Audio through the device?

Hello,
I am sure that this is one of those silly problems that once solved one can only think "how could I not see this myself".
I am recording audio tracks through a USB connected midi guitar amp, yamaha THr5.
Once i connect it, the audio doesn't come out of the headphones but only through the device.
I have tried to go use system preferences to select the USB connection only for audio IN but there is no why.
How can I solve this problem?
I want this device to be used only to send the audio signal, not to play the whole project.
Thanks in advance for your help.
Max

There is no workaround for this issue.

Similar Messages

  • How can I get synched audio through the computer rather than camera in FCE?

    There does not seem to be an easy way to listen to FCE audio through the computer's setup for internal or external speakers. I have for years used Detour to route all of my audio through an M-Audio Firewire 410 interface, and then on to my home stereo system. I then route all systems sounds and sounds in apps like iMail through the internal speaker. This works great. Except with Final Cut Express. For quite a while I could not do anything except play through a firewire connected to an attached Sony PC100 digital video camera, plugging headphones into it's jack.
    After many hours and reading many strings on this and other discussion boards, and even reading the product manual, I tried sending FCE through the computer speaker and sure enough it works. By that reasoning, I had Sound Prefs send all audio through the m-Audio setup and that works. Except now I must listen to all of the system sounds that way as well.
    OK, I could live with that for my editing sessions, except that now I am experiencing a sound synch delay of around one second. It's all fine when I switch back to the camera as the monitor, but not when routed through, what should be the better sound setup, having the comouter send the soud via the m-audio and stereo.
    G5 dual 2Mgz   Mac OS X (10.4.5)   m-audio firewire 410; 1.5G DDR SRAM;

    In final cut, you want the audio to be following the same path as the video - otherwise, as you have experienced, there are processing delays.
    If you are sending your video out firewire to an external monitor, the audio should follow. Take the audio off of the A/DV converter and route it to your speakers (or amp & speakers) from there.
    good luck.
    x

  • My Iphone 4s says connected to TV and will not let me watch any videos on Safari, and only plays sound through the device. I have not messed with the settings, and have not connected it to anything bluetooth either. It's update is IOS 6.1.3

    I have an Iphone 4S and It won't let me watch videos on my safari, which I do everyday. It says that I am connectef to a tv, yet I have not connected it to a tv during the entire time i've owned this product. I have not connected it to anything bluetooth either. It plays the sound through the device, but it will not play the video at all. the update is IOS 6.1.3

    Try disabling the computer's antivirus and firewall.
    - Next try the manual install method of:
    iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch
    Place the iPod in recovery mode after the firmware download is complete and then restore using the instructions in the article. Sometimes recovery mode timeouts and returns to disabled before the firmware download is complete.
    - Then try on another computer

  • How do I make my Mac not use the external mic on my Apple Earphones but output audio through the earphones?

    I want to use the microphone built in to the MacBook Pro while still outputting audio through the Apple Earphones. This is because the microphone on my earphones has stopped working. If anyone knows how to do this, please tell me

    Based on the info you provided, is this your printer?
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=219&lc=en&cc=us&dlc=en&sw _lang=&product=5058336#N187
    If so, it appears the do have a driver available for Lion.

  • HT4946 How do I backup ALL of my iPad content onto a newly purchased MacBook Air? I can't backup up apps or music from CDs through the device backup function.

    How do I backup ALL of my iPad content onto a newly purchased MacBook Air? I can't backup up apps or music from CDs through the device backup function.

    First you need to authorize your MBA with your iTunes account with iTunes if you haven't already done so.
    With your iPad connected and without syncing, at the iTunes menu bar go to File and select Transfer Purchases From - the name of your iPad. This will transfer/copy all iTunes content on your iPad that was purchased/downloaded from the iTunes store only.
    Photos on your iPad that were transferred from your old computer need to be transferred from your old computer to your MBA.
    Before syncing contacts with the Address Book and calendar events with iCal if you aren't syncing this content over the air with an iCloud account, enter one contact in the Address Book and one calendar event in iCal on your MBA. Make these up if needed, which can be deleted later. This will provided a merge prompt with the first sync for this data, which you want to select.
    Photos/videos in the Camera Roll can be imported by your MBA with iPhoto or the Image Capture application.

  • Factory reset through the device

    That is a really irritating solution. Is that really all you can do??
    I do not have my cable at home, and I am having the same problem. I am without a phone for at least the weekend. 
    There is no way to factory reset through the device?? Old blackberry devices had this. 
    Also all I did was upgrade an app through blackberry's app store. How can that cause such a critical issue?
    Is RIM working on that? I see this problem is very wide spread, makes you wonder what kind of QA work is being done on the dvices.
    [edited title]

    theomegachrist wrote:
    That is a really irritating solution. Is that really all you can do??
    I do not have my cable at home, and I am having the same problem. I am without a phone for at least the weekend. 
    There is no way to factory reset through the device?? Old blackberry devices had this. 
    Also all I did was upgrade an app through blackberry's app store. How can that cause such a critical issue?
    Is RIM working on that? I see this problem is very wide spread, makes you wonder what kind of QA work is being done on the dvices.
    Sure there's a factory reset... but not like a BlackBerry from five years ago, lol.
    Read this RIM Knowledge Base article to reset your device to the factory settings.
    KB18998 How to reset a BlackBerry smartphone to factory defaults
    In the future, please learn to create your own thread when you have your own personal issue to discuss... even if your issue might be "similar" the originally posted. yours is not the same, and posting in a existing thread like this just clutters the original posters thread.
    The "New Message" link is at the top left of each forum section page.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Known issue: Cortana does not play audio through the default playback device (Windows 10 Insider Preview SDK and tools, April 2015 release)

    When getting audio feedback from Cortana on a device with multiple playback endpoints (e.g., a device with a headset and an internal speaker), the playback may occur on the incorrect device. For example, Cortana may not send audio to the default device
    after the default has been changed in the control panel.

    There is no workaround for this issue.

  • Trying to record Stereo Mix with a monitor through my headphones.  Using Screenium to record Audio and Video, using Avid MBox Mini with MXL 909 Microphone for the audio through the interface.

    Basically, what I am trying to do is this:
    Record my screen through Screeenium, record my voice as audio through an Avid MBox Mini (interface) with a MXL 909 microphone to pick up the audio.  I have all that figured out.  I'm able to efficiently record my audio and screenplay through these instruments and programs.  What I am having trouble with is the stereo mix.  I am running into a slew of problems here... My goal: Add on the audio of a game that I am playing (for example, Amneisia) so that the audio for my game will be picked up internally, and not through the speakers to be recorded through the microphone.  I want there to be no external sound except me talking into my microphone.  I also want to be able to HEAR the audio of the game through my headphones (and if possible, myself as well, through a monitor maybe?)
    Problems I have run into so far:
    -Haven't gotten it to pick up in game audio at all while using headphone.  Can't figure this out
         -Downloaded soundflower, have the output as soundflower.  Not picking up anything, will put all my sound and midi settings at the end.
    -When I do record through my microphone, it is only picking up a single channel (left earpiece only, no right channel)
         -I have figured out it is NOT the equipment, I use Pro Tools and am able to pick up both channels with my mic, recorded a few tests. It's settings and I can't      figure it out
    -Trying not to run 16 million programs while running the game, will cause lag.
    Summed up:
    Trying to record:
    -Audio from gameplay of any game I am playing through alternative route of speakers (do NOT want to record game audio through speakers, internally)
    -Record voice through Avid MBox Mini and MXL 909 microphone.
    -Record screen gameplay through Screenium
    I followed a guide that told me to achieve "stereo mix'' I need to download soundflower and follow "X" steps.  That is done and these are my current settings:
    Audio Midi Setup - Stereo Mix custom Aggregate Device, Soundflower (2ch) selected, Avid Mbox Mini selected, Soundflower Output #1 has 2 channels (1-2), using Avid MBox mini for "Input" in order to record.  Using Soundflower AND Avid MBox mini as "Output" in order to hear the sounds and replay game sounds (could be the problem? Maybe?)
    Sound Settings - Output Stereo Mix (custom channel)  Input Avid MBox Mini (recording)
    I'm hoping this isn't too hard to understand.. I'm VERY bad at explaining information regarding computers.. It's hard becuase I don't understand it.  I can clarify anything that I am able to, so any help on finding certain things would be greatly appreciated.
    My computer: Macbook Pro MAC OS X Lion (11G63) 10.7.5  2.4 GHz Intel Core i7 4GB 13333 MGz DDR3  (If any of this is imporant)

    Hey guys,
    I tried to do some research and it looks like you need to have an external device and its drivers, such as an external microphone, installed on the computer to record audio that can be saved as a sound file. Another Suggestion is to try an auxiliary spliter for your headphones and external speakers?
    What software are you using to record your game?
    If anyone knows anything different, please let me know.
    Thank you for being a part of the Lenovo Family,
    Catie
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Donate KUDOS and Click "Accepted Solution"

  • Hearing the audio through the headset

    Right, i have had this problem for ages, i like to play online games on my laptop and talk on skype. Whenever i plug in my headphones i can hear the game volume but if i go on skype the game audio will come out of my laptop and the skype will come through the headset and i cant hear both audios through my headset help?????
    i have a hp pavilion entertainment pc

    Hey Smophiez,
    Sometimes Windows sets one device as the communications device (ex. for Skype), and another to the normal audio device.
    To change this, right click on the volume control icon right beside the clock, and click Playback Devices. You should see a list of different audio devices, for example "Headphones" and "Speakers" or something like that. Anyways, pick the device you want, for example your headset/headphones, right click on it, and click "Set as Default Device". Right click on it again, and click "Set as Default Communications Device". This way, all audio will be routed only through that device that you've picked.
    I am an HP employee.
    • Say thanks by clicking the 'Thumbs Up' button on the left
    • Make it easier for other people to find solutions, by marking my answer with 'Accept as Solution' if it solves your issue

  • Why does my Apple TV on 5.2.1 not send audio through the optical cable to my ONKYO receiver?

    So I have my ATV hooked up to my tv through the HDMI cable because when I try do it it through my AV Receiver tx-ar608 from ONKYO then there is no picture nor any audio. The receiver works fine with anything else (e.g. bluray player, wii, playstation, laptop). To answer some questions that might pop up, yes I am very sure I am on the right channel and yes, the audio settings of the AVR are compatible with the ones of ATV. Now I can plug my HDMI cable into my tv and get some sound but as its only the tv speakers its pretty crap and i bought my ATV mainly to listen to music from my library. I tried to connedt my ATV with a digital audio cable and I can see the red light and it is plugged into the right socket and it is on the right setting and channel (games) but there is no audio from the receiver but only from the tv... Please help me with this.
    Much appreciated, Neil

    Hello Damian!
    Thank´s for your helping answer!
    Let me ask some more questions for better understanding:
    Is there a difference to load the new software with usb / Itunes ? Will Itunes find automatically the new apple TV update 5.0 (we talk about the latest and newest update with the different user surface)
    If "my" itunes won´t find the new software update, is the are chance or possibility to install the downloaded version, which i found in the internet. It is the version 1_5.0_9B179b_Restore.ipsw (487 MB size)? How will i get this version into Itunes?
    Maybe you can answer my new questions.
    Thank you once again for your efforts.
    rommi2

  • Mac book pro playing out audio through the HDMI but only in mono since update

    Hi there
    I've got a mid 2010 macbook pro that used to play audio and video perfectly through the HDMI output until I updated to 10.7.4 and the
    firmware (11E53). Now it plays in mono and only on the right speaker. It seems to have disabled the ability to change audio preferences on my AV receiver as well. Has any one else been getting similar problems ?
    Thanks
    Hughspeers

    First, uninstall "SuperTV" (whatever that is) according to the developer's instructions. It isn't working and it's filling the log with noise.
    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
    Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Post the messages logged before the boot, while the system was unresponsive or was failing to shut down. Please include the BOOT_TIME message at the end of the log extract.
    Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message. When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    PLEASE DO NOT INDISCRIMINATELY DUMP THOUSANDS OF LINES FROM THE LOG INTO A MESSAGE. If you do that, I will not respond.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
    Step 2
    Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

  • HT6114 I'm still getting audio distortion when I input audio through the minijack.

    I updated to Mavericks, and now when I plug my iPhone in with the miniplug with a male-to-male cord, I get a pitch shift that happens randomly through Quicktime audio recording.
    Since I don't have my music backed up on this computer, I input my iPhone's music through a cord and use the audio recording feature. It's worked great for over a year until I upgraded to Mavericks, and I hoped this update would have fixed it since it said "• Fixes an issue that my cause audio distortion on certain Macs."

    Is it just sites like YouTube? Can you play music files-mp3/cd ,hear Windows system sounds,etc?
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • Will GarageBand ever be able to play music (audio) through the AV Adapter?

    I purchased the Apple AV Adapter to be able to play the Garageband ap through my HDTV and stereo system. When will this issue be fixed??

    speculation is against the ToS here, however you should let Apple know what features you want:
    http://www.bulletsandbones.com/GB/GBFAQ.html#sendfeedback
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • I want to play iPad audio through the car stereo. Any suggestions?

    I will need to use an FM transmitter as I don't have an auxiliary input on the stereo.

    you can add an auxiliary audio adapter to almost any vehicle from 1998 and up using the external cd changer controls or satellite controls  car stereo aux input

  • Can you use a mobile broadband for Apple TV. My mobile prepaid is wifi but does it have to have credit on it to or can atv still stream through the device.

    I have a mobile prepaid broadband. I want to buy a Apple TV but I'm unsure about whether it will work with my mobile broadband.
    It is wifi.  Does  my wifi have to have credit on it for the atv to work.  It still works you just can't connect to the Internet with it unless I buy credit.  I just need to make sure.  I want to use my iPad and view on my he tv.

    Welcome to the Apple Community.
    It may well work but will likely be far too slow and far to expensive.

Maybe you are looking for