Audio works in audio chat, but not in video chats.

So, when I start an audio chat with a friend, we can hear each other just fine. I then switch over to a video chat, and she can hear me, but I can't hear her. I already had to do all sorts of port forwarding in the firewall settings and router in order to rid myself of error -8... this is kind of frustrating!
I fixed the problem a week or so back by simply restarting iChat. When I tried that this time, no dice. Any ideas? Seems odd that it would work in audio chat but not in video chat...

I am having the same issue. Last night my sister and I did a video chat (which took some doing- we are both neophytes which it comes to this technology). It was great! But we had no audio. So we typed our conversation for quite awhile till my sister turned on her speakers...... Then she could hear me!! Now we were excited. But I never could hear them. On the video window there were 3 icons at the bottom, one being a microphone icon which had a line through it. So we are assuming the audio problem is on her end (she's using a Dell) and not at my end (since she could hear me)- is that correct? I checked all my settings and I had my speakers on the whole time with the volume maxed out. I could hear clicks when she wiggled something on her speakers but that was it. Any clue what she needs to check? I know I am posting in a Mac forum but we are giving it try again tomorrow and it would be nice to hear her. I know that there are plenty of us Mac users that have relatives that use PC's so maybe someone might have an answer. Will keep searching though. Judy

Similar Messages

HP Pavilion 15-p027ne, Audio working through headphones/earphones but not through speakers

HP Pavilion 15-p027ne:
Audio working through headphones/earphones but not through speakers.
I downgraded from windows 8.1 to Windows 7 (64-bit) and the problem is still not resolved.
Appreciate any troubleshooting tips.
Thanks.
- HP Pavilion User.

Hi there @donimuha
Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel.
I understand that you are getting sound from the headphones/earplugs but not from the system speakers. I am happy to assist you with this.
As the sound is working through the audio jack, I will assume for now that the audio driver is fine. Please check through the following page, which is very comprehensive. If you are still having a problem it is possibly a hardware issue with the speakers.
No Sound from the Speakers (Windows 7)
Let me know if that works for you.
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Why does GarageBand audio work for guest user but not my account?

Hello, I have a 15-inch MacBook Pro (2.2 GHz Intel Core i7, 4GB 1333 MHz DDR3) from late 2011 that I bought brand new in 2012. I'm running OS X Mavericks 10.9.4 and my MacBook has 500 GB of storage.
About a month or two ago I tried to download the new GarageBand (10.0.2) but I had trouble completing the loops download. The download would stop halfway through because of a network error. So last week I decided to try to download it again, and I was able to do so after reading some discussions about the issue. I successfully completed the download in safety mode and then I restarted my MacBook. At this point I was able to open GarageBand 10.0.2 and create a new project. Unfortunately, there was no audio coming through the output and sound bar for the various audio components in GarageBand. I had no audio when previewing the loops or playing it back in an audio track. I didn't really test anything else out because I figured I needed to fix this problem first. I have read many discussion boards about audio problems with GarageBand. I have already made sure everything is set properly in the GarageBand preferences and the audio preferences in system preferences. I've tried restarting GarageBand and restarting the computer.
This evening I found a discussion from the username icewhatice and they seemed to have had my exact problem. I'm not sure that I found the answer on this discussion though. For reference, this is what icewhatice posted: "I have no audio coming from Garageband 10.0.2. Downloaded it on Saturday and have spent the last two days trying to figure out why it won't work. I'm using a macbook pro with an Alesis QX49. GB registers keyboard when I plug it in but no sound whatsoever, not even from the onscreen keyboard. It seems to read the keyboard as if I play a C chord, it appears in the display. I've done all the obvious stuff like check preferences, restart, I've deleted and downloaded new GB several times and always with same result. Actually, it took me about four attempts to download it in the first place as I was getting an internet connection error message right at the end of the download, and I see others have had that problem. Managed to solve that by downloading in safe mode but now the no sound thing is driving me absolutely crazy because I can't play my keyboard!!!!! Also, worth noting that there is no audio level being read anywhere, I believe in the new version this appears in the volume control at the top. I've also looked into it potentially being a problem with my keyboard and it possibly needing an update but can't find any difinitive answer for that anywhere. I've stopped looking into that because the on screen keyboard doesn't even work - if that worked then I would know at least GB works and it's something to do with the keyboard. So, I am at a complete loss. If anyone has any ideas about why this is happening or what I could do to solve then I would be very grateful."
After reading this, I realized that I am unable to create new tracks, and I realized that I have the same problems with old projects saved from the last version of GarageBand I had. I have not tried to download GarageBand again since it did not work for icewhatice. léonie ended this post by saying: "Something is certainly wrong - either the current project, some settings in your user account, or the downloaded GarageBand version. Or incompatible software may be interfering. If a new project does not work, try to test by logging into a different user account, for example the "Guest User" account. Create a new project using this account. Does GarageBand work better from this account? Then we will need to troubleshoot your preferences."
I have tried this and started a new GarageBand project in the "Guest User" account. GarageBand was working fine in the "Guest User" account and all of the audio was working properly. Does anyone know how I should troubleshoot my preferences?

If an application is working in a different account, but not in your regular account,try t find out, what you configured differently in your own account, for example start-up items or preference panes you are using, applications and other helper tools, that are only installed for your regular account. As a first guess, remove GarageBands preference files from the user library in your Home folder.
But you will have to reset all settings you did in the GarageBand preferences dialog. And GarageBand will not remember the last project. You'll have to find the file manually.
Remove these files from your User Library to a folder on your Desktop:
~/Library/Containers/com.apple.garageband10/
~/Library/Preferences/com.apple.garageband.plist
~/Library/Caches/garageband
Quit GarageBand, then remove the files to a folder on the Desktop and restart the computer, before trying again to open GarageBand.
You user library may still be hidden, as is the default in Mavericks: To open your hidden user library:
Select the "Home" folder icon (the little house) in the Finder's sidebar and press the key combination ⌘J to open the "view options".
Enable "Show Library Folder".
Then open the Home folder and open the Library folder inside and navigate to the Preferences, Caches, or Containers folder. Remove these folders completely - don't leave anything inside: ~/Library/Containers/com.apple.garageband10/,
~/Library/Caches/garageband .

Yosemite/iOS 8 - Airplay audio working from iPhone 6 but not from macbook

I have a 2012 macbook pro that I've just upgraded to Yosemite and a new iPhone 6. My airplay setup is a Pioneer VSX-1121 receiver that has built-in airplay. My iPhone can connect via airplay to the receiver and it works perfectly to play all my audio. My laptop however, cannot. When I use option-click to click on the speaker icon in the bar I even see the icon for my receiver there - but when I click on it nothing happens.
In the System Preferences I can't see it in the sound panel though...
Here is the output of Console when I attempt to connect to the speakers:
Oct 30 18:25:07 mbp.local discoveryd[50]: AwdlD2d AwdlD2dStartBrowsingForKey: '_airplay' Browsing service started
Oct 30 18:25:07 mbp.local discoveryd[50]: AwdlD2d AwdlD2dStartBrowsingForKey: '_raop' Browsing service started
Oct 30 18:25:07 mbp.local discoveryd[50]: AwdlD2d AwdlD2dStopBrowsingForKey: '_airplay' Browsing service stopped
Oct 30 18:25:07 mbp.local discoveryd[50]: AwdlD2d AwdlD2dStopBrowsingForKey: '_raop' Browsing service stopped
Oct 30 18:25:08 mbp.local SystemUIServer[696]: 2014-10-30 06:25:08.674530 PM [AirPlayAVSys] Picking route 'VSX-1121' (00:E0:36:D3:39:AF)
Oct 30 18:25:08 mbp.local SystemUIServer[696]: 2014-10-30 06:25:08.675629 PM [AirPlayAVSys] Selecting endpoint 00:E0:36:D3:39:AF, item 1 for (audio only)
Oct 30 18:25:08 mbp.local coreaudiod[698]: 2014-10-30 06:25:08.676725 PM [AirPlay] Selecting endpoint 00:E0:36:D3:39:AF "VSX-1121" for A/V
I don't have any logs of a successful attempt so I'm not sure what that looks like in Yosemite..any help appreciated.
For the record, I've tried a PRAM and SMC reset to no avail.

THis "fix" maybe for the missing AirPlay icon in iTunes. But it wouldn't hurt to try it for this issue. I had the missing icon, did this and it worked. I also re enabled the IPv6 and it continued to work.
1) open control panel.
2)Choose Network and internet
3)Select the VIEW NETWORK STATUS TASKS under NETWORK and SHARING CENTER section
4) Choose the active network connection. It is usually name " wireless Network Connection 1" or something similiar.
5) Click the properties button
6) If the Internet PROTOCOL VERSION 6(TCP/IPv6) is checked, uncheck it, then click OK.
7) Click CLOSE
8) Restart iTunes and try to use the Home Sharing feature again.
KOT

Can text chat, but can't video chat

Hello-
My ichat/isight use to work just fine. I haven't changed any settings as far as I know (unless I did something inadvertently) and suddenly now I can continue to text message but I can't get the camera to connect. I send an invitation to video and once the person on the other ends accepts we each get errors saying that the video failed because the other person did not respond.
Please any help would be greatly appreciated.
Thanks,
jessica
PowerBook G4 Mac OS X (10.3.9) airport connection

Ralph - it's late, so I don't have any one to text chat with at the moment. But I thought I would at least trying to connect to one of the test connections again - it failed again. Here is the log from Terminal.
Last login: Wed Jun 7 21:27:26 on console
Welcome to Darwin!
Jessica-Elliotts-Computer:~ Jessica$ /Applications/iChat.app/Contents/MacOS/iChat -errorLogLevel 7
215406.650364
VideoConferenceFramework version 188.0 - 07232004.1 - Aug 25 2004
215406.651536 Checking H263 hardware rules
215406.652371 Satisfied rule #4 (30:1)
215406.671016 ### NEW STATE: to: VC_INIT, from: VC_INVALID
215406.672719 ### NEW STATE: to: VC_IDLE, from: VC_INIT
215406.673279 UPnP init passed
215406.673582 NATTraversal created
215406.673984 Bandwidth based on QT prefs = 1000
215406.674055 Found 1 cameras:
215406.674149 iSight - 2857630788217138
215406.674498 Found 1 cameras:
215406.674563 iSight - 2857630788217138
215406.674703 selectCameraByGUID: 2857630788217138 returned 1
215406.693878 Microphone devices:
215406.698636 iSight Built-in
215406.699751 Internal microphone
215406.700532 Line In
215406.708678 Microphone devices:
215406.709975 iSight Built-in
215406.710823 Internal microphone
215406.711806 Line In
215406.713345 Selected mic: iSight
215406.716149 Microphone devices:
215406.717539 iSight Built-in
215406.718869 Internal microphone
215406.719600 Line In
215406.722313 Microphone devices:
215406.723663 iSight Built-in
215406.724483 Internal microphone
215406.725134 Line In
215406.725756 Selected mic: iSight
215406.738623 UPnP Router Info:
- manufacturer [Linksys Inc.]
- friendly name [Residential Gateway Device]
- model name [WRT54G]
- model desc [Internet Access Server]
215406.740757 UPnP: Begin TCPProc
215406.758325 selectedCamera returned iSight
215406.759477 selectedCamera returned iSight
215406.766052 Found 1 cameras:
215406.767001 iSight - 2857630788217138
215407.775038 UPnP: TCPProc begin loop
215430.966226 Microphone: callback thread: STANDARD; EXTENDED timeshare: 0; PRECEDENCE importance: 17
215430.966726 Microphone: null device thread: STANDARD; EXTENDED timeshare: 0; PRECEDENCE importance: 17
215430.990526 Microphone devices:
215430.990601 Camera_IsDV = 0
215430.991400 iSight Built-in
215430.991974 Internal microphone
215430.992028 Line In
215430.993727 Microphone devices:
215430.993779 Camera_IsDV = 0
215430.993885 iSight Built-in
215430.993986 Internal microphone
215430.994021 Line In
215430.994083 Selected mic: iSight
215431.146759 UPnP Router Info:
- manufacturer [Linksys Inc.]
- friendly name [Residential Gateway Device]
- model name [WRT54G]
- model desc [Internet Access Server]
215431.867177 SIPManager init
215431.956286 SNATMAP Configuration Data: snatmap://snatmap.mac.com:5678
215431.956386 acquireSNATMAPConfigurationProc: Refresh UPnP status via SIP
215431.956839 SIPUpdateExternalInfo, force = 0
215431.957840 Transport(UDP) Thread start...
215431.980694 Sending SNATMAP heartbeat to 11FAF895:5678
215432.061850 SNATMAP heartbeat resulted in IP change (from: 0 to: 45FF0198)
215432.061923 SNATMAP heartbeat resulted in port change (from: 0 to: 5060)
215433.141778 UPnP address = 69.255.1.152
215434.340667 UPnP eport 5060 already mapped: retry next
215435.541711 UPnP eport 5061 already mapped: retry next
215435.732607 Diffusion prefilter disabled
215435.734404 Temporal prefilter disabled
215435.735148 startPreview returned 0
215435.753634 Updating local frame notification.
215436.743399 UPnP eport 5062 already mapped: retry next
215438.971515 UPnP SendSOAPMsg got no TCP response (0)
215438.971765 NAGetExternalMapping failed with error: -1
215438.972407 SIPUpdateExternalInfo, force = 0
215438.972489 SIPUpdateExternalInfo, force = 0
215438.972660 SIPUpdateExternalInfo, force = 0
215438.972694 count of local IP's = 2
215438.972720 LOCAL: ifname=[external], IP=[69.255.1.152], PORT = 5060
215438.972738 LOCAL: ifname=[en1(IPv6)], IP=[fe80:0005:0000:0000:0211:24ff:fe95:be8e], PORT = 5060
215438.972771 LOCAL: ifname=[en1], IP=[192.168.1.111], PORT = 5060
215438.972790 LOCAL: ifname=[en1~], IP=[63.87.254.144], PORT = 5060
215440.600197 ### NEW STATE: to: VC_SIGNALING, from: VC_IDLE
215440.600284 [ipAndPortData length] = 120
215440.600327 Length is valid: YES
215440.600453 CALLEE: ifname=[en0], IP=[17.202.32.37], wPort = 5060
215440.600482 CALLEE: ifname=[en0(IPv6)], IP=[fe80:0004:0000:0000:020d:93ff:fe31:0974], wPort = 5060
215440.600529 initiateConferenceCallUsingRemoteIPAndPortData
2006-06-07 21:54:40.620 iChat[390] IPAndPortList: <CFArray 0x43468d0 [0xa01c00e0]>{type = mutable-small, count = 1, values = (
0 : <CFDictionary 0x43e09c0 [0xa01c00e0]>{type = immutable, count = 2, capacity = 2, pairs = (
0 : <CFString 0x884a143c [0xa01c00e0]>{contents = "ip"} = <CFString 0x473baf0 [0xa01c00e0]>{contents = "17.202.32.37"}
1 : <CFString 0x884a1450 [0xa01c00e0]>{contents = "port"} = <CFNumber 0x472ddb0 [0xa01c00e0]>{value = +5060, type = kCFNumberSInt32Type}
215440.702047 Public mapping: 69.255.1.152:16384
215440.784335 Public mapping: 69.255.1.152:16385
215440.865201 Public mapping: 69.255.1.152:16386
215440.943920 Public mapping: 69.255.1.152:16387
215440.970158 * Caller SDP *
215440.971111 v=0
o=Jessica 0 0 IN IP4 %RTP-IP%
s=Jessica
c=IN IP4 %RTP-IP%
b=AS:2147483647
t=0 0
a=bandwidthDetection:YES
m=audio %ARTP-PORT% RTP/AVP 12 3 0
a=rtpmap:3 GSM/8000
a=rtpmap:0 PCMU/8000
a=rtpID:1546772002
m=video %VRTP-PORT% RTP/AVP 34
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:30
a=RTCP:AUDIO %ARTCP-PORT% VIDEO %VRTCP-PORT%
a=pogo
a=rtpID:1210691418
215440.971235 SIPConnect start...
215440.971653 TAInviteClientProc Thread start...
215440.971941 Send to 11CA2025:5060 [INVITE sip:[email protected] SIP/2.0
Via: SIP/2.0/UDP 69.255.1.152;branch=z9hG4bK760425e872f02772
Max-Forwards: 70
To: "iChat User" <sip:[email protected]>
From: "Jessica [email protected]" <sip:[email protected]>;tag=245967851
Call-ID: bfd166da-f691-11da-8578-f8cc0bcf13c4@192-168-1-111
CSeq: 1 INVITE
Contact: <sip:[email protected]>
User-Agent: Viceroy 1.1
Content-Type: application/sdp
Content-Length: 359
v=0
o=Jessica 0 0 IN IP4 69.255.1.152
s=Jessica
c=IN IP4 69.255.1.152
b=AS:2147483647
t=0 0
a=bandwidthDetection:YES
m=audio 16386 RTP/AVP 12 3 0
a=rtpmap:3 GSM/8000
a=rtpmap:0 PCMU/8000
a=rtpID:1546772002
m=video 16384 RTP/AVP 34
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:30
a=RTCP:AUDIO 16387 VIDEO 16385
a=pogo
a=rtpID:1210691418
215441.474587 Send to 11CA2025:5060 [INVITE sip:[email protected] SIP/2.0
Via: SIP/2.0/UDP 69.255.1.152;branch=z9hG4bK760425e872f02772
Max-Forwards: 70
To: "iChat User" <sip:[email protected]>
From: "Jessica [email protected]" <sip:[email protected]>;tag=245967851
Call-ID: bfd166da-f691-11da-8578-f8cc0bcf13c4@192-168-1-111
CSeq: 1 INVITE
Contact: <sip:[email protected]>
User-Agent: Viceroy 1.1
Content-Type: application/sdp
Content-Length: 359
v=0
o=Jessica 0 0 IN IP4 69.255.1.152
s=Jessica
c=IN IP4 69.255.1.152
b=AS:2147483647
t=0 0
a=bandwidthDetection:YES
m=audio 16386 RTP/AVP 12 3 0
a=rtpmap:3 GSM/8000
a=rtpmap:0 PCMU/8000
a=rtpID:1546772002
m=video 16384 RTP/AVP 34
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:30
a=RTCP:AUDIO 16387 VIDEO 16385
a=pogo
a=rtpID:1210691418
215442.475160 Send to 11CA2025:5060 [INVITE sip:[email protected] SIP/2.0
Via: SIP/2.0/UDP 69.255.1.152;branch=z9hG4bK760425e872f02772
Max-Forwards: 70
To: "iChat User" <sip:[email protected]>
From: "Jessica [email protected]" <sip:[email protected]>;tag=245967851
Call-ID: bfd166da-f691-11da-8578-f8cc0bcf13c4@192-168-1-111
CSeq: 1 INVITE
Contact: <sip:[email protected]>
User-Agent: Viceroy 1.1
Content-Type: application/sdp
Content-Length: 359
v=0
o=Jessica 0 0 IN IP4 69.255.1.152
s=Jessica
c=IN IP4 69.255.1.152
b=AS:2147483647
t=0 0
a=bandwidthDetection:YES
m=audio 16386 RTP/AVP 12 3 0
a=rtpmap:3 GSM/8000
a=rtpmap:0 PCMU/8000
a=rtpID:1546772002
m=video 16384 RTP/AVP 34
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:30
a=RTCP:AUDIO 16387 VIDEO 16385
a=pogo
a=rtpID:1210691418
215442.974519 Dialog(CREATED) Match(STATUS) [bfd166da-f691-11da-8578-f8cc0bcf13c4@192-168-1-111]=[bfd166da-f691-11da-8578-f 8cc0bcf13c4@192-168-1-111], [245967851]=[245967851]
215442.974615 TAInviteClientProc Thread end(800B0017)...
215442.974916 SIPConnect stop(900A0014)...
215442.974955 SIPManager connect returned 20
215442.976040 SIPCloseCall start...
215442.976087 (SIP.c:1295) Cannot find call ID(2)
215442.976174 Stop heartbeat
215442.976191 SIPCloseCall stop(800C0016)...
215442.976216 ### NEW STATE: to: VC_IDLE, from: VC_SIGNALING
215442.977021 SIPUpdateExternalInfo, force = 0
215442.977552 Sending SNATMAP heartbeat to 11FAF895:5678
215444.152791 UPnP address = 69.255.1.152
215445.354184 UPnP eport 5060 already mapped: retry next
215446.555668 UPnP eport 5061 already mapped: retry next
215447.765639 UPnP eport 5062 already mapped: retry next
215450.386237 UPnP SendSOAPMsg got no TCP response (0)
215450.386466 NAGetExternalMapping failed with error: -1
215450.386514 count of local IP's = 2
215450.386547 LOCAL: ifname=[external], IP=[69.255.1.152], PORT = 5060
215450.386566 LOCAL: ifname=[en1(IPv6)], IP=[fe80:0005:0000:0000:0211:24ff:fe95:be8e], PORT = 5060
215450.386597 LOCAL: ifname=[en1], IP=[192.168.1.111], PORT = 5060
215450.386617 LOCAL: ifname=[en1~], IP=[63.87.254.144], PORT = 5060
215450.386670 sendPing: 17.202.32.37:5060
215450.386749 Sending SNATMAP heartbeat to 11CA2025:5060
215500.542983 Stopped using preview buffer.
215500.543287 cancelPreview returned 0
thanks for all the help.
jessica

My firewire port works with ext hd but not with audio interface

2010 Imac 21.5 running 10.8.5. My firewire port works with ext hd but not with audio interface. The local authorized Apple tech said that I need a new motherboard, but my firewire ext drive works perfectly. I don't understand. Thanks.

You must go to the website of the audio interface manufacturer and look for, download and install updated drivers for the audio device you are using.
This is not, neccessarily, an Apple issue.

Every time I start Safari, uTube audio I was on last comes in loud and clear, but not the video. How can I stop this annoying overlap of sound? Thanks

Everytime I start Safari, uTube audio I was on lat time comes in loud and clear, but not the video. How do I stop the annoying overlap of sound? Thanks.

Try troubleshooting the Flash plug in...
Troubleshoot Flash Player | Mac OS

HT5517 I am using apple tv to connect slingbox to tv via iphone. I get the audio to the tv but not the video.

I am using apple tv to send slingbox picture from iphone to tv. I get the audio to the tv but not the video. What setting am I missing?
Thanks

Why is a slingbox needed?
Connect the ATV directly to the tv.
Keep in mind that all not all apps on iOS device allow sending of video via AirPlay to the ATV.
Also, AirPlay does not require or have anything to do with slingbox, it is entirely iDevice to ATV.

Magic Mouse One-Finger Swipe Works for one user but not the other

For the main account on my iMac, I can use a single finger swipe to move back and forward within Chrome. However the second user (also an administrator) cannot use this setting and must instead use the two finger swipe in settings. Both settings are identical but the Chrome browser wont recognize the single finger swipe for the second user. The gesture works fine in Safari, but not Chrome. Any suggestions?

my /etc/group:
root::0:root
bin::1:root,bin,daemon
daemon::2:root,bin,daemon
sys::3:root,bin
adm::4:root,daemon
tty::5:
disk::6:root
lp::7:daemon
mem::8:
kmem::9:
wheel::10:root,hans,ibm,gast
ftp::11:
mail::12:
uucp:x:14:
log::19:root
locate:x:21:
smmsp::25:
http::33:
games::50:
network:x:90:
video:x:91:
audio::92:ibm,gast
optical::93:hal
floppy:x:94:hal
storage:x:95:hal
scanner:x:96:
power:x:98:
nobody::99:
users::100:gast
dbus:x:81:
hans:x:1001:
vboxusers:x:108:hans
policykit:x:1002:
hal:x:82:
kvm:x:78:
nx:x:85:nx
avahi:x:84:
camera:x:97:
gdm:x:1003:
gast:x:1004:

Airplay works for one user but not for another on the same machine

I have the problem where airplay works for one user but not for another and both users are on the same machine. For the user where it does not work, everything appears normal, it's just that there is no sound being transmitted. I have tried restarting the Airport express, restarting iTunes, repairing disk permissions. Any ideas about what can be done to resolve this?

my /etc/group:
root::0:root
bin::1:root,bin,daemon
daemon::2:root,bin,daemon
sys::3:root,bin
adm::4:root,daemon
tty::5:
disk::6:root
lp::7:daemon
mem::8:
kmem::9:
wheel::10:root,hans,ibm,gast
ftp::11:
mail::12:
uucp:x:14:
log::19:root
locate:x:21:
smmsp::25:
http::33:
games::50:
network:x:90:
video:x:91:
audio::92:ibm,gast
optical::93:hal
floppy:x:94:hal
storage:x:95:hal
scanner:x:96:
power:x:98:
nobody::99:
users::100:gast
dbus:x:81:
hans:x:1001:
vboxusers:x:108:hans
policykit:x:1002:
hal:x:82:
kvm:x:78:
nx:x:85:nx
avahi:x:84:
camera:x:97:
gdm:x:1003:
gast:x:1004:

Isight works with photo booth but not in ichat or google talk or skype?

isight works with photo booth but not in ichat or google talk or skype?

Hi
Is this an Internal or External iSight ?
In iChat, in the Video Menu (This is to the right of Buddies and may read Audio) is Camera Enabled Ticked ?
If it reads Audio open the Connection Doctor from that same menu.
In the connection Doctor open the Capabilities tab
Does it say your Internet Connection is too slow ?
At this point I would need to know which iChat Version.
However also look in the View Menu.
Is Show VIdeo Status ticked ? (this shows green Icons next to your Buddy Pic and those of your Buddies
Next go to the iChat Menu > Preferences > Video Section
Do you see a preview here ?
Re: GoogleTalk
Have you enabled TALK on your Google Account Settings ?
You need to have a Google Mail ID (Not any other sort of Google ID)
Have you downloaded the Intel only Web Browser Plug-in to do Video in a Web Browser.
10:48 PM Tuesday; August 30, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

It works on my Computer, but not in my DVD Player

I burned a DVD, It works on my Computer, but not in my DVD Player...why?

still am trying to figure out how to burn at a slower speed, I see no optiond on iDVD.
You need to create a disk image out of iDVD, then burn. See below.
Suggest you create a disc image and then burn the DVD. File/Save as Disc Image...
http://docs.info.apple.com/article.html?path=iDVD/6.0/en/18.html
http://www.kenstone.net/fcphomepage/image_to_diskstone.html
This will isolate any encoding/burning issues you may encounter. Once the disc image is created, double-click the .img and burn the virtual disc that should appear on your desktop, using Toast to burn the DVD. Disk Utility to burn the .img file. Usually, you can select a burning speed in Disk Utility.
There are variations to this process based on which OS X you are using...
Open Disk Utility (in Utilities folder in Applications folder), click on the virtual disc (maybe the .img) in the left-hand window. Click the Burn icon. A new window should drop down and your SuperDrive tray will open after clicking the Burn icon. Insert a recordable DVD. (Verbatim DVD-R preferred by me.) Click the Close button. Wait. Select a burn speed. If you hold your mouse cursor over the pop-up it says: "Select a slower speed to work around burn failures," so select 4x or slower for best results. Then click the Burn button.
-->If the virtual disk selection won't allow you to click the Burn icon, use the .img file instead. This may have changed in 10.3.9 and did change in Tiger.
Also, you can use DVD Player to play the virtual disk to check your iDVD project before burning to DVD. Launch DVD Player. File/Open VIDEO_TS (Open DVD Media... in Player 4.6). Find the VIDEO_TS folder and open that. (The audio folder is for DVD-Audio disks.)
http://docs.info.apple.com/article.html?artnum=93006

I use Photoshop Elements 11 to print panoramas. Works for jpeg images but not tiff. Suggestions?

I use Photoshop Elements 11 to print panoramas. It works for jpeg images but not for tiff images. Seems strange because PSE11 manages tiff images in all other processes. Anyone fared better?

Thank you for your trouble.
My images are not usually layered and the particular case I am about to quote, it is not. The dimensions are 10,546 x 2,790 and the image has 16.7 mbs. I use 8 bit colour. When I set up the print screens for tiff, everything is normal until I get to the last screen with the image set upon the photo paper. Then the paper size indicated with the image refuses to budge from the A4 size, so the panorama gets printed on that. I consulted the Adobe chat line and the expert could 't get it to work either. So he came to the conclusion that the tiff capability had not been extended to printing panoramas. In seeking advice, I thought someone might refer me to an updating patch!
Well done! You have confounded the system! I could not find any control that would override the setting.

How do I troubleshoot installation/distribution of a LabVIEW .exe which processes data using Matlab when it works on some computers but not others?

I've been given the unenviable task of troubleshooting and installing/distributing software written by a former co-worker. I've modified the LabVIEW code and built an .exe file. I've successfully installed the Labview .exe file on several computers, but it won't work on some others. What's more baffling is that I installed it successfully on one computer, uninstalled it, and tried reinstalling it with no success. In fact, it's a new error (Dr. Watson for Windows NT application error). It doesn't help that I have different versions of LabVIEW and Matlab on the target computers. Some have LabVIEW 5.1, some
have 5.0, and some don't have it at all. Some have Matlab 5.2, some have 5.3 (R11) and some have 6.0 (R12). It's also not clear to me where the Matlab m files should be located. I'm not sure if it's a LabVIEW Runtime Engine problem, or if it's a Matlab problem. I've also wondered how LabVIEW and Matlab talk to each other. When LabVIEW calls Matlab, it seems that Matlab is running in the background. In other words, clicking on the Matlab Command Window and typing "whos" or any other command/variable doesn't work.

Jay del Rosario wrote:
>
> How do I troubleshoot installation/distribution of a LabVIEW .exe
> which processes data using Matlab when it works on some computers but
> not others?
Poke around zone.ni.com and
http://digital.natinst.com/public.nsf/$$Search/ .
Good luck, Mark

Site works in the app, but not in the browser.

Hello iWeb experts,
I've got problems.
Last night I published my site. And while it appears, and functions, properly in my iWeb app, it doesn't do the same in Safari, Firefox, and Internet Explorer.
Two issues...
FONTS
I chose Bellamie, Univers Condensed, and Marydale as my fonts. From reading these forums, I've discovered those won't wysiwyg on other computers if the fonts aren't available and open on them. So my two choices are to make every bit of text a graphic or to use a set of more universal fonts, correct? So my questions are...One, is there a list somewhere of fonts that will work in any browser? And, two, is there a short-cut, or easy way to transform type into a graphic without having to create image files?
FUNCTIONS
Here are the functions that work fine in iWeb but have gone haywire in all of the browsers I tested...
• The type in one nav link appears smaller than all the rest.
• Some links are active, others are not.
• Rollover highlighting works on some links, but not others.
• Most of the rollover links appear in the proper static color, a few do not.
I've tested these functions on three Macs, one PC, and in the three browsers mentioned above. All of them show the exact same problems. So something must be going wrong with iWebs coding, or my host server musn't like iWeb.
Any thoughts, suggestions on these two issues? Thanks much for any advice.
John
PS - For reference, see: www.johnrunk.com

Fascinating, Kirk (+he types with one raised eyebrow+).
QuickTimeKirk wrote:
When I drag across your page most of your links do not change. The "text" portion of them doesn't change, either. Something is covering them.
I can see that. But for the life of me, I don't know what could be covering those links. In my app, when I click in the area of the links, the type is the first item selected. Unless, possibly, it could somehow be the faint reflection of my black-and-white image (me & the ground I stand on). Hmmm...
QuickTimeKirk wrote:
Single click (outside the boundaries of your page contents) and an "outline" will appear. It shows the image file dimensions and locations.
This I don't see. An outline? As in "an object outline," or as in "a list of dimensions and locations?" When I click outside my page contents, I get nothing.
Thanks, QTK. I truly appreciate your troubleshooting here.
John

Audio works in audio chat, but not in video chats.

Similar Messages

Maybe you are looking for