Attn moderators

my malwarebytes ( anti malware program) is kicking up a fuss over the thread " issue in cs3 for mac "...due to the link to postimage.org ....  cant reply to the message after I stop the attempted DL from postimage.org... to let the poster know theres a problem with his thread for me at least...

thanks Jerry,
I use malwarebytes ( security ) and it was blocking access to the ip for that link...so for me it was problematic...glad you checked it out and its OK..thanks a lot !
Rod
ps....often, with a "redirection" to another site my security will do that ...it doesnt mean that particular ip has been targeted necessarily as a " threat"...know what I mean ?

Similar Messages

  • System status or user status for IDOC creation and processing for prod ord

    All
    I am creating IDOCs for production orders to send requirements to an external WM system for kitting execution.
    I need to know whether there are any system statuses to notify me when an IDOC has been created,failed and processed. If not, how do I go about creating user defined statuses for these statuses.
    Second question, which idocs should I use  to confirm, teco and cancel the production orders from an external system?
    Thanks
    Evan

    For the first part of your query refer to the technical forums.
    For the second part - refer to Idoc - LOIPRO01, it has a segment for Order status, that should be of interest.
    Attn Moderators
    I think it would be better to move this thread to a technical forum, so the requester can get the most relevant information.

  • Chek System and User status during Equipment creation (IE01)

    Hi gurus
    I need to check if the system state I0180-NPRT is set by teh use during the creation of an equipment.
    I tried to use the FM BAPI_EQUI_GETSTATUS and ITO3_EQUIPMENT_READ_STATUS with the exit IEQM0003, but both FM doesn't retrieve any status during the creation of the equipment (IE01), while both work fine during change operation (IE02).
    Someboday has an idea, regarding the right FM to use for solve my issue ???
    Thanks in advance for your help.
    Claudio

    For the first part of your query refer to the technical forums.
    For the second part - refer to Idoc - LOIPRO01, it has a segment for Order status, that should be of interest.
    Attn Moderators
    I think it would be better to move this thread to a technical forum, so the requester can get the most relevant information.

  • Attn: ALL APPLE PORTABLE OWNERS -Macbook Pro, MacBook Air Apple portable slowdown / kernel high CPU solution

    Attn: ALL APPLE PORTABLE OWNERS -MacBook Pro, MacBook Air, Mac mini slowdown kernel / high CPU use problem and solution.
    YOU COULD FRY YOUR COMPUTER IF YOU DO NOT FIX THIS PROBLEM SO PLEASE READ THIS ENTIRE MESSAGE!
    YOUR MAC WILL THANK YOU  
    Hey all.
    Like many of you I've got a newer Apple portable which slows down to an unusable level for an unknown reason. In my case a 13" mid 2009 Intel MacBook Pro Core 2 duo laptop. After many failed attempts to figure out what this nutty problem is I have discovered the problem, the solution and I have solved this for my own MacBook Pro. Since this fix it has been working immediately and consistently -without issue 
    I am sharing this with you in hopes that you to can fix your Apple portable yourself or so you know what to tell the Apple techs so they can quickly fix your Mac from this wacky and unfortunate kernel CPU hogging problem.
    User Software Symptoms :
    Your Apple portable computer periodically for an unknown reason slows down making everything frustratingly slow. This happens even when running previous apps that were never a problem; things that your Mac should be able to handle easily but for some reason now it can't.
    Slowdown most often happens during high CPU use such as gaming, video playback/editing, etc. or when running multiple apps (even non CPU intensive apps) at the same time.
    Possible Hardware Symptoms:
    Your computer is making more noise than it did previously.
    Your computer occasionally makes more noise but then gets quieter.
    Your computer is always extremely quiet (too quiet) even during high CPU apps -worst case scenario.
    It feels hotter than it normally does. Test: After several minutes of the slowness/high kernel CPU touch the computer to feel if it's hotter than normal.
    Looking at Activity Monitor (in the Utilities folder) shows the kernel_task is going bonkers eating up CPU but you have no idea why.
    After trying many different things to solve this problem such as :
    PR ram reset, SMC reset, fresh OS install of 10.5 and 10.6 on external hard-drives, calling and speaking to various Apple tech people who had no ideas/solutions, etc. I had no luck.
    Btw, if you're having the symptoms I've decscribed above I would not run the Apple Hardware check (read below as to why). You could fry your Mac!
    After much testing I found the problem :
    It is my belief that "recent" Apple portable computers are using low quality internal fans which soon stop working!
    Fail time period seems to be about 1.0 years to 2.5 years of use but this fail rate could vary depending on use.
    First noticeable symptoms (depending on what you notice) could be computer slowdown or your fan is making more noise than it normally does. This is your fan's lubrication slowly eroding making your fan spin slower and less smooth resulting in the louder noise and slower rpm spin speed. The slower fan spin speed means less cooling is happening for your computer. The effect on your computer is that the CPU and other chips are heating up! Overheating to be more specific. When your computer's chips overheat they get wonky and screw things up. Most often this seems to have the effect of making the kernel hog CPU resulting in a frustratingly slow user experience! Heat kills computer chips and it is extremely bad for them. Extreme overheat or repeated overheating has been said to shorten the life of computer chips or in extreme cases even fry them completely!
    The longer this goes on without being fixed your fan loses more lubrication and spins slower and slower cooling lesser and lesser resulting in your CPU heating up more and more possibly shortening the life of your Mac! Eventually your fan will stop completely and you could fry your chips! My fan stopped completely and my MBP was running very quietly, too quietly. Luckily I did not fry my chips because I was avoiding using high CPU apps because I knew something was wrong due to the massive slow down and wonkiness when I'd run them.
    Side Note:I'm a bit concerned about all those Mac mini servers which may be using the same defective low quality fans which cannot be easily serviced by their owners as they are co-located in some server facility. One positive thing is those facilities are usually well airconditioned keeping temps low.
    I suggest you do not run the Apple hardware test if you suspect your computer is overheating because the hardware test can seriously heat up your Mac! I tried running this test and my Mac got so hot I had to shut it down forcefully and I was concerned I damaged the chips. If you want to run the Apple hardware check make sure your CPU temperature is ok and that your fan works well before you run the test.
    IF YOU DON'T FIX THIS PROBLEM YOU COULD FRY YOUR COMPUTER DUE TO HEAT DAMAGE!
    DO NOT IGNORE THIS PROBLEM YOUR MACS LIFE MAY DEPEND ON IT!
    First you need to properly diagnose this problem and see if your CPU is getting to hot and you need to see if your fans are spinning at high rpms giving proper cooling, or if they are spinning at low rpms when running high intensive apps as your CPU temp increases.
    TEST IF YOUR FAN(s) IS WORKING CORRECTLY :
    Unfortunately Apple does not include CPU temperature reading software nor fan rpm speed software that I am aware of.
    However, There are two free ways that I know of to check your CPU tempurature and your fan speed :
    One app shows fan speed, and CPU heat, etc.
    One app shows fan speed, CPU heat and allows you to adjust your fan speed settings.
    One app is a dashboard widget, the other is a system preference.
    I suggest you download both of these to check your computer statistics.
    http://www.eidac.de/?p=134
    http://www.islayer.com/apps/istatpro/
    http://fan-control.en.softonic.com/mac
    I am not exactly sure what proper CPU temperatures are for the different Apple computers and this will change given different CPU loads.
    My MBP doesn't seem to function properly with anything around 90 degrees or higher (celcius).
    It seems when the fan is operating normally the CPU temp should not stay above 78 degrees even under heavy load, at least with the apps I'm running in the room temperature I'm in.
    I can post back later with more specific temps under longer load, etc. but I wanted to get this post up for people to read as soon as possible so they don't fry their Macs.
    If a bad fan is your problem :
    THERE ARE ONLY TWO SOLUTIONS FOR THIS PROBLEM :
    Fix or replace your fan so it cools the CPU and other chips properly.
    I fixed my fan myself and I didn't need to buy a new one. Total cost was about $8.00 because I had to buy a #00 sized screwdriver and had it shipped to me. Price includes shipping.
    On my mid 2009 model MacBook Pro fixing the fan was incredibly easy :
    Before I started doing this I wasn't 100% this was the problem so I decided to try to fix my fan instead of ordering a new one and replacing it. As it turns out I didn't need a new fan, I only needed to clean the existing fan and relube it's axl so it could spin easier like when it was new.  It also didn't make sense to buy a brand new fan from an Apple authorized parts reseller selling me the same low quality fan for $49.00 which would probably fail in 2 years again. Prices for new comparable fans from different manufactures range from about $15.00 USD + shipping to around $49.00 USD + shipping depending on where you order them from and what brand you get.
    How to fix / replace your internal fan on a mid 2009 MacBook Pro :
    Please note : I am not a hardware technician, nor expert. If you decide to fix your Mac yourself you do so at your own risk through no fault of my own. Prior to opening up your Mac you should google around and learn how to do it correctly and safely so you won't damage your Mac. For example, it is possible for you to damage your Mac by static electricity from your body. To avoid this I believe proper procedure is that you wear a 'ground strap' (around your wrist) which  you clip to your Mac's metal body so your body will not excude a charge into your Mac. I believe the idea here is to keep your body's charge level and your Mac's similar. Since I do not have a ground strap and fixing/replacing the fan doesn't require touching any chips I did not wear a ground strap during my fan fix. What I did was periodically repeatedly touch the metal case of my MBP hoping that would be enough and it was. Avoid unecessary actions that can build up a static charge in you. Once I started the repair I did not walk around the room building up an electrical charge in my body. Walking on carpet can often build up a large charge in us so it is better to be avoided while working on your Mac. Certain clothing can build up static charges. Combing hair, etc. If you need to get up from your repair when you come back make sure you first touch the Mac's metal case and not anything inside.
    Now that we're done with the scary paranoia, below you will find some instructions on how I fixed my MBP's internal fan
    Before you begin:
    Check out someone's video (not mine) on how to remove / replace the fan (but not take it apart and repair it):
    http://www.youtube.com/watch?v=AghE9newvbs
    Check out someone's web page (not mine) on how to replace the fan in a mid 2009 MacBook Pro:
    http://www.ifixit.com/Guide/Installing-MacBook-Pro-13-Inch-Unibody-Mid-2009-Fan/ 1338/1
    How to repair your mid 2009 MacBook Pro fan:
    Make sure you are in a 'secure' environment. No pets, no kids running around, no drinks near the Mac, etc. 
    Make sure your computer is unplugged from it's power supply and turned off. NOT slept. Totally off / powered down.
    1. Get a size #00 phillips screwdriver (Hobby store, Radioshack, Amazon).
    2. Open up your MBP by unscrewing the bottom (yes flip it over so it's resting upsidedown). Note where each screw goes because some are different lengths. I placed each one around my MBP where they go, insuring I know their order (don't jumble them up). Note which direction your MBP is facing when it's upside down so if you spin it around while working on it you still know where the screws go.
    2b. Some recommend removing the MBP's battery but I didn't do this step. You probably should, just to be safe. Follow the online instructions from the web page I listed about disconnecting the battery.
    3. Unscrew the fan's 3 holding screws.
    4. Unplug the fan's electrical connection (lift it straight up off the board). If you need to you can try to pry it up while you lift with a non metal/non electrical conductive object like a spudger if you have one or -perhaps a pen cap. Before you remove it, look closely at how it's attached so when you put it back on you won't wonder if you're doing it correctly. There's only one way it can go because it cannot fit 'the wrong way' but looking at it closely will make you feel more confident popping it back on when the time comes.
    5. Remove the fan - it easily lifts out.
    6. Take the fan apart by unscrewing it's one screw then unlatching the  plastic clips which hold it together.
    7. Seperate the fan blades from the housing. Lift the fan blades off of the fan housing by pulling it straight out away from the housing.
    8. Clean off the dust that's gathered. A can of compressed air helps here (I didn't have one). I used a little brush from my electric shaver kit which worked well. Once you've removed all the dust from the fan and surrounding areas proceed to the next step.
    9. Reapply new lubrication. You need less than 1 drop. Be sure it covers the entire fan blade axl as this is what needs to be well lubricated. Make sure there isn't excess oil that will fly around when the axl/fan spins at high rpms. I used the only oil I had which was olive oil (for cooking!) but I do not suggest this. At the time I was doing this I didn't know my fan was the problem so I wasn't even sure I was going to relube it. You should probably use something more appropriate perhaps like 3 in 1 oil. A good idea would be to call the manufatures of these little fans and ask them. Maybe a hobby store knows of good lubricants for these purposes?
    DO NOT use things like WD 40 as it's not a long term lubricant or so I've read.
    10. Once your fan is now clean and oiled (make sure there isn't too much oil) reassmble the fan.
    Push the fan blades/axl back into the housing shaft. Give it a few spins with your finger.
    Screw together the fan housing then reclip the clips.
    11. Place the now reassembled fan back into your Mac and screw it in place (3 screws).
    12. Reattach the fan's electrical wiring by gently pushing it into place. Make sure you've got the right end facing down before you push it in place.
    13. Once your Mac's internals are clean and reassembled, place the rear cover back on your Mac and screw it in place.
    14. Double check you didn't forget anything like screws, tools, etc.
    15. Boot up your Mac and monitor the temperature and fan speed using those programs.
    Compare the previous temps/fan speed to the current temp/fan speed.
    Run a high CPU intensive app where your computer has been slowing down.
    You should now have a happy Mac
    If you have this problem and this solution fixed it for you please post in this thread letting me and everyone else know!
    Hope that helps.

    Thanks for your lengthy reminder dude, I have a similar Mac with yours. I suspect its a software fault because it happens after I upgraded to Lion, 10.7.2.

  • Appeal to the moderators by users from Russia (sub...

    Hi all! My name is Alexander. I'm from Russia. My English is bad so I use an online translator. I am writing to you on all Russian-speaking users of Skype. The problem is this: recently, attackers have learned to delete accounts using the holes in the program. It is a very serious vulnerability just Skype: you can be banned for a short period any account with any balance, with any number of contacts. How does this vulnerability? Everything is very simple. By many accounts the sacrifice are listed in black list, report the violation. Of course you will say that this is just a security system. But many people are not honest. Evidence of deliberate blocking of accounts by attackers can be seen here http://community.skype.com/t5/%D0%97%D0%B0%D0%B1%D0%BB%D0%BE%D0%BA%D0%B8%D1%80%D0%BE%D0%B2%D0%B0%D0%... Russian-language Forum on Skype very much so on victims of the security system. You know, blocking the first two accounts with 1000 + contacts you could still endure. But now we are blocking Skype every day. This greatly hampered our work and business. I personally have blocked accounts: [Account names redacted to maintain confidentiality]. I am using Skype exclusively for work and permanent blocking someone brings me a great inconvenience. The talk ends with nothing. Support said that the account has been blocked under regulation 6.3. But I don't do spam-mail. There were times when I open Skype wrote "we will delete your Skype". It is the cry of the soul guys. I don't know what to do. Here is a link to the discussion of this problem on the Russian Forum, Skype http://community.skype.com/t5/%D0%97%D0%B0%D0%B1%D0%BB%D0%BE%D0%BA%D0%B8%D1%80%D0%BE%D0%B2%D0%B0%D0%... Skype does not have Russian speaking staff can help us. Support for Skype in no way agrees to razbanivat′ accounts. I'm not the only one. Us hundreds of casualties. And soon there will be more. Please, please, change the security system of the affected people.

    Hi Alexander,
    The hole you are describing is known. There are certain teams working on it. So far, we do not have any public statement or ETA for the fix. None of the moderators are in a position to provide a fix for this problem.
    The best thing I can suggest is to ask CS to escalate it. If they refuse, ask to escalate again and again, until they do this.
    Добавляйте баллы, если моё сообщение вам помогло. Спасибо!
    Возврат денег | Система обновления подписок | Заблокировали/взломали аккаунт? | Пропали контакты? | Не зайти в Skype/не добавляются контакты? | Не удалось загрузить базу данных?
    Подписки | Цены

  • ATTN: Oracle North American Payroll Customers:End of Year Phase 1 and Q3...

    ATTN: Oracle North American Payroll Customers: End of Year Phase 1 and Q3 2007 Statutory Update Released!
    Dear Oracle North American HCM Customer,
    North American End of Year Phase 1 and the United States (US) Third
    Quarter Statutory Updates (Q3), 2007 have been released!
    US Q3 2007 Statutory Update patch numbers:
    * R11i: 6155000
    * R12: 6155000
    *Note – FPK RUP2 is not required for the US Q3 2007 Statutory Update
    End of Year Phase 1 (includes Q3 Statutory Update) patch numbers:
    · R11i: 6133333
    * R12: 6133333 (targetted for October 8th release)
    We would like to make you aware of several important points. Please read
    this entire note carefully.
    1. US Q3 2007 Statutory Update highlights
    2. End of Year Phase 1 highlights
    3. Other Important Notes
    4. Lifetime Support Policy: Coverage for Applications
    5. R11i HRMS Product Information
    6. Payroll Recommended Patches
    7. HR Recommended Patches
    8. Other Information
    A. US Q3 2007 Statutory Update highlights
    * JIT and School District Updates
    * Miscellaneous Statutory Bug Fixes
    Please see the readmes on Metalink for full details:
    3rd Qtr 2007 US Payroll Readme for Rel 11i – Note: 458431.1
    B. End of Year Phase 1 highlights
    US:
    * JIT/Geocode updates
    * Annual Geocode Patch Released
    o Patch 6117000 11i one-off released 04-Sep-2007
    o Included in EOY Phase 1
    o Readme Note: 456835.1
    * Wage Accumulation
    o Significant enhancement to the way the application
    accumulates wages for reporting
    o Joint project with Vertex to enhance processing of
    reciprocity rules at state and local levels
    o Changes within the Vertex engine allow for improved handling
    of multiple work jurisdictions
    o Provides users with the ability to control how work taxes
    affect taxes at residence locations and if wages should be
    accumulated at employee’s residence location
    o Readme Note: 460678.1
    o
    Note:
    Quantum 2.9.1 will be the pre-requisite for End of Year 2007 processing
    Additional Updates included in 2.9.1:
    o 5520588 – Resident State Tax Not given credit for Work State
    County Tax Withheld (Lives in NY works where ‘local’ tax is
    withheld)
    o 5897764 - FIT W/H Should be 35% After $1M Supplemental Wages
    even if Employee is Exempt
    o 5937604 - Delaware state income tax is being over-withheld
    on the second (and subsequent) supplemental payments in the
    same pay period.
    o 5730236 - YTD EI Deduction Stopped at 729.29 INSTEAD OF 729.30
    Evergreen Forms:
    The following forms are available from Evergreen for W-2s and 1099-Rs
    · Blank perforated W-2 #5208 Window envelope 4444-1
    · Blank perforated 1099-R #5179 Window envelope 6161-1
    · Preprinted W-2 #5218 Window envelope 5151-1
    · Preprinted 1099-R #7159-4 Window envelope 7777-1
    **Note: This is the last year we will support the preprinted W-2 and
    1099R. For EOY 2008 we will only support the pdf version of these two
    reports that print on blank forms.
    Customers can order forms at 800-248-2898 or go to www.evergrn.com
    <http://www.evergrn.com>
    RR Donnelley (formerly Moore) Forms:
    The following forms are available from RR Donnelley (formerly Moore) for
    W-2s and 1099-Rs
    * Blank perforated W-2 (with printed instructions on back) -
    LW28700BW (50 PK)
    * Blank perforated W-2 (with printed instructions on back) -
    LW28700B (2000 BULK)
    * Blank perforated W-2 (blank on back) - LW28700BLANKW (50 PK)
    * Blank perforated W-2 (blank on back) - LW28700BLANK (2000 BULK)
    * Window envelope for W-2 - 7987E
    * Blank perforated 1099R (with printed instructions on back) -LR4UPB
    (50 PK)
    * Blank perforated 1099R (with printed instructions on back)
    LR4UPBBULK (2000 BULK)
    * Blank perforated 1099R (blank on back) - L4UPBLANK (50 PK)
    * Blank perforated 1099R (blank on back) - L4UPBLANKBULK (2000 BULK)
    * Window envelope for 1099R - DW4ALT
    Customers can order forms at 877-526-3885 – reference Oracle customer #
    521836
    Canada:
    * Miscellaneous Bug Fixes
    Mexico:
    * Miscellaneous Bug Fixes
    Please see the readme on Metalink for full details:
    US 2007 Payroll Year End Phase 1 Readme Rel 11i Note 456990.1
    US 2007 Payroll Year End Phase 1 Readme Rel 12Note 456991.1
    MX 2007 Payroll Year End Phase 1 Readme Rel 11i NOTE.458559.1
    MX 2007 Payroll Year End Phase 1 Readme Rel 12 NOTE.458566.1
    CA 2007 Payroll Year End Phase 1 Readme Rel 11i NOTE.458561.1
    CA 2007 Payroll Year End Phase 1 Readme Rel 12 NOTE.458563.1
    C. Other Important Notes
    US Check/Deposit Advice XML
    There are some additional dependencies for this patch that were not
    originally communicated. Applying the EOY Phase 1 patch first satisfies
    these dependencies. If there is a need to apply this patch prior to
    applying EOY Phase 1 we are exploring possible alternative
    pre-requisites and will send out a notice late next week with more
    information.
    * 11i one-off Patch 6399100 released 21-Sep-2007
    * R12 will be part of Release Update (RUP) 12.0.4
    Oracle will de-support the Live Checkwriter and Deposit Advice for US
    and Canada beginning with 2007 EOY Phase 1. Archive Checkwriter and
    Deposit Advice will continue to be supported. What this means is that
    new code changes and bug fixes will not be tested on the Live
    Checkwriter and Deposit Advice. Additionally, enhancements made to the
    Archive version will NOT be made for the Live version.
    Desupport of Standard Tax Interface
    Oracle no longer supports the Standard Tax interface. Taxes will
    continue to be calculated and tax rate changes from the Vertex Data
    Updates will continue. New code changes and bug fixes will not be tested
    on the Standard Interface and we cannot guarantee that all functionality
    will continue to work. Additionally, enhancements made to taxes will NOT
    be made for the Standard Tax Interface. We strongly recommend that you
    upgrade immediately to the Enhanced Tax interface.
    Vertex Customer Café:
    The Customer Café is a comprehensive online information source
    specifically for Vertex customers. It’s easier than ever to get the
    support and information you need to maximize your investment in Vertex
    products. Some of the many benefits to using the Customer Café include:
    o Access to monthly data download files, release bulletins, schedules
    and considerations.
    o Early notification bulletins, late rate notifications, and support
    notices.
    o Online Knowledge Center that provides quick answers to questions and
    issues.
    o Online inquiry submission
    o Access to fully-indexed online documentation for all Vertex software
    products.
    o Easy access to Vertex software training information and registration.
    To register for the Customer Café, just visit the Vertex website at
    www.vertexinc.com <http://www.vertexinc.com/>.
    Year End Information for Payroll:
    Family pack K rollup 2 (5337777) is mandatory for R11i Year End and is a
    pre-requisite for Year End Phase 1. This patch was released on Friday,
    June 22, 2007.
    The R12 RUP (12.0.2) is mandatory for year end for R12
    For the complete R12 Payroll Mandatory Patch List see Metalink Note 386434.1
    For the complete R11i Payroll Mandatory Patch List see Metalink Note
    111499.1
    <http://metalink.oracle.com/metalink/plsql/showdoc?db=NOT&id=111499.1
    <http://metalink.oracle.com/metalink/plsql/showdoc?db=NOT&id=111499.1>>
    For additional non-mandatory North American Payroll patches see Metalink
    Note 74292.1
    <http://metalink.oracle.com/metalink/plsql/showdoc?db=NOT&id=74292.1
    <http://metalink.oracle.com/metalink/plsql/showdoc?db=NOT&id=74292.1>>
    D. Lifetime Support Policy: Coverage for Applications
    Important Reminder:
    Please pay attention to the Oracle E-Business Suite Support dates for
    your point release. Statutory or regulatory updates are not available
    beyond the ‘Extended Support Date’.
    11.5.7 came out of Premier Support in May 2007
    11.5.8 will come out of Premier Support in Nov 2007
    11.5.9 will come out of Premier Support in Jun 2008
    Extended Support has not been offered for 11.5.7, 11.5.8 or 11.5.9
    Premier and Extended Support include - Tax legal and regulatory updates
    Sustaining Support Does NOT include new tax, legal, and regulatory updates.
    For the full definitions of what this means to an 11.5.7/11.5.8 customer
    please read the full fact sheet available at:-
    http://www.oracle.com/support/library/data-sheet/oracle-lifetime-support-policy-datasheet.pdf
    *NOTE: For 2007 Payroll Year End, minimally you will need to be on 11.5.9.
    E. R11i HRMS Product Information
    For the latest Oracle HRMS Product Family - Release 11i Information,
    please see Metalink Note:135266.1
    This page contains important information including:
    * High Priority Alerts
    * Mandatory Patches
    * Family Packs and Minipacks
    * Latest Legislative Data - hrglobal.drv
    * Maintenance Pack Information
    F. Payroll Recommended Patches
    The Payroll recommended patch spreadsheet Metalink Note 74292.1 contains
    additional features and functions.
    G. HR Recommended Patches
    The HR Recommended spreadsheet contains a list of patches needed to be
    in compliance for HR Statutory reporting i.e. EEO-1, VETS-100 etc.
    The spreadsheet is located on Metalink in Note number: 273196.1
    H. Other Information
    1. MetaLink - http://metalink.oracle.com <http://metalink.oracle.com/>
    <http://metalink.oracle.com/>
    MetaLink is a customer resource provided by Oracle World-wide Support.
    The Applications section of Metalink contains all the latest product
    documentation and documentation updates for Oracle’s products.
    2. Payroll World
    Payroll World is an email distribution list for North American Oracle
    Payroll customers used to quickly disseminate information regarding
    product updates, patches, and statutory changes. To be added to this
    email distribution list, send e-mail to: [email protected]
    <mailto:[email protected]>
    Subject: Oracle North American Payroll World Contact Update with your
    contact name, CSI number, and company name
    3. Metalink Service Request profiles:
    Please update all Service Request profiles on Metalink with any updates
    to Database Version, Product Version, and/or contact information
    Metalink->UserProfile button
    4. Information for NEW North American Payroll customers:
    A pamphlet is available for all North American Payroll customers
    explaining Vertex, Payroll World, SIG's, etc.
    The North American Payroll Handout document can be located in Metalink
    Note 316077.1

    Chris,
    If you are referring to (Patch 7395025 - Q3 2008 JIT SQWL UPDATE FOR R11I), then you can apply it on 11.5.9. Just make sure you have all pre-req. patches applied.
    Note: 737173.1 - 2008 US Payroll Year End Phase 1 Readme Rel 11i
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=737173.1

  • Message from Crystal Reports Design forum moderators

    Dear Crystal Reports Design forum Users,
    Moderators recently noticed some incorrect actions on the forum like duplicated questions, postings in wrong categories, postings with product key code information, etc.
    To make our forum more effective we would like to remind you, before posting your question, to please:
    1. Make sure youu2019ve got familiar with u201CRules of engagementu201D
    [https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement]
    2. Make sure Crystal reports Design is the right category for your question.
    u201CThis forum is dedicated to topics related to the creation and design of Crystal Report documents. This includes topics such as database connectivity, parameters and parameter prompting, report formulas, record selection formulas, charting, sorting, grouping, totaling, printing, and exporting. For questions related to custom application development using Crystal Reports, refer to the appropriate Crystal Reports forum under Business Objects SDK Application Development.u201D
    3. Search the current (Crystal Reports Design) forum for an answer or a solution.
    4. Search other Business Objects resources like:
    - Business Objects / SAP Notes
    [https://www.sdn.sap.com/irj/sdn/businessobjects-notes]
    - Business Objects downloads
    [https://www.sdn.sap.com/irj/sdn/businessobjects-downloads]
    - Business objects Articles
    [https://www.sdn.sap.com/irj/sdn/businessobjects-articles]
    All the best,
    Crystal Reports Design forum moderators
    Please note: This post is the reminder only and not designed for discussions.
    Edited by: Vitaly Izmaylov on Nov 10, 2008 10:02 AM

    I totally agree with Alex.
    With over 11,600 threads this forum is really "heavy".
    A few more categories would reduce the efford for searching and rise the effectiveness.
    This applies to a few more categories by the way.
    Nevertheless I'm also happy about the quit good support in this board.
    Greetings,
    Sebastian

  • To Moderators: I am not able to look all the replies in the forums.

    Hello Moderators,
    Well i don't know what happen to my browser or it is happening in all browsers.
    But i want to tell you that i am facing some problem in SDN formus.
    Its regarding showing 'REPLIES' of the questions.
    Please look into my points:
    1. Sometimes reply colomn shows -1 reply, how it can be possible.
    2. Sometimes it shows replies are ther but when you look into the question, no replies there.
    3. Sometimes it shows 0 replies, but when you look into the questions replies are there.
    I am totally confused by all this.
    I can write this mail directly to moderators, but i want to know one thing....only i am facing this problem or everyone facing this?? Or i can say this is something new in SDN, which i don't know?? Please help me.
    I don't want to disturb anyone, but i think i have a valid point to ask this to everyone.
    @Moderators: Kindly look into the matter.
    If this question is not meant for this forum, then please tell me the right forum for this post.
    Thanks and Regards.
    Deepak Sharma.

    Hi Deepak,
    I am also facing the same problem with my browser too. I am not sure whether this problem is from our end or not.
    But this problem has never happened before in SDN. Don't Worry SDN Support team will resolve this issue soon .
    Regards,
    Lakshman.

  • FAO: Moderators...     iMac Flat Panel broken

    Dear Moderators, 
    The Forum (ID=870) "Expanding your iMac (Flat Panel)" is coming up with 'Error' in both Safari and Firefox right now (so I don't think it's me).
    This is also causing errors on the iMac Flat Panel Category page where no posts are being listed.
    Thanks
    mrtotes

    Don, 
    Thanks, nice to know it wasn't just me.
    mrtotes
    Message was edited by: mrtotes
    Ah it seems all is well again....

  • Where are the moderators? [split]

    Dusty wrote:He's also basically taken over the forums here as head administrator in a system that was once governed by multiple moderators. Recent changes were made without any involvement of the other advisors.
    Where are these moderators you speak of? I haven't seen them anywhere... :?
    In my (very) humble opionion, if there are moderators, there aren't enough of them, and they aren't doing much around here. Why isn't there a system to become a BBS moderator much like there is a system to become a TU? Speaking only for myself (who wishes no part in being a TU or a dev), I would love to be a moderator on the forums, but never saw anything about how I would become one or even who to talk to if I was interested.
    And yes, this is slightly OT, but I think it's relevent.

    shadowhand wrote:So there's a limited, set number of moderators? Don't you think that's possibly a little short sighted considering how fast the community has grown, and is still growing?
    Nah. Historically, moderation was done by the devs, but they kind of don't post here much anymore. When I resigned as a dev, I volunteered to stay on as the first moderator, although rasat was already an admin by then, and was also doing moderation tasks. If things seem out of hand here we'd pull a fifth onto the team.
    Also, has there been any consideration as to section based moderators (which a lot of larger forums do),
    Yeah, we did that for a while, but it tended to be over-organized. A KISS approach works better.
    Just some thoughts to toss around next time you have a super-secret-in-a-dingy-bar meeting that no one sees.
    Its not meant to be a secret -- we do have a forum that is moderator only. It rarely gets posted to.

  • Question to Forum moderators

    Dear moderators,
    Is there any person at Creative (other than customer support) to whom I could discuss the Sound Font and Midi issues with the X-Fi card?
    I have emailed customer support on several occasions, and was even directed to Developer Support regarding my issues with the card but haven't gotten an answer.
    To be honest, I'm quite frustrated with the fact that the sound card isn't 100% compatible with Sound Fonts and MIDI the way previous models were.
    If I can't contact somebody myself, would it be possible for you do send along this information to the correct people at Creative?
    This problem has existed since the card came out and we're coming up on 2 years since I first contacted customer support and still no fix for these issues.
    These are the problems with SF and MIDI:
    1.- Effects on Sound Fonts are close to non-existent no matter if you max the levels on them.
    2.- The card no longer responds to envelope controllers.
    3.- Polyphony number is MUCH less than that on the Audigy series and previous models (MIDI files I made with the SoundBlaster32 and sounded great now have notes cut off).
    I'm sorry if this in any way inconveniences you but I've tried the contact information on the Creative site without success.
    Thank you in advance for any help.

    perihelion54, I hear you. I can't help you, other than to offer my support. I have questions about the technical spec of the soundfont engine as well, and it's difficult to know where to get answers.
    The only reason I have an X-Fi is for the 24-bit soundfont feature. I haven't gotten into the detail of programming the X-Fi yet, although I have created soundfonts for the Live! and Audigy range.
    There's a few new features in the latest (2.4?) version of Vienna, so that might be worth a try. I have been using AWave Studio 10, which SoniVox also seem to use by times.
    Message Edited by jreid on 04-28-200708:09 PM

  • Note to Forum moderators/PR/anyone at Creative who will listen and A

    Dear Forum Moderators/PR punchbags,?It seems Creative doesn't mind continually taking punches from the general public, and the longer Creative waits, the more annoyed people are getting. We always hear the Creative moderators saying they are sending feedback up the corporate ladder, however we are yet to hear any form of decent news/updates on the X-Fi drivers which clearly have a multitude of issues. While I don't doubt the Creative moderators are doing their job, I (and i'm sure I speak on behalf of many others) expect to hear a decent reply from someone who has the authority to do so. We all paid good money for the product, and do not deserve to be ignored!?What do Creative have to say about the blatant ignorance of the existing "issue-ridden" X-Fi drivers for Vista? And what is Creative doing right now to rectify the issue? Why have so many good paying customers been left out in the dark for this long? And why do Creative continue to market the X-Fi as "Vista ready" when there is blatant evidence it is no where near "ready" for Vista?

    Watching NASDAQ on tues told something of what was discussed here. Creatives main problem is trying to be all things to all people and insisting on in-house manufacture of their computer peripherals. While they may be able to control quality somewhat, their competition has the edge in cheaper labour. Note, the drastic cuts in R&D in the last 8 months. This is all relati'vely normal for companies this size. One other thing that is making hard for them to be competati've is being an american based company. However, doubtful this is going to bankrupt them, or negati'vely effect them in a way that they cannot shake off easily. Guaranteed, if and when drivers & software are released, so present gen cards work with vista, the very small (albeit vocal) community here on the forum will tone down the rhetoric. Creatives money is not made in retail, it's made in wholesale contracts to the likes of Dell for example, and 90% of all onboard sound chips have been Creative Labs and will likely continue to be. (note X-fi chips sold to makers?such as?azureus) This entire fiasco has been a lesson in consumer strategies as companies push and pull the marketplace to suit their manufacturing needs, not fill a void?of supply and demand as we would like it to be. The reality is Creative is under very little obligation to support these cards under vista, is it a good business decision? I dont think so. It sure would be nice if they has some respect for the retail customer. Some good old fashioned?PR would be nice here too. Will this sink them? Probably not. Would we like them to go bankrupt and send apology emails to all of us? Absolutely, nothing less. Is that reality? No. I simlpy won't put this much emphesis on my computer systems sound functions until I see what is being manufactured. And there are some really really good looking contenders right now. And several more to be released over the summer. In retrospect, this is a good thing Creative are doing by throwing the market wide open. This has been longed for, almost 8 years now. Don?t get me wrong, I still think this was and is a truly crappy thing they are doing, but in the long run, we win, becasue finally, we will have cards that rock, and people that care about the end user.Message Edited by scorpion_saga on 05-03-200703:30 AM

  • To moderators : corrupted file in Crystal Reports XI R2 download area

    Hi Moderators,
    Regarding this thread : CRXI R2 SP4 : Installation problem , the SP4 full build is corrupted.
    Is the possible to correct this ?
    Thanks and Best Regards,
    Phil

    Has there been any update on this?
    This is now two important updates that have problems, and I find this unacceptable:
    Crystal Reports Server XI R2 SP4 - crsxir2win_sp4.exe:
    While installing: missing cab file m293.cab
    Crystal Reports XI R2 SP4 Full Build - crxir2_sp4_full_build.exe:
    Can't install: installer is corrupt

  • Dear Moderators

    Dear Moderators,
    Can we make a rule for General Posting..?
    For example:
    If, there are general queries like:
    Posting only possible in periods 2009/01 and 2008/12 in company
    or,
    Account xxxxx requires an assignment to a CO object'
    or
    What is Third Party Sales Process
    and many more...
    for which 100s of threads, with Solutions, are already being available in [Search Forum|https://www.sdn.sap.com/irj/scn/forumsearch]
    and if, User puts the similar kind of Queries (repeatedly, again and again) and he does not provide his Research-work (before posting the threads); in such case -
    USER must get Blocked, from the Forum.
    This will reduce the No. of Unwanted queries, in to Forum. This will also ensure the Quality of the Forum. This will restrict the Ill-Practices, in to the Forum.
    No matters, what Moderators and Other Members, are gonna think up on this suggestion; This was my responsibility to Provide something Constructive-Feedback, to the Forum, which has given me alot (in SAP Knowledge sense).
    Best Regards,
    Amit
    Note: Make User more responsible, while putting the Queries/ issues, in terms of:
    1. How much efforts, have been taken by themselves?
    2. Query must be meaningful, in sense, what is the requirement and why it is reqd.

    Dear Amit
    All these years I have been requesting members to search the forum before posting silly / basic questions and only very few members have taken my request in right spirit and some have raised objection and at times, they have commented like anything which I dont want to express here.
    I am really happy that all members have the same opinion and going in right direction which is defintely an encouraging sign to this forum.
    All of you are aware Moderators are also doing their best by locking the threads then and there and giving a warning to the concerned but at the sametime, it is also very difficult to keep monitoring the forum regularly as they also have to work for their employers.
    Dear Mr.Amit on your comments
    USER must get Blocked, from the Forum
      I dont think practically this is possible. In fact  discussions are going on among Moderators and necessary steps are being taken then and there.  Also wherever any individual holds multiple user ids and rewarding themselves, they have blocked those user ids straightaway.
    This is due to the fact that many new members without knowing the rules and regulations of the forum, are posting such questions and despite the fact that they have been requested, many continue to do so.  As I always telling the forum, unless the individual have self discipline and maintain decorum, it will be hectic task to Moderators to bring controls in the forum. 
    This is not only in this forum but in all other forum also, these things are still continuing and there also, the respective members have warned.
    Anyway, I will take up with other Moderators about this issue and update.  But for posting repeated questions, blocking the respective user id may not be possible.
    thanks
    G. Lakshmipathi

  • ATTN NEED TO RECOVER OLD SKYPE NUMBER

    ATTN NEED TO RECOVER OLD SKYPE NUMBER Hello there...... I had a subscription and a skype number assigned. I let the number lapse and just realized it. I need to recover that phone number. I call it and it says it is out of service yet I cannot select it as a new number and I see no way to recover my old number within my account settings etc. Please advise and have a great day!!! Thanks have fun all the best!!! Peace................................................ward

    Hi, Loppies, and welcome to the Community,
    Your Skype Number should have been held in reserve for you to renew for a period of 90 days following the subscription end.  Beyond that timeframe, the number is released/recycled back into the system.
    Skype Customer Service may be able to provide more detailed information.  Here is a link to the instruction on how to contact Skype Customer Service via their secure portal: Contact Customer Service
    As you know you wish to contact Customer Service, skip past Step 2 of the instruction and proceed to Step 3, Continue Support Request. You may also skip past in Step 4 where you will be referred back here to the Community; no need to do this as the Community is where you started!
    Regards,
    Elaine
    Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
    Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

Maybe you are looking for