AudioBeam - Confidence value for multiple directions

In the AudioBasics-D2D sample code, the Kinect is automatically setting the beam angle and then making available the selected angle and confidence value.
// Get audio beam angle and confidence
pAudioBeamSubFrame->get_BeamAngle(&fBeamAngle);
pAudioBeamSubFrame->get_BeamAngleConfidence(&fBeamAngleConfidence);
But I would like to get the BeamAngleConfidence for other directions besides the active beam angle so that I can choose a different direction manually if necessary. In order to choose the best direction (or sound source location), the Kinect must be calculating
those values for other directions [-50...50] and choosing the most likely. Does the API reveal those estimates?

I don't quite understand what you are asking. Beamforming focuses on the "strongest source" to detect where the sound is coming from. Setting it to automatic will provide beam direction and provide how confident it was in the guess. The stronger
the source and how noisy the area will be factors. From that you can deduce falloff for the other regions as demonstrated in the audio sample.
If you want to setup your own manual beams and get the values at the "same time", create different threads for each angle. This is qualified because Windows is not a real-time operating system. Depending on the speed of the CPU and how you
setup the threads will be factors you need to work with. With audio you have to worry about latency.
Carmine Sirignano - MSFT

Similar Messages

Standard Report to check consumption values for multiple materials

Hi,
Is there any standard report to check "consumption" values for multiple materials? The user needs to check the consumption values over a period of time for multiple materials (VERP, ROH) before deciding the re-order and safety stock values for them. Any help on this will be greatly appreciated.
Thanks,
Swapnil

Dear Swapnil,
Report MCRE is widely used for the material cosnumption than checking in COOIS.
Also these reports can help you.
MCPF                 Material analysis: Dates
MCPO                 Material analysis: Quantities
MCPW                 Material analysis: Lead time
Regards
Mangalraj.S

Multiple values for multiple fields sharing common id

I'm new to Reporting Services and I need to create report based on a common child id that includes multiple values from multiple fields in several tables. I can combine all the values into one query for a list report; however, this causes the rows to duplicate
multiple times based on the differing fields having multiple values (i.e. report contains various child ids and multiple medication dates/names, multiple health diagnoses with onset dates, multiple health service dates/values, multiple immunization types and
service dates, etc). If I create a list report and try to use various tables, I run into problems with how the tables view the data due to the duplicating child id rows from multiple field values on that child id. If I hide duplicates for these different tables,
I can run into spacing issues from the duplicating rows and/or hiding data that shouldn't be hid.
I need the report to have the basic non-duplicating child info (id, name, basic health info) and then also have various sections that contain fields with numerous values (i.e. section for health issue name and onset dates, section for medication name and
prescription dates, section for health service name and service date, etc). I would want a page break after each child id and would want all the child ids to be viewed/exported for printing purposes at the same time (i.e. not choosing one child id at
a time to print or view the data). I have tried to create one main table on a list report with various subreports on the child id; however, this is hard for my machine to process (it takes forever) and I can only view/export one child id at a time when I use
child id as the report parameter.
Any help you can give this newbie would be greatly appreciate.
Thanks,
Melissa S.
What's the best way for me to
MelissaS

Hi simpson213,
According to your description, you have some questions about your report design.
1. How to have non-duplicating child info?
In this scenario, since you don't want to hide the duplicate data, we suggest you filter the duplicated records on query level by using Distinct statement. If you want to do it on report level, you can group
records on chid id and use First() function on other fields.
Reference: First Function (Report Builder and SSRS)
2. How to have various sections that contain fields with numerous values?
We can also add these fileds into the child group of child and have them toggled by child id.
Reference: Add an Expand/Collapse Action to an Item (Report Builder and SSRS)
3. How to add a page break between each child?
Right click on the Row Group(child id)->Page Break->Select between each group instance.
Reference: Add a Page Break (Report Builder and SSRS)
4. How to select multiple child id when rendering report?
When creating parameter, select Allow multiple values in General.
Reference: Add, Change, or Delete a Report Parameter (Report Builder and SSRS)
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Setting property attribute values for multiple selected objects.

Hello,
Is there an easy way to set the attribute property values for more that one selected Table Operator Attribute (column) at a time. For example the target table has over 100 columns but I only want to INSERT/UPDATE 10 of those columns. The generated MERGE, INSERT and UPDATE statements will perform DML on all of the columns in the target table, setting the 90 columns with no mapping set to NULL. This is due to the Loading Properties 'Load Column when Updating Row' and 'Load Column when Inserting Row' both default to Yes. I would like to select multiple Attributes in the Table Operator and change the 'Load Column when Updating Row' and 'Load Column when Inserting Row' to No. This is similar to what you were able to do in Oracle Forms 9.0 Designer select multiple Items in a Block and change the properties en-masse.
Thanks

Hi,
Using OMB scripting to set attribute properties in a data mapping sort of defeats the purpose of utilizing a graphical user interface to define and set properties for a data mapping? Surely the GUI data mapping tool was created to get away from writing scripts and scripting would also require that you know the name of the data mapping, table operator and the set of attribute names for which you have to write one line of script to set each property value, i.e. 90 lines to set 90 attribute values.
Cheers,
Phil

Display values for multiple selection

In the code below, I am trying to display multiple values for Drop down list. when i run the code below the value "AA" is only selected on the screen but not BB.
I want to display both AA and BB selected.
Please any help/suggestions:
<%@ page import="java.util.*"%>
<jsp:useBean id="ab" class="com.a.b" scope="session"/>
<select name="lstTyp" multiple>
<%
String Type[]= ab.getTyp();/*(VALUES ARE "AA-AA,BB-BB,CC-CC,DD-DD")*/
String choiceType;
String getTyp1 = "AA,BB";
String getTyp = "";
StringTokenizer parser = new StringTokenizer(getTyp1,",",false);
          int numTokens = parser.countTokens();
          for(int j = 0; j <numTokens; j++)
               getTyp = parser.nextToken();
               for(int i=0; i<Type.length; i++)
               {   choiceType = Type[i].substring(3);
                    if( getTyp.equalsIgnoreCase(Type.substring(0,2)) )
                         out.println("<option value=\"" + Type[i].substring(0,2) + "\" SELECTED >"+ choiceType );
                    else
                         out.println("<option value=\"" + Type[i].substring(0,2) + "\">"+ choiceType );
               System.out.println(getTyp);
%>
</select>

<select name="lstTyp" size="5" multiple>

Customer Exit Variable in formula to get values for multiple keyfigures

Hi to all,
I have query as defined in following scenario:
CHAR_X     C_KF1 (based on KF1)     C_KF2 (based on KF2)     u2026     C_KFn (based on KFn)
Value1
Value2
u2026
Valuem
C_KF = calculated key figure
I need to create a customer exit variable that will search through selection e.g. CHAR_X/KF1 and give some result. I need this variable for every keyfigure (KF1-KFn). Using customer exit variable is the only solution.
My question is: do I have to create formula variable (customer exit) representing every keyfigure separately (VAR1 u2013 VARn, like in below example)?
CHAR_X     C_KF1 (using VAR1)     C_KF2 (using VAR2)     u2026     C_KFn (using VARn)
Value1
Value2
u2026
Valuem
Or is it possible to create one general formula variable since the way to retrieve the value in variable is always the same (like in below example)? In this case, how do I pass the value of the respective keyfigure to this variable?
CHAR_X     C_KF1 (using VAR_X)     C_KF2 (using VAR_X)     u2026     C_KFn (using VAR_X)
Value1
Value2
u2026
Valuem
Thanks for your replies, points will be awarded!
Cheers

That is my concern, the value of variable is not the same.
What variable should do is:
take KF1 id, go through values for CHAR_X, get back one value
This value would always be different, and also "KF" part in code of variable should be different, based on the column where the variable is being used (so, in column C_KF1 ,variable should "pick up" id of KF1, etc.).
I hope it makes it more clear. For now, I do not have the code for variable yet, I am just interested in concept whether it is possible to pass the ID of keyfigure dynamically so I can make decision how to model this request.
Thanks

SRM 7 - defaulting values for multiple line items on shopping cart

Hi,
We are using SRM 7 - Employee self service - Punch out catalogues and describe requirements.
Our scenario is this:
- User is responsible for creating shopping carts for numerous cost centres/other users
- Shopping cart will have multiple line items (but the cost centre/other user will be same for all line items)
- Is it possible to define in a shopping cart that all line items will have a specific value? E.g. all line items will be assigned to a specific cost centre?
I know about assigning dedault values in PPOMA_BBP - but our situation is where user does not want to use this default value this time, but another value
Any suggestions?
Thanks

Thanks Alex for quick reply
To confirm, did you use the BBP_DOC_CHECK_BADI (in conjunction with the BBP_ITEM_CHECK_BADI) to look at different cost centres on the multiple lines on the shopping cart?
Also - did you use the same BADI to give user opportunity to enter a default cost centre that is then automatically applied to all line items on the cart?
Thanks
Azam

SSRS (Report Builder 3.0) Showing all values for Multiple Line field with Append Changes

I have a simple SharePoint list with a multiple line column that has append changes enabled. I am doing a report with Report Builder 3.0 and I want to show all values of the field the same way you achieve it through a DVWP using:<SharePoint:AppendOnlyHistory
FieldName="Comments" runat="server"
ControlMode="Display" ItemId="{@ID}"/>
Any suggestions to show all the appended values?

Hi,
I am trying to involve someone familiar with this topic to further look at this issue.
Regards,
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Rebecca Tu
TechNet Community Support

Showing all values for Multiple Line field with Append Changes

I have a simple SharePoint list with a multiple line column that has append changes enabled. I am doing a report with Report Builder 3.0 and I want to show all values of the field the same way you achieve it through a DVWP using:<SharePoint:AppendOnlyHistory
FieldName="Comments" runat="server"
ControlMode="Display" ItemId="{@ID}"/>
For reference, I'm trying to replicate this function, but on a report:
http://sympmarc.com/2011/02/07/showing-all-versions-of-append-changes-to-existing-text-in-a-data-view-web-part-dvwp/
Any suggestions to show all the appended values in a report?

Hi Lewis75581,
According to your description, you want to show the append changes history of a column in Reporting Services. Right?
In Reporting Services, we don't have a feature to show the change history of a column. However, we can have workaround on SQL level. In SQL Server, we have tables: inserted table and deleted table which contains the recently inserted and deleted records.
In this scenario, we can create a trigger in your database. Once you insert rows into the table, it will be triggered and get those inserted rows. Then insert those rows into another table. Now we can create one more dataset based on this table and display
these inserted rows in our report. This might be the most effective workaround for your requirement. Please refer to a similar thread below:
http://social.technet.microsoft.com/Forums/en-US/dacfb141-a976-489a-acca-789ba90e15de/ssrs-multiple-reports-with-different-parameteres-in-single-window?forum=sqlreportingservices
Reference:
Use the inserted and deleted Tables
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Why does getdate() function return same time value for multiple select statements executed sequentially

When I run the following code
set nocount on
declare @i table(id int identity(1,1) primary key, sDate datetime)
while((select count(*) from @i)<10000)
begin
insert into @i(sDate) select getdate()
end
select top 5 sDate, count(id) selectCalls
from @i
group by sDate
order by count(id) desc
I get the following results.
sDate selectCalls
2014-07-30 14:50:27.510 406
2014-07-30 14:50:27.527 274
2014-07-30 14:50:27.540 219
2014-07-30 14:50:27.557 195
2014-07-30 14:50:27.573 170
As you can see the select getdate() function returned same time up to the milisecon 406 time for the first date value. This started happening when we moved our applications to a faster server with four processors. Is this correct or am I
going crazy?
Please let me know
Bilal

Observe that adding 2 ms is accurate only with datetime2. As noted above, datetime does not have ms resolution:
set nocount on
declare @d datetime, @i int, @d2 datetime2
select @d = getdate(), @i = 0, @d2 = sysdatetime()
while(@i<10)
begin
select @d2, @d, current_timestamp, getdate(), sysdatetime()
select @d = dateadd(ms,2,@d), @i = @i+1, @d2=dateadd(ms,2,@d2)
end
2014-08-09 08:36:11.1700395 2014-08-09 08:36:11.170 2014-08-09 08:36:11.170 2014-08-09 08:36:11.170 2014-08-09 08:36:11.1700395
2014-08-09 08:36:11.1720395 2014-08-09 08:36:11.173 2014-08-09 08:36:11.170 2014-08-09 08:36:11.170 2014-08-09 08:36:11.1700395
2014-08-09 08:36:11.1740395 2014-08-09 08:36:11.177 2014-08-09 08:36:11.170 2014-08-09 08:36:11.170 2014-08-09 08:36:11.1700395
2014-08-09 08:36:11.1760395 2014-08-09 08:36:11.180 2014-08-09 08:36:11.170 2014-08-09 08:36:11.170 2014-08-09 08:36:11.1700395
2014-08-09 08:36:11.1780395 2014-08-09 08:36:11.183 2014-08-09 08:36:11.170 2014-08-09 08:36:11.170 2014-08-09 08:36:11.1700395
2014-08-09 08:36:11.1800395 2014-08-09 08:36:11.187 2014-08-09 08:36:11.170 2014-08-09 08:36:11.170 2014-08-09 08:36:11.1700395
DATE/TIME functions:
http://www.sqlusa.com/bestpractices/datetimeconversion/
Kalman Toth Database & OLAP Architect
SQL Server 2014 Design & Programming
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

Same sequence value for multiple targets

Hello
In my mapping, I have 4 target tables. The primary key of the first table is filled by a sequence. Now I should use the same value to fill in the 3 other tables.
I was trying to use the sequence in the joiner and in the splitter but when I validate the mapping, I get the following error:
"VLD-1800: Illegal use of sequence operator(s) in a complex mapping."
How do I resolve this problem?
Thank you for your answer.

Hi
A possible solution for your problem would be to populate your main table (Main_TL) with everything including the Sequence Number and have your other target a temporary table (Temp_TL) which has a common column (Natural Key) populated.
Do another mapping joining the Main_TL and the temporary table (Temp_TL) using the Natural key joining condition and populate the remaining 3 targets to the output of the join.
Hope this helps.
Cheers,
Sharad

How do I return a true value for multiple expressions?

Hi, I hope this question makes sense...
In, for example, cell A1, I would like to return a True value when:
C1>B1, and
C2>B2, and
C3>B3, and
C4>B4, and
C5>B5
That is, if all column C values are greater than all corresponding column B values, then I would like to return a True value in cell A1.
If one or more C values are less than or equal to their corresponding B values, e.g. B4<=C4, then I would like to return a False value in cell A1.
Can this be achieved using a single formula in cell A1? If so what would that formula be?
Thanks

In column D I will insert the formula:
=IF(OR(ISBLANK(B),ISBLANK(C)),"",IF(C>B,"",1))
In A1 I will insert:
=SUM(D)<0
or
in column D
=IF(OR(ISBLANK(B),ISBLANK(C)),"",C>B)
in A1
=COUNTIF(D,FALSE)=0
Yvan KOENIG (from FRANCE mardi 2 septembre 2008 12:11:28)

Enter multiple values for a field in dialog programming

I need to enter multiple values for some of the fields in screen , which screen element do i use for this or is there any other way of doing it?

That would be a table control. In this you can enter multiple values for multiple fields.
http://help.sap.com/saphelp_nw04/helpdata/en/9f/dbac5e35c111d1829f0000e829fbfe/content.htm
Thanks,
SKJ

Select MULTIPLE default values for a multiple selection list box based on another field in Infopath 2010

Hello there - Before I explain my issue, I would like to point out that I have reviewed some other discussions on selecting default values for multiple selection listbox. But my issue is specific and different, and not answered by any of the discussions
I visited.
I have a multiple selection list box (say for example all countries in the world as values), and I would like to pre-select or setup multiple default values (say five countries) based on some criteria that I query from MS SQL database table.
I know we can go to Data | Default Values option to setup one or many default values for multiple selection list box. When I enter the default values manually this works. I also right click the field under the Multiple-Selection List Box group, then select
Add another Value Below and set the Default Value for this field to setup multiple default values.
However, if I reference a field (either an infopath field or a field from SQL database) I am not able to setup multiple default values. Infopath automatically selects the last field I selected for all instances and in the end I am able to see only one
default value selected instead of many. How to fix this problem? Why would infopath allow multiple default values when we enter it manually but not when we reference some fields?
Please let me know if you need more info. Appreciate your help.
Thanks!

Hi redhotc,
According to your description, my understanding is that you want to set multiple default values for a multiple checkbox list in InfoPath form.
I did a test with SQL database table. I set three default values for the checkbox list by adding three values field under the group field(Data->Default values), each value field is for a default value. Then publish it to my SharePoint site, everything
was fine.Please have a try as the below link:
http://www.bizsupportonline.net/infopath2010/pre-select-items-multiple-selection-list-box-infopath-2010.htm
Note: if you are using SQL databse table, you may need to enable ‘Allow cross-domain data access for user form templates that use connection settings in a data connection file’ in CA. More information, please refer to:
http://answers.flyppdevportal.com/categories/sharepoint2010/sharepoint2010customization.aspx?ID=418b9423-a96c-4e5e-91f9-6a1b010ebb69
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Selection-screen - add default value to multiple selection

Hi,
How I can add a default value for multiple selection, on a Select-options?
Thanks in advance,
Brian Gonsales

By default, selection optoins are RANGES, therefore to fill these before display, in the INITIALIZATION section
CLEAR: so_field, so_field[].
so_field = 'IEQvalue'. append so_field.
so_field = 'IEQvalue2'. append so_field.
so_field = 'IEQvalue3'. append so_field.
If you want ranges
CLEAR: so_field, so_field[].
so_field = 'IBT'. so_field-low = 'lowvalue'. so_field-high = 'highvalue' append so_field.
* ETC
Edited by: Paul Chapman on May 15, 2008 9:30 AM

AudioBeam - Confidence value for multiple directions

Similar Messages

Maybe you are looking for