Same sequence value for multiple targets

Hello
In my mapping, I have 4 target tables. The primary key of the first table is filled by a sequence. Now I should use the same value to fill in the 3 other tables.
I was trying to use the sequence in the joiner and in the splitter but when I validate the mapping, I get the following error:
"VLD-1800: Illegal use of sequence operator(s) in a complex mapping."
How do I resolve this problem?
Thank you for your answer.

Hi
A possible solution for your problem would be to populate your main table (Main_TL) with everything including the Sequence Number and have your other target a temporary table (Temp_TL) which has a common column (Natural Key) populated.
Do another mapping joining the Main_TL and the temporary table (Temp_TL) using the Natural key joining condition and populate the remaining 3 targets to the output of the join.
Hope this helps.
Cheers,
Sharad

Similar Messages

Why does getdate() function return same time value for multiple select statements executed sequentially

When I run the following code
set nocount on
declare @i table(id int identity(1,1) primary key, sDate datetime)
while((select count(*) from @i)<10000)
begin
insert into @i(sDate) select getdate()
end
select top 5 sDate, count(id) selectCalls
from @i
group by sDate
order by count(id) desc
I get the following results.
sDate selectCalls
2014-07-30 14:50:27.510 406
2014-07-30 14:50:27.527 274
2014-07-30 14:50:27.540 219
2014-07-30 14:50:27.557 195
2014-07-30 14:50:27.573 170
As you can see the select getdate() function returned same time up to the milisecon 406 time for the first date value. This started happening when we moved our applications to a faster server with four processors. Is this correct or am I
going crazy?
Please let me know
Bilal

Observe that adding 2 ms is accurate only with datetime2. As noted above, datetime does not have ms resolution:
set nocount on
declare @d datetime, @i int, @d2 datetime2
select @d = getdate(), @i = 0, @d2 = sysdatetime()
while(@i<10)
begin
select @d2, @d, current_timestamp, getdate(), sysdatetime()
select @d = dateadd(ms,2,@d), @i = @i+1, @d2=dateadd(ms,2,@d2)
end
2014-08-09 08:36:11.1700395 2014-08-09 08:36:11.170 2014-08-09 08:36:11.170 2014-08-09 08:36:11.170 2014-08-09 08:36:11.1700395
2014-08-09 08:36:11.1720395 2014-08-09 08:36:11.173 2014-08-09 08:36:11.170 2014-08-09 08:36:11.170 2014-08-09 08:36:11.1700395
2014-08-09 08:36:11.1740395 2014-08-09 08:36:11.177 2014-08-09 08:36:11.170 2014-08-09 08:36:11.170 2014-08-09 08:36:11.1700395
2014-08-09 08:36:11.1760395 2014-08-09 08:36:11.180 2014-08-09 08:36:11.170 2014-08-09 08:36:11.170 2014-08-09 08:36:11.1700395
2014-08-09 08:36:11.1780395 2014-08-09 08:36:11.183 2014-08-09 08:36:11.170 2014-08-09 08:36:11.170 2014-08-09 08:36:11.1700395
2014-08-09 08:36:11.1800395 2014-08-09 08:36:11.187 2014-08-09 08:36:11.170 2014-08-09 08:36:11.170 2014-08-09 08:36:11.1700395
DATE/TIME functions:
http://www.sqlusa.com/bestpractices/datetimeconversion/
Kalman Toth Database & OLAP Architect
SQL Server 2014 Design & Programming
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

How to use the same POWL query for multiple users

Hello,
I have defined a POWL query which executes properly. But if I map the same POWL query to 2 portal users and the 2 portal users try to access the same page simultaneously then it gives an error message to one of the users that
"Query 'ABC' is already open in another session."
where 'ABC' is the query name.
Can you please tell me how to use the same POWL query for multiple users ?
A fast reply would be highly appreciated.
Thanks and Regards,
Sandhya

Batch processing usually involves using actions you have recorded. In Action you can insert Path that can be used during processing documents. Path have some size so you may want to only process document that have the same size. Look in the Actions Palette fly-out menu for insert path. It inserts|records the current document work path into the action being worked on and when the action is played it inserts the path into the document as the current work path..

Same apple id for multiple devices

I have been use the same apple id for multiple devices (both are iPhones running iOS 6 - one is a 4, the other a 4S.) I'd like to sync separate content for each device using the same instance of iTunes (iTunes V 10.7 installed on MacBook running OS X 10.6.8.) Can I assign the second device a separate apple id in odrer to differentiate the content? Thanks for your assistance!

No, a second Apple ID will not work. iTunes can already tell them apart.
When you connect the first iPhone to iTunes, check and uncheck the things you want and Sync.
Do the same with the second iPhone.

Standard Report to check consumption values for multiple materials

Hi,
Is there any standard report to check "consumption" values for multiple materials? The user needs to check the consumption values over a period of time for multiple materials (VERP, ROH) before deciding the re-order and safety stock values for them. Any help on this will be greatly appreciated.
Thanks,
Swapnil

Dear Swapnil,
Report MCRE is widely used for the material cosnumption than checking in COOIS.
Also these reports can help you.
MCPF                 Material analysis: Dates
MCPO                 Material analysis: Quantities
MCPW                 Material analysis: Lead time
Regards
Mangalraj.S

Can I use the same Apple ID for multiple devices

Can I use the same Apple ID for multiple devices?

Yes. Up to five devices can be authorized on a single computer using the same Apple ID. You can also use the same Apple ID on multiple devices is they are all going to use the same iTunes Library by the same user. But it's ill-advised if multiple users are involved who wish to keep their devices separate from the devices belonging to other users.
How to use multiple iPhone, iPad, or iPod devices with one computer
Using More than One iDevice on the Same Computer
This applies mainly to couples who are adding another device and do not want their email, messages, etc. being duplicated on both devices. To begin read: How to use multiple iPhone, iPad, or iPod devices with one computer. You need to establish a separate Apple ID and password for whomever will use the new iDevice. See Apple - My Apple ID and Frequently asked questions about Apple ID. The easiest way is to do this on the computer using iTunes: iTunes- How to set up an Apple ID within iTunes.
On the computer create a new user account for the person with the new iDevice. This will be the user account that person will always use. He/She will no longer use the other user account. This way that person will have a separate iTunes Library
Start by transferring the new device(s) to a new account along with all your data. Save any photo stream photos that you want to keep to your camera roll (unless they are already in the camera roll) by opening your Photos app, tap on Albums icon at the bottom. Now, tap on My Photo Stream album; tap Select; tap on the photos you want to select;, tap the share icon (box with upward facing arrow) in the lower left corner; then tap Save to Camera Roll.
If you are syncing notes with iCloud that you want to keep then you need to open each of your notes and email them to yourself. Later you can copy and paste the text into new notes created in your new account.
Tap on Settings > iCloud > Delete Account (only deletes it from this device, not from iCloud; the person keeping the current account will not be affected,) provide the password to turn off Find My Phone and choose Keep on My iDevice when prompted. Sign in with a different Apple ID to create your new account. Choose Merge to upload your data.
Once you are on separate accounts, you can each go to icloud.com and delete the other person's data from your account.
Note: The essence of the above was created by user, randers4. I
have made substantial changes to improve readability and syntax.

Can I use the same email address for multiple seats in Creative Cloud for Teams?

Can I use the same email address for multiple seats in Creative Cloud for Teams?

No. http://www.adobe.com/products/creativecloud/faq.html
Can I buy more than one membership to an individual offering of Creative Cloud?
No, Adobe has moved to identity-based licensing with a technology that will not support multiple same-product licenses, so you can buy only one membership per Adobe ID. If you need two Creative Cloud memberships, you will need to purchase each with a unique Adobe ID. You can also purchase a Creative Cloud for teams membership, which allows you to purchase and manage multiple seats under one account.

How to execute a same sequence number for the resulting dynamic rows

Hi friends,
I have a sequence and trigger(which will fire id for each and every row insert).
My scenario is, If i update more than 5 rows at a time means, i need to set a same sequence number example(1) for all the 5 rows.
Next time, if i update another 5 rows means, then i need to set a same sequence number (i.e) 2 for the next 5 rows.
So, my updation will be dynamic(may be 2 ,5, 10 rows at a time), But i need to set a same sequence number for one of the column for all the rows that i update.
Next time, if i update another set of rows means, then i need to set only the next sequence number(i.e) 2(assume that previously updated sequence for the before set of rows is 1) for another set of rows.
Like that sequence has to update in a sequential manner for more than one set of rows in that column.
How to achieve it friends.
example
id-----------------name
1-------------------A
1-------------------B
1-------------------C
1-------------------D
1-------------------E
2-------------------D
2-------------------E
2-------------------F
2-------------------G
3-------------------H
3-------------------IBrgds,
Mini

Hi,
You forgot to mention your version.
If you want a trigger based solution, then in 10g you need two triggers
1. A statement level trigger that takes sequence.nextval into a dummy variable that will not be used.
2. A for each row trigger that uses sequence.currval.
In 11g you should be able to write a single, composite trigger.
If you want a solution with no triggers, it could look something like
SQL> create sequence s start with 10;
Sequence created.
SQL>
SQL> create or replace function s_wrapped
2 return number
3 as
4     v number;
5 begin
6     select s.nextval
7     into v
8     from dual;
9
10     return v;
11 end s_wrapped;
12 /
Function created.
SQL> create table tab1 as (Select level x, cast(null as number) y from dual connect by level <= 5);
Table created.
SQL> update tab1
2    set y = (select s_wrapped from dual)
3   where x <= 3;
3 rows updated.
SQL> commit
2 /
Commit complete.
SQL> select *from tab1
2 /
       X          Y
       1         10
       2         10
       3         10
       4
       5
SQL>Regards
Peter

How to use the same variable value for data entry and the planning sequence

Hi,
the scenario is the following:
Using the WAD template a user enters cost center plan data. The cost center is selected by the chosen value for the variable "V1".
Afterwards he shall push a button which starts a planning sequence (including saving the data and further functions). This planning sequence uses a filter that also contains the variable "V1".
What or where has it to be defined that the planning sequence uses automatically the same value for the variable "V1" as selected for the data entry?

You have to define in the planning function. The planning sequence is only a sequence and it read the planning functions underneath it.
Ravi Thothadri

Export Limits for Multiple Sequences in the Same Sequence File for TS3.0

Hi,
I am using TestStand 3.0 to a test application. Because we want to have our limits in a csv-file I have tried to use the Import/Export tools in TS. But this application only supports to export limits for the selected sequence (e.g. main, or subseq1) at a time. This makes it a pretty hard job to export limits from 30 test sequences. What I need is a possibility to export my limits from �all sequences� in my seq-file.
I have found an article on NI Dev. Zone about �Export Limits for Multiple Sequences in the Same Sequence File (TestStand 1.0.x)�.
http://sine.ni.com/apps/we/niepd_web_display.DISPLAY_EPD4?p_guid=B45EACE3D9CB56A4E034080020E74861&p_node=DZ52236&p_submitted=N&p_rank=&p_answer=&p_sourc
e=External
I have tried to use this code but because it�s for TS 1.0.2 the limits from my multi num test step and my custom steptypes isn�t exported. So that doesn�t fulfill my needs.
Is there an updated version with �all sequences� added to TS 3.0? Is there other good solutions to my problem out there?
Best Regards,
Morten Pedersen
CIM Industrial Systems A/S
Denmark

Hi David Mc,
Thanks for your reply. I have already considered this solution because the source code is added in the folder described in your reply. But that is not a good solution. It will cost me a lot of time to establish the toolchain, reverse engineer the source code, make the implementations and build a new dll (most off these is already knowledge by NI). And when NI make future releases of TestStand I have some merge work to do every time NI have made some changes in the files I have changed.
But as I write above: I have hoped that NI already has/or could made a solution like the one to 1.0.2 (see link in root) to me. And then they could include it in the next version.
I don't think I am the only one in the TestStand world that ne
ed this feature.
Best regards,
Morten Pedersen
CIM Industrial Systems A/S
Denmark

Using a single sequence value over multiple scripts (in a variable?)

Hi all...
I'm writing a number of scripts that insert rows into tables.
To better explain my point, I'll paste a simple breakdown of the scripts here as that will be easier to understand...
Script 1:
INSERT INTO WORKGROUP_DEPARTMENTS(ID, DEPT_NAME, DEPT_TYPE)
VALUES (SEQ_WGDPT.NEXTVAL, 'Staff', 3);
Script 2:
INSERT INTO WORKGROUP_SECTIONS(ID, SECT_NAME, WGDPT_ID)
VALUES (SEQ_WGSEC.NEXTVAL, 'Staff 1',
(SELECT ID FROM WORKGROUP_DEPARTMENTS
WHERE DEPT_NAME = 'Staff'
AND DEPT_TYPE = '3')
Script 3:
INSERT INTO WORKGROUPS(NAME, UNIT_TYPE, WGSEC_ID)
VALUES ('Staff Room', 3,
(SELECT ID FROM WORKGROUP_SECTIONS
WHERE SECT_NAME = 'Staff 1')
As you can see, in scripts 1 and 2 a new value is produced from a sequence (SEQ_WGDPT & SEQ_WGSEC respectively). Then, in scripts 2 & 3 (respectively) these values are inserted into another table.
What I'm trying to figure out is: can I do the same thing here without having to include the horrible SELECT statements in scripts 2 & 3 in order to find the ID, which was produced by the sequence in the previous script?
Unfortunately they do have to be separate scripts, and as such I can't call Sequence.CurrVal from a different script as other users may have used the sequence since it was used initially in the previous script. I could call it from the original calling script, and save it intop a variable, but I have no idea how to - even if it is the right idea!
I tried to insert the sequence value into a variable a la PL/SQL so that I could call this variable from the next script, but failed miserably as I'm rubbish!
Any help would be great. Thanks.

You can use PL/SQL, for example:
SQL> desc t
Name                                      Null?    Type
ID                                                 NUMBER
NAME                                               VARCHAR2(10)
SQL> desc t1
Name                                      Null?    Type
ID                                                 NUMBER
NAME                                               VARCHAR2(10)
ID1                                                NUMBER
SQL> desc t2
Name                                      Null?    Type
ID                                                 NUMBER
NAME                                               VARCHAR2(10)
ID2                                                NUMBER
SQL> create sequence seq_1;
Sequence created.
SQL> declare
2   prev_id number;
3 begin
4   insert into t values(seq_1.nextval,'A')
5   returning id into prev_id;
6   insert into t1 values(seq_1.nextval,'B',prev_id)
7   returning id into prev_id;
8   insert into t2 values(seq_1.nextval,'C',prev_id);
9 end;
10 /
PL/SQL procedure successfully completed.
SQL> select * from t;
        ID NAME
         1 A
SQL> select * from t1;
        ID NAME              ID1
         2 B                   1
SQL> select * from t2;
        ID NAME              ID2
         3 C                   2
Rgds

Multiple values for multiple fields sharing common id

I'm new to Reporting Services and I need to create report based on a common child id that includes multiple values from multiple fields in several tables. I can combine all the values into one query for a list report; however, this causes the rows to duplicate
multiple times based on the differing fields having multiple values (i.e. report contains various child ids and multiple medication dates/names, multiple health diagnoses with onset dates, multiple health service dates/values, multiple immunization types and
service dates, etc). If I create a list report and try to use various tables, I run into problems with how the tables view the data due to the duplicating child id rows from multiple field values on that child id. If I hide duplicates for these different tables,
I can run into spacing issues from the duplicating rows and/or hiding data that shouldn't be hid.
I need the report to have the basic non-duplicating child info (id, name, basic health info) and then also have various sections that contain fields with numerous values (i.e. section for health issue name and onset dates, section for medication name and
prescription dates, section for health service name and service date, etc). I would want a page break after each child id and would want all the child ids to be viewed/exported for printing purposes at the same time (i.e. not choosing one child id at
a time to print or view the data). I have tried to create one main table on a list report with various subreports on the child id; however, this is hard for my machine to process (it takes forever) and I can only view/export one child id at a time when I use
child id as the report parameter.
Any help you can give this newbie would be greatly appreciate.
Thanks,
Melissa S.
What's the best way for me to
MelissaS

Hi simpson213,
According to your description, you have some questions about your report design.
1. How to have non-duplicating child info?
In this scenario, since you don't want to hide the duplicate data, we suggest you filter the duplicated records on query level by using Distinct statement. If you want to do it on report level, you can group
records on chid id and use First() function on other fields.
Reference: First Function (Report Builder and SSRS)
2. How to have various sections that contain fields with numerous values?
We can also add these fileds into the child group of child and have them toggled by child id.
Reference: Add an Expand/Collapse Action to an Item (Report Builder and SSRS)
3. How to add a page break between each child?
Right click on the Row Group(child id)->Page Break->Select between each group instance.
Reference: Add a Page Break (Report Builder and SSRS)
4. How to select multiple child id when rendering report?
When creating parameter, select Allow multiple values in General.
Reference: Add, Change, or Delete a Report Parameter (Report Builder and SSRS)
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Setting property attribute values for multiple selected objects.

Hello,
Is there an easy way to set the attribute property values for more that one selected Table Operator Attribute (column) at a time. For example the target table has over 100 columns but I only want to INSERT/UPDATE 10 of those columns. The generated MERGE, INSERT and UPDATE statements will perform DML on all of the columns in the target table, setting the 90 columns with no mapping set to NULL. This is due to the Loading Properties 'Load Column when Updating Row' and 'Load Column when Inserting Row' both default to Yes. I would like to select multiple Attributes in the Table Operator and change the 'Load Column when Updating Row' and 'Load Column when Inserting Row' to No. This is similar to what you were able to do in Oracle Forms 9.0 Designer select multiple Items in a Block and change the properties en-masse.
Thanks

Hi,
Using OMB scripting to set attribute properties in a data mapping sort of defeats the purpose of utilizing a graphical user interface to define and set properties for a data mapping? Surely the GUI data mapping tool was created to get away from writing scripts and scripting would also require that you know the name of the data mapping, table operator and the set of attribute names for which you have to write one line of script to set each property value, i.e. 90 lines to set 90 attribute values.
Cheers,
Phil

Message-Mapping: Use same RFC lookup for different target fields

Hello,
I need to apply an RFC Lookup which delivers a boolean flag back (true or false). This RFC lookup should be used for different target fields.
Is there a way to execute the RFC lookup just once and then store the result in an internediate variable that I can use for all futher checks for different target fields?
If this is not possible and I have to apply the RFC lookup for all necessary target fields is it then executed for each target field ? This is exactly what I want to avoid in order not to slow down performance.
The input parameter (=source field value) would be the same.
Thank you for your advice!

Exactly.
Here is a UDF example I have that you could adapt to your needs.
Set
public String setCounter(String a,String b,Container container){
/* Store values in global datacontainer
a: mapping value and return valueparameter
b: name for stored value parameter
GlobalContainer myGlobalContainer;
myGlobalContainer = container.getGlobalContainer();
myGlobalContainer.setParameter(b.toUpperCase(), a);
return a;
Get
public String getCounter(String a,Container container){
//write your code here
GlobalContainer gc = container.getGlobalContainer();
if (gc.getParameter(a) != null) {
return String.valueOf(gc.getParameter(a));
} else {
return "1";

Single hierarchy for multiple target systems

Hi,
I have a version named "Account" with a hierarchy named as "Acc2013".
the hierarchy "Acc2013" is same across Oracle EBS, Oracle Fusion GL, and HFM.
how can i assign multiple node types to the same hierarchy so that i just need to maintain one hierarchy (this case account hierarchy) and select the properties pertaining to each target system?
i.e. i select the Oracle GL from the drop down and give the details for the Oracle GL then i select the HFM category from the drop down and provide the HFM related properties.
the reason why i am asking is, if i dont give the node type, all the unnecessary properties are showing up for other type of hierarchies. for e.g. there is another hierarhcy named cost center there its showing the account related properties.
to summarize, how i can utilize a single hierarchy to be used for different target systems? Appreciate your help. do i need to create different version and hierarchy for different types of target systems?

I'm late to respond to this, but I always preach to customers that it is critical for DRM to act as an enterprise view. This isn't a "System A" hierarchy, or a "System B" hierarchy, but rather it's an asset that is shared by both systems, and therefore attributes for both systems are valid. Since node types provide the ability to hide properties, many interesting options present themselves, not all of which lead to a good outcome in the longer term. If a user doesn't ever want to see properties for a particular system, it would be better to just remove their access to that property category in many cases. (They may already have read only access but they object to "being bothered" with seeing those properties.)
I've seen many DRM implementations head down the other path and end up with duplicate maintenance requirements, configuration challenges, or even having to do major reengineering efforts to transition DRM from a Finance department tool into an enterprise use case feeding a data warehouse. A current customer of mine used a scheme where a checkbox on each property category would make the properties disappear if unchecked...this worked great with a handful of node types, but unfortunately the number of node types needed to support all of these property category combinations was bound by factorial math principles. Consequently the maintenance for this solution went from unweildy to unmanageable as more "non-HFM" data was added to DRM.
DRM implementations should be guided by governance principles and maintenance business rules, rather than than how things appear in DRM. It's how they appear when published that is of primary importance. I think the new features related to Data Governance will help greatly in this regard. Users that are overwhelmed by the DRM UI can easily be limited to the attributes that are relevant to their specific workflows, and only the "Power users" will see everything.

Same sequence value for multiple targets

Similar Messages

Maybe you are looking for