Audigy 2 ZS WinXP x64 problem. Doesn't support 4G of r

So, I installed extra 2 gigs of memory. I had already 2 gig, so now i'm at 4 gig.
Problem is that Audigy stoped having hardware acceleration.
My system is:
AMD X2 4400+
Asus A8V-E SE
4g RAM
A2ZS
Tried new and older driver.
I had no problems before extra RAM.Message Edited by Audiox on 02-02-200705:33 PM
Message Edited by Audiox on 02-03-2007:59 PM

I can confirm that I have similar problem with SoundBlaster X-Fi XtremeMusic, 4GB RAM, Windows XP Pro x64 Edition.
No hardware sound buffers. This basically means my games are NOT hardware accelerated.
I bought this card so I could have hardware acceleration and I could dump my Realtek on-board AC'97 audio.
I'd like to know how this can be fixed and when can we get working drivers for 4gigabytes of RAM ?
4 Gigabyte will become common soon when Vista will be more used, since Vista uses a lot of memory.

Similar Messages

SATA RAID problem on K8N Neo2 Platinum (nForce3 ultra) & winXP x64

I entered on MSI driver dowload page, put my model, and i found out that the RAID driver for win x64 wasn't released (nforce3 ultra), but in the same page was the driver for the nforce4, so I supposed it was compatible. I made the driver disk. press F6 and he askme for the drivers, ok, i introduce BOTH drivers, he detects perefctly the SATA RAID (stripping) format the disk, copy the files and ask me for some .CATof teh raid driver that wasn't on the zip file.... omit files, reboots, completes the instalation, but on the first boot of win x64 when it's just about to show the windows screen, a bue windows, and resets the pc so fast that's unreadable. fail safe start.. same crash.
I Installed win on an IDE and it run prefectly... In th other hand... without installing any driver the windows instalation recognices the SATA drives, but not the RAID. Maybe I just got to install the raid driver but not the SATA driver... the nforce3 driver form nvidia.com is pretty old... The real funny is that when i installed winXp x64 BETA i hadn' any problem... (winXP 64 doesn't admit the 32 bit driver=
Which driver i'm supposed to install? to INSTALL winxp64 on a SATA RAID and make it boot from there?
Thaks a lot

HI! i'm the one wih the raid problem on a k8n neo2....
That's what a i Did.. i unpacked the exe and copy the files in a floppy... question is: if i do that, windows instaler askme for some files that aren't in the .exe, anway it reconices the raid and everithing goes fine until the first BOOT on windos... it shows a blue screen, butremoves it so fast that i cant read it or pause the system. But i know it's a raid problem because if i install it on a ide disk it works.
The nforce3 drivers are almost a year old, and i'm not sure if nforce4 is compatible...
I think the're compatible because if you enter in msi driver download page and select my model, they put the Nforce3 and nforce4 for win64 and my model is only nforce3. The thing is they havent released the nforce3 for WIN 64.... So.. It's normal that win asks me for some files that ain't in the .zip file (i extracted the files o course) and Which driver should i put the Nvidia one year old nforce3 or the new nforce4. (the nforce3 for 32 bits is rejected by windows) or... i have to wait the new nforce3?
thanks for helps

WTF Creative fix winXP x64 driver new beta drivers still have the 4GB memory limit is

SBAX_PCDRVBETA_US_2_8_000.exe
I just pop in my audigy 2 ZS to see if beta drivers released June 8 fixed the no 5. issue with pass drivers unless u had no more then 4GB or limited the OS to 4GB using boot.ini
*no sound from my center and rear speakers
"the Known Issues:
* When using 5. Speaker configuration, no audio output from the Center/Rear channels.
?? To restore audio output in Windows XP: Launch Play Control Panel, click the Speaker Volume button, then click the Restore Defaults button."? (did not work no matter how many times i tried it's + also did numeros reboots)
doesn't work ? only after adding /MAXMEM=4096 did everything start working like it should.
my computer has 8GB of ram and by using this fix the other 4GB go to waste why is this issue fixed on Vista x64 drivers but NOT on XP x64
come on Creative WTF?:angry:
so creative nothing was fixed for WinXP x64 with this beta driver !!!!!!!!!!!
Message Edited by ATT-Half on 06-25-2008 07:8 AM

Re the F8 trick: Thanks. Still very annoying, as it needs to be pressed and selected on every boot. Still, it's a workaround. Re "hey it's only beta" and "not signed on purpose", I will argue that not signing drivers puts an unneccessary installation hurdle before the user. Worse, it is not readily apparent how to circumvent that hurdle. That drastically reduces the number of users that will install and use the driver, and could thus give feedback on it. My assumption is that Creative have released the beta drivers publically to get a wide range of good feedback on their performance. Also, to give the most impacted users an alternative to just removing their Creative card and falling back to onboard sound. Both objectives are more easily achieved if the driver can be installed - and used - without needing to go through an F8 boot menu on every startup. The driver is already designated as beta and carries a prominent expiration date. Not signing the driver does not do anything to alert the user of the fact that this is a beta that the expiration date popup did not already do. Look to graphics cards. You will find beta drivers there, released mainly to relieve pressing issues in-between driver releases. Those drivers are signed, yet no one doubts that they are beta drivers, not least because they are released on a page that displays a very prominent BETA logo. Creative has goals in publically releasing beta drivers, which won't be met if users can't install the drivers.

ORA-12154 on WinXP x64

Hello,
I have a WinXP x64 with Oracle Client 9.2
it works fine with SQLplus,SQL Navigater and XAMPP server
but with Golden and Crystal I get everytime an error
"ORA-12154 could not resolve service name error"
with a normal WinXP SP2 I did not have problems
Has anyone a solution for my problem?

Did you ever find a solution? I have the same problem.
I have tried the Oracle 32 bit and 64 bit client applications. Both were installed in C:\oracle\product... when I tried them. The 32 bit client was 10.1.0.2 and the 64 bit was 10.2.0.1. Both will not allow me to use an ODBC connection in MS Access.
MS Access is part of Office 2003 and is installed in the C:\Program Files (x86) folder. I even tried installing Access from Office XP in C:\Program Files and had the same results.
I have tried creating the ODBC connection from Control Panel>Administrative Tools and from C:\Windows\SysWOW64\odbc32.exe. Both would let me connect to Oracle successfully, but when I try to use them in MS Access I get errors. For the 64 bit ODBC driver I get an error that it isn't installed, and for the 32 bit ODBC driver I get an ORA-12154 TNS names error.
HELP!

Audigy 2 ZS, Vista x64: Finally got bass redirection working!

=Audigy 2 ZS, Vista x64: Finally got bass redirection working!B Hey guys,
I have hooked a Teufel Concept G to my Audigy 2 ZS. The Speakers do not have internal cross mix, so unless the sound card provides a bass signal there will be NO bass at all. This has not been a problem under linux, since it automatically configures the sound card to send out bass, but very frustrating in Windows Vista x64. GTA4 is no fun without bass ;-)
After endless searching and messing with different drivers (breaking the whole vista sound system) I coincidently got bass redirection (and CMSS2 apparently) working today.
These are the steps I took:
. Fresh install of Windows Vista x64
2. Installation of Audigy 2 drivers provided by WindowsUpdate, did not download from Creative Labs
3. Use an old CtPanel-App which actually could activate bass redirection and CMSS2?
I uploaded the App:?
http://www.megaupload.com/?d=L6J0ZJVA
If you start the App it will take ages until it pops up, but then it works just fine. Feedback appreciated!
regards
Tiedemate?

I also have the same problem, sound stop working after getting SP2, I updated vista to SP2 because I want to update to windows 7, with win 7 I have try all the drivers without success I still have no sound and with some drivers I get a blue screen. After 2 restarts windows 7 ask me to fix the problem with restore and vola everything works ok but no sound.
I am trying this:
http://forums.creative.com/showthread.php?=35324

Audigy 2 nx power loss problem

hello fellow audigy 2 nx users. If you are like me, you bought a second power adapter for it as the one that came with it doesn't work too well. Well I'll explain what happened first before I explain how I fixed it:
I was listening to music in winamp and the power cable came unplugged. I tried replugging it and nothing happened. It was off of warranty, so I thought why not pull it apart and find the problem. I got it apart but couldn't find anything wrong with it. My multimeter said the voltages were all good and I was stumped for a bit. No lights would come on when I plugged in the power (not even the optical out light). I thought I was somewhat out of luck, so I packed it up as I didn't want to pay to have it fixed when my onboard still worked (as bad as it sounded).
now how did I fix it you ask. Well, I was expirementing with the card a bit. I plugged my headphones into the headphone jack and plugged in the power and heard a pop. So there was something happening inside. I tried all of the plugs and when I plugged it into the "front" plug, I noticed the optical out light up. I thought "hmmmm" and left it plugged in for about 5 minutes and presto; it worked. I unplugged the power and the front audio line and then plugged the power back in and nothing.
So, for my card anyways, it takes a few minutes and requires something to be plugged into the front out when starting up from a power loss state, but the power button works, the mute button works, everything works now.
I only had the power and front out plugged in when I got it to power up the first time, and the second time I had the usb, power and front out plugged in.
Go me, and I hope this helps others out there... feel free to e-mail me at [email][email protected]][email protected][/url] if you have any questions as I don't usually check the forum unless I am having troubels... and I usually fix it on my own as opposed to the forum providing me with the solution...
Good luck to all you audigy 2 nx users out there...
The Gh0ce_>0
Message Edited by Gh0ce on 07-05-2006 05:58 PM

EDIT:
OK... this seems to be only a temporary fix... I noticed the card overheating something nasty (the NX not the power supply), so I unplugged it when I went for a quick walk (2 hours later), this method no longer worked for powering it up... gonna pull 'er apart and see whats up... will post more as I figure things out...
Message Edited by Gh0ce on 07-05-2006 09:9 PM

EDIT:
Upon closer inspection, this method seemed to only work once. I pulled it apart (and it is currently sitting taken apart on my lap) and with the front out plugged in I can get the optical out to light up, but otherwise it is dimmed out. The temperature problem doesn't seem to be affecting it as of right now (ie it is not overheating), but the chips labeled on the board as d, d2, d3, and d4 all have some brown stuff around them (especially d2), so I am thinking that could be the cause of the problem... gonna do more expirements to find out for sure, and post the results... good luck to all those people like me...
Message Edited by Gh0ce on 07-05-2006 09:39 PM

Last edit for the night:
It looks to me like mine is pooched (or foobared). It no longer powers up, but power goes out across the majority of the board (I cannot find the problem though)... might try more tomorrow... dunno yet... good luck to everyone else, and sorry I couldn't be more help...
Message Edited by Gh0ce on 07-05-2006 0:20 PM
EDIT:
I left it plugged in for a few hours as mentioned above (power and front out) and it eventually powered back up. The card works again... sort of... it seems to have a problem with overheating if left on for an extended period of time (several hours) so I think that this is more of a temporary fix than a permanent one... good luck to all those who are having a similar problem...
Message Edited by Gh0ce on 07-06-2006 2:24 PM

Hi Guys,
Sorry but I couldn't see any professional answer on this issue even though the creative representati've tried but his answer was too faint and doesn't have the right answer!
No matter if ur unit Audigy2 NX is connected to ur PC or not, and if it is connected to the main power then the lights have to be on and the device should function when u turn the power on.
If for any reason the lights get stucked and lights keep on it means u have a malfunction in the unit itself, it doesn't have anything to do with any windows drivers at all, sometimes humidity is such an enemy for those touch buttons devices, the device has to be opened and to be check by a pro.
As for having no power at all, no lights will go on when powering up, u need to check the output voltage coming from the main power source with an avometer to make sure that there is an output voltage, if the adapter is getting hot still it doesn't mean that there is an output voltage at the end at the cable itself might be broken somewhere in the middle or by its end.
If your adapter is deli'vering the right voltage as it is printed on the same adapter then the device needs to be opened by a pro and some power transistors might need replacing or as per the pro decision.
Cheers all and take care ..
Message Edited by Aulic on 08-05-2005 2:46 AM

K8N Diamond Plus SiI 3132 WinXP x64 non-RAID drivers?

Hi
I'm looking for non-RAID drivers for the SiI 3132 on my K8N Diamond Plus for WinXP x64 (I managed to fine the x32 ones and they work fine so I know it's not the drives or the moboard. I tried the drivers on MSI's website.
I've searched around the forum and followed the leads onto planetamd64 and the Asus website for them, but to no avail.
To be precise, I have selected non-RAID in the BIOS, and the drives to show up on on the POST screen, but do not appear in Win 64; there is the classic exclamation mark in the device manager for a 'Mass Storage Device'. I don't want to concatenate the drives in RAID mode, so I did not try booting with that selected in the BIOS lest it destroy the stuff I have on them.
[I miss the simple JBOD option in the 3114...]
Any help gratefully appreciated!
thx
bn

Hi all,
I solved the problem.
You won't find the drivers under the drivers section of SiI's website but you will in the Knowledge Base. Look under Serial ATA | COntrollers | SiI3132, you'll find article 11043 'SATA 64 bit Windows IDE driver - released' dated 8/19/05. Click under that and you'll find a file 3132_win64_idrv_1004_logo.zip. It's what you need.
Hope this helps someone.
bn

HT4009 IX have an iPad version 4.3 and I had instagram install, like I was having problem I uninstalled it, but now I can't install it again, because my iPad doesn't support the new version, is there a way that I can download instagram for this iPad?

I have an iPad version 4.3 and I had instagram install, like I was having problem I uninstalled it, but now I can't install it again, because my iPad doesn't support the new version, is there a way that I can download instagram for this iPad?

Update your iOS.
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1.3. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
 Cheers, Tom

After Update to iOS5, i can't synchronise my films, showing me 'error 19', your iPad doesn't support this videoformate..any ideas to solve my Problem?

After Update to iOS5, i can't synchronise my films, showing me 'error 19', your iPad doesn't support this videoformate..any ideas to solve my Problem?

To delete, tap "Edit" (tap to enlarge image)

Shockwave Player 11.6.0.626 will not work on WinXP x64

OS: WinXP Pro x64, fully patched (sp2)
Browsers: IE8, Firefox 4.0.1, Chrome (most recent version as of 6/15/11)
Shockwave 11.6.0.626
(Flash 10,3,181,26)
IE8 - cannot read Flash/Shockwave test page: tab crashes with Windows crash of something regarding "AutoComplete".
Firefox 4 - Shockwave plugin appears to be installed, but plugin not detected on Flash/Shockwave test page (Shockwave area of page is blank).
Chrome - "Missing plugin" for Shockwave.
All previous versions of Shockwave worked perfectly on this computer in all browsers.
Any ideas? Was this version of Shockwave tested on WinXP x64?

This error is in the System event viewer:
Generate Activation Context failed for C:\WINDOWS\system32\Adobe\Shockwave 11\DYNAPLAYER.DLL. Reference error message: The system cannot find the path specified.
As I mentioned earlier, there is no C:\WINDOWS\system32\Adobe\Shockwave 11 directory, Shockwave was installed to C:\WINDOWS\SysWOW64\Adobe\Shockwave 11.
Looks like a bug to me. Is there a workaround?

I just recently updated to the OS X soft wear and every time I go on iPhoto or iMessage my computer shuts down. This problem doesn't occur when I log into my laptop as a guest. I have a Mac book pro made in 2010.

I just recently updated to the OS X soft wear and every time I go on iPhoto or iMessage my computer shuts down. This problem doesn't occur when I log into my laptop as a guest. I have a Mac book pro made in 2010.

Any error message?

WinXP reboot problem

Hey... when I've installed Windows XP and choose to run it in the os meny, the computer just reboots. I've tried different versions of XP still same problem. Safe mode or command prompt doesn't work either.
The thing is, I have tried to install XP many times now and I've had different error messages but I have always been able to boot XP. Now, without a reason, the computer just reboots! Very strange.

Hardware:
Athlon 64 3000+
MSI K8T NEO-FIS2R
TwinMOS PC3200 DDR-DIMM 512 MB m/Winbond (400 MHz)
Maxtor DiamondMax Plus 9 160GB S-ATA - S-ATA/150 8MB cache
PowerColor Radeon 9660 256 MB DDR
CNet PCI Fast Ethernet Adapter (didn't know the motherboard had integrated network card :s)
I'm pretty sure it's my HD that messes up the system.
Drivers:
VIA Serial ATA RAID Controller
VIA ATA/ATAPI Host Controller
Promise FastTrak 376/378 (tm) Controller
Promise SATA-150 TX Series (tm) Controller
Okey... first I had a problem with a bluescreen when trying to install XP. This was fixed by disabling the external cache and shadowing in BIOS. I'm running ME as my primary and active partition, having XP to test on the other partition as logical. Tried to set it to active but the meny where you would choose OS didn't appear. But I'm still saying that I've been able to run XP before on that partition...
1. I started with loading all the drivers with F6. Then when the installation run there were 2 pop-up error messages about something that the VIA SATA drivers didn't support XP... not sure what it stood but I clicked continue. So when I run XP and installed the drivers and tried to update with Windows Update, a message appeared on the screen telling me to shut down all work because the computer is going to restart in 60 seconds. I guess it has something to do with the error messages earlier when I installed. So the message kept coming up every time I booted up XP and there was no way of canceling it. I realised I shouldn't load both drivers (stupid me), I thought both were needed to get rid of the "can't find HD screen", but then I read on this forum that you should load either VIA or Promise...
2. I tried to load the VIA drivers, but then a bluescreen appeared so the VIA drivers were not an option.
3. Then I tried the Promise drivers, and it worked. No error messages during installation either. But then after the installation, all of a sudden, when I choosed to boot XP, the computer just rebooted!
4. I tried to install another time loading all the drivers. Now, the error messages didn't appear (they should had!) BUT the computer reboots when I choose XP... and now I can't even get XP to boot I don't know what the h*ll happened!
I'm sure if I could get rid of the reboot problem I could try install Promise drivers again and check if it would work correctly. Running BIOS 1.20 update. And I have tried to get XP to work in 2 weeks now and reinstalled XP over and over again, deleeting the partition and then creating new NTFS with quickformat. I'm getting tired of this as my ME partition can't run any games because the latest graphic card drivers doesn't support ME... If I just had choosen to have the OS installed (like an 120$ extra) when I ordered the computer I wouldn't have all those problems... but then I know it is POSSIBLE to get XP to work or else they wouldn't have the installation option when ordering!!
This is as much info as I can give you... hope it helps.

Wave Studio says "device doesn't support this format"

?Wave Studio says "device doesn't support this format"'I have a X-Fi Extreme Music card I'm using in Windows 7 (x64). I haven't had any issues with the card or the software until I installed a codec pack: Shark Windows 7 Codec pack. It worked OK, but when I try to play a WAV file in Creative Wave Studio (7), I get an error message: Sorry, your audio device doesn't support this format". Weird, since Wave Studio's "nati've" format is WAVs!!
So I uninstalled Shark, uninstalled Wave Studio, and uninstalled (from Device Manager) my sound card. Rebooted, then reinstalled the driver for the sound card, rebooted and reinstalled Wave Studio. I still get the error message and can't play WAVs in Wave Studio. The version is 7.2, and the driver is 6.0..375 (5/5/200). Anyone have any ideas?
Thanks,
Laner

CThe point is moot now, I've gotten a new computer and installed the card in that machine. Everything works great now. I would imagine there was a registry issue that didn't get cleaned, or something similar. Still, it would have been nice to resolve the problem, as someone else might experience the same issue and could find a way to help get it taken care of.
Cheers,
Laner

MAC OSX 10.4.11 I finally succumbed to the constant irritating messages telling me that I didn't have the latest version. My old version and all my bookmarks have been deleted my Mac says it doesn't support Firefox! How can I recuperate my old settings?

MAC OSX 10.4.11 I succumbed to the constant messages telling me that I didn't have the latest version, despite being happy with the one I had. My old version and all my bookmarks have been deleted and now my Mac says it doesn't support Firefox!!!!! How can I recuperate my old settings? in English

Firefox 4 versions and later '''do not run on a PowerPC Mac''' (like yours) and require '''at least OS X 10.5 and an Intel Mac'''.
The latest supported version for your os is '''3.6.27''' , you can download it from:
http://www.mozilla.org/en-US/firefox/all-older.html
1. Download a 3.6.27 copy of the Firefox from the above link
2. Trash the current Firefox application to do a clean (re-)install.
3. Install the new version that you have downloaded(3.6.27)
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so probably you won't lose your bookmarks or other personal data, if you don't already ''totally'' uninstall firefox(user data and settings like bookmarks, extensions, etc. located here: ~Library/Application Support/Firefox so you must uninstall it separately, to totally uninstall firefox).
see also : [https://support.mozilla.org/en-US/kb/Installing%20Firefox%20on%20Mac Installing Firefox on Mac]
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

Ehlpdhtm.js script error - Object doesn't support property or method 'Activate'

RH 9.0.2.271
Windows 7 64-bit
This "Object doesn't support property or method 'Activate' ehlpdhtm.js error all of a sudden started popping up when I view any of the chms I build from my file system.
I initially through it was a 64-bit problem because if I view the chm from my file system I get the script error. But if I copy it to a 32-bit PC or run it from within RH (after it's compiled for example) or a 32-bit version of our software, it runs fine. (However, one of my co-workers tried it on her 64-bit machine and didn't receive any error.) In any case, it seems to be happening on my machine only.
Anyway, it's not on every topic, but on every one that calls the ehlpdhtm.js script with this line of code, it appears to be happening:
<script src="ehlpdhtm.js" type="text/javascript" language="JavaScript1.2"></script>
I don't think hhactivex.dll plays with this js at all, but just in case, I unregistred and re-registered that dll to no effect. I also tried explicitly adding in ehlpdhtm.js as a baggage file. Again, to no effect.
What could have changed on my system to make this start happening? And any ideas on how to fix it?

Well here's some more info I found out. If I unregister the 64-bit hhactivex.dll the script error goes away. Of course my Glossary tab is grayed out as shown below, so that's not really an option:
Reregistering the 64-bit hhactivex.dll again shows the script errors. Plus, if I then go to my glossary it's completely empty as shown here:
If I copy this help down into a 32-bit machine everything works: the glossary has glossary terms, there's no script errors.
In short, I don't know what's going on, but the script error I'm getting is somehow related to having the 64-bit dll registered.

Audigy 2 ZS WinXP x64 problem. Doesn't support 4G of r

Similar Messages

Maybe you are looking for