Audio Content/Jam Packs

i purchased Logic Pro 8 but i have recently moved house and managed to lose the discs except the installating disc
luckily, i had the serial written on the disc case, but when i install it asks me for the Audio Content and Jam Pack discs which i dont have
is there a way to download/get sent these discs?
thanks

no its not stolen lol
i was contacted today by the removal company that that moved my stuff, and there was another box found containing the original logic box along with my camera - i wondered where that was lol
thanks alot for the help anyway!
Message was edited by: MITCHFIELDER

Similar Messages

Need 2 install Logic Studio 9 Audio content & Jam Packs?

Have Logic Studio 9: didn't have enough space to download extras originally (i.e., Audio Content & Jam Packs). Have now upgraded to 500 Gb HD for 2.4 Intel Core 2 Duo MacBook Pro and have tried to install Logic Studio again (The logic Pro; Logic Node; MainStage; and WaveBurner seem to have installed OK - at least they show up in Applications folder) When it comes to installing Studio Content the Studio Content disk install process gets hung up at the end of the downloading. A message window pops up saying: The installation failed. The installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance. The Logic Studio software is registered to me and has a Support ID: I6941D2H41H. It is frustratingly difficult to find anywhere that I can contact tech support related to this Logic Studio issue. I would simply like to be able to get the included Audio Content and the Jam Packs from the Logic Studio Suite installed on my MacBook Pro. I would appreciate some response and help to be able to get the application data so that I can fully install the whole Apple Logic Studio program ASAP. A further suggestion is that a means of contacting support for such related issues be instituted. Anyone know how to get the corrupted Audio Content & Jam Packs for downloading?

Firstly you are Not addressing Apple here... This is a User to User Forum...
That said... Give Apple Care a Call... Tell them you are a Logic Pro User and you should be transferred to a Logic Expert...
Explain your situation to them...
Make sure you have your Serial Number and Date of Purchase handy...

Installing audio and jam pack content

I'm running logic pro 9 on a mackbook pro and want to save sessions and store audio and jam pack content on a 7200rpm firewire 800 external hard drive. I installed the audio content on the external drive successfully but the installation software won't allow me to install the jam pack content on the external drive; it wants me to install it on the system drive which I had hoped to avoid.
Is there a way to perform the installation on the external drive?
I also installed logic on a mac pro, and on this install, the software won't allow me to install audio content or jam pack on a drive different than the system drive.
Any ideas on how to resolve these two issues?

hi joearturo
I've got the JPs on an ext hdd. It's been a while but as I recall I installed onto the system drive, then dragged the jam pack folder, say orchestra, into my plugins samples folder on the ext drive and deleted the folder on the sys drive.
When logic opened next it gave a message saying something like "can't find folder" choose location. A drop down box appeared with all the drives and I selected the ext and the appropriate folder. Everything was okay from then on.
Hope this helps, although its somewhat convoluted.
Scorpi.

Moving Audio and Jam Pack Content to second hard drive

I recently installed Logic Studio and all the content onto my startup hard drive (250 GB). I have a second internal hard drive (80 GB) that is wiped clean.
Can I safely move all the Audio and Jam Pack Content (contained originally on the 6 DVDs) from the startup hard drive to the second hard drive? Or do I have to go through the whole installation process again? If so, where is all the content located on my startup drive?
Thanks for help and advice on this newbie question.

Thanks. I found this which was helpful
http://discussions.apple.com/thread.jspa?messageID=5340760
I decided to move them to the external hard drive and not use an alias. I haven't even opened Logic yet so the Logic library should be ok.

Jam pack & audio content

I run a mac pro and logic in my studio, both up to date. I tossed my office PC into the trash. I'm now officially done with PC'S. Went with the IMAC.
Processor Name: Intel Core 2 Duo
Processor Speed: 3.06 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 3 MB
Memory: 4 GB
Bus Speed: 1.07 GHz
Boot ROM Version: IM101.00CC.B00
SMC Version (system): 1.53f13
My question is. Can I load The Jam pack & audio content from my logic 9 update discs into the new IMAC to use in garage band just to fiddle around. While I have nothing to do in my office!! This would be great. Thanks Bill

cowbell bill wrote:
My question is. Can I load The Jam pack & audio content from my logic 9 update discs into the new IMAC to use in garage band just to fiddle around.
Personally I did not tried yet with Logic contents disks but you can try using the shareware Pacifist app, which must do what you want.
!http://img59.imageshack.us/img59/4967/aglogo45.gif!

Error when installing jam pack/audio content on new imac

Keep trying to install the audio/jam pack cd´s that came with my Logic Studio bundle on my new Imac/Leopard. When i´m almost done installing, it asks for the "logic" cd and then after a while i´m getting an error "installation failed"- disk corrupted" or something? I cannot as it works now find (almost) any of the audio files that i´m using (brass/horn sounds etc..). Anyone who´s had the same experience?
Thanks!

Also seeing this problem. I'm updating to latest logic and 10.5.3 right now to see if it mitigates it.

Where 2 download the 19gb of content for MainStage 3 that was jam packs?

hello, where do i download the 19gb of content for mainstage 3 that was in the jam packs?
Just got mainstage 3 and need the content.
hope nothing has changed in this regard.

Open Mainstage 3 and select Mainstage 3 in the menu at the top of the screen. Select downlaod additional caontent. Jam Packs are in the Legacy folder. Select the box for Legacy and Compatibility and install. That should do it.

Jam pack content error, any ideas?

Just did a re-install of Logic Studio, and all of the supplied content. When I make a new software instrument track and select a jam pack preset sound from the library browser, it loads the sound just fine, but when I try to select another sound it says "File not found / result code =-43." If I create a new software instrument track, and repeat the process, the same error code comes up. Any idea why it would let me load just a single sound, then give me the error message when I try to select another?

I don't usually use Jam Packs so today was the first time I've checked to see if they are there. Nope. I only have Jam Pack 1 showing up in my library. I checked GarageBand and it sees all 5, so something is wrong with Logic Studio not seeing them.
I did a full upgrade from Logic 7 and have never had Jam Packs before (so they are not left over from a previous install). When I did the upgrade, all options were available and I just did a full install, not a custom one. It said it completed successfully.
Any ideas on how I can get Logic Studio to see the Jam Packs?

I installed logic studio 9 but it says error when i install the jam pack content

The apple site says that logic 9 comes with six jam packs, but I only see 2 in the tab entitled "library." These are Jam Pack Voices and Jam Pack World Music and when I only put any of the jam pack Content Cd's (that come with logic studio) and click on the cd all it has on it is a text edit file. Is it a corrupted cd? I have seen other posts about it but no definite solution. any possible ideas? Thank You!

Hi
Something is not quite right here:
I have the original Studio 2 disks here, and the installer runs fine under OSX.8.3. It will install Logic Pro 9.0.0, which can then be updated by downloading the 9.1.7 or 9.1.8 updater from Apple Downloads.
On your system, the installer refuses to run, or does the install proceed, but you are unable to update Logic so that it will work on Mountain Lion?
CCT

Contents in Jam Pack

I've just been working with somebody in their studio, they showed me the number of items they have under World instruments, in excess of at least 2000 plus. I was amazed and told him these was no way I had this amount, under world on my system.
I wanted to find out if anybody else have is amount when they installed there system and why this is not the case for me?
Ta very much!

Seriously? They really make you install everything on the internal and then move it over? Why would this be the case? Doesn't that get a little messy with re-indexing everything. I installed the basic install disc info a while ago, and have been holding off on the jam packs until I get the external, just to avoid a little wear and tear on my internal drive. I guess I might as well install them now? And move them over later?

Jam Packs and "Garageband Instruments" when reinstalling Logic?

What's the proper procedure when it comes to Jam Packs and 3rd party Apple Loops libraries when reinstalling Logic and OS X?
I'm keeping my Apple Loops on a separate drive and know that I can just drag them to the Loop Browser after reinstalling Logic. However, by doing so, I don't think I'll be getting the "Garageband Instruments" that are installed with the Jam Packs and some 3rd party Apple Loops libraries. Is that correct? If so, what's the best way to deal with this? Always installing all Apple Loops from the disks or perhaps saving a folder (which one?) with the Garageband Instruments before re-installing OS X?
When I last installed Logic, and told the installer to install the Jam Packs on an external drive, they were still installed on the system drive! Does anyone know why? Now what's the best way to move the Apple Loops? What I've done in the past is installing them to their default location, and then creating an alias in Home:Library:Audio:Apple Loops folder that points to the new location on the external drive. Is that the way to go or is another way better?
Any input or help would be greatly appreciated.

Jam packs consist of two types of content. Loop content will go to where you choose to install it (an external drive if you wish). Instrument content has to go to the GB library, for a number of reasons, and the GB library will be on your system disk under Application Support/Garageband.
So backup your GB library in addition to your Logic related stuff.
It is possible to move much (but not all) of the heavy Instrument content to an external drive too, but there are gotchas with this.

? why ?32 bit ? Legacy Jam Packs Work in GB v.10.x

Hello,
I am running OSX 10.9.3 on a Mid Summer 2010 iMac , Prior I had installed Jam Pack One (non genre ) in the Version of Garageband (5.1) that was installed on my iMac (and mine came with OSX 10.6.4 + 2 install disks, Operating System and Applications ) I updated from Snow Leopard OSX 10.6.9 to Maverick (Never installing or buying Lion or Mountain Lion ) I downloaded Gargeband Version 10 and its updates as well as the additional content
for $4.99.
I read that MainStage 3 contains (beside its content ) the Apple Jam Packs but in 64 bit mode (and MainStage works
with Garageband V 10.x as well as Logic X . For the cost MainStage 3 appears a very reasonable price
( I do have 4 un opened Jam Packs Remix, Symphony, Rythmn and Voices (all but World Instruments )
I am mainly interested in the Virtual Instruments , more than loops (as well as AU, effects amps, pedals but can use real instruments as well Guitar-effects-amp-mic via Audio Interface Focusrite Scarlett 2i2
But have read + and - comments on MainStage , I added ram (was 4GB now 12GB ) 4GB x 2 2GB x2
and plenty of HD space , dual core 3.06GHz . Just puzzled why the Jam Pack (I added to GB V 5.1 works (Virtual Instruments , under Legacy (and assuming the Jam Pack is 32 bit (When I bought it first was using it with a eMac
1.25GHz 1.0GB ram , I considered adding one jam pack (Remix or Symphony) to GB 5.1 but would rather keep them sealed for potential sale down the road, I took off time recording,playing due to one spine surgery then two knee surgeries Thanks in advance ,
diamond blues

Hangtime
Just a fyi, it WORKED ! No Error Message (other than some read files were not able to open, but installers ran
just right !
I added 4 for 4 Apple Jam Packs Remix-Symphony -Rynthmn and Voices ! All from sealed boxes I had bought
awhile back from a Apple Reseller who annually or sometimes x2 has a online "Garage-Sale" Paid no where
what retail would have back in the day (I did buy Jam Pack 1 non-genre for full price , when using a e-Mac
and it was >$95.00 . These all tested and pull-show up under Legacy as did Jam Pack 1
Thanks for the advice , I was going to d-load and pay for MainStage 3.x but will not now
Take Care Man
Diamnondblues

Where are the Jam Packs located in lp8

hey guys
stooooooopid question, but where are all the Jam Pack material located in LP8? I Installed it all off the discs but cant locate it in logic when im browsing the software instrument area...is it located in the exs?

/Library/Application Support/Garageband/
There is two types of Jam Pack content.
- Loop content (Apple loops, audio or MIDI)
- Instrument content (sampler instrument files, raw samples)

How can I add the audio content cd after logic finished installing ?

There was an eror installing the Audio Content CD 1 and I did not notice. Everything else installed properly, Audio Content CD 2, Jam Pack, but how can I add the Audio Content CD1 after Logic has finished installing?
If you can help me please be very specific as to how to do it so that I can follow the directions properly.
Please help me.
Thanks

Hi
You could re-run the installer, or, once you have updated to Logic 9.1.8 you could use the "Download Additional Content" function in the Logic Pro menu. It will tell you what is installed and what is incomplete.
CCT

Can I get Jam Packs for GarageBand '11 on Snow Leopard?

I have GarageBand '11 (v 6.0.5) on a MacBook 2 with Snow Leopard, and I would like to add Jam Packs. I know I can get them all if I buy MainStage and download them. Unfortunately MainStage is now in version 3.3, which does not run on Snow Leopard. And version 2, which does run on Snow Leopard, is no longer available. (Not supported, I understand. Not available for sale to willing owners of older equipment I don't understand. But I digress.)
I have a Mac Mini which I can upgrade to Mountain Lion, and get MainStage. Can I then move the Jam Packs from the Mini to the MacBook?
Thanks!

When you say you had to "run" MainStage 2 once - what does run mean? Did you have to open it or do anything else to run it?
I only launched it to be able to access the main menu bar and open the download panel.
I still downloaded these individual instruments but they do not appear in my Garageband loops or anywhere else on my iMac.
Have you rebooted the system after installing the additional content?
You should see additional instruments and loops in the system library (Your Macintosh HD > Library). Have you checked the following folders:
/Library/Audio/Apple Loops/Apple/ (for the loops)
and
/Library/Application Support/GarageBand/Instrument Library/
/Library/Application Support/Logic/Sampler Instruments/
Perhaps you need to rebuild the Lopp Index, if you find the loops somewhere and they do not show in GarageBand: Rebuilding the Loop Index in GarageBand
Silly question, but you have checked, if no filters are set in the Inspector, right? The top of the Info Panel should be showing "Show all" and the search filed be empty.

Audio Content/Jam Packs

Similar Messages

Maybe you are looking for