Attempting to Get Specific Items Selected from a JList

Hello all, back again...
I'm working on a simple interface that can run an SQL query with specific settings, and these settings can be altered by choosing one or multiple options from a JList to the side of the table that displays the results. My problem is, currently, not being able to figure out how to get the accursed thing to tell me what items in the JList are selected!
I've tried using:
int multiselect[] = cmbSystems.getSelectedIndices();...but it inevitably returns an array with a size of 1. Frustrating. I know I'm missing something, but I have no idea what. What am I doing wrong? Thanks!
~ Matt

Mystrunner wrote:
Hmm, okay... give me a bit to figure that out, and I will. :)Sure. Your SSCCE should probably only consist of a JList that prints out the selected items when the selection changes, or something like that. I would bet that you figure out what's going wrong in the process of boiling your code down to the SSCCE.

Similar Messages

  • How to get result of Select from stored function.

    I need to get result of select from a stored function.
    In the end of my stored function I makes final select (four columns).
    How it can be retrived from function?

    Hi,
    A function can only return one value, but it sounds like you want to return 4 values.
    The one value that you return can be a record, with many columns, such as a ROWTYPE, or a TYPE that you define.
    You can return an XMLTYPE that has whatever elements you want.
    You can write a procedure that has several OUT parameters. (You can have OUT parameters in a function, but a lot of people find that confusing.)
    In very special circumstance, you might consider returning a string that is a delimited list of values, such as '7639,SMITH,,17-DEC-1980'.
    Someoneelse has a good point.
    We could give a better answer if you ask a specific question, like:
    "I have this table ...
    I want a function such that, if I call it with these parameters ... I get ...
    but if I call it like this ... then I get ..."

  • Determining what metadata will get specific album art from iTunes Store

    How can I determine what metadata will get specific album art from the iTunes Store?
    e.g., I have some tracks with correct metadata for the album "International Herb" by the band "Culture".  This album is listed under the same artist & title in the iTunes Store, but getting the album art for these tracks results in an Artwork for "Culture - International Herb" could not be found warning message.
    Alternatively, is there some function where I can apply the album art for the album that I am currently viewing in the iTunes Store to tracks selected in iTunes?  (if this feature doesn't exist, it would be great if Apple added it)
    Thanks.

    I always thought it was just Artist + Album, but if the tracks are out of order or the durations are too different, it is possible that it is seeing it as a different version = no match.
    It will be faster to find the image from another source (thanks web search) and just drag or paste it into the Album Info panel.

  • How can I get specific files back from my Time Machine backup?

    I wanted to make a fresh install on my MacBook Pro, in order to only have Java 8 instead of any older Java versions. So far so good. But now I want to get specific files/libraries from my external backup (USB):
    One Parallels Virtual Machine
    My old mail
    My iPhoto Library
    I don't need any settings for these, since I can easily configure them again.
    I already used the Migration Assistent to restore all apps.
    How can I get specific data back from the backup without restoring all stuff that I don't want anymore?
    I'm now working on a new account on the fresh system, called 'Admin'. My old account was called 'Hans' (or 'hans') and I'd like to create such an account again for all my tasks.
    Hans

    How can I get specific data back from the backup without restoring all stuff that I don't want anymore?
    I'm now working on a new account on the fresh system, called 'Admin'. My old account was called 'Hans' (or 'hans') and I'd like to create such an account again for all my tasks.
    You will want to add the same User account(s) which hold the data you want to restore. So you will want to add a User account of 'Hans or hans'. Check your Time Machine back up drive to see how the User account is labeled (Hans or hans). Navigate to the Users folder and see how it's labeled.
    You can then use your Time Machine back up drive and navigate to the User Home folder to copy its data over (e.g. contents from Documents, Downloads, Music, Pictures, etc.). Repeat for other Users.

  • Is there any way to get specific app data from iCloud so that when you redoes load an app, you can restore its data?

    Is there any way to get specific app data from iCloud so that when you redoes load an app, you can restore its data?

    no.
    the backup is only for the purpose if you need to wipe the device.

  • The way to open 3D pdf with specific model selection from url link

    I guess this feature is not supported, but let me ask one thing.
    I am looking for the way to open 3D pdf with specific model selection from url link.
    For example, if the following link is opened, is it possoble to open 3d.pdf with automatic selection of "abc" model in the model tree? 
    http://example.org/3d.pdf#model=abc
    If it can be done by javascript, it's really helpful.

    Impossible. There are only very limited command-line options for the Acrobat Family and you cannot change them.

  • Getting all the values from a JList

    Hi,
    I want to get all the values from a JList and store it into an array. Any method is available to perform this task? Pls help me out with this task.

    Use getModel() on the list to get the ListModel and then call getSize() and getElementAt(int) to loop over the elements
    HTH
    Mike

  • Get Node Key Multiple Items Selected  from ALV tree

    Hello Experts,
    I'm having a problem in getting Node keys for the items displayed as ALV tree.
    I'm able to get Node key, when only ONE record (Item) is selected.
    But, when I select multiple items under a Single node am not able to read(get) the node keys for all the selected items.
    I'm using the classCL_GUI_ALV_TREE.
    I have tried using the method GET_CHECKED_ITEMS, but not getting the keys.
    method GET_SELECTED_ITEM is giving node for a single item. I need it for multiple items selected.
    Thank you for your time.
    -SANGAR

    Hi,
    You need to use checkbox concept. and use method GET_CHECKED_ITEMS get selected items
    please check this tread.
    CL_GUI_ALV_TREE and Checkboxes
    aRs

  • How to delete items selected in a JList?

    Ahoy,
    I hava made a Multiple selection list (two list: one for
    the items that might be selected and another one
    for the selected items). How can I delete the (faultly) selected items in the second list?
    Thanx,
    // create function button
    copy = new JButton( ">>" );
    delete = new JButton ( "<<");
    copy.addActionListener(
    new ActionListener() {
    public void actionPerformed( ActionEvent e )
    // place selected values in functionList
    copyList.setListData(
    functionList.getSelectedValues() );     
    delete.addActionListener(
    new ActionListener() {
    public void actionPerformed( ActionEvent e )
    // delete selected items from copyList
    );

    You must get the selected item and remove from the model...
    delete.addActionListener(new ActionListener() {
    public void actionPerformed(ActionEvent e) {
    int si = list.getSelectedIndex(); //get the index of the item selected
    if (si > -1) {   //to validate that be selected
    listModel.removeElementAt(si);  //remove from the listmodel
    modifyTextField.setText("");  
    });in this url you can see a complete sample..
    http://www.esus.com/javaindex/j2se/jdk1.2/javaxswing/atomiccontrols/jlist/addtojlist.html

  • Cannot get music library selections from my old computer to appear on new computer

    I tried without success to get my music library transferred, or exported to my new computer.  I turned on home sharing on my old computer by putting in my username, my email, and my password.  The screen said that this was done.  I then turned on home sharing on my new computer using the same username and password for my apple ID account.
    I could not get the 2798 songs on my old music library to transfer to my new computer so that I could put my library into my new computer.
    When I went to help and searched for "Using Homesharing to import items from another itunes library", even though I followed the directions, I could not execute item #4, "to import items from another computer, select the computer (below shared), and drag items from its library to yours."  I could not do this, is there anyone out there that can help me?? 

    Many ways.goggle it.  You can buy an external hard drive or a flash drive depending how large your music library is.

  • Oracle SQL query for getting specific special characters from a table

    Hi all,
    This is my table
    Table Name- Table1
    S.no    Name
    1          aaaaaaaa
    2          a1234sgjghb
    3          a@3$%jkhkjn
    4          abcd-dfghjik
    5          bbvxzckvbzxcv&^%#
    6          ashgweqfg/gfjwgefj////
    7          sdsaf$([]:'
    8          <-fdsjgbdfsg
    9           dfgfdgfd"uodf
    10         aaaa  bbbbz#$
    11         cccc dddd-/mnm
    The output has to be
    S.no    Name
    3          a@3$%jkhkjn
    5          bbvxzckvbzxcv&^%#
    7          sdsaf$([]:'
    8          <-fdsjgbdfsg
    10         aaaa  bbbbz#$
    It has to return "Name" column which is having special characters,whereas some special chars like -, / ," and space are acceptable.
    The Oracle query has to print columns having special characters excluding -,/," and space
    Can anyone help me to get a SQL query for the above.
    Thanks in advance.

    You can achieve it in multiple ways. Here are few.
    SQL> with t
      2  as
      3  (
      4  select 1 id, 'aaaaaaaa' name from dual union all
      5  select 2 id, 'a1234sgjghb' name from dual union all
      6  select 3 id, 'a@3$%jkhkjn' name from dual union all
      7  select 4 id, 'abcd-dfghjik' name from dual union all
      8  select 5 id, 'bbvxzckvbzxcv&^%#' name from dual union all
      9  select 6 id, 'ashgweqfg/gfjwgefj////' name from dual union all
    10  select 7 id, 'sdsaf$([]:''' name from dual union all
    11  select 8 id, '<-fdsjgbdfsg' name from dual union all
    12  select 9 id, 'dfgfdgfd"uodf' name from dual union all
    13  select 10 id, 'aaaa  bbbbz#$' name from dual union all
    14  select 11 id, 'cccc dddd-/mnm' name from dual
    15  )
    16  select *
    17    from t
    18   where regexp_like(translate(name,'a-/" ','a'), '[^[:alnum:]]');
            ID NAME
             3 a@3$%jkhkjn
             5 bbvxzckvbzxcv&^%#
             7 sdsaf$([]:'
             8 <-fdsjgbdfsg
            10 aaaa  bbbbz#$
    SQL> with t
      2  as
      3  (
      4  select 1 id, 'aaaaaaaa' name from dual union all
      5  select 2 id, 'a1234sgjghb' name from dual union all
      6  select 3 id, 'a@3$%jkhkjn' name from dual union all
      7  select 4 id, 'abcd-dfghjik' name from dual union all
      8  select 5 id, 'bbvxzckvbzxcv&^%#' name from dual union all
      9  select 6 id, 'ashgweqfg/gfjwgefj////' name from dual union all
    10  select 7 id, 'sdsaf$([]:''' name from dual union all
    11  select 8 id, '<-fdsjgbdfsg' name from dual union all
    12  select 9 id, 'dfgfdgfd"uodf' name from dual union all
    13  select 10 id, 'aaaa  bbbbz#$' name from dual union all
    14  select 11 id, 'cccc dddd-/mnm' name from dual
    15  )
    16  select *
    17    from t
    18   where translate
    19         (
    20            lower(translate(name,'a-/" ','a'))
    21          , '.0123456789abcdefghijklmnopqrstuvwxyz'
    22          , '.'
    23         ) is not null;
            ID NAME
             3 a@3$%jkhkjn
             5 bbvxzckvbzxcv&^%#
             7 sdsaf$([]:'
             8 <-fdsjgbdfsg
            10 aaaa  bbbbz#$
    SQL>

  • CAML Query to get specific item in folder based on dropdown value using Javascript client object model

    Hi,
    I am using the Javascript Client object model.
    I have a custom list and a custom document library.
    Custom list contains 2 columns - dlName , dlValue
    The document library contains 2 folders - "folder1" ,  "folder2" and contains some images.
    The image name starts with the "dlValue" available in the custom list
    I am using a visual webpart and using javascript client object model.
    I am trying to achieve the below functionality:
    1) Load a dropdown with the custom list.
    2) set the image based on the value in dropdown.
    I have achieved the first option, I have set the dropdown, but not sure how to query the folder and set the image.
    Below is the code i have used so far:
    //In Visual webpart
    <select id="ddlTest" >
    </select>
    <br/>
    <div id="PreviewLayer">
    <img id="imgPlaceHolder" runat="server" alt="Image" title="imgPlaceHolder" src=" " />
    </div>
    // In Javascript file
    function RenderHtmlOnSuccess() {
    var ddlTest = this.document.getElementById("ddlTest");
    ddlTest.options.length = 0;
    var enumerator = this.customListItems.getEnumerator();
    while (enumerator.moveNext()) {
    var currentItem = enumerator.get_current();
    var dropdownValue = currentItem.get_item("dlValue");
    ddlTest.options[ddlTest.options.length] = new Option(currentItem.get_item("dlName"), dropdownValue);
    setImage(dropdownValue); // Not sure how to query the folder and set the image based on value.
    // Also if dropdown value is changed, corresponding image should be shown
    How to query the folder and based on dropdown value, show the image? Also, how to handle the dropdown value change?
    Thanks

    Hi,
    Here are two links for your reference:
    Example of how to Get Files from a Folder using Ecmascript \ Javascript client object model in SharePoint 2010
    http://sharepointmantra.wordpress.com/2013/10/19/example-of-how-to-get-files-from-a-folder-using-ecmascript-javascript-client-object-model-in-sharepoint-2010/
    SP2010 JSOM Client Object Model: How to get all documents in libraries including all folders recursively
    http://sharepoint.stackexchange.com/questions/70185/sp2010-jsom-client-object-model-how-to-get-all-documents-in-libraries-including
    In SharePoint 2013, we can also use REST API to achieve it.
    http://msdn.microsoft.com/en-us/magazine/dn198245.aspx
    Thanks,
    Dennis Guo
    TechNet Community Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Dennis Guo
    TechNet Community Support

  • How to get the item name from a column in an interactive report?

    I created an interactive report. Then on the same page I added a tabular form region. What I want to implement is that, when I click a column link button on a specific row, the name of the row will be passed to the tabular region, so that the tabular region can list the corresponding items that belong to that specific row. But I have no idea what the name it is. Any idea? Thanks!

    Thanks! I've got it work! Now I can associate many product to a specific ProductNumber.
    Another issue comes up: I want to be able to add more products in this category. But when I press the "Add Row" button, it generates a new line but with ProductNumber null. This results me in failing to insert the new record, because the rule is that ProductNumber can't be null, and also it can't be assured that the new record is associated with this category (ProductNumber). What can I do to make it automatically come up with the same ProductNumber for new records? I guess some kind of a trigger may be needed, but I don't know how to do it.
    I made a screenshot here: http://img25.imageshack.us/img25/3051/98605982.png
    Thanks!

  • Specific Vendor selection from a Customer for component in a Bulk Order

    We have a situation that for a Particular customer ordering Bulk they can only select an API based on Vendors
    Customer one orders Bulk A and API X but API X can only come from Vendor 1
    Customer two orders Bulk A and API X but API X can only come from Vendor 2
    How can you manage this best in SAP PP ECC ?

    Hi Milton007,
    Well as per your thread i would like to suggest you there is a cycle in MM module perspective Which is also called as P2P cycle
    and here you have an option to select the best vendor.
    So, i hope go for this scenario.
    Regards,
    Madhu.G

  • Regarding getting specific font data from file

    I am developing one application in java(swing) font converter. In which I have to upload .doc file .Then if that file contains marathi,english text then I want to change marathi font to unicode.My converter program is completed.Now problem is that how I get marathi font or any other non unicode font from file whcih I want to unicode?
    Thanks in advance.

    font is to unicode like apples is to oranges
    Unicode assigns a number to a character.
    A charset or encoding is what is used to represent the character as bytes.
    A font is used to draw the character to the screen.
    You are reading in bytes, and you want to assign unicode values to those bytes. You keep using the word 'font' when font really isn't related to converting it to unicode. What encoding are these docs in? UTF8? UTF16? ISCII?
    If this were chinese, you might have a BIG5 charset, but you could have any number of fonts to draw those characters to the screen. You are missing an important step in this conversion.

Maybe you are looking for