Audio for HTML5 output

I am trying to publish to HTML5 using Captivate 7:
When the slide loads I want the audio to play automatically and then there is a button the user can press to repeat the audio...but when I publish Captivate tells me "internal error" and "publish failed"
Can I not just insert audio into a slide for use in HTML5 outputs?

Hello there,
Audio is supported in HTML5 outputs.
Could you please try clearing the preferences using the utility given along with Captivate (goto<installed directory>\Adobe Captivate 7 x64\utils\CleanPreferencesWin.bat)
Try publishing the project again.
If you still get the error, Could you please try to create a new project with audios and try publishing to html5.
If issue persists, please share the cptx with us (email-to: [email protected])
Thanks,
Mayank Mahajan

Similar Messages

  • Need help in decoding javascript tag for HTML5 output.

    Hello all,
    I am working on a project in Adobe captivate 7 64 bit which consists of around 500 slides with most of the slides being text and image. The problem I am facing is very unusual which I guess I am the first one to experience (as per my search on google and forums). So, after I publish my project the output works fine in html (local and online) BUT when I run index.html (i.e., HTML5 output) the course does not run and screen is blank.
    After spending a week on searching online and using the trail and error strategy I was able to find out that it was the URL text "F:\usrnew\purchase" placed in the the middle of the course which caused the whole damage. However the url was removed and the project was submitted.
    After spending some extra time I found out that the letter "\u" which is a javascript tag was causing the problem for the HTML5 output. I don't really know much about javascripting but found out that the tag can be decoded using some programming strategy. Now this is where my knowledge comes to a standby and needs a lift from you guys.
    Any ideas, help, knowledge sharing would be very helpful for me and all those who might face this issue in future.
    Looking forward for your views.
    Kind Regards,
    Mirza

    Voila! The issue is resolved.
    Solution: Change the single slash "\" to a double slash "\\".
    Cheers,
    Mirza

  • [FM12] Linking multiple books for HTML5 output

    Hi all,
    Here is the problem I'm facing :
    I've created several FM12 books. Each one has a life on its own, as the main purpose is to publish in PDF format.
    I would like publish in HTML5 to put all the books in an online help, that would be integrated into my company's website.
    I have a problem dealing with the structure of my online help.
    When putting out each book individually in HTML5, my TOC format is perfectly preserved as such :
    ChapterTitle
    - Level 1
    - Level 2
    - Level 3
    ChapterTitle
    - Level 1
    - Level 2
    - Level 3
    However, if i put all my books in a same master-book, and generate a master-TOC, the HTML5 Output breaks my TOC format, as I have the following result :
    Book 1 name
    - ChapterTitle
    - Level 1
    - Level 2
    - Level 3
    - ChapterTitle
    - Level 1
    - Level 2
    - Level 3
    Book 2 name
    - ChapterTitle
    - Level 1
    - Level 2
    - Level 3
    - ChapterTitle
    - Level 1
    - Level 2
    - Level 3
    Any hint or idea on how to solve this problem would be greatly appreciated. Thanks a lot !

    This question has been cross-posted to two different forum
    categories. Please direct any responses to the thread where the
    question was originally asked. You may do this by
    clicking
    here.
    Forum posting guidelines may be viewed by
    clicking
    here.

  • What is the best video format for streaming video in Captivate 6 for html5 output?

    I'm guessing it's h.264 mp4, but I haven't been able to get it to stream. Can you stream mp4s from Amazon S3?

    Hi Rod,
    That link is from the Captivate help file:
    You could also find this documented in the help file link:
    http://helpx.adobe.com/pdf/captivate_reference.pdf
    Look under the topic "Unsupported objects in HTML5 output".
    Thanks!

  • Anyone fixed the Audio problem for HTML5 to android yet?

    Just checking in for a solution to the audio not working on the html5 output for android

    You could try reading this: http://support.apple.com/kb/HT4199
    and
    this: http://support.apple.com/kb/TS3727

  • Hi there, can anyone tell me how to make make Garageband ignore HDMI as an audio output-device on a 2013 Mac Mini? Now it keeps on prompting me: Do you want want to use the HDMI device (monitor without audio) for audio output? Thanks in advance, Grtz T.

    Hi there,
    Can anyone tell me how to make make Garageband ignore HDMI as an audio output-device on a 2013 Mac mini i7 using an Apogee jam as an input for bass and a Behringer USB DAC with RCA audio output? Now it keeps on prompting me: Do you want want to use the HDMI device (monitor without audio) for audio output? I'm also suffering massive audio lag issues with the Apogee jam after waking the mini from sleepmode, wich pretty much renders it useless.
    Thanks in advance,
    Grtz T.

    I think the easiest way to do this is to have the EyeTV app running in one user account and sent via HDMI to the TV, and use a separate user account for Screen Sharing. Both logins can be active at the same time and with Lion you can connect via screen sharing to which ever login you need.
    With regards to the Mac video resolution changing, when it is not the current input on your AV receiver. This is 'normal', if the Mac sees no signal it drops down the a lower level. What you need is to buy a HDMI Detective Plus which tricks the Mac in to always seeing a signal and hence it will not drop down the resolution. See http://www.gefen.com/kvm/dproduct.jsp?prod_id=8005
    The Mac mini does have an IR receiver. This can be used with the EyeTV app, iTunes, and similar. Yes I believe EyeTV would run for prolonged periods quite happily, it is has been around for a long time and had most of the rough edges polished off. However one issue you will have to deal with is that it does not automatically update its program guide data. For this you might have to write or modify an AppleScript. Elgato support or their user forums will be a lot of help.
    You can set EyeTV to convert recordings to an iTunes (Apple TV) compatible format and then delete them from EyeTV.
    The HDMI Detective should solve your handshaking problems.

  • The old Apple TV had a port for Analog the new one does not.  Where do I find a (TosLink), Optical to Analog Audio for the Optical Output on the Apple TV so I can run my Analog outside speakers?

    Where do I find a TosLink, Optical to Analog Audio for the Optical Output on the Apple TV 2? 

    click here for information.

  • How to I customize HTML5 output for playbars?

    Hello:
    I am taking the default playbar (default.fla) and modifing it by adjusting the background height and button heights.
    I have successfully modified the default.fla file and published it as a SWF.  I placed this SWF into the en_US > Gallery > Playbars > AS3 folder and can select it from the skin editor menu in Captivate 7.
    When I publish in SWF, the playbar looks and acts exactly the way I want it to.
    But, the default playbar appears when I publish in HTML5 output.
    I can see the HTML folder and associated files under Templates > PlaybackFLA > HTML, but am wondering where I save the modified scripts so that the playbar will look the same in SWF and HTML5 output.
    Thank you,
    Ryan

    Hi Ryan,
    I have followed the steps written by you and was successfully able to modify the HTML5 playbar. Thanks for the help!
    Now I also need to change the positioning of the buttons in my playbar namely next, back, progress bar and exit and the biggest challenge here is to rotate the progress bar to 90 degrees anti-clockwise.
    I don't have good knowledge in CSS but a colleague told me that the styles written in the "playbarStyle.css" like ".playButton, .playButton:hover, .playbarBackGround" are defined somewhere in the Program Files folder.
    Guys, can you please help me out from this.
    Lilybiri RodWard Captiv8r www.cpguru.com
    Best Regards,
    Mirza

  • HTML5 Output for Adobe Captivate 6

    Hi,
    I really need some Help. I am making a static widget in captivate 6 to where it could also access the system variables in captivate (Like cpCmndPause, cpCmndExit and etc.) using Actionscript 3.0. Now, It is for the swf Output. I am making for swf Output and as well as Html5 Output. I made Successfully the Static Widget for the swf Output and my Problem is how I could Make this in HTML5 Output. I did make a .wdgt file to where it contain the swf directory and html5 directory, And I would like to know if How I could make/access the same system variables in captivate, and I think it would be through javascript right?. I really need your Help on how to do this.
    Is this available for the Html5 Output in Captivate? really need your Help. Thank  you.

    Do you have some links or example how to access those system variables in captivate (for HTML5 version)? I've doing this for almost one week but I didn't see any solutions forthis. I am making a new customized widget that could control the captivate commands like cpCmndPause,cpCmndNextSlide and other captivate commands. I'm making the .wdgt file in captivate so that it would support for both swf and html5 output. Thank you for your Help.

  • I want to create a new customized screen layout for responsive HTML5  output. I don't want to use the ones present in the gallery. What are the steps to do so?

    I don't wish to use the ones already present in the gallery. They do not meet my requirements. Therefore, I want to create/design my own screen layout for the responsive HTML5 output. Please let me know the steps to do so. How to create a SLZ file, what is the code that I need to write. What are the components that I need to create to have a complete screen layout to be used in a responsive HTML5 output.

    That would require inline formatting and I doubt that is an option.
    If I am following you, the header area is full width of the screen so I cannot see how it can be broader, Perhaps you mean deeper? A screenshot might help here. The change would be made in the layout.css file.
    That would be a change in the layout.css.
    I suspect that too is controlled by the layout.css.
    To make the changes you would have to go into the layout.css and modify that. As you will see, it is a very complex CSS and that is why I said creating you own layout is not easy. Hopefully when Willam is available again, he may be able to give you some more specific information.
    I think Willam will confirm that if you cannot read the existing CSS to make those changes, then creating your own skin would be beyond your capabilities. Please do not take any offence there, I am simply emphasising how complex a task it is to create a skin from scratch. It's not one I would take on.
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • Extrememusic for input (optical) and Onboard audio for output (HDMI). Can this be do

    I have a MB with onboard SPDIF for HDMI. When I install my extrememusic card it takes over and doesn't allow HDMI audio output anymore. But I want the extrememusic card for digital audio input (video capture) And the onboard audio for the SPDIFoutput (HDMI). Is there a way to use both the card and the onboard audio for these purposes?

    It's quite hard to advice without having the equal system in hands.
    Which one you have set to be as the preferred playback device and preferred recording device in system audio settings? Maybe onboard for playback and X-Fi for recording is maybe the way to go but, I can't say if this changes anything there?
    X-Fi also has Audio Creation Mode which is maybe the best for this type input connection ... use bit-matched mode if possible and ASIO.
    Depends on what you want to do there but, there are also some software you could use for to route signal from one card into other if this would be a sort of resolution (Virtual Audio Cable/Repeteater and Velbac comes into mind ... you should find links for these by searching this forum).
    jutapa

  • Video Issues with HTML5 Output

    Hello there,
    I have a project with several videos on seperate slides that are located inbetween normal content slides.
    Works fine with SWF output and HTML5 output viewed on the pc, but...
    when I test the course on an iPad the video plays quite fine the first time I watch it.
    However when I jump back to the video the screen stays black for the duration of the video.
    When there is audio in the video the audio plays but the screen stays black!
    What I happening here?
    Someone any ideas?
    Thanks in advance
    Ruwen

    Hello there,
    Have you inserted multi slide synchronized video or event video?
    and which format of video have you inserted?
    Please tell the complete version of Captivate 6 (help> about captivate) and which version of iOS is it?
    You can also try improve the slide quality to optimized or 24 bit in the properties of the slide (for every slide).
    Thanks.

  • Is there a widget for Volume Control for HTML5 projects

    Is there a Volume Control widget for HTML5 projects in Captivate 8? How does articulate do it?
    Is there a 3rd party Volume Control widget?

    Hi there
    "Adobe Captivate will need to change to complete."
    I'm assuming here you meant to type "compete". But that's the nature of any upgrade, no? I'm sure that Captivate will change.
    For what it's worth, I was toying with creating a simple audio player. Captivate does offer a way to increase the volume and decrease the volume using Advanced Actions. It works for SWF output. Unfortunately, it doesn't seem to work when Captivate produces HTML 5. I didn't test with Responsive output.
    Cheers... Rick

  • How can I get my audio input and output devices back? I have no sound and cannot see any of the devices in Audio MIDI Setup..??

    Hi, I tried to set up a new output audio device on my mac that would have multiple outputs (iBox Twist speaker and my internal speaker) but when I went to click onto one of the iBox Twist (there were 2 options available: iBox Twist and iBox Twist Stereo), Audio MIDI Setup crashed and when I finally got that back open, I found that there were no audio input or output devices to be found. My sound is working, as when I turn on my iMac, the starting sound still plays, however the volume control in the menu bar is no longer a black colour, but grey and when I try to change the sound on my keyboard it does not change. This already happened to me once, and after 3 hours I managed to fix it very simply (switching off Mac, unplugging power cord, leaving for 15 seconds, plug power cord back in and switch Mac back on, holding Alt, Cmd, P and R keys until you hear the Starting Up sound twice) however this same technique that fixed it once before is not working this time and I am still stuck without sound. I have tried Repair Permissions, rebooting in Safe Mode, Hardware Test and checking for Software Updates. Has anyone else had this problem and managed to fix it?
    Thanks in advance for any help anyone can give me!

    In case anyone has had the same problem as me, I have just managed to fix this by doing the following:
    Switch off Mac
    Switch back on in Safe Mode (Hit power button, then hold Shift key until a loading bar appears at the bottom of the screen).
    Switch off Mac again
    Remove power cord and wait 15 seconds
    Plug power cord back in and hold down the keys alt, cmd, p, r all at the same time until you hear Starting chime for a second time and hopefully your audio will back.

  • Is there a way to change the name of audio device inputs/outputs?

    Hi there hope someone can help me. I use my macs primarily for music production and I have several audio cards both USB and PCI on my MacPro and I use external audio cards with my MacBook Pro both running Mountain Lion. As I have many different outputs I would like to rename them from their defaults, in other words I would like to rename "Headphones" to "Studio Monitors" and so on.
    I have created Aggregate Devices which almost works as a solution as its possible to name them easily. The problem is with an Aggregate Device, the system Volume Control becomes greyed out and I can no longer change the volume using the Apple Keyboard.
    I'm hoping that someone might be able to tell me which system file holds the names for the Audio Inputs and Outputs so that I can basically apply a bit of a hack to change my inputs and outputs to something a little more transparent? I don't mind applying tweaks to plist files etc as I have done this numerous times in the past to tweak some aspects of OS X.
    The other solution would be to tweak the Aggregate Device settings to enable the volume control. Either option would be great especially when I am working on projects with friends who would be able to choose to listen to audio on a different set of monitors or headphones without having to ask me constantly which output is which.
    All help appreciated!

    These directions may be useful in the future but I was wondering how to change the actual name of the computer.
    You know when you log into your iMac and then it loads all of your preferences?
    Well at the very top of the login box, there is the name of your computer, I want to change that.
    Not short names for Home folders.
    Thank you though...
    Any other suggestions or solutions?
    Sam

Maybe you are looking for