Audio not working on airplay to apple tv

I am unable to airplay sound to my apple tv.  I am in the sound preferences and it will not allow me to select Apple TV airplay as my output.  What do I need to do?

Audio outputs to your Apple TV connected speakers by default. The settings are for setting it to output to other airplay enabled speakers.

Similar Messages

  • Audio is not working for airplay.

    Audio is not working for airplay. I tried changing the audio output in system preferences to Apple TV both before and after turning on Air Play as suggested in earlier discussion threads. That did not work.

    Hi there,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    Troubleshooting AirPlay and AirPlay Mirroring
    http://support.apple.com/kb/ts4215
    -Griff W.

  • After recent upgrade to Yosemite on Macbook air bluetooth audio cuts out and associated video stops with audio. Likewise with airplay and Apple TV. I have deleted all my saved wifi connections and restarted numerous times. I do not expect a resolutio

    After recent upgrade to Yosemite on Macbook air bluetooth audio cuts out and associated video stops with audio. Likewise with airplay and Apple TV. I have deleted all my saved wifi connections and restarted numerous times. I do not expect a resolution from the community, but hope to get the attention of Apple engineers. If you are having same problems or have a miracle cure I am all ears.

    May start my own thread, but I'm having similar issues.
    I've been using an old iMac (running 10.7.5) and Apple TV for years with no issues. Last week I bought a new Macbook Pro running Yosemite and have had audio issues multiple times. The weird thing is that sometimes it works flawlessly, other times (like now) I spend half an hour just trying to get a song to play.
    My issues are: When I got to "computers" in Apple TV to stream my music, my music is sometimes chopper or intermittent, and I seen to know when it's going to happen based on the status wheel just before it plays. When I choose a song, the status wheel will spin for an unusually long time, usually an indicator that the audio is either not going to work, or stutter.
    When it does finally pull up a song, the playhead sits at the beginning of the song for a good 3-5 seconds before actually playing. Then, when it starts playing, it's all downhill. It will play a few seconds, drop out, play a few more seconds, drop out, and then ultimately the playhead will keep moving across the song as if it's playing, but there's no audio.
    Again, this is a new phenomenon never experienced by me. I've tried everything I could think of, some of them all at once:
    • restart Apple TV
    • restart Macbook Pro
    • quite iTunes/open
    • turn off Home Sharing on iTunes then reconnect it
    • unplugging and cycling both my modem and router
    None of these have alleviated the problem.
    The odd thing is, like this morning, the audio started up perfectly and never gave me any issues. It wasn't until later in the day that it started. Perhaps after the macbook pro had been put to sleep? Not sure.
    Regardless, this is an annoying trait, one that's new to me and my system (as stated, worked flawlessly until my new purchase), and is 100% limited to either a) the macbook pro b) Yosemite or c) both of them.

  • AirPlay mirroring not working but AirPlay is?

    AirPlay mirroring not working but AirPlay is?

    I'm in the same boat.  Apple TV & iPad absolutely, positively up to date.  Airplay working.  When you swipe left to right, airplay icon is in fact present.  However, the only options are:
    I've root boot iPad, Apple TV, Airport extreme, computer same network (should have no bearing but why not) with no results.  Only options for Airplay are iPad & Apple TV.  HELP.

  • Sound/audio not work

    sound/audio not work
    Model- Compaq M2000.
    S/N; CNF550117L,
    P/N-EE462Pa#UUF
    M2235

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.             
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar                              

  • A s d f g keys not working on a wireless Apple keyboard for Imac

    a s d f g keys not working on a wireless Apple keyboard for Imac.
    When I type they on't work.
    *Exmple o complete entence.
    Plee help! Thi i very rutrtin. I on't wnt to ue cut n pte or ome letter.
    Thnk you in vnce.

    Make a Service appointment for the keyboard at your local AASP.
    Apple - Find Locations
    I'm not sure how old it is, but it is covered for 1 full year as long as it didn't take that 19 story dive.

  • Why does my iMessage not work even with my apple ID signed in?

    Why does my iMessage not work even with my apple ID signed in?

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    iOS: FaceTime is 'Unable to verify email because it is in use'
    http://support.apple.com/kb/TS3510
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
    http://support.apple.com/kb/HT5538
    How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
    http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Troubleshooting iMessage Issues: Some Useful Tips You Should Try
    http://www.igeeksblog.com/troubleshooting-imessage-issues/
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    FaceTime, Game Center, Messages: Troubleshooting sign in issues
    http://support.apple.com/kb/TS3970
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    How to Block Someone on FaceTime
    http://www.ehow.com/how_10033185_block-someone-facetime.html
    My Facetime Doesn't Ring
    https://discussions.apple.com/message/19087457
    Send an iMessage as a Text Message Instead with a Quick Tap & Hold
    http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
    To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
    How to Send SMS from iPad
    http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
    You can check the status of the FaceTime/iMessage servers at this link.
    http://www.apple.com/support/systemstatus/
     Cheers, Tom
    BTW- Your profile shows you have iOS 6.1.4 installed. The max iOS for an iPad is 6.1.3. iOS 6.1.4 is for iPhones only.

  • Iphone 5.1 update messed up sound. Audio not working in youtube, music and video apps. Phone is not muted! nor is volume turned down

    Iphone 5.1 update messed up sound. Audio not working in youtube, music and video apps. Phone is not muted! nor is volume turned down

    Basics from the User Guide are restart, reset, restore from backup, restore as NEW.  Unless you've tried ALL of these, you're not done troubleshooting.

  • Ac3 dts audio not working in my iphone but it works in my friends samsung mobile?pls help me.

    Iam using o player... Ac3 dts audio not working msg showing

    Settings > General > Reset > Reset Network Settings
    Contact the carrier.

  • HT201210 AUDIO NOT WORKING PROPERLY AFTER INSTALLED IOS7

    After installed ios 7
    photos not able to see fully
    audio not working properly.... [no treble, no depth in sound, very low soung even the volume is full]
    get strucks while playing games

    This board is full of people that are update crazy...
    even when they have perfectly good working systems.
    i know i thought well it's just a security update not a major update.
    Best advice... whenever updating the OS, unplug all
    firewire devices.
    will take note of that from now on.
    Was this auto-update? Try downloading the file and
    running the update again with all firewire devices
    unplugged.
    While the 828 is disconnected perform the factory
    reset
    again.
    Disconnect the firewire cable from the 828mkII
    -Press the Setup knob
    -Turn the Setup knob all the way to the right
    -Press the Select knob
    -Press the Value knob
    -Power off the interface and plug the firewire cable
    back
    in
    -Power the interface back on
    i have the original 828 not mark 2, so no reset i know of, just power on off.
    After the Mac updates... reboot and plugin the 828,
    see if that doesn't get you going.
    pancenter-
    cheers pancenter, i'll give it a whirl updating without the interface plugged in. thanks for all your help.

  • Domicile and billing address are Thailand. I want to buy a book in Ibooks Switzerland. However this does not work. Because my Apple ID applies to Ibooks Thai only.

    Domicile and billing address are Thailand. I want to buy a book in Ibooks Switzerland. However this does not work. Because my Apple ID applies to Ibooks Thai only.

    The best fix for your problem is to try getting your books from some other store which also has a free ereader app, such as Kindle, Nook, Kobo, GoogleBooks, Sony.

  • Windows 8.1 beats audio not working

    Product name: HP ENVY TouchSmart Sleekbook 4
    after update windows 8.1 beats audio not working
    This question was solved.
    View Solution.

    Download the file below and instll , Restart and give your beats a try again. If you cant find Beats go to (Control Panel) and search (Beats Audio) then right click on it and create a shortcut, you should now have a shortcut to Beats Audio on your (Desktop)...
    Let me know if this helps ...
    DOWNLOAD LINK
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&softwareitem=ob-124012-1

  • Laptop left Speaker audio not working

    Sir,
    I have dv-5 1102 tu model laptop, in that left speaker audio not working. But, in headphones & Speakers have no problem in both left & right audio.
    Kindly do the needful

    Hey @KKVK ,
    Welcome to the HP Forums!
    I understand your left speaker is not working on your dv5 notebook.
    If the headphones are working it would tell us the sound card is fine. The same properties are applied to the speakers and the headphones in your audio control settings.
    You could try a system restore to before the issue started to make sure it's not something in the operating system. To perform a system restore see the following guide: Using Microsoft System Restore (Windows 8) or Using Microsoft System Restore (Windows 7).
    If this fails I would suggest contacting HP Phone Support to send the notebook for service. Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the following link to get the support number for your region: Phone Assist Worldwide.
    Thanks!
    Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    The Great Deku Tree
    I work on behalf of HP.

  • Audio not working on channel 5 and 7,, okay on all others????

    audio  not working on channel 5 and 7,, okay on all others????

    dalharris wrote:
    audio  not working on channel 5 and 7,, okay on all others????
    Without knowing all of the specifics in your situation, you may want to try these options:
    - If you have a DTA, and your remote control has a LANG button on it, press it. 
    -  If you have an HD or SD full cable box:
    Most low or no audio issues can be corrected by setting the Optimal Stereo output of the cable box. Here are the steps: Press the Menu button twice on your remote control. Select Setup. Select Audio Setup Under the Optimal Stereo setting, choose "Select to Optimize" and press OK/Select on the remote control
    - The audio settings on your cable box may have accidentally been changed:
    Press the Menu button twice on the Comcast Universal Remote Control. A new screen below will appear, with the top-left option automatically selected.
    Use the down-arrow key (above the Info button) to navigate to Setup and press OK/Select (the center key on the remote control in the middle of the 4 arrow/directional buttons).
    Use the down-arrow key (above the Info button) to navigate to Audio setup and press OK/Select.
    The Default Audio Track will default to the first option–Channel default–which which is always the channel’s main audio track (unless it was previously changed).
    Press the right-arrow navigation key to change the audio track. Changing this selection will instantly change the audio.
    1. Press once for English
    2. Press twice for Spanish (Español) OR to activate Video Description (DVS)
    3. Press three times for French (Français) 4. Press four times for Portuguese (Portugues).
    5. Then press the Exit button (above the Volume button) to resume program viewing
    Please note: These audio options can only be heard if the program provider or cable channel is providing that additional audio option.
    - If the above does not help, look at the remote control for your TV set (not your cable box) as the TVs language settings may have been accidentally changed (sometimes labeled as MTS or SAP on the remote or via your TVs settings menu).

  • Audio not working when connected to HDTV

    I connected my MacBook Pro to my Samsung HDTV LN40D503F6F and also connected an HDMI cable to the TV using Apple mini DVI cable. I tried connecting to both HDMI/DVI 1 and HDMI 2. Video works fine when connected to both the HDMI ports, but the audio didnt work. I also purchased an a 3.5 mm audio to RCA cable and tried switichin between both the HDMI ports but still it is not working. Any solution would be great. Thanks !!!

    Hi:
    While trying to help you, I was looking along the same lines as you were (I assume).
    I did a search by the IDT 92HD73E audio codec and all I could find were drivers for system boards with Intel processors such as the driver you tried unsuccessfully.
    I have finally found a W8.1 driver for that codec from a desktop PC with an AMD processor and chipset.
    See if this one works...
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=cp-134120-1&cc=us&dlc=en&lc=en...

Maybe you are looking for