Audio problem with m2ts - Premiere CC

Hello
I have a windows 7 pc with 64 bits and it is installed on the Premiere CC.
I'm having problems with the audio, I installed the trial version, and the audio does not open in m2ts.
Is there any limitation for the trial version??

The trial version is fully functional.
Where exactly did the media come from?

Similar Messages

  • Audio-Problem with Adobe Premiere Pro CC 2014 by using long Clips in AVC-Intra Codec (4Gb Border)

    Hello
    We own a Panasonic camera (AJ-PX5000G) and we film in 1080p50 with the AVC-Intra100 Codec. When importing longer clips in Premiere Pro, the video is fully loaded, but the waveform of the sound ends at the Time Code 00:02:28:35.
    Sometimes the sound could be played after this Timecode but otherwise there is no audio. Even if we use the same clip several times we see that it works sometimes and sometimes not. It looks random.
    We also tried to import the Clips with Adobe Prelude directly from the P2-Card but there are the same problems.
    The Clips in 1080p50 AVC-Intra100 have a bitrate of 227Mbps. After 2 Minutes and 28 Seconds 4Gb are written on the P2-Card and the Camera starts a new picture file and 4 sound files..
    It looks like Adobe Premiere Pro has problems with the correct relation of the files that all get together to one clip.
    Is there anybody who can confirm this problem? Can anybody help me with this Premiere Problem?
    Dennis
    (Workstation:  Dell Precision T3600, Intel Xeon E5-1620 @ 3.60 GHz, 16 GB RAM, Windows 7 Professional 64-bit, Service Pack 1, Premiere Pro CC 2014.1 (Build 8.1.0)   )
    Mediainfo of the P2-Cards:
    General
    Complete name                            : \CONTENTS\VIDEO\0068T7.MXF
    Format                                   : MXF
    Format profile                           : OP-Atom
    Format settings                          : Closed / Complete
    File size                                : 3.92 GiB
    Duration                                 : 2mn 28s
    Overall bit rate                         : 227 Mbps
    Encoded date                             : 2014-10-15 13:33:41.000
    Writing application                      : Panasonic P2 2.0
    Writing library                          : Panasonic P2 2.0
    Video
    ID                                       : 2
    Format                                   : AVC
    Format/Info                              : Advanced Video Codec
    Format profile                           : High 4:2:[email protected]
    Format settings, CABAC                   : No
    Format settings, GOP                     : N=1
    Format settings, wrapping mode           : Clip
    Codec ID                                 : 0D01030102106002-0401020201323104
    Duration                                 : 2mn 28s
    Bit rate                                 : 227 Mbps
    Width                                    : 1 920 pixels
    Height                                   : 1 080 pixels
    Display aspect ratio                     : 16:9
    Frame rate                               : 50.000 fps
    Standard                                 : Component
    Color space                              : YUV
    Chroma subsampling                       : 4:2:2
    Bit depth                                : 10 bits
    Scan type                                : Progressive
    Bits/(Pixel*Frame)                       : 2.193
    Stream size                              : 3.92 GiB (100%)
    Color primaries                          : BT.709
    Transfer characteristics                 : BT.709
    Matrix coefficients                      : BT.709
    Mediainfo Audio-Datei P2-Card:
    General
    Complete name                            : \CONTENTS\AUDIO\0068T700.MXF
    Format                                   : MXF
    Format profile                           : OP-Atom
    Format settings                          : Closed / Complete
    File size                                : 13.6 MiB
    Duration                                 : 2mn 28s
    Overall bit rate mode                    : Constant
    Overall bit rate                         : 770 Kbps
    Encoded date                             : 2014-10-15 13:33:41.000
    Writing application                      : Panasonic P2 2.0
    Writing library                          : Panasonic P2 2.0
    Audio
    ID                                       : 3
    Format                                   : PCM
    Format settings, Endianness              : Little
    Format settings, wrapping mode           : Clip (AES)
    Codec ID                                 : 0D01030102060400
    Duration                                 : 2mn 28s
    Bit rate mode                            : Constant
    Bit rate                                 : 768 Kbps
    Channel(s)                               : 1 channel
    Sampling rate                            : 48.0 KHz
    Bit depth                                : 16 bits
    Stream size                              : 13.6 MiB (100%)

    Hi,
    we have the same problem!
    It is not possible to play audio with the AVC-Intra100 Codec fluently.
    Can anybody help?
    Thanks,
    Anja

  • Audio Problems with .m2t files

    Running Pr 5.0.3
    I have been shooting HDV on my Canon XH-A1 camcorder and recording the video on my Focus FS-H200.
    The resule is several large  .m2t files that I copy to my PC's hard disc.
    When I import them to Pr all the video is there but some files no sound and some have no sound at the end of the track
    Why?

    when I play it with QT i can hear both channels. Any
    idea how I can slove this problem?
    Both channels meaning right and left? Whether or not it's a mono or stereo audio stream, They both count as one track.

  • Problem with adobe premiere CS5 file not responding

    I have a problem with Adobe Premiere software, some time ago I was given a file in Adobe Premiere project contains a hard drive to my revision. but when i try to do the project on my computer I was often faced with the problem of not responding. What should I do with this constraint. Thank you.

    I would suggest your first action to be logging this question on the user forum for Adobe Premier, not this one for Adobe Captivate.
    Try here...

  • Problem with Adobe Premiere Elements 10 : error DW046

    Dear community members,
    I have bought Adobe Premiere Elements  10 and installed it from the DVDs on my MAC OSX10.5.8 on december 27, 2013
    When creating a new project , I get the following message :
    following a serious error, Premiere Elements 10 must stop
    Then I click OK and I get a new message :
    The Premiere 10 application has closed suddenly after having been rebooted
    Then I end up to the error report window. I have sent the error report  to Apple  ( I can send it to you if you want)
    I have also got the following error message :
    DW046 : following conflicting process were running, block : dynamiclinkmanager
    Notice : it seems this problem is occuring since I underwent a power failure while working on a project. When I want to open an existing project I get the following message :
    it seems that Premiere Elements has closed in an unexpected way during the last session. Do you want to open the previous project?
    When I say YES, I save it and it comes back to the welcome menu and I cannot see this project.
    I have tried to deinstall and reinstall Premiere 10 : this is impossible since I am required to deactivate dynamiclinkmanager that I cannot find.
    Notice that Adobe AIR is unable to find a solution whilst it recognizes there is a problem.
    Thanks you for your help

    AT Romano,
    The various links you have provided were very helpful. I could kill the dynamiclinkmanager.
    It seems that it is now working.
    Thank you, your reply was very quick and your advices very good
    Kitaguchi38
    Date: Wed, 1 Jan 2014 19:39:00 -0800
    From: [email protected]
    To: [email protected]
    Subject: problem with Adobe Premiere Elements 10 : error DW046
        Re: problem with Adobe Premiere Elements 10 : error DW046
        created by A.T. Romano in Premiere Elements - View the full discussion
    kitaguchi38
    When you get the message
    it seems that Premiere Elements has closed in an unexpected way during the last session. Do you want to open the previous project?
    Do you go to the last AutoSave to open that or do you go to the save location of the project file (project.prel) to open that file?
    Are you getting message to close the dynamiclinkmanager so that you can move forward?
    If so, please check out dynamiclinkmanager location in the following link
    http://helpx.adobe.com/photoshop-elements/kb/preference-file-locations -photoshop-elements.html
    Have you seen this Photoshop Elements Forum thread with the same DW046?
    http://support.muse.adobe.com/message/4771879
    More later.
    ATR
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5972397#5972397
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5972397#5972397
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5972397#5972397. In the Actions box on the right, click the Stop Email Notifications link.
               Start a new discussion in Premiere Elements at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • Problem with Adobe Premiere Elements 12 using Scary Halloween template

    I'm having a problem with Adobe Premiere Elements 12 using Scary Halloween template under Menu Theme.  My problem is the red line is default to Scenes.  I would like it to default to Play.  How can I do that? Is it a bug?
    Side Note:  Other template default to Play Movie
    Thanks

    jeffrey caban
    No bug. Just the way the .psd for the Scary Halloween template was put together.
    You are going to have to get into the .psd for the Scary Halloween template and rearrange the
    Layer Sets. Do you know how to do that? If not, I will give you very specific instructions on how to
    do that.
    You want the order of the Layer Sets to look like
    That is what worked for me just now to get the disc menu Preview to open to the main
    menu with the red highlight under Play.
    We will be watching for your reply.
    ATR

  • VGA problem with FiFA 2003 and Audio Problem with NHL2003

    i use onboard VGA
    800 x600for both games
    with no problem
    but for Fifa 2003
    the screen looks so dark...
    all players look like a black people(all  black color hair
    and black face))
    some audio problem with NHL 2003...

    Have you tried the following?
    Adjust monitor settings? i.e. contrast/brightness
    Video settings within the game? Some have gamma or brightness settings.
    Gamma correction in "Display Properties"?
    for starters anyway......

  • Firewire audio problems with OS X 10.5.6

    Hello,
    I’m experiencing audio problems with Firewire 400 on my Macbook running Mac OSX 10.5.6.
    I’ve got a 2.4Ghz IntelCore 2 Duo with 4 GB RAM and 59 GB available on the internal HD.
    It’s hooked up to a brand new Mackie D.4 mixer with 2 Firewire outputs. The problems occur on both Firewire outputs.
    I’ve installed automatically from the software update (which I will never do again) to 10.5.6. I never tried the D.4 with 10.5.5 so I can’t tell if the problems occur there also.
    The main problem is that after a couple of minutes of recording the sound starts to break up and get really distorted. After a while the sound comes back again.
    The second problem is that Soundtrack Pro or Audacity don’t get any audio input from the D.4, although audio input is clearly visible in System Preferences – Sound.
    The only sound program that works with all 14 Firewire channels is Ableton, but also in Ableton the distortion occurs.
    An example of the distortion can be checked here:
    http://media.kaalslag.com/firewire-distortion-problem-mackieD4+Macbook.mp3
    I’ve roamed several forums and sites to solve the problem and I tried these solutions:
    I updated again to 10.5.6. with the full combo download from the Apple site. Restarted. Problem still there.
    I shut Airport off, because lots of sites mentioned problems with Airport conflicting with audio/firewire. Didn’t work.
    I did the work around with shutting the Macbook off, disconnecting the D.4, restarting the Macbook, opening Audio/Midi Setup, connecting the D.4 again, toggling the format frequencies a couple of times. Again, no use.
    Right now I’m using my “old” Macbook again to record from vinyl. This one is still running on OSX 10.4.11. No problems so far.
    I’ve had the distortion problems occuring before with an USB interface. Hoped that the Mackie Firewire would solve the problem, but it seems now that there’s a serious audio Firewire problem which is still not solved in OSX 10.5.
    Any help, tips and/or a work around would be much appreciated. Thanks!

    You could try using another computer in Target Disk mode (as an "external HD"), or you can connect the firewire cable and disconnect all other network cables (turning off airport). Then on each computer go to the "Network" system preferences and select "Built-in Firewire" from the list of ports and choose "Manually" from the drop-down menu next to "Configure". Enter the following IP addresses and subnet masks, apply the changes.
    _Computer 1_
    IP Address: 192.168.1.1
    Subnet Mask: 255.255.255.0
    _Computer 2_
    IP Address: 192.168.1.2
    Subnet Mask: 255.255.255.0
    After those ip addresses are entered and you've clicked "Apply", ensure that for both computers you have file sharing enabled (done in the "Sharing" system preferences), and then check the Finder sidebar to see if the computers can see each other (their names should appear under "Shared" in the sidebar--if not, try restarting).
    If the computers dont appear (even after restarting), using the "Connect To" option that's available in the Finder's "Go" menu. In there, to connect to another computer enter it's IP address as follows:
    afp://IP_ADDRESS
    If you're on the computer with the ip address of 192.168.1.1, you would enter 192.168.1.2 as "IP_ADDRESS". The "afp" is the protocol (just like "http" for web), and stands for "Apple Filing Protocol"...Apple's file sharing protocol.

  • Big problems with installion Premiere Elements und Photoshop Elements 12

    Big problems with installion Premiere Elements und Photoshop Elements 12 auf Windows 7, shared technologies not found. Tried all  tips and  notes from the community (6 hours work), nothing helped./
    Habe Riesenprobleme mit Installation Premiere elements und PS elements 12, gemeinsam genutzte Technologien werden nicht installier, habe alle Hinweise aus den Foren bereits probiert (6 Stunden Arbeit). Wer weiß wirklichRat?

    Select a topic, then click I STILL NEED HELP to start Premiere Elements Online chat
    -http://helpx.adobe.com/contact.html?product=premiere-elements

  • Having problems with adobe premiere 8 freezing. cannot playback my videos. also, when i try to burn to DVD, does not recognize burner.

    having problems with adobe premiere 8 freezing. cannot playback my videos. also, when i try to burn to DVD, does not recognize burner. losing my work constantly cause of freezes and crashes.

    sunchick116
    Thanks for the reply.
    Anytime I am getting too far ahead, then let me know and we can work together on putting the essentials together for this troubleshooting.
    From your screenshot, you have a Windows 7 apparently 64 bit computer, lots of RAM. That computer would be great for Premiere Elements 11 Windows.
    But Premiere Elements 8 is only a 32 bit application running in the 32 bit compatibility mode of your 64 bit system. So all that RAM is excessive in a 32 bit system with its limitation of max supported installed RAM being 4 GB (of which 3 GB or less of that are available).
    So, the freezing and such could be explained by limited resources depending how much you have in the project when the freezing occurs and what formats are involved - like AVCHD. The burner not being recognized by Premiere Elements is probably another matter.
    Let us start here....another place where you could be getting hit on the resource side of things....
    1. Background Rendering and AutoAnalzyer features in version 8 are notorious for grabbing system resources. If you have them enabled, that could account for much of the program freezing. So, please make sure they are not selected.
    a. Background Rendering. In the Premiere Elements 8 workspace, go to Edit Menu/Preferences/General, and make sure there is no check mark next to Background Rendering option.
    b. AutoAnalzyer. In the Premiere Elements workspace, click on the Organizer tab in the row below the selected Organize header in order to open the Elements Organizer. In the Elements Organizer workspace, go to Edit Menu/Preferences/AutoAnalyzer Options and uncheck all the option under that.
    To get back to the Premiere Elements workspace from the Elements Organizer workspace, in the Elements Organizer workspace go to File Menu/Exit.
    For most of us, Premiere Elements 8 was unusable without the 8.0.1 Update. Did you install that? Have you ever worked successfully with your Premiere Elements 8 on the computer where it is now? And, was that with or without the 8.0.1 Update?
    Let us stop here and see how we are doing.
    Lots of other factors to get into including the burner recognition one.
    Thanks for looking at the troubleshooting comments.
    ATR

  • Hi, i have a problem with the premiere pro,i bought but when i made the download say that i have to buy,but i bought,what i have to make?

    hi, i have a problem with the premiere pro,i bought but when i made the download say that i have to buy,but i bought,what i have to make?

    Does your Cloud subscription properly show on your account page?
    If you have more than one email, are you sure you are using the correct Adobe ID?
    https://www.adobe.com/account.html for subscriptions on your Adobe page
    If yes
    Some general information for a Cloud subscription
    Cloud programs do not use serial numbers... you log in to your paid Cloud account to download & install & activate... you MAY need to log out of the Cloud and restart your computer and log back in to the Cloud for things to work
    Log out of your Cloud account... Restart your computer... Log in to your paid Cloud account
    -Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
    -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
    -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
    -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html
    -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp
    -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html
    If no
    This is an open forum, not Adobe support... you need Adobe staff to help
    Adobe contact information - http://helpx.adobe.com/contact.html
    -Select your product and what you need help with
    -Click on the blue box "Still need help? Contact us"

  • USB audio problems with 2013 iMac

    I'm having a strange audio problem with USB microphones and headsets. The issue with my Logitech H650e is shown in this screencast I recorded. In the first part of the screencast, I am not speaking into the mic—yet you can see the levels fluctuating as if there is static playing (not in a natural pattern that you'd see when someone is speaking). In the next part of the video I demonstrate that selecting the built-in iMac mic for input, and then re-selecting the Logitech headset temporarily solves the problem. You can see the input start to fluctuate normally as it should when I am speaking. But at 0:31 in the screencast, you can see the input levels freeze and stop registering anything. I continued to speak until the end of the screencast, but no input was detected. For this screencast, I was on a Go To Webinar call, but the problem occurs regardless of whether I'm using Skype, Go To Webinar, GarageBand or any other software.
    The problem with my Blue Yeti USB microphone is also different. In that case, the input does not freeze as it does with the Logitech headset. The levels appear as you would expect, and it seems to work. However, the person on the other end can hear static in the background, even though I don't hear it in my own headphones. I learned this because I just tried to do a Skype interview with the Blue Yeti, and the interviewer told me they could hear static. We closed Skype and called each other back twice, but the problem persisted. Then, suspecting the problem was related to what I described above with the Logitech, I unplugged the Yeti and then plugged it into my Macbook Air 2013 (also running Mavericks). Lo and behold the static completely disappeared.
    My Griffin iMic and Audio Technica lavalier mic (attached to the iMic) behaves similarly to the Yeti, except in this case I can hear the static when I speak with my monitoring headphones. The input works but I get a lot of cracking and static in the background. This was confirmed by calling the Skype Test Call number and recording a message, which is then played back.
    Here are the facts:
    All 3 of my USB audio microphones/headsets do not work with my 2013 iMac running Mavericks
    All 3 of these microphones/headsets worked fine with my 2008 Mac Pro running Mountain Lion
    All 3 of these microphones/headsets work fine with my 2013 Macbook Air running Mavericks
    In this other thread, several people are reporting similar issues with the iMac 2013 and Mavericks. At least two people did not have the issue when the iMac 2013 was running Mountain Lion. This of course suggests the issue is the combination of the iMac 2013 and Mavericks. 

    Apple>About This Mac>More Info>Service
    Please read the warranty paperwork that came w/your computer.
    You have 14 days to return the computer w/no questions asked. 
    You have 90 days of FREE phone tech support on top of your standard 1 year warranty unless you also purchased AppleCare which gives you an additional 2 years of coverage plus FREE phone support.
    Strongly suggest that you take FULL advantage of the above before it runs out.  Let Apple deal w/the problems.

  • Audio problems with Droid/X

    When sending voice messages using Cloudtalk, the recipient hears only garbage. I contacted Cloudtalk technical support, and it appears that the 3gp file sent by the phone is not recognized. This problem is known by them, and happens only on Droid/X.
    Anyone else is experiencing audio problems with the droid/x?

    That doesn't sound like an audio issue with the X, it sounds like a compatibility issue between the X and the service.

  • Audio problems with CHS 435

    Hello all, I'm having audio problems with my FiOS set top box. When I start to change channels I lose audio and can't get it back unless I turn the TV off/on or I change the HDMI source on my TV . Seems after changing a couple of channels the problem happens. I've tried the in home agent auto correct, and different HDMI cables. I have a Westinghouse TV and I'll try a firmware update for the TV and see if that fixes it. Any fix for this and the possibility that it might be the set top box ? I just got FiOS and all is going well besides this issue. Seems that the other STB that are model # 335 aren't having this problem.

    Some TVs have had issues with the HDMI handshake and the Audio. You may be required to use the separate bulkier HD Component cables with separate audio cables. Or try it as a solution on that TV.
    I have CHS 435 DVR on a Samsung, and 2 CHS 335s on different model Vizio TVs, all with HDMI, and no issues. Others have reported different issues. I did a search here with the following results. Perhaps this information will help.
    http://forums.verizon.com/t5/forums/searchpage/tab/message?filter=location&location=forum-board%3AFi...

  • Audio Problems with some HD channels (HBO mostly)

    I'm experiencing sporadic audio problems with a handful of HD channels.  Most noticably on HBO.
    When the audio is output through the television itself, it sounds OK... however if the audio is output through my home theater receiver and speakers, I can hear a lot of static and "crackling" on certain movies and shows.
    The issue isn't the home theater setup, as I have several other components that use it (AppleTV, Bluray, Xbox, etc.) and the audio sounds perfect from them.
    The only device that displays that poor audio is the FiOS Set Top Box and even then it's only on a few channels.
    I thought maybe that the optical audio cable between the set top box and the receiver may have been bad, so I replaced that.  Same problem even with the new cable.
    The problem is either with the Set Top Box itself or the audio levels on the stream from the channel provider.
    Has anyone experienced anything similar to this, and if so... did you resolve it somehow?
    Any help you could provide would be most appreciated.
    Thanks!

    Check the following.
    Help & Settings > Settings > Entitlement Information
    Here are possible entitlements mapped to channels.
    101 - 104 :  PSB HD
    407 - 433 :  Essential Extra / Unlimited Extra
    446 - 453 :  HD Extra
    501       :  Sky Sports 1
    502       :  Sky Sports 2
    507 - 509 :  BT Sport SD
    510 - 512 :  BT Sport HD
    513 - 514 :  Essential Extra / Unlimited Extra
    530 - 540 :  Sky Movies
    555 - 563 :  Kids Extra
    You need 'HD Extra' for channels 446 - 453. I have the free 'BT Sport HD' but that does not cover entertainment HD channels. You need to subscribe to the HD Extra bolt-on for £3 for them. Have you ordered HD Extra (it only became available from last Sunday)? 

Maybe you are looking for