Audio Crackles & Pops in disk burned by iDVD

I videotape using my Sony HDV camera (1080i), and import directly into iMovie06 HD. From what I've read on these forums, that is the best way to keep the full quality HD video. I edit my movie and close iMovie. Then I open iDVD, choose a theme, and drag that movie in. I don't add any other transitions, etc. Then I choose "Best Quality," and burn the DVD. When I play it in my Panasonic Blue Ray DVD player the audio crackles and pops--it's terrible. What happened? What can I do to fix this so that the audio quality is as good as it sounds on the HD videotape or on the Mac.

Hmmm. Crashing isn't good, but no harm to try again with Pro.
iDVD's Preview isn't always accurate, but do you hear anything there?
Burning errors wouldn't typically present themselves as crackles/pops, but high quality discs are recommended (Verbatim DVD-R discs are often suggested; I like Sony as well) as well as breaking down the burning process into two steps:
1) from iDVD, create a virtual DVD by using Save As Disc Image. Test this by mounting the disc image and using Apple's normal DVD Player to play it on your Mac (try just double-clicking the image file).
2) If it plays correctly, Copy the disc image to an actual DVD using Roxio Toast or Apple's Disk Utility.
It's good to have a substantial amount of hard disc space available (10-25 gigs) and I typically quit from other applications so iDVD can have max resources available.
All the audio work in iDVD is behind the scenes and there aren't any special audio controls.
John

Similar Messages

Windows 8.1 MSI GTX 780 Audio Crackle & Pop

Hi Guys,
Pulling my hair out with this one and I really need some help.
My HDMI Audio out to TV has worked great but more often than not I get Audio crackling and popping sounds.
Its more apparent when I launch big picture mode in steam it opens with horrid crackling sounds, if I use my USB headset its fine.
I have done the following so far;
Disabled onboard Audio in the bios - No difference
Enable XMP1 memory profile - Thought it had resolved this at first but then the issue was back within a few days
Enabled high performance in power settings - no difference
reinstalled all drivers - no difference
did a full reinstall of Windows 8.1 and removed other devices and the same issue occurred.
I would also like to add the TV is fine, speakers are ok and I have tried a new HDMI cable and other devices which don't crackle.
Scan computers have offered to RMA the card but I don't think this issue is the card the games, graphics, all function really well and I am hoping to not have to RMA the card I have come here to ask for help because I am now at my wits end trying to fix this.
My motherboard BIOS is also fully up to date
Gigabyte Z97M-DSH3 Bios F5
i5 4460
Ballistix 8GB Ram
Nothing is overclocked

Had the same problem after installing 8.1 a long time ago. Rolled back to 8 still had the same problem. Just ignored it for like a year since it only happened after my PC was on for a while and then I could just log out and back in and it would fix itself for like 8 hours. Down the road I reinstalled windows from scratch after getting a new PSU (mine was getting up there) and it was gone. I think it had something to do with some drivers or something getting messed up while moving to win 8.1. On 8.1 now and have no issues.

Audio crackle/pop with new MacBook Pro under Vista

I just got a brand new MacBook Pro (multi-touch, Penryn cpu) and have used Boot Camp to install Windows Vista on it. Vista installed fine, and then I used the Restore DVDs that came with my MBP to install the drivers. The Device Manager shows that everything is installed.
All is not well, however. Whenever sound is being output, there are random crackles or pops - sometimes there will only be one every 5 minutes or so, sometimes there are 10 of them right in a row. The only clue I can find is that the Problem Reports And Solutions application in Vista says that there is a "Compatibility issue between Intel 82801GBM (ICH7-M) LPC Interface Controller - 27B9 and Windows Vista." There is no solution offered. I don't know if this problem is directly related to the audio problems, but it seems likely.
Has anyone else encountered this? Any way to fix this and stop the audio crackles?

Well after a week and a half of testing and being unsatisfied with choppy audio on my MBP I believe I may have found the answer. The cause lies in the audio API within Vista; there is a specific service (Multimedia Class Scheduler) that adjusts the priority of multimedia applications according to resources available and one of the factors that affects the prioritization is network usage.
I tried pretty much every Broadcom driver available from HP and Dell to no avail; some reduced the frequency of the pops and crackles but none of them removed it completely.
I believe the solution lies within several registry keys that control the Multimedia Class Scheduler service. Open up regedit and modify the following keys:
HKEYLOCALMACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Multimedia\SystemProfile
Set NetworkThrottlingIndex and SystemResponsiveness to 10 each (decimal)
and
HKEYLOCALMACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Multimedia\SystemProfile\Tasks\Audio
Set SchedulingPriority to High.
After changing these 2 keys I couldn't here any audible stutter regardless of whichever driver I used. I am currently using v1.96 for the Realtek and 4.170.77.3 for the Broadcom.

DV6 IDT audio crackle pop click issue

I have pavilion dv6 with the crackle pop sound issue. It almost sounds like it crackles when the bass hits or higher notes. I have tried disabling hp 3d thing, that didnt work.
I updated newest drivers. Just very frustrating.

updated Atheros Wireless LAN Driver
Fixed issue, so far, Will see if problem stays away if so I'll not send it in for repairs.
First time says christmas, i have been able to use my notebook. HP FAIL.
How did the techs not even update my drivers when i sent it in for repair. They did more work than necessary changing out speakers that were perfectly fine.
But ill keep this upadated.

Imovie 11 video has audio dropouts when trying to burn to iDVD or Quicktime

Please help... video is 90 minutes long in DV 4x3 format... had no problems before this, and i cannot figure it out.

The video is fine when viewed in imovie... it's when i export it is when the dropouts happen... need an expert asap!!

Audio out of sync or absent in iDVD burn

I am having trouble with the audio of any disk burned by iDVD. Either the audio is gone totally in certain parts or it is out of sync with the video. Does anyone know if there is a limit to the number of video/audio clips/chapter marks you can place on the sequence bar? I know that you can't exceed the 2 hours. I can't figure it out. Does anyone know if Final Cut Studio is any better for AVCHD? Is this an iMac problem or can I do this any better and especially faster on my new MacBook Pro 17 inch? Thanks!

First thing to check is:
Render everything before the export.
Also make sure the audio is Mixed Down (search this forum for details) before exporting. This is the number 1 culprit for audio gaps.
Al

Multiplexer Error on a 8GB disk burn or Disk image, iDVD

Burning 4.5GB DVDs burns fine.
While trying to burn a 8GB DVD or creating a disk image on iDVD I receive a "Multiplexer Error".
Another time, it burned and with about 3 minutes left the disk popped out of the computer although on the computer it appeared to still be burning. When I put this disk in a DVD player the chapter titles are mixed up with the actual video that plays and the same video is played over various chapters.
I tried changing the burning speed to 2X and tried using an external DVD burner.
Would appreciate any ideas!
Thanks

Sorry that I can not make a shorter answer !
Hi
Multiplexing error is a very complex problem due to many things (long long list following) - one common but not obvious reason is that material on the iDVD menu goes outside the TV-Safe area (or just touching it).
So first - turn on TV-Safe area and move any object well inside of this.
Wide screen stretched - usually (as I think) it is due to making a 4x3 movie in a 16x9 wide-screen project OR the other way around. This forces one to on flat-screen TV (or other) set the presenting view right - My has 4x3, wide-screen, zoom and auto-wide-screen and I have to switch this by my remote for some DVD I've made "wrong" way.
Now my long long list on Multiplex Error
LONG LONG LONG LIST
Multiplexing Error
PART One.
Use of strange video/audio material e.g. .avi, .wmv, .mp3 etc.
I only use.
Video - StreamingDV (miniDV tape via FireWire) and
Audio - .aiff (as on audio-CDs) (else converted to this .aiff 48KHz)
Photo - .jpg (.bmp known problematic)
Chapters !
A. Using strange letters in video project name e.g. +,/; etc. keep to a-z and 0-9 strange letters in project name e.g. +
as described by Donnyboy69. Does the title of your project have any symbols or decimal points in it. If so, that is why you are getting the error. I had a project that had a + sign which caused the same problem. I renamed it without the symbol and low and behold, it worked.
B. Location of Chapters
Can’t be at start or end of movie (Skip first/start one - iDVD sets this by it self. At the End - no need)
Not in a transition (or within 2-3 seconds from it)
Important when from iMovie HD6 or previous - Now also observed when using FCE 4
PART Two.
from Robert Modero.
"Multiplexing Error. Problem during initialization of tracks"
Simply remember to add subtitles to your Quicktime files and menu buttons.
Once I did that, I was back in business.
from Boise Jim
Do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
I always makes a DiskImage first and test this so that it runs OK
I use only - Verbatim DVDs
I use only - DVD-R
I burn at an as slow speed possibly e.g. x1
This gives good DVDs
PART Three.
Multiplex Error
Chuck, Chicago 2/7/2009.
Back again. Here is what I have found to work. I also have and use a LaCie DVD-R/RW DL external drive and a LaCie external hard drive as well. Since yesterday I have tried a few ways to burn a themed iDVD project having four 56 minute movies on it, amounting to 226 minutes onto a DVD DL disc, capacity 240 minutes. Apple tech support really didn't know what to do but gave me a very good tip. I had two options left. Apple tech support's tip was to try disc image. One of the replies on a thread with this subject said not to, but my experience today is good. Put your project onto "Burn to disc image," under "iDVD, file." Yesterday encoding took me 23 1/2 hours. Overnight for iDVD disc image, encoding took 21 1/2 hours (again) while I slept. This morning I tried to copy/burn disc image to a DVD with Roxio Toast 7, and it stopped near the end of the burn with some kind of "error" message. So then I tried Utilities> Disc Utility> Burn icon, and followed it through. Be sure to click the DVD DL drive in the window "Burn disc in.". I had one other problem though. At the end of a 46 minute copy, it started to verify, and at the end of verify it rejected the burn. So I tried again, and when "verify" appeared, I clicked on "Skip." The disc finished burning and is doing fine and well. A long and tortuous process, but at last something works. I made several additional copies using Disc Utility. Best wishes. Chuck, Chicago.
2. Disconnect any other external devices not absolutely needed.
e.g. external USB/USB2 hard disks, other FW hard disks etc.
3 Chapter marks in transitions - minimum 2 sec from
FROM Bev. (Not a 'guy' but I will answer!)
First, I do not think that mixing wide-screen and standard makes a difference in iDVD.
Second, you should use a better brand of DVD disk. Also, many of us have experienced fewer problems on playback with DVD-R disks. Recommended brands here are Verbatim, Maxell and Taiyo Yuden. Memorex and TDK are not consistent and may not give you a correct burn. They apparently have fewer layers in the composition of the disk. I have always used Verbatim DVD-R disks and have not had any burn problems.
Also, choose a slower burn speed, 4x or less.
Third, to determine if the iDVD project will burn properly, create a disk image file (from within iDVD, go File->Save as Disk Image) and test it. Mount the disk image and then open DVD Player (in Applications) and view your project. If it plays correctly, you can then burn the actual DVD disk from the disk image file using Disk Utility.
From. Boise, Idaho
I did everything I've seen suggested, but a friend (who used to be an Apple Genius) suggested that I do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
It worked, and I got a clean burn from iDVD.
Hopefully this can help other people.
by dheb0422
Well, I finally got it, and it was odd enough to post here incase anyone looks this topic up again. Many things were tried, including burning the unedited film, the edited film without titles and chapter markers, abbreviating the chapter markers in case length was the issue (remember the old iMovie used to truncate them when moving to iDVD?). In the process, I noticed that one, and only one, chapter marker was on the same line as the title marker. All the others were on the line above. The only way I seemed able to change that was to clip a few seconds of film. After that last clip, the offending marker took a place on the line above, as were all the others. That run published, compiled completely and burned. That's one for the books.
One user more writes
To add my experience with Multiplex Errors using iDVD (7.0.4), I recently created two iDVD projects
Video from both passed from FCE 4.01 with chapters
One project worked fine in creating disk image file
The other gave Multiplex Errors
I tried suggestions to remove special characters and no chapter marks at beginning, but nothing worked
Note that I've used iDVD for dozens of projects and this is first time I've run into Multiplex Errors
Anyway, for problem project, I tried an experiment where I removed all chapters in FCE and passed to new iDVD project
This time multiplex errors gone
So had something to do with chapters
So now I tried numerous experiments to remove individual chapters and try again creating disk image with new iDVD project
After numerous tries, I was able to narrow problem down to 1 "Bad" chapter mark
That is, when I left the "bad" chapter in my FCE project and passed to iDVD, iDVD gave multiplex error
When I removed "bad" chapter mark (and others in), no multiplex error
As a final experiment, I moved "bad" chapter mark about 5-10 sec's beyond original point and passed to iDVD, the multiplex errors now magically went away and I was able to finally create my disk image.
I have no idea why this worked, but thought I'd mention here in case someone else runs into similar problem.
Rich839
In addition to Bengt's fine advice, burning errors can occur if you have located any of your menu buttons wholly or partly outside of the safe TV viewing area. Go to your main project menu, then click on View/Show TV Safe Area, to check. Drag into the safe viewing area any buttons that are outside the safe viewing area.
Russ One - suggest this
Multiplex Error-There was an error during muxing preparation
One thing that worked for me was to export the video w/o chapter markers as a self contained movie (thereby not loosing the edits & etc). Then make a new FCE project and import that movie into a new sequence and add the chapter markers. I've used "-", "&" and "," with no problem in the chapter names. Removing the markers or exporting without them did solve the problem but renaming them with just numbers 1,2,3....5, did not solve the problem and since this problem seems to happen with with iMovie as well, it would suggest the problem is in the video or audio and in combination with the chapter markers iDVD just can't handle it. The only other possibility is that both iMovie and FCE share the same or similar chapter marker code that some how is corrupting the markers.
Summary - What to try
1. Chapters
Only A to Z and 0 to 9 in chapter title
No Chapter mark at very beginning of movie
No Chapter mark in or within 2 seconds from any transition in movie
2. TV-safe area for buttons (no one outside this)
3. Safe re-boot
4. No other external devices connected - that are not needed
SDMacuser adds to this
On #4 ... No ext. devices. Some think this applies mainly to ext. FW. Not the case. Also applies to ext. USB2 as well (not to mention flash drives too).
Do not leave 3rd party devices / camera / camcorder plugged in unless it is being used with iDvd's One Step process. Certain web cams can trigger this also (especially ones with added features like LED light/s that draw additional power from the FW or USB bus).
5. Minimum of 25Gb free space on Start-up hard disk
6. Make a DiskImage first - reduces where problem originates
7. Trash iDVD pref. file
8. Make a new iDVD project
9. Movies in project with same aspect ratio e.g. 4x3 or 16x9
10. No other programs/applications running during iDVD process. e.g. Internet, screen & energy savers
Max Mccarty
Mar 29, 2013 7:55 PM
I've made literally hundreds of DVD's using iDVD and I occasionally get the dreaded "Multiplex Error". In the past changing the position of chapter markers has worked, but sometimes the only way I can get the DVD to burn is to remove all the chapter markers (not a great solution).
Recently, I've discovered a bug in iDVD that creates the "Muliplex Error" message and it may be the cause of some of my previous problems. Sometimes when you export a movie to iDVD with chapters, it will create chapter menus with incredibly long playing times. My most recent "Multiplex Error" project had two chapter menus. I have a 38 second audio clip that I use for my DVD menus and the first menu showed the correct time of 38 seconds (select View>Show Inspector). The second menu with the same audio clip showed 13 minutes and 42 seconds! When I went to the Project Info window (select Project>Project Info) it now showed the total size of my DVD as 4.8 GB, too big for iDVD to encode. So, I manually adjusted the time of the second menu to 38 seconds. This time without changing anything else, iDVD burned the disk perfectly.
The interesting thing is that when I began the burn, the project info showed under 4GB for my disk. So, from now on I'll check the playing times of each menu before I burn.
Yours Bengt W

Unable to burn AUDIO to DVD or Disk image, video is fine

As many other posts have stated; I am unable to burn the Audio portion of an iDVD nor does "save as disk image" transfer the audio of my iDVD. Transferred an iMovie, (an iPhoto set of photos with iTunes audio imported into iMovie) to iDVD. Audio plays on iMovie, audio plays on iDVD preview. Tried removing recommended ~com.apple.iXXX.plist, no help. Tried different encoding methods: i.e. Best/High/Professional. Tried saving to different sizes HD/Large/etc. Tried Share Media in iTunes, Media Browser, etc. Checked Main Audio, volume slider bar in iDVD. Tried importing audio into iDVD rather than transferring from iMovie. It doesn't seem to matter how I build the iDVD it works, until I go to Save As Disk Image or Burn DVD. Video works great (better in Large than HD) Audio doesn't transfer.
21 total minutes, 1.15GB of final iDVD using a default theme.

Hi
(an iPhoto set of photos with iTunes audio imported into iMovie) to iDVD
Yes this is the problem - in iTunes there is a copy-protection that moves over
Result
• Plays well in iMovie
• Plays well in iDVD preview
• Silent on DVD
Only way around this is to in iTunes collect needed audio into a play-list
Burn this out as an Audio-CD and .aiff (NOT .mp3)
Use the audio on this CD in Your iMovie project.
Yours Bengt W

Foreign audio after burning in iDVD

I am running iMovie with Tiger on eMacs. I have 13 computers in a classroom. Sometimes when I burn in iDVD, the burn is successful, but there is only identical foreign audio over the whole disk. I have four uses set up on each eMac. the foreign audio if from totally different user than the one I am logged into. This plays on both the theme upon loading the disk, and on every movie. Movies play fine in iMovie and when testing in preview in iDVD. Usually I trash preferences and this clears it up. Now, two of my computers are not fixed with this method. I got one to work after trashing and repairing preferences, rebooting, then rebuilding the iDVD project with a totally new project. Any ideas?
Thanks

Sounds like this old gem...
iDVD: Wrong music after switching users
http://docs.info.apple.com/article.html?artnum=301642
Patrick

After creating a new image of my project burned from iDVD I get no audio when I import it back into iMovie HD 6.0.3

I need to edit my project after I have already burned the project. I deleted the files after being burned to save space on my hard drive. So I made a new image of the burned project with disk utility. I opened up iMovie HD 6.0.3 and imported the movie but I get no audio and the audio folder for new disk image doesn't have anything in the folder. Any help is greatly appreciated!!!

You need to convert the VOB files in the TS-Folder of the DVD back to DV which iMovie is designed to handle. For that you need mpegStreamclip:
http://www.apple.com/downloads/macosx/video/mpegstreamclip.html
which is free, but you must also have the Apple mpeg2 plugin :
http://www.apple.com/quicktime/mpeg2/
which is a mere $20.
Another possibility is to use DVDxDV:
http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
which costs $25.
For the benefit of others who may read this thread:
Obviously the foregoing only applies to DVDs you have made yourself, or other home-made DVDs that have been given to you. It will NOT work on copy-protected commercial DVDs, which in any case would be illegal.

Audio disappears when burning in iDVD 6 from QT movie (from FCP)

Before burning, checked all the chapters and each plays with audio. When the disc burns it does encode the audio during the burning process but the only audio that is present when the burn if completed is the audio on the 1st menu. I only inserted video on menus two and three (using "Full Frame" menu) as I only want video; no audio on those two menus . I had to force quit twice and then ran Repair Permissions. Should have I trashed iDVD prefs and if so, is there only one to trash?
thanks for any help . . .this forum is invaluable.

I had to force quit twice and then ran Repair Permissions. Should have I trashed iDVD prefs and if so, is there only one to trash?
drag and drop all incidents of the iDVD plist to the trash. Use the finder or spotlight to locate all incidents of plist for iDVD. Looks like this:
com.apple.iDVD.plist
secondly, you will need to repair permissions on the HD.
applications > utilities > apple's DU
third, delete all encoded assets from the advanced menu.
forth, recommend using different media like Verbatim DVD-R Minus media and burn from a disc image using apple's DU or Toast at 4x or slower.
fifth .....be very patient while it encodes and burns. i've seen some dvd's take up to 2 days.
sixth ....make certain you have no less than 20GB of available HD space.
Good luck!
SDMacuser

Audio gets out of sync after export and burn to iDVD - works in iMovie

I've burned my DVD show twice on iMovie and iDVD and the audio music tracks slowly get displaced over the course of the show (15 min) after exporting and burning to iDVD. It gets pushed back so that it starts later each new track...I've locked the audio to the playhead for each new audio track - however, there are some empty gaps between the tracks, does this have anything to do with the displacement? Or should it not matter since the tracks are locked?
I had it all synced up in the playback on iMovie and had it aligned with visuals, however, after burning, it gets displaced and everything gets off...
Any help would be appreciated, thank you
Chris

The problem:
http://www.dvformat.com/htm/features/2000/800/dv_formatfaq.htm
(Scroll down about two thirds to "What's the difference between locked and unlocked audio?" )
The solution:
Always use 16-bit/48kHz audio.
iMovie: Audio and Video Lose Synchronization
http://docs.info.apple.com/article.html?artnum=61636
A few possible solutions here:
http://www.danslagle.com/mac/iMovie/audio/1001.shtml
iMovie: Improving audio and video synchronization
http://docs.info.apple.com/article.html?artnum=42974

Constant crackling/pop + inability to install standard drivers + audio loss

Oh Lord, what a disaster Creative is. I have a Creative X-Fi XtremeGamer Fatalty Pro that worked fine under Windows XP for four straight years. Then on the fifth year when I upgraded to the Windows 7 x64 Beta it ceased to function. It never continued to work with the Release Candidate, RTM or Retail versions so I just gave up until a few days ago when I thought maybe Creative or the community fixed some of my issues...
Hah, fat chance. Anyways it all began with severe audio distortions, pops and crackling that would sometimes end in a flat-line tone or eternal static. No matter how many times I reinstalled my drivers, used older drivers or used user remedies nothing worked. So I just gave up, took out my sound card and sucked it up with my Realtek integrated motherboard audio (eugh).
Well I can't stand it anymore. I'm too much of an audiophile to settle for anything less so I tried my sound card out again. I still had the same problems only now I can barely install any Creative drivers as the installation will constantly ask about a file called layout.bin.[url="http://consumerdocs.installshield.com/selfservice/viewContent.do?externalId=Q0892&sliceId=" rel="nofollow"> I followed this solution[/url] but it does not work at all and there are no other responses on the issue.
But that's OK because I can still install the base X-Fi drivers. Unfortunately it never resolved my issue. Older drivers do not work. There's nothing other than crackling and popping and then an utter loss of audio. Then I heard about Daniel_K and used his drivers (X-Fi Prelude Beta and X-Fi Support Pack 2.0). I was elated when everything installed without a single issue and the audio was perfect... until after maybe an hour when the crackling came back. Then it started getting progressi'vely worse until you can't even decipher what's being heard. I tried a couple reinstalls which would fix the issue for a short spell but then it'd degrade exponentially from there.
On top of that I couldn't use any of the Creative software with either Creative's drivers or Daniel_K's. It would never detect my sound card even though Windows had no problem seeing it. So I spent literally 5 hours of my day prowling these forums, Google and my own experiments with no luck.
So rather than looking for a solution I'm just gonna ask for one. I have an EVGA 680i motherboard, Intel Core 2 Duo E6600 @ 3GHz, ATI Radeon HD 5850, 6GB RAM, Creative Sound Blaster X-Fi XtremeGamer Fatalty Pro and .5TB HDD space.
I know Creative stated that nForce motherboards might have an issue with the X-Fi but I've never had that problem with XP and I heard it's found in many other boards from different manufacturers. Creative also stated problems with more than 4GB of RAM but I've disabled all but 3.5GB of RAM with no success. I know Creative states that this is a PCI issue and that I should mess around with my BIOS settings. Updating my BIOS, disabling unneeded BIOS features, changing PCI slots and getting rid of my overclocks did nothing.
I [b][u]KNOW[/u][/b] that it's [color="#ff0000"]not a defecti've card. Everything works 00% with Ubuntu 9.0. Thanks for your time. I'm probably just wishing for gold to pour from the heavens and wasting my time. =(

ORe: Constant crackling/pop + inability to install standard drivers + audio loss? Alright, don't ask me how but I managed to mostly fix my crackling and popping issue. I fixed it with a combination of rearranging all of my hardware to different slots and reinstalling my drivers for the th time, only this time mashing Daniel_K's drivers with Creative's.
Now getting the drivers to work is another thing. I have sound and it's superb (the only reason why I'm willing to sacrifice so much of my time to get this to work) but I cannot get any other function out of my X-Fi. I can't open up the console, switch modes, enable effects, etc. Also, if I ATTEMPT to screw around with any audio settings my computer will start crackling like the devil and all of my hard work will be undone, prompting another reinstall requiring the utter removal of anything Creative on my PC to work.
Now I think the reason for this is because whenever I try to install any Creative software from Creative themselves (except the driver) it won't install. It will ask about a layout.bin, I would point the installation to where layout.bin is but then it'd give me an error (Error I-00). According to my install.log I'm missing something called CTShared. I try installing it but it doesn't seem to fix my problem.
Also, installing ALchemy will tell me that it couldn't create a shortcut after installation and will not work. Sometimes the installation will say that there is a newer version of a product and that it won't install even though there is no trace of anything Creative on my computer.
Now Daniel_K's drivers and software install fine, but the software WILL NOT detect my sound card. It will constantly tell me that the audio device wasn't found or that it's not installed. Windows sees it fine, though, and I get perfect audio. So I mashed Daniel_K's drivers with Creative (long process) and everything installs fine, everything looks to run fine but for some reason nothing will start up. So so much for my own modding attempts. >_<
Any solutions?

Random Audio Crackling and Popping on playback in FCP and Pro Tools

Hello All,
In both Pro Tools LE through an original MBox (with latest firmware), via USB and Final Cut Pro using an Edirol USB audio interface, I get random cracks and pops in different places that aren't in the actual audio files. They are not in the waveforms, and they never happen in the same spot twice...just random. There's no telling when they will be heard, but they are very loud and sharp, and I'm afraid of damaging my powered monitors, not to mention my nerves as I'm in the middle of an intense sound design for a film.
I've tried looking up this topic, and I've seen some topics mentioning sync/clock....like it's a problem with sync being generated internally, as opposed to using an external word clock generator. I never had this problem before on my older dual 2.0 PowerMac (PPC), and I really can't spring for a word clock generator right now...anyone else experience this with their Intel Mac Pro? I've looked for new firmware updates et al, but everything on the computer is up to date. This is really driving me nuts right now.
PowerMac G5 Mac OS X (10.4.3) Dual 1.8
Mac Pro Mac OS X (10.4.8) Dual 3.0

Interesting point about the winter/static. The only thing is that I never had those problems before with the same setup on my older dual 1.8 PPC G5 PowerMac, through several winters.
My current setup is a dual 3.0Ghz Intel Mac Pro with 3Gb of RAM. the RAM is the right kind and it has checked out as a-okay via numerous tests. The video card is the stock NVidea 7300 GT. For Final Cut Pro and general audio playback, I use an Edirol UA-1EX usb interface http://www.roland.com/products/en/UA-1EX/index.html (w/ updated drivers and all) hooked up through one USB port. For Pro Tools LE 7.3.1, I use an original Mbox, also updated with the latest firmware and all (got rid of the distorted noise problem with firmware update v22), also hooked up to a USB port. I used this exact same setup on my previous Dual 1.8 PPC G5 PowerMac with no such issues for several years. Both interfaces are routed to a Mixer, and onto my monitors. I don't think it's the mixer that's doing it because it didn't ever crackle/pop with my older G5, and still doesn't, which I still use for other things, but routed through the same sound system. I can understand the use of an external clock generator and such, but for many years, I never had this problem with random crackle/pop on playback with other computers that did not use an external sync/clock device. I would think that a computer as new and 'advanced' as the Intel Mac Pro would offer even better results than previous models. Again, the noises aren't printed onto the actual sound files, they come up randomly, but most often after adding a fade/volume change/effect and playing back.
I have just installed a PCI-Express USB 2.0 card for use with both the Edirol and MBox, just in case it was an issue with the built-in MAC USB ports. I will see if that helps.
Mac Pro Mac OS X (10.4.8) Dual 3.0
Mac Pro Mac OS X (10.4.3) Dual 3.0
Mac Pro Mac OS X (10.4.8) Dual 3.0
PowerMac G5 Mac OS X (10.4.3) Dual 1.8

Im trying to burn an iDVD and its saying that there is not enough free disk space for encoding the remaining assets.

Im trying to burn an iDVD and its saying that there is not enough free disk space for encoding the remaining assets. My main hard drive only has a few hundred Mb left on it so i bought a 1 Tb external hard drive and want to know how to make iDVD use the space on the external hard drive instead trying to use the main hard drive. Any help would be awesome! thanks

Hi
Yes - This is important.
Free Space - Must be on the Start-Up (Mac OS) hard disk and can not be used on any other.
My safe level is a minimum of 25Gb free space - to let iDVD and Mac OS run OK.
This is due to that Mac OS X is in reality UNIX and there by needs lot's of temporary space for temp. files and so does the application iDVD. And this can not be addressed elsewhere.
So to free up space - one thing is to move iMovie Events to an external hard disk BUT THIS MUST BE DONE Right Else all can be lost ! !
• Never move or adjust any folders Named - iMovie Events or iMovie Projects - on Desktop/Finder - links will breake and can be hard to impossibly to heal. ALL movings must be done within iMovie Application (it goes for iMovie'08 to 11)
• External Hard Disk - MUST BE - Mac OS Extended (hfs) formatted - UNIX/DOS/FAT32/Mac OS Exchange will NOT WORK FOR VIDEO - nearly everything else BUT NOT VIDEO.
Yours Bengt W

Audio Crackles & Pops in disk burned by iDVD

Similar Messages

Maybe you are looking for