Attempting to join datablocks

Quite new to forms development so forgive the mundane
questions. I am attempting to effectively join to tables into
something that acts like a single datablock.
Table A Table B
PK Fact1 FK Fact2
1 a 1 x
2 b 2 y
3 c 3 z
4 d 4 zz
I want to be able to display on a single form the result of a
select from Table A and Table B Where PK=FK. I would like it to
act as though selected from a single block EG When Scrolling
down one column, the other is synchronized to the equivalent
record (fact1=c when fact2=z)
I can do this by providing a view in the database, and building
the datablock on the view, but I haven't yet done it up in the
form level.
If someone could point me in the direction of some answers, or
better yet provide me with answers, I would be greatly
appreciative.
Thanks Andrew G
PS Please respond to my email address as well as the newsgroup.
Thanks Again.
null

Andrew Galbraith (guest) wrote:
: Quite new to forms development so forgive the mundane
: questions. I am attempting to effectively join to tables into
: something that acts like a single datablock.
: Table A Table B
: PK Fact1 FK Fact2
: 1 a 1 x
: 2 b 2 y
: 3 c 3 z
: 4 d 4 zz
: I want to be able to display on a single form the result of a
: select from Table A and Table B Where PK=FK. I would like it
to
: act as though selected from a single block EG When Scrolling
: down one column, the other is synchronized to the equivalent
: record (fact1=c when fact2=z)
: I can do this by providing a view in the database, and building
: the datablock on the view, but I haven't yet done it up in the
: form level.
: If someone could point me in the direction of some answers, or
: better yet provide me with answers, I would be greatly
: appreciative.
: Thanks Andrew G
: PS Please respond to my email address as well as the newsgroup.
: Thanks Again.
You are at the right way by defining a view in the database and
using the view as base table. The problem will be that this view
will not be updatable, or not all of the columns of the view. So,
if you try to update a record in your form you will get a error
message like 'Cannot insert or update data in a view'.
Workaround:
you need to overwrite the standard handling of forms by
implementing the following block triggers:
- on-lock
- on-insert
- on-delete
- on-update
I'll send a you a document wich describes the steps in detail. If
anyone else is interested in this, he or she can get this
document too, just email to me.
peter
null

Similar Messages

HT5437 When I try to connect to a WiFi network that I need a screen pops up and says "The network you're attempting to join requires you to install a profile on your Apple TV." What does this mean?

When I try to connect to a WiFi network that I need a screen pops up and says "The network you're attempting to join requires you to install a profile on your Apple TV." What does this mean?

Yes, home sharing requires both to be on the same wifi network. As it stands access to the network requires the login via webpage, which cannot be done on Apple TV. You will need to speak to IT in order to grant access for the device.

Why is there a limit on the number of times you can attempt to join Family Share?

I attempted to join Family Share yesterday but it did not seem to work on either my phone or iPad, which I updated to iOS8. I tried to do it twice, both times unsuccessfully, when I attempted to do it a third time I was locked out of joining Family Share using my Apple ID for a year! Why is there a restriction?

Region encoding is the mechanism that enables motion picture studios to control the worldwide release of their movies. It is required by the DVD Forum (http://www.dvdforum.org/forum.shtml) in all commercial hardware DVD players. Every DVD-Video disc contains one byte of data representing a region code, which limits where the disc can be played.
http://support.apple.com/kb/HT2397
Once you have set the region in DVD Player five times it cannot be changed.
Instead, use VLC to view videos from different regions:
http://www.videolan.org/vlc/download-macosx.html

ZTIDomainJoin has attempted to join to domain [Domain.LOCAL] too many times. Count = 4_ZTIDomainJoin_25-6-2013 13:06:20_0 (0x0000)

Hello,
in my invironment the domain-join isn`t working well.
In the log : ZTIDomainJoin has attempted to join to domain [Domain.LOCAL] too many times. Count = 4 ZTIDomainJoin 25-6-2013 13:06:20 0 (0x0000)
What can i do to fix this issue permanent?
Thx

The log you actually want to look at is %SystemRoot%\Debug\NetSetup.log. As Keith said, this file will tell you why a Domain Join is failing and should point you in the right direction to understand what's wrong. There's a
good (but old) primer on debugging the issues here: http://technet.microsoft.com/en-us/library/cc961817.aspx
David Coulter | http://DCtheGeek.blogspot.com |
@DCtheGeek

I am attempting to join a cellular data account. It requires cookies. How do I enable cookies.

I am attempting to join the at and t cellular data service. It states that Cookies are required, asks that I enable cookies. How do I do that?

You can enable cookies in Safari via Settings > Store > Acceot Cookies = 'From Visited'

Downloaded 8.0.2, able to continue to connect to internet via wifi for approx. 2 hours, then, wham, no wifi connection, and when I attempt to join my wifi network, and enter my code, i am told that the code is incorrect. I rebooted my IPad 3, nogo!

I uploaded 8.0.2, able to continue to use my IPad 3, use internet, WiFi connectivity OK. Then, about 1 1/2 hours later, I loose internet connection, and WiFi connectivity. I rebooted the IPad and attempted to rejoin my WiFi network...no go, message says my password is wrong!! I then, pursuant to a suggestion in the message boards, entered "Forget Network" and then attempted to again join my WiFi. Again, message says "password is wrong" Password is correct; I am on the internet on my desktop via my WiFi network!! Is the 8.0.2 "update" defective and/or compromised?? My partner, who has an IPad Air, also updated to 8.0.2 this afternoon and has had the same problem!!!

Actually, we up-loaded the new OS in the early evening! We now have WiFi connectivity, and this is how it was achieved: turned off the power to our WiFi modem, then turned it back on; wifi booted up; in IPad's Settings, WiFi: toggled the Wi-Fi button off, waited a short while and toggled it back on; choose our network and entered our passcode...IPad finally accepted the passcode. However, at the top left-hand portion of the screen, we now have a "No Service" statement, yet we are wifi connected and have internet service on our various apps!

Error when attempting to join Airport Network

My iMac G4 17" flat panel has been unable to connect to my wireless Linksys router.
I recently did a software update which I hadn't done in some time, plus we finally got around to adding a WEP password as Comcast was telling me that's why we kept getting booted off the internet. Anyway, my iBook and two other PC notebooks can connect without a problem, but I can't get the iMac to join.
Sometimes it won't even find the base station. I don't understand why I get four bars on my iBook sitting right next to the iMac which can't even find the Linksys or the Airport Express I have 30 feet away connected to my stereo and printer. Is the antenna in the iMac that much differen than my first generation dual USB ibook?

I actually have this same problem, but with a pre-iSight iMac G5 17" 1.8ghz. In OS 10.3.9, there were no problems. After updating to Tiger, airport connection has been sporadic at best. VERY rarely, I can get a connection, but it's always weak and usually doesn't work, even if it says it's connected.
Usually, I try to connect and I get 'There was an error joining the __________ network.' And it prompts me to press 'ok' or 'try again'. Trying again does nothing.
I've gone through a lot trying to get this to work - and I currently am on 10.4.3 with the latest security update. I have 4 other computers in the house (3 different macs and a PC laptop) all of which are connecting fine. Any ideas on this? Any other information I should tell you?
Thanks,
Gabe

"Please Enable Java" error when attempting to join GoToMeeting webinar in Firefox 4.

Since upgrading to Firefox 4 I'm unable to join GoToMeeting webinars, such as
https://www2.gotomeeting.com/join/298237491/106133365
I receive a "Please Enable Java" error, see this URL for an example: https://www2.gotomeeting.com/island/joinError?e=JavaDisabled
I double-checked and Java is enabled and updated to latest version. I also tested it on javatester.org with success.
These types of webinar still function appropriately in Firefox 3.6.

Thank you, nganju, for helping.
I did the Explorer search on *.jar files with this phrase in the file:
OracleConnectionPoolDataSource
There were no results to display. I searched both the computer which is working and one that doesn't.
I used printStackTrace() to get more error message. Is there a way to print the error msg to a file so I can paste it here? Among other things, it said the following:
com.sun.naming.internal.VersionHelper12.loadClass(VersionHelper12...
javax.naming.spi.NamingManager.getInitialContext(NamingManger...
Does any of this help you? I have no idea what to do next except call for help.
Help! : )

Ora-28509 and ora-28511 when attempting to join oracle with postgresql in query

I have attempted to run the following statement.
select a."uri", b.person_id from "sources"@postgresql a, ct_person_src_ref_store b where decoder(b.source_uri) = a."id";
This is the error I get.
ERROR at line 1:
ORA-28511: lost RPC connection to heterogeneous remote agent using
SID=ORA-28511: lost RPC connection to heterogeneous remote agent using
SID=(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521))(CONNECT_DAT
A=(SID=posgre133)))
ORA-28509: unable to establish a connection to non-Oracle system
ORA-02063: preceding line from POSTGRESQL
Process ID: 116908
Session ID: 5197 Serial number: 49491
I have a resulting trace file from having HS_FDS_TRACE_LEVEL = DEBUG. It's kind of long (490 lines). I'm hesitant to paste the whole log into this posting. Is there a certain part of the trace file that I can post that would assist in helping me determine the cause of the error?
Thanks

That works now ....
When we ask the Postgres driver which columns/data types are in that table it reports:
Entered hgopcda at 2014/04/16-20:59:52
Column:27(uri): dtype:-1 (LONGVARCHAR), prc/scl:8190/0, nullbl:1, octet:0, sign:1, radix:10
Exiting hgopcda, rc=0 at 2014/04/16-20:59:52
Which then leads to:
SQL text from hgopars, id=1, len=32 ...
     00: 53454C45 43542022 6964222C 22757269 [SELECT "id","uri]
     10: 22204652 4F4D2022 736F7572 63657322 [" FROM "sources"]
Column:1(id): dtype:-5 (BIGINT), prc/scl:19/0, nullbl:0, octet:0, sign:1, radix:0
Exiting hgopcda, rc=0 at 2014/04/16-21:05:15
Entered hgopcda at 2014/04/16-21:05:15
Column:2(uri): dtype:-1 (LONGVARCHAR), prc/scl:8190/0, nullbl:1, octet:8190, sign:1, radix:0
Exiting hgopcda, rc=0 at 2014/04/16-21:05:15
hgodscr, line 464: Printing hoada @ 0x1ab8820
MAX:2, ACTUAL:2, BRC:1, WHT=5 (SELECT_LIST)
hoadaMOD bit-values found (0x20:NEGATIVE_HOADADTY,0x200:TREAT_AS_CHAR)
DTY             NULL-OK LEN MAXBUFLEN   PR/SC CST IND MOD NAME
-5 BIGINT      N          8          8   0/ 0    0   0 20 id
-1 LONGVARCHAR Y          0          0   0/ 0    0   0 220 uri
Exiting hgodscr, rc=0 at 2014/04/16-21:05:15
=> so far so good. The gateway exists from that routine and here it can't locate the database process anymore:
Exiting hgodscr, rc=0 at 2014/04/16-21:05:15
HS Agent received unexpected RPC disconnect
   Network error 1004: NCR-01004: NCRS: Write error.
Could you please upload the alert.log details matching that timstamp?
- Klaus

Joining Windows 2012 Server to SBS 2011 Domain

Hi All,
I have been trying to get a new Windows 2012 Server to join a SBS 2011 domain. The error message I am getting is:
The following error occurred attempting to join the domain: xxxx. The specified domain does not exist or could not be contacted.
I have a bunch of other Windows 7/XP workstations that have joined successfully. I have also tried disabling TCP/IP v6 on the 2012 server and joining the domain with the netdom command. The SBS 2011 server is listed as the primary DNS server on the 2012
server.
What else can I try here?
Thanks,
DR.

I am having the same issue has the OP. I have my DNS settings pointing to the sbs server that hosts the domain and DNS. I am receiving the same error.
Server 2012 R2 Standard
SBS 2011 Essentials
Jerry T

Managed server not able to join the cluster

Hi
I have two storage node enabled coherence servers on two different machines.These two are able to form the cluster without any problem. I also have two Managed servers. When I start one, will join the cluster without any issue but when I start the fourth one which does not join the cluster. Only one Managed server joins the cluster. I am getting the following error.
2011-12-22 15:39:26.940/356.798 Oracle Coherence GE 3.6.0.4 <Info> (thread=[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)', member=n/a): Loaded cache configuration from "file:/u02/oracle/admin/atddomain/atdcluster/ATD/config/atd-client-cache-config.xml"
2011-12-22 15:39:26.943/356.801 Oracle Coherence GE 3.6.0.4 <D4> (thread=[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)', member=n/a): TCMP bound to /172.23.34.91:8190 using SystemSocketProvider
2011-12-22 15:39:57.909/387.767 Oracle Coherence GE 3.6.0.4 <Warning> (thread=Cluster, member=n/a): This Member(Id=0, Timestamp=2011-12-22 15:39:26.944, Address=172.23.34.91:8190, MachineId=39242, Location=site:dev.icd,machine:appsoad2-web2,process:24613, Role=WeblogicServer) has been attempting to join the cluster at address 231.1.1.50:7777 with TTL 4 for 30 seconds without success; this could indicate a mis-configured TTL value, or it may simply be the result of a busy cluster or active failover.
2011-12-22 15:39:57.909/387.767 Oracle Coherence GE 3.6.0.4 <Warning> (thread=Cluster, member=n/a): Received a discovery message that indicates the presence of an existing cluster:
Message "NewMemberAnnounceWait"
FromMember=Member(Id=2, Timestamp=2011-12-22 15:22:56.607, Address=172.23.34.74:8090, MachineId=39242, Location=site:dev.icd,machine:appsoad4,process:23937,member:CoherenceServer2, Role=WeblogicWeblogicCacheServer)
FromMessageId=0
Internal=false
MessagePartCount=1
PendingCount=0
MessageType=9
ToPollId=0
Poll=null
Packets
[000]=Broadcast{PacketType=0x0DDF00D2, ToId=0, FromId=2, Direction=Incoming, ReceivedMillis=15:39:57.909, MessageType=9, ServiceId=0, MessagePartCount=1, MessagePartIndex=0, Body=0}
Service=ClusterService{Name=Cluster, State=(SERVICE_STARTED, STATE_ANNOUNCE), Id=0, Version=3.6}
ToMemberSet=null
NotifySent=false
ToMember=Member(Id=0, Timestamp=2011-12-22 15:39:26.944, Address=172.23.34.91:8190, MachineId=39242, Location=site:dev.icd,machine:appsoad2-web2,process:24613, Role=WeblogicServer)
SeniorMember=Member(Id=1, Timestamp=2011-12-22 15:22:53.032, Address=172.23.34.73:8090, MachineId=39241, Location=site:dev.icd,machine:appsoad3,process:19339,member:CoherenceServer1, Role=WeblogicWeblogicCacheServer)
2011-12-22 15:40:02.915/392.773 Oracle Coherence GE 3.6.0.4 <Warning> (thread=Cluster, member=n/a): Received a discovery message that indicates the presence of an existing cluster:
Message "NewMemberAnnounceWait"
FromMember=Member(Id=2, Timestamp=2011-12-22 15:22:56.607, Address=172.23.34.74:8090, MachineId=39242, Location=site:dev.icd,machine:appsoad4,process:23937,member:CoherenceServer2, Role=WeblogicWeblogicCacheServer)
FromMessageId=0
Internal=false
MessagePartCount=1
PendingCount=0
MessageType=9
ToPollId=0
Poll=null
Packets
{

Hi,
By default Coherence uses a multicast protocol to discover other nodes when forming a cluster. Since you are having difficulties in establishing a cluster via multicast, Can you please perform a multicast test and see if multicast is configured properly.
http://wiki.tangosol.com/display/COH32UG/Multicast+Test
Hope you are using same configuration files across the cluster members and all members of the cluster must specify the same cluster name in order to be allowed to join the cluster.
<cluster-name system-property="tangosol.coherence.cluster";>xxx</cluster-name>
I would suggest, try using the unicast-listener with the well-known-addresses instead of muticast-listener.
http://wiki.tangosol.com/display/COH32UG/well-known-addresses
Add similar entries like below in your tangosol override xml..
<well-known-addresses>
<socket-address id="1">
<address> 172.23.34.91<;/address>
<port>8190</port>
</socket-address>
<socket-address id="2">
<address> 172.23.34.74<;/address>
<port> 8090</port>
</socket-address>
</well-known-addresses>
This list is used by all other nodes to find their way into the cluster without the use of multicast, thus at least one well known node must be running for other nodes to be able to join.
Hope this helps!!
Thanks,
Ashok.
<div id="isChromeWebToolbarDiv" style="display:none"></div>

Windows client error joining with Samba 4.2 Active Directory server

I have a basic samba 4.2 ADC setup on CentOS 7 and I get a RPC server not available whenever I attempt to join a windows client to the domain. The smb.conf is default on created during provisioning. All indicated pre-testing seems to work as expected. The windows client finds the domain and recognizes a valid user or not but the last step of joining the domain ends with the error "Unable to join the Domain RPC server not available. Does anyone have any ideas?
Thanks Paul
This topic first appeared in the Spiceworks Community

I have a scenario for you in active directory when two passwords may be valid:
Old passwords can also work on domain controllers that have not received replication yet from either the domain controller the password was changed on, or the PDC emulator in the domain.
Let's take a scenario where we have a 3 site, 3 domain controller (DC) active directory: Site1 with DC1, site2 with DC2 and site3 with DC3.
The ACS application resides in Site3 and is configured to use DC3 for authentication. We have a user "user1" with a password of "123".
User1 decides to call the helpdesk and changes his password to "456".
The helpdesk uses DC1 to make password changes because they are located in site1. For a period of time (based on replication, which defaults to 3 hours between sites) the 123 password and the 456 password will be
valid.
If the user1 user tries the "123" password it will work until DC3 receives the changed password from normal replication. If user1 tries to use 456, DC3 will flag this as a wrong password, and then check the PDC
emulator of the domain to see if it has received a newer password. The PDC emulator will validate the login, and then trigger an immediate replication with DC3.
Regards,
~JG
Do rate helpful posts

Windows 8.1 Pro Will Not Join Domain

Hello,
I know this a bit lengthy, but hopefully all the details will better help you guys understand my problem.
We just purchased an HP Pavilion Windows 8.1 laptop for our office along with the Windows 8.1 Pro Pack upgrade. When I went to install the pro upgrade, it accepted my key and started the upgrade process, but before the install completed, an error was generated
that stated "Something went wrong. " No error code was generated. I restarted the laptop, it did some updates, and when I logged back in, I checked under the computer properties and noticed that the OS version was changed to Windows 8.1 Pro with
Media Center, so I assumed that it installed. I checked for corrupted files in the command prompt and no corrupted files were found.
So, the next thing I tried to do was join the laptop to our domain. I have joined XPs, Vistas, and 7s with no problems, but for some reason, Windows 8.1 does not want to join the domain. Just to be clear, I have the laptop plugged in via ethernet and the
wifi off, I checked that the DNS of the laptop matched the DNS of the server, and all firewalls have been disabled. It seems to find the domain, but when it asks for the credentials to join the server, it returns an error stating that the domain could not
be contacted or information was entered incorrectly. I know I am entering the correct credentials because, just to test, I created a new user account on a different machine and used the credentials to join the server. I pinged the server from the laptop and
vice-versa, and all packets were received with no errors, so I know that they are "seeing" each other. Also, If I join the laptop to a Workgroup instead of the domain, I am able to access the server using the same credentials that it will not accept
when attempting to join the domain.
I am baffled. Any help or suggestions will be much appreciated. Thanks!

I had exactly the same issue as above. When I rebooted my machine, it now shows that the upgrade to Pro Pack with media center is installed.
Haven't tried adding to a domain yet... will post an update when/if it fails. No reply means it joined fine after rebooting it from a failed attempt as above. I suspect that this had something to do with the fact that I had just logged
on to the machine and ran setup for the first time.
Reboot after setting up the computer for the first time, then proceed with the upgrade to 8.1 Pro Pack and I suspect that this issue won't occur.

Windows 8.1 Pro join to domain issues....

We bought some Windows 8.1 laptops and purchased the upgrade to the Pro version. When I attempt to join the laptops to the domain, it prompts me for domain credentials, I enter them, and I get an error....
Changing the Primary Domain DNS name of this computer to "mydomain.com" failed.
The name will remain "mydomain.com". The error was:
The specified domain either does not exist or could not be contacted.
Of course, the domain DOES exist and we have plenty of Windows 7 workstations signed into it just fine. I hit OK then login to the laptop using a domain account. At this point, I get an error telling me that no logon servers are available to authenticate.
This is a Windows 2008 domain controlled environment. Everything works fine otherwise for the Windows 7 systems, only these Windows 8.1 systems are having any issues. The new laptops are even showing up in DNS on the domain controller.
Any ideas what I might be missing? Is there something special about joining Windows 8.1 Pro systems to a domain?

OK; took a couple of more days than planned to get back on site. We're continuing to do testing, but here's the IPConfig /ALL that was requested. 10.0.0.1 is the gateway, 10.0.0.10 is the DC. The laptop is "Me-L" and the domain is "mydomain.com".
The below was pulled after getting IP information assigned via DHCP. The laptop is not joined to the domain at the moment and login is a local account.
Windows IP Configuration
Host Name . . . . . . . . . . . . : Me-L
Primary Dns Suffix . . . . . . . : mydomain.com
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : mydomain.com
Wireless LAN adapter Local Area Connection* 3:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Wi-Fi Direct Virtual Adapter
Physical Address. . . . . . . . . : A0-88-69-46-A4-CF
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Ethernet adapter Bluetooth Network Connection:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Bluetooth Device (Personal Area Network)
Physical Address. . . . . . . . . : A0-88-69-46-A4-D2
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Ethernet adapter Ethernet:
Connection-specific DNS Suffix . : mydomain.com
Description . . . . . . . . . . . : Realtek PCIe FE Family Controller
Physical Address. . . . . . . . . : EC-F4-BB-9C-36-56
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IPv4 Address. . . . . . . . . . . : 10.0.0.108(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Thursday, August 21, 2014 11:29:52 AM
Lease Expires . . . . . . . . . . : Wednesday, August 27, 2014 11:29:50 AM
Default Gateway . . . . . . . . . : 10.0.0.1
DHCP Server . . . . . . . . . . . : 10.0.0.10
DNS Servers . . . . . . . . . . . : 10.0.0.10
10.0.0.10
NetBIOS over Tcpip. . . . . . . . : Enabled
Wireless LAN adapter Wi-Fi:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) Dual Band Wireless-AC 3160
Physical Address. . . . . . . . . : A0-88-69-46-A4-CE
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

I am unable to connect my ipad to the internet via wifi, when asked for my password I get message "unable toI ge join network" however my laptop is able to access the internet using similar procedures and in the same physical location.?

I am unable to connect my IPad to the internet via WiFi, when asked for a password then attempt to join I get the messag "unable to join the network" however if I use my laptop in the same physical locationand using similar procedures I am able to conect.?

What router are you using? make/model/version
What security type are you using? If it is WEP then symbolic (non hex) keys may be converted to hex in different ways by different operating systems. Is your laptop a Windows PC?
If you are using WEP then drop it and move to WPA2. WEP has been deprecated by the WiFi alliance since 2004 as insecure (it can be hacked in seconds).

Attempting to join datablocks

Similar Messages

Maybe you are looking for