Audio drops and comes back out of sync but dvd preview ok

hi All,
i put some photos and videos together in idvd project. The used one of their standard sound tracks to give the background music. The preview looked great so i burned the dvd but to my surprise when a particular video played around 8 min into the dvd the audio dropped and came about a min later with other photos getting it totally out of sync. I have tried removing few photos before that video comes to shift the video's location, there is a minor effect, it playes the clips audio in sync for slightly a sec or two longer but then drops and come back out of sync when it is showing still photos.
thanks in advance.

We have heard nothing about any changes in Encore for CC. I would be very surprised if anything fundamental, like the preview engine, has changed. We really don't know what is still the old sonic authorcore, what may have changed but is still sonic, and what is Adobe created. I have always assumed the preview is sonic.
Is the audio sync issue Bluray only, H.264 bluray only, or any particular audio formats? I don't recall getting the issue in Encore DVD playback.

Similar Messages

Encore cs6 preview out of sync but DVD fine

Hello,
Blu-ray project in Encore, exported audio and video from AME using the blu-ray h264 preset.
When I preview in Encore the sync is off but once I create the dvd and play it back, the sync is fine.

We have heard nothing about any changes in Encore for CC. I would be very surprised if anything fundamental, like the preview engine, has changed. We really don't know what is still the old sonic authorcore, what may have changed but is still sonic, and what is Adobe created. I have always assumed the preview is sonic.
Is the audio sync issue Bluray only, H.264 bluray only, or any particular audio formats? I don't recall getting the issue in Encore DVD playback.

Editing Audio from PP CS4 in Soundbooth coming back out of sync.

After cleaning up audio from PP CS4 using the "edit in Soundbooth" option. The audio comes back out of sync. How do I solve this?
thanks!

I am sorry for the confusion. When putting the playhead in the middle, the instrumental sounds as if somebody has slid it to the right. No, it does not start early and end late. It (the instrumental) is just at a later part of the song no matter where I put the playhead. For example, I put the playhead at a certain point of the song, and at that point the instrumental is sounding a part of the track located at an earlier location of the song (maybe a second or 2). There is no change in pitch...the instrumental sounds the same...it is just at the wrong location every time I put the playhead anywhere but the beginning of the song.

Audio and video is out of sync!

when I record audio and video together with my isight built in camera on my macbook pro with either quicktime pro, photobooth or imovie, when I play the clip back the audio and video is out of sync! like watching a kung foo movie. I've tried everything, I've taken my book into see a "Genius" at thew mac store and he said to me that the isight is made really for video conferencing and is really not supposed to be fully in sync? Uhh thats weird, so mac makes a product and puts it on all their laptops and it only sort of works?? I've been on the phone with apple care, did a bunch of things like disk utility repairs on permisions, then used the startup disk to do another permisions repair. I've uninstalled quicktime pro and re-installed it a couple of times? If anyone could give me some advice that would be great! I'm a little frustrated as you can probably see! thanks
cheers
m

Welcome to Apple Discussions, m
See if any of the suggestions offered here reduce your sync quality problem enough:
http://discussions.apple.com/thread.jspa?messageID=7089133&#7089133
If, after making certain that your Mac is running well, has plenty of free space on the correct drive, etc., your sync is still not close enough, you can manually re-sync any parts that are unacceptable to you using either QT Pro or iMovie.
If you check carefully, you will see that not even pro video is always perfectly synced. It is a lot of work to get things "nearly perfect," but, with a bit of practice, it doesn't take long to get things "close enough" for me.
I use the same simple process with either QT Pro or iMovie, so you can use whichever you find easiest. Whichever you use, keep the original AV clip safe and *_work on a copy_* in case something goes wrong.
If you do not already know how, here is my process, but you can adjust for your workflow:
(1) Copy of the audio track.
(2) Add the audio track copy to the AV file.
(3) Silence the original audio and work on audio copy.
(4) Insert small blank audio clips (or split and slide if using iMovie) if needed to make the audio later.
(5) Cut small bits out of quiet parts (or split and shorten in iMovie) if needed to make audio sooner.
(6) Repeat until satisfied and delete any tracks no longer needed.
(7) Save the adjusted AV file.
(8) Enjoy!
EZ Jim
G5 DP 1.8GHz w/Mac OS X (10.5.7) PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) External iSight

Photo Booth Audio and Video are out of sync?

Hi. So there is this glitch that when I take videos on Photo Booth the audio and video are out of sync. This started after I upgraded to Mountain Lion, and since I use Photo Booth a lot, I really do care. Is there anyway that I can fix this until Apple fixes this bug? Thanks.
Extra Info: The first video I took was not out of sync, but after that they got more and more out of sync.

I've read all the forums. It's a big problem for most Photobooth users, Apple acknowledges it, but does not yet have a fix.
The best solution I have come up with is to dump Photobooth (I know - it was a great program, wasn't it? But so was Hypercard) and use Quicktime to make videos. You'll have to spend a little more work savings or exporting, but at least Quicktime is free.
Just open Quicktime Player and under the File menu you'll see "Record New Movie."
The downward slide continues...

I want to delete a few contacts, apps, pics etc from my iphone, but when I delete and connect to my laptop they sync and come back again. How can I delete those items and not get them back when I connect my iphone to my laptop?

I want to delete a few contacts, apps, pics etc from my iphone, but when I delete and connect to my laptop they sync and come back again. How can I delete those items and not get them back when I connect my iphone to my laptop?
Also where exactly on the laptop is teh data stored.
Thank you!!

go to 'Edit' in the menu bar. Then choose 'Preferences'.
you'll see a pop-up and there's a tab called 'Devices' there. If you click that, you will be able to check a box that says 'prevent automatic syncing for iPods, iPads and iPhones' or something like that.
Hope this helps
NB: if you don't even see the menu bar that has options like 'File, Edit, View, etc', first click the black/white square button on the top left of your screen, and then click 'show menu bar'. It should pop right up.
Good luck

Updated FCP 5.1 to 5.1.2 - Audio and video now out of sync

I just noticed in my software update that FCP needed to be updated. So I updated the program.
Now when I open exisiting projects the audio and video are out of sync even though they appear perfectly in sync in the timeline. Has anyone else had this problem? The problem also persists when cutting clips in the timeline. I will use the razor tool to make the cut and I cut the clip on a ceratain frame in the timeline and then in the viewer the clip was really cuts a second or two later. Does anyone know what is going on?
Very furstrating to say the least. Any help is much appreciated.
Thanks,
Clay

I am still wondering why you're recommending that I use an external drive for this project.
Because the internal has more than enough to do running Mac OS X and the applications. It is constantly writing files. While DV video is at the lower end of the scale, it is still asking a lot of the drive's read and write head.
I always used external drives, but we had many problems with delays and processing problems.
At the very least, you should be using FireWire external drives. USB is no good for video as it delivers data in packets, not the sustained stream that video needs. The drives must also be formatted as Mac OS Extended. Windows FAT 16 of FAT 32 formatted drives have file size limits of 2 and 4 GB respectively. Anything larger is segemented and can cause problems on a Mac.

Audio and Video are Out of Sync

Hello,
This seems to be a reoccurring problem for me and I'd love some help getting it resolved once and for all. After capturing footage, the audio and video are out of sync in the clip AND when I drag it to the timeline. When I go through each part, it looks like the video hesitates often, which seems to be causing the misalignment of audio. But, once it is moved into alignment, it goes out of sync again throughout the remainder of the one hour video.
I'm capturing through a Canon Optura 50 Mini DV and editing with FCP 6.0.1. I have checked that the audio mode is set to 16 bit on the camera, and the capture settings have the audio rate for 48 KHz.
This same problem occurred when I was capturing another event last week.
PLEASE advise. It won't get aligned even if I take the hours and hours to move the audio left and right frame by frame.

I am still wondering why you're recommending that I use an external drive for this project.
Because the internal has more than enough to do running Mac OS X and the applications. It is constantly writing files. While DV video is at the lower end of the scale, it is still asking a lot of the drive's read and write head.
I always used external drives, but we had many problems with delays and processing problems.
At the very least, you should be using FireWire external drives. USB is no good for video as it delivers data in packets, not the sustained stream that video needs. The drives must also be formatted as Mac OS Extended. Windows FAT 16 of FAT 32 formatted drives have file size limits of 2 and 4 GB respectively. Anything larger is segemented and can cause problems on a Mac.

Flickering Screen (blanks out and comes back)

Hi all,
since a few days I have a rather weird problem with my mini. The mini is connected via DVI to a Samsung SyncMaster 173T and has been so for the last 2.5 years. Everything worked perfect until....
Scrolling to a website the screen suddenly went blank (black) and after a second it came back. This happened randomly and various places, always when scrolling with the third mouse button (mighty mouse bluetooth). I could not really reproduce it until this sunday. Fresh boot of the mini, start iTunes and browse the CoverArt with the third mousebutton. After a while (~20 seconds) the screen blanks and comes back. If I continue scrolling in blanks more often and sometimes I can also see strange lines flickering through the screen before it blanks. This is 100 % reproducable.
So I thought ok, this is probably some graphic card issue. For verification I started Nanosaur (3D-Game), but here no issues. Works just fine.
I then tried to start the Apple Hardware test from the Install CD (took we a while to figure out how to start it....), but this one seems either not to start or not to give a display after the start. So I can't see the results.
Additional info: Not did I move my Mac nor my screen. Everything is in the same place like minimum 1 year!
What can I do to check the root cause ?

You could try booting into Safe mode (hold down the shift key through a restart until you see a message on the screen that the Mac is starting safe) and run like that for a while to see if the problem goes away or not. If it clears up, then that would imply something about the configuration of your main account is causing the problem. If the problem persist under safe mode, then that would point more to a hardware problem, though I have to say those symptoms are very unique and difficult to account for as a hardware failure.
You could also try using a regular USB mouse for a while, though it's hard to see how the BT Mighty Mouse could cause this. Good luck.

Video images and sound are out of sync

Hi, I'm new to videocasts so please forgive me. I have a few video podcasts that play fine in iTunes and in other iPods but audio and images become out of sync when I play it on my Nano. Does anyone have any suggestions?

What format were the original items ?
What frame rate are they in the original ?
What format are they on the AppleTV (H264 video AAC audio is the most common, but there are others) ?
What is the video frame rate now ?
Most out of syncs come from an imperfect attempt to encode for AppleTV. ie. DVD frame rate is 29.97fps. Many encode this to 30fps. So the movie plays 0.1% too fast, too little for you to notice, but at the end of a 100 minute film, the audio is 6 seconds out of sync with the video. Or 3 seconds on a 45 minute TV show.
Also check the source. I'd had DVDs (Alien Resurrection) jump 10 seconds out of sync in the middle of the movie. Back to the shop for that one.

User clicks one link and goes to other and comes back state maintain prob

1st say 2 links r there,
aaa --> if u click on "aaa" (my requirement) as shown below.
problem : the bean values still maintaining when i go to "bbb" and come back to "aaa".
======
NOTE: when user enters all fields and clicks on button it goes to "second.jsp" their ajax response (1 table) generating. That means page wont get refreshed. (panel is fixed) only down 1 table will generate.
on FROM DATE AND TO DATE basis.
if user presses on F5 also state maintaining with the help of bean object.
i.e, say user in response table clicks on "page 5" then presses on F5 .
but problem is when user goes to "bbb" link or "ccc" or "dddd" (separate interface or link) which is not related to this
(they r nearly 50 interfaces or links) and comes back to "aaa" still old response is there.
NOTE: i can clear the bean object, but if i clear the bean object in "onload" or general i cant handle F5 issue.
bbb
ccc
ddd
sample
=====
first.jsp
=====
<jsp:useBean id="sd" class="TestPage" scope="session">
</jsp:useBean>
<jsp:useBean id="sptb" class="TestPageBean" scope="session">
</jsp:useBean>
<script type='text'/javascript'>
function testfun()
--ajax response.
forwarding to to
"second.jsp"
</script>
<%
HttpSession mdsession=request.getSession(false);
if(mdsession!=null){
String s1=sptb.getTxtname();
String s2=sptb.getTestselect();
%>
<form>
<table>
<tr><td><input type='text' name='fromdate' value='fromdate'></td></tr>
<tr><td><input type='text' name='todate' value='todate'></td></tr>
<tr><td><select name='testselect''><option value=1>aaa</option></select></td></tr>
<tr><td><input type='contains' name='txtname' value=''></td></tr>
<tr><td><input type='button' name='clickname' value='Click' onclick='testfun()'></td></tr>
</table>
</form>
<%
%>
second.jsp (this is ajax response)
=======
<%
String txtname= request.getParameter("txtname");
String testselect= request.getParameter("testselect");
String fromdate= request.getParameter("fromdate");
String todate= request.getParameter("todate");
--storing in bean
sptb.setTxtname(txtname);
sptb.setTestselect(testselect);
sptb.setTxtname(fromdate);
sptb.setTestselect(todate);
---database conn...resultset values retrieved on "fromdate" and "to date" basis
out.println("<table><tr><td>testeno</td><td></testename></td><td>fromdate</td></tr></td>");
while(rs.next())
out.println(rs.getString(3);
%>
output
====
input screen
1 fromdate
1 todate
1 selectbox
1 contains
1 button
-> after clicking on button ajax response displayed below is (with out page refresh)
1 table gets displayed on "FROM DATE" AND "TO DATE" BASIS
with pagination

Michael,
Thanks a lot for the reply.
In the case you have mentioned, how does application has to know the user is 'moving away'[clicking on other role] from the application.
Thanks in advance,
Regards,
Ganga

Can I just stop iCloud and go back to manually syncing?

How can I get out of iCloud. Have had nothing but trouble. Can I just stop iCloud and go back to manually syncing?

Yes you can stop iCloud and go back syncing manually. You can disable the whole iCloud account, or simply stopp iCloud for a certain app.

I put the CD or DVD in my iMac it stay for a while then it comes back out help please

I put the CD or DVD in my iMac it stay for a while then it comes back out help please

Akay3,
Please remember we are not there to see so you have to be much more descriptive. Please complete your profile and indicate which version of OS X is installed, what iMac you own and exactly what CD and/or DVD you are referring to so we have some basic clues.

HT1657 after renting a move and starting viewing I can not stop it and come back to in within the time frame. If i stop it it goes away not able to find it. Just like I did not rent it at all.

after renting a move and starting viewing I can not stop it and come back to in within the time frame. If i stop it it goes away not able to find it. Just like I did not rent it at all.

Hi,
We have rolled out a fix for this issue.
Please log off and log back in to your machine and the issue should be resolved automatically. In case that does not work, please manually run the msi installer posted here (may require reboot).
For details, please refer to the KB article here: Multiple RunOnce keys created 11.0.10 and 10.1.13 Acrobat | Reader
Please let us know if you still face any issues.
Thanks,
Ashu Mittal

Ical will not store info, I go to another app, and come back and the info is gone

Ical takes in an event, but after you leave Ical and come back, all the info is gone. Now I notice that there is no info at all in Ical, and it won't load from my info from my Ipad as well.

The Macbook Air is a low end Macintosh for graphics apps and you are asking it to perform a heavy pro workflow using a pro application. The integrated GPU of MBAs is a serious limiter to heavy graphics. Personally I would expect flaky performance with certain operations. In general I recommend that Aperture users choose boxes with independent GPUs and capable of taking 16 GB RAM if necessary.
It will be important to carefully optimize workflow. How much RAM is in the MBA? The most Apple specs is 8 GB but you can check OWC to see if you can go to 16 GB. My Aperture/Photoshop workflow paged out at 8 GB RAM before I upgraded to 16 GB RAM.
You should evaluate whether or not you have adequate RAM:
Look at the Page Outs number under System Memory on the Activity Monitor app before starting a typical Aperture/Photoshop work session and write the number down. Recheck the Page Outs count after working for a few hours and write the number down again. If the page outs change (manual calculation of ending page outs number minus starting page outs number) is not zero your workflow is RAM-starved.
Ignore the pie charts and other info in Activity Monitor because they can be misleading regarding RAM usage. For RAM analysis, manually count page outs before and after a work session.
HTH
-Allen

Audio drops and comes back out of sync but dvd preview ok

Similar Messages

Maybe you are looking for