged into?
How is the extreme setup? New extreme cannot be setup with 5.6 utility.. you must use latest 6.3. Which also means you cannot setup from computer using less than Lion .. or you must use iOS with latest utility but it has limited configuration cf the computer version.
IPv6 is also needed.. turn on local link.
Similar Messages
-
Hi,
I have two SCCM environments under same active directory domain and one service account have been used for SCCM configurations on both the environments (QA and PRODUCTION). I am facing similar error as mentioned above while trying to fetch reports on
PRODUCTION site, but the QA site is working fine, though same service account have been used for configuring both. While looking at the reportserverservice_<date> log on my Production DB server i see the following error
"processing!ReportServer_0-3!2124!01/02/2015-09:09:30:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: , Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: An error has occurred during
report processing. ---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot read the next data row for the dataset DataSet1. ---> System.Data.SqlClient.SqlException: Conversion failed when converting the nvarchar value 'Override
Default' to data type int."
My DB and SCCM primary site are different and the reorting services point is installed on remote DB server. Please help me resolving the issue.
Troubleshooting performed:
1.Disabled the registry key 'EnableRbacReporting' from HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\SRSRP to 0 and then restarted SSRS service and the reporting worked for some minutes after that the registry key reverted back to 1 automatically and
reporting started throwing errors again.
2. Checked with the permissions on DB whether or not 'sysadmin' role is assigned to the SCCM service account.
3. re-registered the SQL management Provider WMI class.
mofcomp.exe “C:\Program Files (x86)\Microsoft SQL Server\110\Shared\sqlmgmproviderxpsp2up.mof”Hi All,
Finally found exact solution to the reporting error.
Error: while launching SCCM reports (both from Console and web based) an unexpected error occured with error message as "The DefaultValue expression for the report parameter ‘UserTokenSIDs’ contains an error: A specified logon session does not exist.
It may already have been terminated. (rsRuntimeErrorInExpression)"
Solution: This is password replication issue for the domain account used to configure reporting services point in SCCM. If your SQL SSRS reporting services instance and databse runs with local default account whereas the reporting services point on SCCM
primary site is configured with domain account, (As in My case) you need to perform the following in order to get rid of the error.
Launch 'Reporting Services Configuration Manager' from the SQL SSRS box(either Local or Remote), Connect to Report Server Instance->Go to 'Execution Account' tab->Specify the 'Execution Account' as domain account and password which is used to configure
Reporting Services Point in SCCM Primary Site, and then click apply.
Now Lauch the report either way (Web based or from Console), the error will disappear and all your default reports will execute perfectly as before. -
I replaced the original hdd in my early 2008 iMac. I can't move my files that were backed up with Time Machine to my new hdd using Migration Assistant. When prompted to select the "from drive", the ext. hhd does not appears as a selection. Please help!!
I'd recommend staring over, Pondini has created an excellent guide on how to use Setup Assistant. I'd recommend begin reading Pondini Setup Assistant tips where he talks about "Second Chance." Assuming your Time Machine backup is sound the restore should be very smooth.
Roger -
Epson r800 prints, but does not appear in Printer List: can't use Utilities
My Epson r800 prints, but does not appear in Printer List. It is connected via USB to the iMac. A Brother LH-2070N is connected via AirPort Extreme. I need to use Utilities to clean the head of cartridge, check levels, etc.. Is there a way to fix this problem?
iMac Mac OS X (10.4.9)For your Epson try this:
Hard Drive, Library, Printers (folder), Epson folder,
Inkjetprinter folder, Utilities folder and here you
will find Epson Printer Utility2. Click on it and it
should work.
Note. Epson utilities will not work unless the
Printer is directly connected to the computer.
Had the same issue with my 2200 photo and the above
worked.
Tried again after reinstalling the drivers. There is no separate Inkjet Folder, but the Printer Utility is within the Epson folder. Unfortunately, the r800 still does not appear in the Printer List, hence no utility. -
Field on manual tabular appears using Firefox but does not appear using IE
Hello,
A field in a manual tabular form appears correctly using Firefox but does not appear or appears in another field when IE is used. Javascript is used to hide certain columns on the tabular form. Does anyone know how to solve this problem?
Thanks panyPrabodh,
The select for the report and the javascript that is used to hide the columns are displayed below. The data for Apex_item.select_list_from_lov(12,null,'LOV_METHOD_OF_ACQ') is shown in the previous column, Date Acquired, and the column for Method Acquired is blank. It appears correctly in Firefox. Please let me know if this is sufficient.
Thanks,
pany
SELECT
apex_item.hidden(1, c011) status
,apex_item.checkbox(2,seq_id) checkbox
,apex_item.hidden(3, seq_id) seq_id
,apex_item.hidden(4,c001) Owner_Firm_Id
,apex_item.hidden(5,c002) Owner_Id
,apex_item.hidden(6,c003,10) First_Name
,apex_item.hidden(7,c004,10) Last_Name
,apex_item.text(8,c005,10) Number_Shares
,apex_item.text(9,c006,10) Percentage
,apex_item.text(10,c007,10) Class
,apex_item.date_popup(11,rownum, c008, 'MM/DD/YYYY',15) Date_Acquired
,apex_item.select_list_from_lov(12,c009,'LOV_METHOD_OF_ACQ') Method_Acquired
,apex_item.hidden(13,c010,10) Primary_Key
FROM apex_collections
WHERE collection_name= 'INTEREST_STOCK_COLL'
AND c011 IN ('O','N','U')
union all
select
apex_item.hidden (1,null) status
,apex_item.checkbox(2, null) checkbox
,apex_item.hidden(3, null) seqid
,apex_item.hidden(4,null,10) Owner_Firm_Id
,apex_item.hidden(5,null,10) Owner_Id
,apex_item.hidden(6,null,10) First_Name
,apex_item.hidden(7,null,10) Last_Name
,apex_item.text(8,null,10) Number_Shares
,apex_item.text(9,null,10) Percentage
,apex_item.text(10,null,10) Class
,apex_item.date_popup(11,1, null,'MM/DD/YYYY',15) Date_Acquired
,apex_item.select_list_from_lov(12,null,'LOV_METHOD_OF_ACQ') Method_Acquired
,apex_item.hidden(13,null,10) Primary_Key
FROM dual
Javascript
function hideCols(p_startOfTable, p_pageList, p_debug)
alert("in function");
var outStr = "Blanking Script:\n";
var debug = p_debug;
var offCols = p_pageList.split(":"); //string comes in colon delimited, split it
into array
var tbl = document.getElementById(p_startOfTable); //get the table from the page
html source
var rows = tbl.getElementsByTagName('tr'); //get the first row
var tds = tbl.getElementsByTagName('td');
var testStr;
outStr = outStr + "START tds length is " + tds.length + "\n";
if (debug)
alert(outStr);
//START Clear Headers
var i, j, cells;
cells = rows[0].getElementsByTagName('th'); //get the headers
for (j = 0; j < offCols.length; j++)
cells[j].className = "hidden";
outStr = outStr + "i is " + i + " HEADER rows.length is " + rows.length +
"\n";
if (debug)
alert(outStr);
//END Clear Headers
//START Clear TDs
for (i = 0; i < tds.length; i++)
var attrib = tds.innerHTML;
var gNum = attrib.indexOf(" name=") + 7;
var colNum = attrib.substr(gNum, 2);
colNum = parseFloat(colNum);
for (j = 0; j < offCols.length; j++)
if (debug)
testStr = testStr + "\n" + "colNum is: " + colNum + " className is: " +
tds[i].className + " i is: " + i + " j is: " + j + "\n";
if (colNum == offCols[j])
if (debug)
alert("colNum is " + colNum);
if (tds[i].className == "datepicker")
if (debug)
alert("caught condition with i= " + i);
tds[i - 1].className = "hidden";
tds[i].className = "hidden";
tds[i + 1].className = "hidden";
//add popupLOV functionality here
//add radio button functionality here
// add other items that may have multiple <td>
else
//regular hideCol
tds[i].className = "hidden";
//END Clear TDs
if (debug)
alert(testStr);
//document.write(testStr);
Edited by: PANY on Aug 12, 2010 8:25 AM -
My iPad 2 Location Service works fine but does not work on my home Airport router. How can I fix the problem?
lbryan1987 wrote:
I dont want the button problem solved i need to know how to restore the phone without using that button or going into settings
You don't in the condition it's in. You will either have to get the phone replaced by Apple or pay a 3rd party to repair it.
there seriously should be more than two ways to solve this other wise apple is useless and we will never buy another apple product.
Seriously? It's physically broken! -
I bough a 4g Ipod nano 2nd gen for my cousins birthday. When i plug it into my computer it charges but does not show up in windows or itunes. I tried reseting it, reinstalling itunes, everything the site said but it didn't help. I am trying to sync songs to it for my cousin, but it won't work with it not connecting. Could the wire have something to do with it or is there a bigger problem here?
See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem -
I am using windows 7 and my 3rd gen nano is not recognized in itunes. I have followed all online troubleshooting to no avail. My ipod is recognized by windows but does not appear in itunes.
not recognized by anything: http://support.apple.com/kb/TS1369
recognized by windows, but not itunes: http://support.apple.com/kb/TS1363
solving the problem if the above does not work:http://www.instructables.com/id/What-to-do-when-iTunes-does-not-recognize-your-i Po/step1
(make sure you go to the next slides. -
Mac user, OSX 10.9.4. CS6, in the new Blur gallery the pin with adjusters does not appear for any of the three blur filters. This may have occurred since taking adobe watermark add-on and updating Bridge. any ideas?
I am using Mac OSX 10.10.1 (memory 8 GB 1600 MHz DDR3, graphics Nvidia GeForce GT 650M 1024 MB)
and my version of Photoshop is CC.
I ran into the same problem: I am able to place and view Blur Gallery pins but the adjustment wheel or outer control arounf the pin that allows you to tweak the blur value disappeared after being initially available. Additionally, the placed pin or pins appear to flicker on screen (while in blur gallery mode) until committing the change with the OK button. I have tried restarting both the computer and Photoshop, as well as what some other users have suggested such as View>Show>Edit pins turned on. Nothing has helped so far. I am still able to adjust the blur amount from the Blur Tools slider. thank you. -
IF YOU HELP MY NANO upgraded when you install PERFECT BUT DOES NOT APPEAR ON THE SCREEN NOTHING BUT as if you were OFF if turned PLEASE HELP OR MORE AND HAS THE NEW UPDATE
iPod not recognized in 'My Computer' and in iTunes for Windows
-
I have a MacBook Pro. When I go to system preferences, the external speakers option does not appear on the input tab and, of course, the external speakers do not work. Help?
When you plug headphones in, or external speakers, where it states "internal speakers", it will rename that "headphones", say. Unless you are running an external sound card.
-
Adding a second Airport Express for Internet Share?
I currently use an Airport Express for two reasons - either for Airtunes (which is wonderful) and also for Internet Sharing...
My ADSL modem is connected to my eMac via USB and if I turn on Internet Sharing to Airport (in the Sharing prefs pane) I can access the internet from my iBook or G5... but this way, I lose Airtunes... so it's Airtunes or Internet and not both at the same time.
I'm thinking of buying another Aiport Express so I can keep Internet Sharing turned on and use the other one for Airtunes. Is this possible?
Any ideas appreciated.
JonnyYou would be better off replacing your USB Modem with an ethernet modem wireless router and connecting your Macs to that network rather than use a Mac based software base station.
Having said that, your problem arises as you have two wireless networks, the eMac based network and one created by the Airport Express (AX).
You can re-configure your Airport Express to join (as a client) the eMac wireless network and then you can maintain internet sharing and use Airtunes.
Ensure that the eMac is working as the software base station.
Hard reset the AX.
Configure the AX (probably best to do this from the iBook or the G5) to join an existing wireless network and choose the eMac wireless network.
iFelix -
Airport express light is green but is not working
My airport express is on,light is green, all of my computers see it though Airport Utility however the computer that is 2 feet away has no internet abilities. It however see the house network,sign in but no not able to communicate with other house computers as well as the internet. 'The lights are on but no one is at home'
If all the other computers can connect to the Internet, try power cycling your entire network.
Power everyhing down on the network...all devices, order is not important
Wait a moment, then start the modem first and let it run a moment by itself
Then start your AirPort Express the same way
Continue starting the devices the same way until everything is back up
Check for Internet connections on all devices
Please post on your results -
Hi all - My mac pro 1,1 has an enigmatic problem. It's quad-core, 3Ghz, running OS X 10.7.5. The problem began some months back, when running HD video conferences, HD streaming videos and some other graphics-moderate (I won't say intense) uses, such as slide shows in Just Looking. My machine has an ATY, RadeonX1900 card and 2 monitors - both Apple displays, one being 30 inch 2560x1600, the other being 24 inch 1920x1200.
When I start those types of graphics-moderate apps, after about 5 minutes, something would crash (the monitors making a noise as it did) and the displays would both go black. The power did not appear to be fully cut off from the monitors. I think that the underlying applications, however, did not crash. So, I could still hear and speak to people during video conferences, and I could hear the sound tracks of videos.
Attempts to restart the computer and get the monitors back did not immediately work to undo the problem, if done straight away. The only way to correct the problem (so as to have the monitors work) was to wait for a few minutes and then restart.
After a lot of puzzled looking at console logs (and I confess that I am not an expert), I ran into a blank.
But, because of the timing of the crashes (after ~5minutes use) and restarts (after some minutes wait), I reasoned that the problem might be temperature related.
Once on that path of thought, I found this article:
http://worldtv.com/blog/guides_tutorials/fixing_an_overheating_mac_pro_no_expens e_required.php
I installed both Temperature Monitor and SMCFanControl. And I experimented, and got interesting results:
Now to the puzzling bit: SMCFanControl shows that the speed of the Power Supply Fan doesn't vary much, even if I use SMCFanControl to ramp fan speeds right up. All of the other fans react to SMCFanControl, going up to and above 2500rpm when commanded. But the Power Supply Fan does not. Having watched it for a few days now, the Power Supply Fan, according to AFCFanControl, never varies outside of a range from about 600-640 rpm, regardless of what I do with AFCFanControl.
Also (and not surprisingly), whenever the graphics-moderate apps run, when I ramp all the fan speeds up using SMCFanControl, Temperature Monitor shows that the all of the temperatures within the machine plummet, except in the power supply locations. Power Supply Location 2 is the worst affected. Because the Power Supply Fan does not react as the other fans do, the "crashes" still occur.
I could post some screen shots of the read outs of SMCFanControl and Temperature Monitor, although I think I have covered the key points in this post.
It seems that the Power Supply Fan is still working, but does not respond to increased loads.
Instinctively, I'm worried that if that's right, it might be a hard problem to fix. Any suggestions? Help! I would really appreciate them!
Cheers
PThanks for your response Grant. I had already read about, and I think excluded, dust in graphics card/fan/assembly as a cause. The entire inside of the computer, including the graphics card/fan/assembly, is as clean as a whistle. It looks clean. I've cleaned the dust out every now and then (including a few days ago). Also, my undersanding (derived from the article, linked in my first post) is that I might expect to see high temperatures in the Northbridge and memory module B if the graphics card was overheating. According to Temperature Monitor, however, locations do not increase in temperature when I run the relevant apps. Finally, the graphics card/assembly does not feel too hot to touch.
It is strange that SMCFanControl lists the Power Supply Fan as being software controllable, if that fan is not. Still, your comments are consistent with my observations, as the fan simply does not respond to software control.
There are two upsides: First, I've something of a work-around. I've worked out what temperature must be achieved in Power Supply Location 2 for a crash to occur, and I can watch that location in Temperature Monitor, terminating the process before that treshold is reached. Of course, that's not ideal. Second, ramping all the other fans up does significantly delay the onset of the problem, and makes recovery time much quicker.
Is there any donwside to peridically ramping up the other fans when running the relevant apps? Given that it causes all of the other locations to cool significantly, could this lessesn the life expecancy of the mahcine? (I don't want to run the fans up all the time - that's like sitting next to a jet ready for take off!)
Also, a correction to my first post: Yesterday, with all the other fans running on full and running an HD streaming video, the Power Supply Fan did, eventually, slowly, come up to ~740rpm, which is much higher than the ~640rpm maximum I had previously seen, and this may have aided delaying the onset of the problem.
I'm not sure where this leaves me? The problem might now be able managed. Well, sort-of. But it's not eliminated. -
When i scan and want to attach the item scanned does not appear.
i used to be able to scan and item and when i went to attach it would appear with the date scanned and i could then just click and it would attach. now after i scan and go to "attach" it does not appear.
== This happened ==
Every time Firefox openedHello Joe.
Although possibly not related to your problem, I will remind you that the version of Firefox you are using at the moment has been discontinued and is no longer supported. Furthermore, it has known bugs and security problems. I urge you to update to the latest version of Firefox, for maximum stability, performance, security and usability. You can get it for free, as always, at [http://www.getfirefox.com getfirefox.com].
As for your problem, can you be more specific about it? I'm not sure I understand what you need help with.
Maybe you are looking for
-
Bug in details view: index columns not shown correctly, stops at 4th column
I do have two indices on a table which are shown in the details view. In the column 'columns' only the first 4 columns are shown that belong to the index. If I choose an index in another detail view, all columns are shown correctly. Where to report t
-
Apple store update not working
Hi everyone, I have problem that my apple store update is not working or hanging despite shows 7 updates ?!! Any solution please ? Thanx
-
Problem starting BPEL Process Manager
When starting the BPEL Process Manager, the second window that is spawned to run the start_olite.bat throws a hotspot error as shown below. This happens each time and causes the PM not to start. Anyone had this problem ?. Thanks Andrew C:\OraBPELPM\b
-
I cannot open mail or quit mail
why can't i open or close mail.
-
TS3274 No movies or music will play on iPad
When I try to play a movie or listen to a song it won't play at all..