Audio capture but can't hear it

On my Clip Setting tab, the Audio check box and the Preview (Audio) check box are "checked." Also, the two channel audio bars indicate that there is audio on the tape. However, I do not hear audio in the camera or my MacBook Pro. I used an external mic that plugs into my camera (Canon Elura 65 - mini DV). I can "see" the audio. Please help!

Tully,
You really couldn't have heard the audio +from FCE+ during capture. FCE has never done it. You may have heard the audio from the speaker in your camcorder, but not through FCE.
In your last post, however, you indicated that after capturing the clip you can't hear the audio. Is that the problem?

Similar Messages

Presonus Firebox problem: I can see the audio levels but can't hear. Help!

Searched in the forums to what I think is a basic issue, but couldn't find anyone with an answer...
I have audio routed into my firebox from an external mixer. I can see the audio meter in the "in" sound panel of system preferences moving but I can't hear sound coming out of my soundsticks.
Audio routed out of my computer into external amp/stereo setup is audible, however.
Can anyone help me figure this out so I can move and and start setting Firebox up with Logic? LOL
My hardware specs (I'm running 10.4.11):
Hardware Overview:
Machine Name: Power Mac G4
Machine Model: PowerMac3,5
CPU Type: PowerPC G4 (2.1)
Number Of CPUs: 2
CPU Speed: 800 MHz
L2 Cache (per CPU): 256 KB
L3 Cache (per CPU): 2 MB
Memory: 1.5 GB
Bus Speed: 133 MHz
Boot ROM Version: 4.2.5f1
Serial Number:
Sales Order Number:

Your memory serves you well.
Yes, line outs from the mixer are hooked up to line ins 3&4 on the back of the firebox. What I can't figure out is that the Sound Panel of System Preferences shows a good input level, whereas the meter in Logic shows nothing (rec is enabled and blinking). If I switch cables to the 1&2 instrument ins on the front of the Firebox, I get levels in both Sys Prefs and Logic. I'm thinking, the problem can't be the Firebox, because the computer sees the signal either way. I'm running Logic 6.0 Platinum BTW.
I find Presonus and their manual to be lacking. They take days to write back with curt responses... Either they don't have enough people or the Firebox is not expensive enough for them to devote to customer service... I don't know

HT1386 Syncing works but can't hear audio with headphones.

Syncing works but can't hear audio with headphones. Works without headphones though.

Have you tried other headphones?
What does syncing have to do with the problem?
- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
Try the following to rule out a software problem
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price

I connect my mic with an M-audio mobile pre usb device. When I try to record, I can see that my voice is recording but can't hear it during playback.

I connect my mic with an M-audio mobile pre usb device. When I try to record, I can see that my voice is recording but can't hear it during playback. I tried different input and output settings but it didn't help. Any help will be appreciated.

Hear your microphone or instrument as you play and record (monitoring)
You can hear, or monitor, input from an instrument or microphone in GarageBand while you play and record. When you turn on monitoring for a track, you hear the musical instrument or microphone connected to the track’s input. Monitoring lets you hear yourself play so that you can hear the part you want to record as well as the rest of the project.
You can turn on monitoring for a Real Instrument track or Electric Guitartrack from the track’s header, or in the Track Info pane. Electric Guitar tracks always show their monitoring buttons, and you can show monitoring buttons for Real Instrument tracks using a menu command. You can use monitoring with feedback protection to avoid feedback while you play.
Hide
To turn on monitoring in the track header:
Choose Track > “Show Monitoring for Real Instrument Tracks.”Monitor buttons appear in the headers of Real Instrument tracks. On tracks with monitoring turned on, the button lights yellow.
Click the Monitor button in the header of the track you want to use.
HideTo turn on monitoring in the Track Info pane:
Double-click the header of the Real Instrument or Electric Guitar track you want to turn on monitoring for.The Track Info pane opens.
From the Monitor pop-up menu, choose one of the following:
Choose Off to turn off monitoring. You can hear your instrument only while you record.
Choose On to turn on monitoring and protect against feedback.
Choose On (no feedback protection) to turn on monitoring without feedback protection. If the input level is too high, it may cause feedback (especially if you are using a microphone and listening to your project through your computer speakers).
For an Electric Guitar track, you can view the Monitor pop-up menu by clicking Edit, and then clicking the back side of the amp. The Monitor pop-up menu appears with the input controls below the stage.
You should usually turn off monitoring when you are not playing or singing. When monitoring is turned on, your computer can pick up output from your speakers or monitors, causing unwanted feedback. Using headphones rather than speakers to listen to your projects can help eliminate feedback.
If you select your computer’s built-in microphone as the audio input, in the Audio/MIDI pane of GarageBand preferences, monitoring is turned off for all Electric Guitar tracks to avoid unwanted noise.
SEE ALSO
If you don’t hear sound from a Real Instrument
Was this page helpful?Send feedback.
© 2010 Apple Inc. All rights reserved.

I plug in my earphones but can't hear anything

I plug in my earphones to my ipad but can't hear the music out of them what is my problem

i have to appoligize up front, this isn't an answer to your situation. but i had the same problem, i couldn't hear audio on the "left" channel.... i complained to my wife about this and she looked at me with that "you're an idiot" look, and said "dear, don't you remember your deaf in that ear?"....

Just bought a new macbook air. speakers show that they work but can't hear Skype or youtube. Can you help?

Hi , just bought a new macbook air. speakers show that they work but can't hear Skype or youtube. Can you help?

Have you checked that they are selected in System Preferences>Sound>Output tab?
If that doesn't help, and although I've never had to use it myself, I've read on here occasionally that launching Audio MIDI Setup in the Utilities folder and messing with the settings in there can sometimes sort out audio problems.

I have a iPad mini an my friend in pa has the iPod 5 and when we try to face time or audio call we can't hear each other what should I do ?

I have a iPad mini an my friend in pa has the iPod 5 and when we try to face time or audio call we can't hear each other what should I do ?

Make sure both parties are running IOS 7.1.1
http://support.apple.com/kb/TS5419

Subscribed to iTunes Match - ok on iphone, but can't hear tunes on Mac Book Pro

Subscribed to iTunes Match - ok on iphone, but can't hear tunes on Mac Book Pro (?)

Hi,
Why can't you hear your music on your mac book? Your music needs to be in your iTunes library on your computer when you subscribe to iTunes Match.
jim

My iphone 5 ATT, i can hear the recording, but can not hear anything from neither ear speaker or loud speaker when i call? what is the problem? what can i do, it is out of warranty.

My iphone 5 ATT, i can hear the recording, but can not hear anything from neither ear speaker or loud speaker when i call? what is the problem? what can i do, it is out of warranty.

1357b wrote:
My iphone 5 ATT, i can hear the recording
What recording?
but can not hear anything from neither ear speaker or loud speaker when i call?
You just wrote you could hear the recording...
You can take it into an Apple store and have it checked out.

Cannot import audio CD, but can play! error: required disk cannot be found

cannot import audio CD, but can play! When I try to import it appears an error: required disk cannot be found!
Does someone knows a solution?

There is no such thing as a "parser plug-in".
That's not entirely accurate. In CS4 we use "EPS Parser.8BY" to assist in parsing of illustrator files. This plugin is normally located at:
"C:\Program Files (x86)\Adobe\Adobe After Effects CS4\Support Files\Plug-ins\Format\EPS Parser.8BY"
Is this missing for some reason?
--chris

HT3775 I have received a .m4a audio file but can't open it on my MAC or ipad . My get info suggests its MPEG-4 audo file .

have received a .m4a audio file but can't open it on my MAC or ipad . My get info suggests its MPEG-4 audo file .
<E-mail Edited by Host>

Try VLC media player it seems to play almost anything.
http://www.videolan.org/vlc/

My ph. display is gone but can still hear it ringing. what do I do?

my ph. display is gone but can still hear it ringing. what do I do?

Make an appointment at the Genius Bar at your local Apple Store or at your local authorized repair center.
Best of luck.

Sent an video via text but can only hear audio. why can't see the video?

i was sent a video through text but cannot see it. i can only hear the audio. why?

maybe it was sent in a format that cannot be read by the iPhone.

My speaker on my iPhone 4s stopped working. I can't hear my phone ringing, music, apps or use the speaker when having a call. I can still make and take calls when I see them calling but can't hear the phone ring.

This afternoon my speaker on my phone stopped working. I can not hear it ringing when someone call, but if I see someone calling and I answer the call they can hear me and I can hear them fine. I also can't not put the caller on speaker at all , I also can't hear my music or gaming apps. When I turn my phone on or off it does not make a sound as well. I have turned the phone off and turned it off by pressing the top button and home button at the same time and that did not work. I checked the volume and the mute button and the volume is up all the way. I don't know what else to do can you please help me?

I have had this happen to me on 3GS, 4 and 4s. Usually the solution is one of the following:
1- If your volume indicator says headphones even though they are not plugged in, then:
Stick your headphones into the headphone jack and then remove quickly.
2. If that does not work Power your phone off. Then when restarting Reset the phone by pressing the home button and the power button at the same time until the apple logo appears.
3. Make sure you have not chosen to send audio to an Airplay device such as Apple Tv.
Hope one of these works for you

Can see but can't hear

i'm having a problem with the sound when i try to use ichat. i have successfully talked with people over ichat but i usually can't hear and see them at the same time. i can connect with them and hear them over the audio successfully. i also can't connect with people, they have to invite me to chat. it's frustrating because i have successfully communicated over ichat, but i can't initiate it or get it to work on my own.

Hi,
Umm Comcast.
They claim that they offer a VoIP telephone service that DOES NOT use SIP and therefore should not interfere with iChat.
The Netgear may need some tweakes.
Here is a page that allows you to find out the default Access info (As well as Port Forwarding Instructions).
Check the UPnP menu item to see that it is active (it should be by default)
In the WAN page check the item that Disables DOS or SPI (you will have one or the other). They block what they think are attacks based on how much data is coming to you.
IF the modem is in Bridge Mode and passing the public IP to the Linksys then you may also have to disable WAN/Anonymous Ping Blocking.
12:06 PM Thursday; September 13, 2007

Audio capture but can't hear it

Similar Messages

Maybe you are looking for