Audigy SE - mic input suddenly stopped working

.Audigy SE - mic input suddenly stopped working6 I use a Creative Audigy SE sound card and it has worked fine since the day I bought it until recently the mic input stopped working.
Fair enough, I tested with spare headset in case headset was faulty. No workie. I tested headset in laptop - workie.
So I bought a replacement card, no workie. I get sound out, but cannot get a signal on my mic when connected.
I have troubleshooted this extensi'vely (checking the settings in the creative panel, windows control panel, the mics mute switch is not on) and have run out of leads.
edit: i have also updated drivers and tried a different pci slot.
Message Edited by rdegan on 07-4-2009 0:47 [email protected]

So after my mic input stopped working on my Soundblaster Audigy, I have done the following troubleshooting:
- checked headset works in another computer;
- bought a brand new sound card;
- checked all driver settings for an accidental mute;
- updated sound card drivers;
- ensured on-board audio is disabled;
- formatted windows XP;
- Run XP control pan audio diagnostics.
Still I cannot get sound on my Mic input. My sound output to headphoes is fine. Can anyone offer any other trouble shooting?

Similar Messages

Mic suddenly stopped working

Okay so. I have a Turtle Beach Ear Force X12 headset which has been working great since I got it a couple months ago, well today it suddenly stopped working skype says my mic is muted and it's not, I can hear myself through the headset which means it's on and at least working but apperently it's my computer that's not picking it up and I have no idea what it possibly could be, I'm on Windows 7 btw.
Also skype kept moving the mic volume thing all the way down but I don't know if that's related at all.

When I make a call my mic doesn't work. Looks like I'm not the only one experiencing problems. Skype is slow and often won't even hook up. Tried my wifes mac with same result, my blackberry phone same result. I've become aware of how dependend on SKYPE i am.

All input devices stop working suddenly

Every now and then ALL input devices stop working,ths is not temporary - a forced shut down is needed
What happens is that I am happily working away when suddenly all input devices stop working with no warning, so the light goes off on my Wacom (Intuous 3) tablet, the keyboard and the apple trackpad are not responded to i.e. the cursor stays where it was on the screen prevously and I am left with the only option to restart by holding down the power button
any thoughts or similar experiences

If you don't already have a current backup, back up all data before doing anything else. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem. The backup is necessary on general principle, not because of anything suggested in this comment.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The procedure will help identify which such modifications you've installed, as well as some other aspects of the configuration that may be related to the problem.
Don’t be alarmed by the seeming complexity of these instructions — they’re easy to carry out. Here's a brief summary: In each of two steps, you copy a line of text from this web page into a window in another application. You wait about a minute. Then you paste some other text, which will have been copied automatically, back into a reply on this page. The sequence is copy; paste; paste again. That's all there is to it. Details follow.
You may have started the computer in "safe" mode. Preferably, these steps should be taken while booted in “normal” mode. If the system is now running in safe mode and is bootable in normal mode, reboot as usual.
Below are instructions to enter UNIX shell commands. They do nothing but produce human-readable output. However, you need to think carefully before running any program at the behest of a stranger on a public message board. If you question the safety of the procedure suggested here — which you should — search this site for other discussions in which it’s been followed without any report of ill effects. If you can't satisfy yourself that these instructions are safe, don't follow them.
The commands will line-wrap or scroll in your browser, but each one is really just a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. Step 1 should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click anywhere in the line of text below on this page to select it:
PB=/usr/libexec/PlistBuddy; PR () { [[ "$o" ]] && printf '\n%s:\n%s\n' "$1" "$o"; }; PF () { o=$($PB -c Print "$2" | awk -F'= ' \/$3'/{print $2}'); PR "$1"; }; PN () { [[ $o -eq 0 ]] || printf "\n%s: %s\n" "$1" $o; };{ system_profiler SPSoftwareDataType | sed '8!d;s/^ *//'; o=$(system_profiler SPDiagnosticsDataType | sed '5,6!d'); fgrep -q P <<< "$o" && o=; PR "POST"; o=$(( $(vm_stat | awk '/Pageo/{sub("\\.",""); print $2}')/256 )); [[ $o -gt 1024 ]] && printf "\nPageouts: %s MiB\n" $o; o=$(kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1); PR "Loaded extrinsic kernel extensions"; o=$(launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'); PR "Loaded extrinsic user agents"; o=$(launchctl getenv DYLD_INSERT_LIBRARIES); PR "Inserted libraries"; o=$(crontab -l); PR "User cron tasks"; o=$(cat /e*/lau*); PR "Global launchd configuration"; o=$(cat ~/.lau*); PR "Per-user launchd configuration"; PF "Global login items" /L*/P*/loginw* Path; PF "Per-user login items" L*/P*/*loginit* Name; PF "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed 's/\..*$//;s/-[1-9]$//'; o=$(find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l); PN "Restricted user files"; cd; o=$(find -L /S*/L*/E* {,/}L*/{A*d,Compon,Ex,In,Keyb,Mail/Bu,P*P,Qu,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB -c 'Print :CFBundleIdentifier' "$d/Info.plist"); ID=${ID:-No bundle ID}; egrep -qv "^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|JMicron|microsoft\.MDI|print|SoftRAID" <<< $ID && printf '%s\n\t(%s)\n' "${d%/Contents}" "$ID"; done); PR "Extrinsic loadable bundles"; o=$(find /u*/{,*/}lib -type f -exec sh -c 'file -b "$1" | grep -qw shared && ! codesign -v "$1"' {} {} \; -print); PR "Unsigned shared libraries"; o=$(system_profiler SPFontsDataType | egrep "Valid: N|Duplicate: Y" | wc -l); PN "Font problems"; for d in {,/}L*/{La,Priv,Sta}*; do o=$(ls -A "$d"); PR "$d"; done; } 2> /dev/null | pbcopy; echo $'\nStep 1 done'
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
The command may take up to a few minutes to run, depending on how many files you have and the speed of the computer. Wait for the line "Step 1 done" to appear below what you entered. The output of the command will be automatically copied to the Clipboard. Paste into a reply to this message. No typing is involved in this step.
Step 2
Remember that you must be logged in as an administrator for this step. Do as in Step 1 with this line:
PR () { [[ "$o" ]] && printf '\n%s:\n%s\n' "$1" "$o"; }; { o=$(sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'); PR "Loaded extrinsic daemons"; o=$(sudo defaults read com.apple.loginwindow LoginHook); PR "Login hook"; o=$(sudo crontab -l); PR "Root cron tasks"; o=$(syslog -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|find tok|n Cause: -|NVDA\(|pagin|timed? ?o' | tail -n25 | awk '/:/{$4=""; print}'); PR "Log check"; } 2>&- | pbcopy; echo $'\nStep 2 done'
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: Step 2 might not produce any output, in which case the Clipboard will be empty.
You can then quit Terminal.
To prevent confusion, I'll repeat: When you type your password in the Terminal window, you won't see what you're typing.
Note: If you don’t have a login password, set one before taking Step 2. If that’s not possible, skip the step.
Important: If any personal information, such as your name or email address, appears in the output of these commands, anonymize it before posting. Usually that won't be necessary.
Remember, Steps 1 and 2 are all copy-and-paste — type only your password. Also remember to post the output.

Mac HDMI to TV suddenly stops working

10.9.4 mavericks macbook pro retina to TV via HDMI
using an HDMI cable to watch movies on my laptop macbook pro retina.
was working this morning, and watched a movie. then I go to work, and come back and now the exact setup is no longer working.
it does not show any display in the preferences menus, and the TV is just blue without any input.
cable is secure, nothing has changed. nothing.
edit: actually I did pull the HDMI cable out while the two were connected this morning.
tried restarting, reconnecting, nothing
... very frustrating, no idea why computers suddenly stop working for no reason whatsoever. maybe someone hacked my computer this afternoon while I was gone? it's just a random failure.
Any help?

Hello JupiterSpaceport
If you are having issues with connecting to your TV, then check out the article below to look at resetting the NVRAM as well as starting up in Safe Mode to see if anything changes.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
Regards,
-Norm G.

IChat suddenly stopped working

I'm on an iMac 2.8ghz Intel Duo running OS 10.4.10 connecting via Airport
After 2 years (on my iBook and then my new iMac) the iChat suddenly stopped working properly 2 days ago. It allows me to see the people in my buddy list but when I ring them for a video chat, they can't see my ringing to accept, and when they ring me, I can't see their invitation. Sometimes I can text them, but it's only worked a couple of times and then not for very long.
I thought perhaps there was something wrong with the program on my iMac, but it does the same thing on my laptop.
I called my ISP thinking it may be the modem. We reset the modem and made sure the firewall level was set to OFF, but still no difference.
I tried some of the suggestions I read here in the forum such as changing the Quicktime speed and making sure the bandwith limit was set to None, even downloaded the newest version of Flip4mac.
I'm totally baffled. I can log on, see my buddies and they see me, but we can no longer chat or IM.
Thanks for any input.

ThermoMan ?
5:07 PM Sunday; November 11, 2007

Drive suddenly stopped working

Hi there, can anyone help/advice on this issue. My Lacie external firewire drive suddenly stopped working, the green light on the power pack had died so i replaced the powerpack thinking this was the problem. Still nothing. Te HD does not show up on the desktop or disk utility. The drive does not seem to power up audibly like before, although the blue light comes on. I have tried it on several other newer more powerful macs in the office and still no joy. Ideas? thanks

hi there, thanks for getting back in touch. Yes I guess it could have just died The power brick is rated the same yes, same input power and output, also tested on another brick which belongs to another drive exactly the same. I dont think there is any warranty, it is about 5years old. Not tried the USB, I will give it a try though. Not sure what the drive configuation is inside the case, but may try and remove them and put them in another case, see if I can get any data off. Thanks

My TFT display suddenly stopped working HELP! G4 MDD DP1.25

Hi all...could use some pointers here. My formac 17" TFT display has suddenly stopped working on my MDD G4 DP1.25 - I use the standard graphics card. Turned the mac on today, and the display just wont turn on, though the silver light on the display flashes (as in standby) which means it's getting power. I also have a CRT display attached to the same card, and it's working as normal which I presume means that the graphics card is not dead. I tried booting from a different startup volume, same result. Any ideas please?? thanks!

no it doesn't support multiple inputs, it just has an on/off switch and is connected to the radeon 9000 pro graphics card (as shipped with the G4) via the ADC connector. Like I said, the VGA monitor that's hooked up to the same card works ok. And....weirder still, the Formac monitor has USB ports on the back, and although the monitor will no longer work (just the pulsing light on the front suggesting it's in stanbdy mode) the USB devices will still work when connected to the monitor - so this means either the card is half working or the monitor is half working!!! But I need to know which before I spend any $$$. Anyone got any ideas please? thanks!

Touch Screen Suddenly stopped working

Good Afternoon, The touch screen on my HP Envy Touchsmart Notebook PC suddenly stopped working. I do not have the Tablet PC setting option available either now. All of my HID devices show as working properly. I have had Windows 8.1 for some time when this occurred, so it is not due to a recent upgrade. Additionally I am up to date with all of my installs. Please advise as this was one of the primary reasons for purchasing this laptop.Thank you

Hi ,
Thank you for visiting the HP Support Forums and Welcome. It is a great site for information and questions. I have looked into your issue about your HP TouchSmart 17 Notebook with issues of the TouchScreen now working correctly. Here is a link to troubleshoot the Touchscreen. The touchscreen shouldn't need recalibration, but if you or another user has recalibrated it, it may affect the performance of the touchscreen.Here's how to check or restore the factory default calibration using a keyboard or mouse:Press the Windows logo key Type Control Panel, then use the arrow keys to highlight Control Panel, and press Enter.
In Control Panel, use the arrow keys to highlight Hardware and Sound and press Enter.
Under Tablet PC Settings use the arrow keys to highlight Calibrate the screen for pen or touch input, and press Enter.
Use the Tab key to select the Reset button, and press Enter.
If the Reset button is grayed out, your Notebook touch calibration is still at factory settings and nothing further required. Please let me know how this goes. Thanks.

Bluetooth on imac suddenly stopped working

To start, thank you for reading this question with the intent to help. My imac LionOSX 10.7.5 . Does anyone have experience or knowledge about how the bluetooth to a computer can suddenly stop working. It happened at the same time that the computer start up slowed way down (Just took 4 minutes...i timed it so I could know for sure). It used to start up in about 30 seconds or less. (The computer itself seems to work as fast as normal once the start process has finished.
At first, I thought there was something wrong with my keyboard and mouse, but couldn't even log in to access the system preferences, as both were not working. So I grabbed an old keyboard and mouse from my Windows desktop, plugged them in and was able to log in. That is when I noticed that the bluetooth icon in the menu at the top right of the screen showed a line through the bluetooth icon and when I click on it, it says "bluetooth unavailable. When I click on the "About this Mac"/more info and look under bluetooth, it says "no information found". Also, the mouse I plugged in stopped working the next day until i plugged it into a different USB port.
My fear is that I accidentally downloaded some kind of malware that is eating up different functionalities on my computer. I did use a web-service to download a youtube video on neck exercises (how stupid of me...could have simply bookmarked it and pulled it up just as easily)
If you can help, I would be oh, so grateful. I know my way around computers in the most basic sense, but don't understand much about the how's, why's, how-to's of computer technology.
Thanks. Your friend, Patti P

Sorry I haven't gotten back with those of you sooner about your suggestions and how they have been working. Tried one day, but the site was down due to maintenance.
I have been trying all the wonderful suggestions people have given, but so far with no luck. It is absolutely clear that the problem is with the internal bluetooth and not with the keyboard or mouse. I bought an external bluetooth usb adaptor, and now my bluetooth devices are usable again, but the internal bluetooth is still unavailable. Thanks for letting me know that the long wait at startup was more than likely due to the system searching for the bluetooth, very comforting.
In one article I read, the person recommended trashing the plist file, com.apple.bluetooth.plist, but I couldn't find a file like this in the library. However, I did find a file named 'com.apple.Bluetooth.Audio.plist' which was modified on June 12, which is the same time the bluetooth stopped working. I don't know what to do with this file, since I really know nothing about how computers work, code, etc., etc. I just really enjoy the finished product, so to speak. But here is what I found when I opened the plist file.
Here is the first entry:
Root: previous input UID Dictionary: string Value: AppleHDAEngingInput:18,0,1,0:1
When I clicked on and opted to copy, this is what pasted when I pasted it: <?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<string>AppleHDAEngineInput:1B,0,1,0:1</string>
</plist>
There is a 2nd entry:
Key/Root: previous output UID Type/Dictionary: string Value: AppleHDAEngineOutput: 18,0,1,2:0
When I copied and pasted this string (or whatever it is called…it's all greek (or perhaps I should say geek) to me, here's what pasted:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<string>AppleHDAEngineOutput:1B,0,1,2:0</string>
</plist>
I also found two files that were logs of events that occurred on the 12th and 13th. I have copied and pasted this info and put it into two text docs, which if I can figure out how, I will attach in case someone is able to look at code and figure out what it means. That is way beyond me (and I envy those who can read this foreign language)
In addition, there is a folder named 'com.apple.BluetoothFileExchange.savedState' which was created on June 12th also. It has 2 documents, one named 'data.data' and another named 'windows.plist' I took a screenshot of the plist file which i hope I can include somehow in this post.
There is a 2nd folder created June 23 named com.apple.BluetoothSetupAssistant.savedState that has a data.data file and another windows.plist
These are the only files/folders that came up when searching the library under the key word bluetooth.
Thanks to everyone who was so willing to help. While I wasn't able to fix the problem, I learned lots of good stuff, like how to find my library, etc. so just know your efforts to help were not in vain.
Your (grateful) friend, Patti P

Exchange email suddenly stops working - password incorrect message

For the couple of months that I've had my iPhone, I have had email/contacts/calendar working fine through syncing with an Exchange server. Now it's suddenly stopped working, coming up with a 'password' incorrect message no matter how many times I input the correct password. I have tried deleting and reinstalling the email account, but the same problem arises. The username and server details are all exactly the same as those with which I initially set up the account.
One thing I have noticed is that when going back into the Account Info page on the iPhone, the password entry indicates 8 characters even though my exchange password has 10 characters, which I'm fully inputting each time.
I know that many people have experienced problems getting the Exchange up and running; I'm confused, though, that having had it working fine it should suddenly 'drop' the password for no apparent reason. Any advice would be appreciated!

This problem seems to have resolved itself - the fault was with the Exchange Server, apparently.

Photoshop CS4 64bit suddenly stop working

Having problems with Photoshop CS4 64bit version stop running for me giving me this error message with these details:
Problem signature:
Problem Event Name:    APPCRASH
Application Name:    Photoshop.exe
Application Version:    11.0.1.0
Application Timestamp:    499bfd16
Fault Module Name:    StackHash_0b5f
Fault Module Version:    6.1.7600.16385
Fault Module Timestamp:    4a5be02b
Exception Code:    c0000374
Exception Offset:    00000000000c6cd2
OS Version:    6.1.7600.2.0.0.256.1
Locale ID:    4105
Additional Information 1:    0b5f
Additional Information 2:    0b5f2ed00a0371f4956b3b2a23be79e0
Additional Information 3:    a274
Additional Information 4:    a2747fd43e73092b139f32555a88633d
It seems when i do something simple as typing text, it'll stop working and give me a "Adobe Photoshop suddenly stop working". My CS4 32bit version seems to working fine with whatever i'm working on. I'm running a fresh install of Windows 7 64bit Ultimate on a new computer Intel quad core with 4gig of ram if that helps. Sorry if this have been asked before but i couldn't find anything on these forums. Thanks in advance.

i deleted the prefs file and now i can open photoshop. but it seems as if it crashes if i open ANY file with ANY text, no matter what the font is.

My usb that i have been using on my computer for a while suddenly stopped working, but is still glowing and letting me know that it is connected, but not showing up in disk utility

my usb that i have been using on my computer for a while suddenly stopped working, but is still glowing and letting me know that it is connected, but not showing up in disk utility

Either the physical drive or the enclosure electronics has failed. The light you are seeing is powered by the USB connection, the power, electricity, all USB ports put out. That doesn't mean the actual physical hard drive or the USB to SATA bus electronics are working properly. If it doesn't show in Disk Utility then it is DEAD.
Most of the time it is the enclosures electronics that fail. Removing the physical drive from the enclosure and put it in another enclosure or using a SATA to USB adapter, one that has it's own AC power supply, might allow you to get the files off the drive.

Satellite L300 suddenly stopped working - new motherboard needed

My Sat L300 suddenly stopped working the other day.
It kept freezing to start with, then nothing at all. So, I kill-disked the HDD and tried to re-install Windows (XP).
During the install it threw up a message that some internal components had been incorrectly installed and needed to be reinstalled.
I was told to remove the memory cards and re-seat them.
That did not work. I thought that perhaps the HDD was damaged, so I fitted a new one, and started to reinstall Windows.
Once again, same message. One of my colleagues at work suggested that the Motherboard was probably U/S.
So I have been trawling the .net to find a replacement. Laptop out of warranty! I am told that some other serial numbered motherboards will work with this laptop. Don't really want to get a motherboard only to find its never going to work! My unit has an SPS number of: V000138330.
I am being offered one with an SPS of: V000138390.
Any ideas? Will this one work?
And if it does, will it give me the functionality that I used to enjoy?!
Sorry for the long sob story.
Any advice gratefully accepted.
ANDY-N

Hello Andy
Sorry but can you tell us more about your notebook? which model do you have exactly (L300-xxx)?
Do you have European model?
Has your notebook valid warranty?
Maybe I have misunderstood something but why you want to exchange mainboard if the warranty is probably still valid?

My charger doesn't want to plug in to the phone,it suddenly stopped working.What should I do?, My charger doesn't want to plug in to the phone,it suddenly stopped working.What should I do?

My charger doesn't want to plug in to the phone,it suddenly stopped working.What should I do?, My charger doesn't want to plug in to the phone,it suddenly stopped working.What should I do? iPhone 5

Clean the lint/debris from the charging port and plug the cable in.

Outlook to iPhone sync failure – Sync suddenly stopped working for calendar events but continued for contacts and notes.   Finally Fixed!!! SUPPORT TEAM – PLEASE SEE THIS – Complete explanation of cause and correction steps.

The issue: Outlook to iPhone sync failure – Sync suddenly stopped working for calendar events but continued for contacts and notes.   Finally Fixed!!!
SUPPORT TEAM – PLEASE SEE THIS – Complete explanation of cause and correction steps.
The cause: It is now clear what caused this problem. For years I had several “all-day” events in my Outlook calendar (birthdays, anniversaries, etc.). In May 2012 I decided to make some of them one hour events so I could add alerts to remind me of the event. I did this by dragging them in Outlook to the time I wanted and expanding them to the time slot desired and then adding the alarm.
The symptom: Syncing stopped working for the calendar but continued working for contacts and notes. I didn’t realize sync was failing until months later when I missed two very important phone calls, so when I noticed it the cause was not obvious.
The failed attempts: I’m head of a software firm and my calendar sync is a crucial to my business life so I took this on with a vengeance. From a quick look at events in Outlook and the iPhone I could see that the problem started in May 2012. Events before May were in both Outlook and the iPhone but events after May were only one or the other. Unfortunately I had changed several other things at the same time relating to other events so again the cause was not obvious. MANY calls with AppleCare proved them incompetent so my internal IT guys assisted trying many things. We tried a huge number of calendar changes and several versions of iTunes, iPhone OS and Office as well as both iPhone 4 and 5, all without success.
The fix: After 18 months of frustration, MANY hundreds of $ expense and MANY hours of wasted time I saw a blog that had a calendar sync problem and it indicated all day events were related. I changed the display of the Outlook calendar to the list view, added columns so I could see “all day” event check marks as well as times of events, sorted on the “all day” event column to move them to the top, and for all events that were “all day” events AND had a start and end time, I removed recurrence and then added the annual recurrence back…
After I fixed all events that had BOTH “all day” set and had a start/end time, I tried another sync. It synced for the first time in 18 months!
Problem occurred May 2012 – fixed Nov 2013

Hi, to remove dummy '_ModGrp' entries, rather than crashing the 'Suppr' key on your keyboard, you can use this basic VBA macro (launched for instance from Excel).
It will recursively remove all '_ModGrp...' folders
Sub RemoveFolders_Click()
    Dim oOutlook As Outlook.Application
    Set oOutlook = New Outlook.Application
    Set objNameSpace = oOutlook.GetNamespace("MAPI")
    Call CleanFolders(objNameSpace.Folders)
End Sub
Sub CleanFolders(objFolders As Outlook.Folders)
    For i = objFolders.Count To 1 Step -1
        If Left(objFolders(i).Name, 7) = "_ModGrp" Then
            objFolders.Remove( i )
        Else
            If Not objFolders(i).Folders Is Nothing Then
                Call CleanFolders(objFolders(i).Folders)
            End If
        End If
    Next i
End Sub

Audigy SE - mic input suddenly stopped working

Similar Messages

Maybe you are looking for