Authenticating ILOM using windows LDAP

Hi
Has anyone had any problems using T5NNN iloms with windows ldap?
We have recently attempted to configure out iloms using windows 2008 ldap but they refuse to authenticate.
All the settings have been copied from a working server but still the problem persists.
Any/all suggestions would be much appreciated.

<BLOCKQUOTE><font size="1" face="Verdana, Arial, Helvetica">quote:</font><HR>Originally posted by Norbert Monfort ([email protected]):
I need to have OC4J authenticate to an LDAP directory (Netscape's iPlanet). Where did you find how to write your custom UserManager? I haven't been able to find specs on how to write mine.
Thanks!<HR></BLOCKQUOTE>
There aren't any specs per se on how to write this - however, go to www.orionsupport.com and check out the user manager information (in several articles) and use this to figure out the functions you need to write (use the javax.naming.directory package to write the functions against the LDAP.) I wrote just a basic authentication against Active Directory (the user type name/password which authenticates or it doesn't) - no add user stuff - which works well for our purposes.
Cheers
Ray
null

Similar Messages

Authenticating & Authorising using OID (LDAP)

Has anyone successfully used OID to manage authentication & authorisation?

<BLOCKQUOTE><font size="1" face="Verdana, Arial, Helvetica">quote:</font><HR>Originally posted by Norbert Monfort ([email protected]):
I need to have OC4J authenticate to an LDAP directory (Netscape's iPlanet). Where did you find how to write your custom UserManager? I haven't been able to find specs on how to write mine.
Thanks!<HR></BLOCKQUOTE>
There aren't any specs per se on how to write this - however, go to www.orionsupport.com and check out the user manager information (in several articles) and use this to figure out the functions you need to write (use the javax.naming.directory package to write the functions against the LDAP.) I wrote just a basic authentication against Active Directory (the user type name/password which authenticates or it doesn't) - no add user stuff - which works well for our purposes.
Cheers
Ray
null

Windows Authentication by using HTMLDB and Active directorty (AD)

Is it possible to write an application by using HTMLDB to use windows authentication by using Active Directory (AD) ?
Thanks!

Hi Tanya,
The IS_MEMBER routine won't necessarily work with AD since it actually checks for the sort of user/group relationship that is stored in OID (AD can store the relationship in a different way).
To check group membership you will need to write your own code which checks the group and/or user to determine whether they are in a specific group or not. I believe there are already some examples of that code in this forum, if you search for 'group and ldap' you should be able to find some examples.
If not, then post back and I'll try and dig something out.

How do I use Generic LDAP Authentication in JDeveloper?

I have an existing JSP/Java Servlet application that uses a generic LDAP server for user authentication. Each JSP page checks the user name against a database entry for authorization to that page (itâs a legacy app).
The following web.xml fragment describes the
security/login configuration:
<security-constraint>
<display-name>I Security Constraint</display-name>
<web-resource-collection>
<web-resource-name>ALL</web-resource-name>
<url-pattern>/*</url-pattern>
<http-method>GET</http-method>
<http-method>POST</http-method>
</web-resource-collection>
<auth-constraint>
<description>I</description>
<role-name>*</role-name>
</auth-constraint>
<user-data-constraint>
<transport-guarantee>NONE</transport-guarantee>
</user-data-constraint>
</security-constraint>
<login-config>
<auth-method>BASIC</auth-method>
<realm-name>I Enterprise Server</realm-name>
</login-config>
I want to use JDeveloper and the built-in OC4J environment for development/debugging. I have tried configuring jazn.xml to use a LDAP provider (both in **\j2ee\home\config\ and **\jdev\system9.0.3.1035\oc4j-config\)
1) How do I configure the internal OC4J environment to use the generic LDAP service?
2) Does the JAZN LDAP only work with Oracle OID?
3) Is there a document or list-of-documents that consolidates the JDeveloper OC4J server administration functions? The existing OC4J administrative documentation is splattered about various web documents.
Thanks
Jake

Todd,
This how-to may help answer some of your questions
http://otn.oracle.com/tech/java/oc4j/htdocs/how-to-jazn.html
If you have additional questions on configuring jazn.xml for LDAP and OiD, I think your best bet is post to 9iAS J2EE forum.
Thanks,
Yvonne

Authentication in weblogic portal server 8.1 sp2 using external LDAP

Hi,
I am trying to use external LDAP for authentication.
I have configured the ActiveDirectoryAuthenticator giving the necessary
values
( and added
"-Dcom.bea.p13n.usermgmt.AuthenticationProviderName=ActiveDirectoryAuthentic
ator" in startWeblgoic.cmd )
and can see the users and the groups from my LDAP provider in the admin
console and in the admin portal's "users and groups".
A set of users are given permission to access the restricted site and those
users are visible in the global role with the permission.
The web.xml is configured for BASIC auth-method, and the role is
<externally-defined/> in weblogic.xml.
Now when I access a restricted page, I am shown a dialog prompt to key in
the username and password.
Even when I key in the valid credentials, the restricted page is not shown
and an "Unauthorized xxx" 401 access error is thrown.
Any clue, on what i am missing.?
Please let me know if any suggestion / idea.
Regards,
Arun.

Assuming your application is a WebLogic Portal application, then yes you would definitely need to install WLP 8.1. WLP version 8.1 is the only version of WLP that will run on WLS/WLW version 8.1.
In order to obtain the product installer, you'll need to contact Oracle Support and file a request. It is not available for download from any Oracle public site. Only version 10.3 is available for download.
Brad

Deploying the Cloud service using Windows Authentication

Hi,
I have a VPN Connectivity established to other VM Server where the DB is also installed. Now I a have created an application with DB connectivity
I am able to connect the DB server using SQL authentication but how can I connect using Windows Authentication?
What configuration changes I have to do in web.config or I have to modify any more changes else where?
Thanks & Regards,
Suresh Sahu

Hi,
Based on your description, you have connected to DB server using SQL authentication, I suggest your read the following link, and do some change in SQL that installed in the VM, hope it helps. If I misunderstand, please feel free to let me know.
#http://msdn.microsoft.com/en-us/library/dd787978.aspx
Best Regards

Database access using windows authentication

We are updating our Applications to use single sign on and are running into a problem with database access. We are using CF11 Enterprise and SQL Server 2008 on IIS 7.5.
We have set up the ColdFusion Application Service to run under an AD service account and have created the data sources in CFAdmin leaving the username and password blank. The data sources verify and all seems good. The problem comes when running a query. The credential passed to the database is the service account and not the windows authenticated user. As such the query fails. What are we missing to get CF to pass the Windows Authenticated user credential instead of the service account?
Thanks
Tim

ColdFusion does not pass user's credentials to the database connections by default, and cannot pass Windows Authentication credentials that way. It only sends the service account's credentials (if you leave username/password blank as you have done). The only way to pass user credentials is to put them into the individual query calls themselves, and even then you can't pass Windows Authentication credentials. You would have to use SQL Server Logins, and create accounts for each user.
I think most people are using either a dedicated SQL Server login for ColdFusion and run all queries under that account, or they do as you have already done and use Windows Authentication along with the ColdFusion service account. If you need an audit trail, then pass usernames into the insert/update queries and store them manually along with the other data you are inserting/updating.
-Carl V.

Prerequisites for Using Windows NTLM Authentication

Hi,
One of the prerequisites for using Windows NTLM Authentication, mentioned on help.sap.com documentation, is:
- The users Web browser must be a Microsoft Internet Explorer
This means that users not using Internet Explorer cant authenticate using other web browser (Firefox and Netscape).
In PAM, SAP says that web browser based on mozzila 1.7.x is also supported, and from this version on, Firefox and Netscape, both, support NTLM.
NTLM Authentication in portal, still be supported with IE web browser?
Thanks and Regards,
Paul

Hi Paul,
I suspect that although it may not be officially supported, it will work. The main thing is that a frontend web server perform the NTLM authentication and pass the header variable back to the J2EE engine. By the time the header gets back to the J2EE engine, I dont think the portal has any idea how the header REMOTE_USER was generated, just that it was.
Not positive though, as I havent tested the scenario you describe below..just thought I'd throw in my two cents.
Marty

IOS 8 Safari not working with sites using Windows Authentication (again)

A testbed of iPhones and iPads were updated to iOS 8 today. When trying to access intranet sites in our company that use Windows (IIS) Authentication, it challenges for the login and password 2 or 3 times, then nothing - just hangs. These sites work fine on iOS 7 devices - and worked on the same devices that were upgraded.
Windows Authentication was broken in iOS 7.0 also and not fixed until a later update. Why does this keep getting broken?

This was a thread that discussed this when it was broken in iOS 7.0...
https://discussions.apple.com/thread/5327078?start=0&tstart=0
I just tested with Chrome on the iPhone upgraded to iOS 8 and it works fine. It is Safari that is broken again.
Of course, Apple won't give us a way to make Chrome the default browser when links are clicked in emails, so it's not exactly a solution.

Why we use the LDAP Authentication over the DB authentication?

Hi All,
Why we use the LDAP Authentication over the DB authentication?
Any specific region is for that?
When we use LDAP do we need DB authentication again or it will be optional?
In same case in ADSI do the DB authentication is optional or compulsory .
Thanks in advance
Tusar

LDAP / AD authentication is useful if you already use it in your organisation and you'll find that most orgs have some form of user authentication already in place.
Do users in your company have to log into to their machines every morning? If so, why not use those credentials to control access to Siebel? It's a way of providing a single directory of employee authentication information available across applications, keeping maintenance and change costs down.
When you use LDAP authentication, you specify an AD object that contains a set of DB authentication details so that the component can access the Siebel database. In Siebel 8, you can directly specify those details in the security profile. As such, you only then have to maintain a single set of DB specific authentication details: much easier to manage. You can always switch back to DB authentication if you want to, but you'd have to go through all users accounts and create them with the same login and password specified in AD.

Impersonate user when accessing Microsoft SQL Server from powershell using Windows Authentication

Hi All,
Below is the powershell script to connect a SQL DB using windows authentication by impersonating a user. The user should have login access to the server. Script can be highly useful when service id is used to access DB using powershell.
[reflection.assembly]::LoadWithPartialName("Microsoft.SqlServer.Smo") | Out-Null
$ds=$null
$conn = New-Object -typeName Microsoft.SqlServer.Management.Smo.Server -argumentList "Servername"
$db = New-Object Microsoft.SqlServer.Management.Smo.Database
$conn.ConnectionContext.ConnectAsUser = $true
$conn.ConnectionContext.LoginSecure=$true
$conn.ConnectionContext.ConnectAsUserName = "username"
$conn.ConnectionContext.ConnectAsUserPassword ="password
$conn.Loginmode
$db = $conn.Databases.Item("dbname")
$ds = $db.ExecuteWithResults("select top 10 Name from Tablename")
Foreach ($t in $ds.Tables)
Foreach ($r in $t.Rows)
Foreach ($c in $t.Columns)
Write-Host $c.ColumnName "=" $r.Item($c)

That is OK when you want to manage the instance biut it wojn't work if the tools are not installed.
This works from anywhere all of the time and is simpler:
$datasource='MyServerInstance'
$database='NorthWind'
$connStr='Data Source={0}; Database={1}; Trusted_Connection=True;' -f '$datasource,$database
$conn=New-Object System.Data.SQlClient.SQlConnection($connStr)
$conn.Open()
$cmd=$conn.CreateCommand()
$cmd.CommandText='select * from products'
$rdr=$cmd.ExecuteReader()
0..($rdr.FieldCount-1) | %{$rdr.GetName($_)}
$conn.Close()
If you want credentials just add them.
$connStr='Data Source={0}; Database={1}; Trusted_Connection=True;UID={2};PWD={3};' -f $datasource,$database,uid,$pwd
¯\_(ツ)_/¯

Possibilities using OD + LDAP in Windows Machines

Hi guys,
I have two situations here.
1-) What's the features using OD + LDAP in a Network hibrid (Mac + PC);
2-) What can I do and manage a Windows Machine included in OD + LDAP? Policies?
Thanks a lot
Bruno

I do not believe that is possible. Not the answer your wanted, I'm sure.

Claims Authentication Error connecting to BCS - but we're using Windows Authentication

We currently have an External List with a SQL Server SProc as a source in a SharePoint 2010 site. It has been working great for months now. I need to make a change to the External Content Type - and I have made changes in the past - but now strange things
are happening.
I can't view the external content type (or any) in SPD. I can create a new Secure Store Service Target Application in SPCentralAdmin and everything seems fine, but I can't consume the application in SPD. I get an error that BCS has rejected the
request. This is new and curious; I'm a Farm Administrator.
Looking at the logs, I find I get a Claims Authentication error that my ID can't be found (the error is below). This is also new and is very, very curious as we're not using Claims authentication for any of our sites. They all use Windows authentication.
I am also getting recent reports from users who are repeatedly challenged for credentials and wonder if this is related.
In my research, I've found suggestions from starting the CWTS Service (I was dubious, I can start the service, and it doesn't resolve the problem) to setting Metadata Store Permissions in SPCentralAdmin (I was again dubious as I'm a farm administrator -
and I get the same error when I try to make this assignment!) So I'm at a loss.
Here is the error (the X'd out information was correct in the trace):
SPSecurityContext.WindowsIdentity: Could not retrieve a valid windows identity for NTName='XXXXX\XXXXXX', UPN='[email protected]'. UPN is required when Kerberos constrained delegation is used. Exception: System.ServiceModel.EndpointNotFoundException:
There was no endpoint listening at net.pipe://localhost/s4u/022694f3-9fbd-422b-b4b2-312e25dae2a2 that could accept the message. This is often caused by an incorrect address or SOAP action. See InnerException, if present, for more details. ---> System.IO.PipeException:
The pipe endpoint 'net.pipe://localhost/s4u/022694f3-9fbd-422b-b4b2-312e25dae2a2' could not be found on your local machine. --- End of inner exception stack trace --- Server stack trace:
at System.ServiceModel.Channels.PipeConnectionInitiator.GetPipeNam...
We're not using Kerberos at all. We're using good, old-fashioned Windows Authentication. The only changes made to the platform recently have been updates. The error could, of course, be erroneous and I may be charging down the wrong path.
But although I find many links when I Bing the error, all the links pertain to sites using Claims authentication - even the Error Category in my log is "Claims Authentication" - but we're not using Claims Authentication...
Again, any help at all will be appreciated. Thanks!

Hi Kevin,
From the error message, we might be missing user permissions to the BCS Metadata Store. Please perform the steps below and test the issue again:
1. Open the SharePoint Central Administration website with either a Farm administrator account or an account that has been delegated permissions to administer the Business Data Connectivity Service Applications.
2. On the Quick Launch, click Application Management.
3. On the Application Management page, under Service Applications, click Manage service applications.
4. In the list of services, select the row of the Business Data Connectivity Service Application that you created in Create the Business Data Connectivity service application and then click Manage and then Set Metadata Store Permissions.
5. Enter the Farm Administrator account and any other delegate administrators if you have them and then click Add.
6. For each account or group that you added that is an administrator of the Business Data Connectivity Service Application, select the Edit, Execute, Selectable In Clients, and Set Permissions checkboxes.
7. Select the Propagate permissions to all BDC Models, External Systems and External Content Types in the BDC Metadata Store. Doing so will overwrite existing permissions checkbox.
8. Click OK.
Also, make sure your account is added as local administrator.
Regards,
Rebecca Tu
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

OBIEE 11G 64-Bit Windows LDAP Admin Server Startup Issue

All,
I have OBIEE 11G installed on 64-bit Windows, and can see all my LDAP users inside Admin Console just fine. When I reorder my LDAP above the DefaultAuthenticator, and make them both 'SUFFICIENT', my Admin Server no longer starts. It hangs on a line in the AdminServer.log that roughly says '<Security initializing using security realm myrealm.>'. Has anyone ran into this? If so, how do you get the Admin Server to start with a non default LDAP authenticator? I've tried re-ordering numerous ways with the DefaultIdentityAsserter in the middle and at the bottom; I've also tried switching the Control Flags on both with REQUIRED and OPTIONAL, all to no avail. Finally, I tried deleting out the DefaultAuthenticator all together, and it still won't start. At this point, I'm assuming this is another 64-bit issue that was not tested properly. Any thoughts/help will be greatly appreciated.
Thanks in Advance,
Josh

Paul,
Unfortunately that made no difference. I have pasted in the startup log below. Perhaps someone has some insight into what's happening?
####<Apr 12, 2011 8:58:31 AM EDT> <Info> <WebLogicServer> <HQ200-HYPPROD03> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1302613111266> <BEA-000000> <WebLogic Server "AdminServer" version:
WebLogic Server 10.3.3.0 Fri Apr 9 00:05:28 PDT 2010 1321401 Copyright (c) 1995, 2009, Oracle and/or its affiliates. All rights reserved.>
####<Apr 12, 2011 8:58:31 AM EDT> <Notice> <Log Management> <HQ200-HYPPROD03> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1302613111344> <BEA-170019> <The server log file D:\Oracle\Middleware\user_projects\domains\bifoundation_domain\servers\AdminServer\logs\AdminServer.log is opened. All server side log events will be written to this file.>
####<Apr 12, 2011 8:58:31 AM EDT> <Info> <Log Management> <HQ200-HYPPROD03> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1302613111360> <BEA-170023> <The Server Logging is initialized with Java Logging API implementation.>
####<Apr 12, 2011 8:58:31 AM EDT> <Info> <Diagnostics> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613111438> <BEA-320001> <The ServerDebug service initialized successfully.>
####<Apr 12, 2011 8:58:31 AM EDT> <Info> <Server> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613111594> <BEA-002622> <The protocol "t3" is now configured.>
####<Apr 12, 2011 8:58:31 AM EDT> <Info> <Server> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613111594> <BEA-002622> <The protocol "t3s" is now configured.>
####<Apr 12, 2011 8:58:31 AM EDT> <Info> <Server> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613111594> <BEA-002622> <The protocol "http" is now configured.>
####<Apr 12, 2011 8:58:31 AM EDT> <Info> <Server> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613111594> <BEA-002622> <The protocol "https" is now configured.>
####<Apr 12, 2011 8:58:31 AM EDT> <Info> <Server> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613111594> <BEA-002622> <The protocol "iiop" is now configured.>
####<Apr 12, 2011 8:58:31 AM EDT> <Info> <Server> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613111610> <BEA-002622> <The protocol "iiops" is now configured.>
####<Apr 12, 2011 8:58:31 AM EDT> <Info> <Server> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613111610> <BEA-002622> <The protocol "ldap" is now configured.>
####<Apr 12, 2011 8:58:31 AM EDT> <Info> <Server> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613111610> <BEA-002622> <The protocol "ldaps" is now configured.>
####<Apr 12, 2011 8:58:31 AM EDT> <Info> <Server> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613111610> <BEA-002622> <The protocol "cluster" is now configured.>
####<Apr 12, 2011 8:58:31 AM EDT> <Info> <Server> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613111610> <BEA-002622> <The protocol "clusters" is now configured.>
####<Apr 12, 2011 8:58:31 AM EDT> <Info> <Server> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613111610> <BEA-002622> <The protocol "snmp" is now configured.>
####<Apr 12, 2011 8:58:31 AM EDT> <Info> <Server> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613111610> <BEA-002622> <The protocol "admin" is now configured.>
####<Apr 12, 2011 8:58:31 AM EDT> <Info> <Server> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613111610> <BEA-002624> <The administration protocol is "t3s" and is now configured.>
####<Apr 12, 2011 8:58:31 AM EDT> <Info> <RJVM> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613111657> <BEA-000570> <Network Configuration for Channel "AdminServer"
Listen Address          :7002
Public Address          N/A
Http Enabled          true
Tunneling Enabled     false
Outbound Enabled     false
Admin Traffic Enabled     true>
####<Apr 12, 2011 8:58:31 AM EDT> <Info> <Server> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613111688> <BEA-002609> <Channel Service initialized.>
####<Apr 12, 2011 8:58:31 AM EDT> <Info> <Socket> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613111719> <BEA-000406> <NTSocketMuxer was built on Jan 24 2006 20:40:35
>
####<Apr 12, 2011 8:58:31 AM EDT> <Info> <Socket> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613111751> <BEA-000436> <Allocating 3 reader threads.>
####<Apr 12, 2011 8:58:31 AM EDT> <Info> <Socket> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613111751> <BEA-000446> <Native IO Enabled.>
####<Apr 12, 2011 8:58:31 AM EDT> <Info> <IIOP> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613111907> <BEA-002014> <IIOP subsystem enabled.>
####<Apr 12, 2011 8:58:35 AM EDT> <Info> <Security> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613115079> <BEA-090894> <Successfully loaded the OPSS Policy Provider using oracle.security.jps.internal.policystore.JavaPolicyProvider.>
####<Apr 12, 2011 8:58:35 AM EDT> <Info> <Security> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613115704> <BEA-000000> <Starting OpenJPA 1.1.1-SNAPSHOT>
####<Apr 12, 2011 8:58:35 AM EDT> <Info> <Security> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613115797> <BEA-000000> <StoreServiceImpl.initJDO - StoreService is initialized with Id = ldap_m7FMisDU3HeeJX/MUK4nqmEiSqI=>
####<Apr 12, 2011 8:58:36 AM EDT> <Info> <Security> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613116266> <BEA-090516> <The Authenticator provider has preexisting LDAP data.>
####<Apr 12, 2011 8:58:36 AM EDT> <Info> <Security> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613116594> <BEA-090516> <The Authorizer provider has preexisting LDAP data.>
####<Apr 12, 2011 8:58:36 AM EDT> <Info> <Security> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613116704> <BEA-000000> <Parsing class "com.bea.common.security.store.data.Top".>
####<Apr 12, 2011 8:58:36 AM EDT> <Info> <Security> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613116735> <BEA-000000> <Parsing class "com.bea.common.security.store.data.DomainRealmScope".>
####<Apr 12, 2011 8:58:36 AM EDT> <Info> <Security> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613116735> <BEA-000000> <Parsing class "com.bea.common.security.store.data.RegistryScope".>
####<Apr 12, 2011 8:58:36 AM EDT> <Info> <Security> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613116735> <BEA-000000> <Parsing class "com.bea.common.security.store.data.PKITypeScope".>
####<Apr 12, 2011 8:58:36 AM EDT> <Info> <Security> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613116735> <BEA-000000> <Parsing class "com.bea.common.security.store.data.XACMLTypeScope".>
####<Apr 12, 2011 8:58:36 AM EDT> <Info> <Security> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613116735> <BEA-000000> <Parsing class "com.bea.common.security.store.data.BEASAMLPartner".>
####<Apr 12, 2011 8:58:36 AM EDT> <Info> <Security> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613116735> <BEA-000000> <Parsing class "com.bea.common.security.store.data.Credential".>
####<Apr 12, 2011 8:58:36 AM EDT> <Info> <Security> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613116751> <BEA-000000> <Parsing class "com.bea.common.security.store.data.CredentialMap".>
####<Apr 12, 2011 8:58:36 AM EDT> <Info> <Security> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613116751> <BEA-000000> <Parsing class "com.bea.common.security.store.data.XACMLEntry".>
####<Apr 12, 2011 8:58:36 AM EDT> <Info> <Security> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613116751> <BEA-000000> <Parsing class "com.bea.common.security.store.data.BEASAMLAssertingParty".>
####<Apr 12, 2011 8:58:36 AM EDT> <Info> <Security> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613116766> <BEA-000000> <Parsing class "com.bea.common.security.store.data.BEASAMLRelyingParty".>
####<Apr 12, 2011 8:58:36 AM EDT> <Info> <Security> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613116782> <BEA-000000> <Parsing class "com.bea.common.security.store.data.PasswordCredential".>
####<Apr 12, 2011 8:58:36 AM EDT> <Info> <Security> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613116782> <BEA-000000> <Parsing class "com.bea.common.security.store.data.UserPasswordCredential".>
####<Apr 12, 2011 8:58:36 AM EDT> <Info> <Security> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613116782> <BEA-000000> <Parsing class "com.bea.common.security.store.data.PasswordCredentialMap".>
####<Apr 12, 2011 8:58:36 AM EDT> <Info> <Security> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613116797> <BEA-000000> <Parsing class "com.bea.common.security.store.data.ResourceMap".>
####<Apr 12, 2011 8:58:36 AM EDT> <Info> <Security> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613116797> <BEA-000000> <Parsing class "com.bea.common.security.store.data.PKIResourceMap".>
####<Apr 12, 2011 8:58:36 AM EDT> <Info> <Security> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613116797> <BEA-000000> <Parsing class "com.bea.common.security.store.data.WLSCertRegEntry".>
####<Apr 12, 2011 8:58:36 AM EDT> <Info> <Security> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613116813> <BEA-000000> <Parsing class "com.bea.common.security.store.data.WLSCredMapCollectionInfo".>
####<Apr 12, 2011 8:58:36 AM EDT> <Info> <Security> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613116813> <BEA-000000> <Parsing class "com.bea.common.security.store.data.WLSPolicyCollectionInfo".>
####<Apr 12, 2011 8:58:36 AM EDT> <Info> <Security> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613116813> <BEA-000000> <Parsing class "com.bea.common.security.store.data.WLSRoleCollectionInfo".>
####<Apr 12, 2011 8:58:36 AM EDT> <Info> <Security> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613116813> <BEA-000000> <Parsing class "com.bea.common.security.store.data.XACMLAuthorizationPolicy".>
####<Apr 12, 2011 8:58:36 AM EDT> <Info> <Security> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613116829> <BEA-000000> <Parsing class "com.bea.common.security.store.data.XACMLRoleAssignmentPolicy".>
####<Apr 12, 2011 8:58:36 AM EDT> <Info> <Security> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613116844> <BEA-000000> <Parsing class "com.bea.common.security.store.data.Endpoint".>
####<Apr 12, 2011 8:58:36 AM EDT> <Info> <Security> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613116844> <BEA-000000> <Parsing class "com.bea.common.security.store.data.Partner".>
####<Apr 12, 2011 8:58:36 AM EDT> <Info> <Security> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613116860> <BEA-000000> <Parsing class "com.bea.common.security.store.data.SPPartner".>
####<Apr 12, 2011 8:58:36 AM EDT> <Info> <Security> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613116876> <BEA-000000> <Parsing class "com.bea.common.security.store.data.IdPPartner".>
####<Apr 12, 2011 8:58:36 AM EDT> <Info> <Security> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613116907> <BEA-000000> <Parsing class "com.bea.common.security.store.data.SAML2CacheEntry".>
####<Apr 12, 2011 8:58:36 AM EDT> <Info> <Security> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613116922> <BEA-000000> <Parsing class "com.bea.common.security.store.data.SchemaVersion".>
####<Apr 12, 2011 8:58:37 AM EDT> <Info> <Security> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613117516> <BEA-090516> <The CredentialMapper provider has preexisting LDAP data.>
####<Apr 12, 2011 8:58:37 AM EDT> <Info> <Security> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613117532> <BEA-090516> <The RoleMapper provider has preexisting LDAP data.>
####<Apr 12, 2011 8:58:37 AM EDT> <Info> <Security> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613117766> <BEA-090093> <No pre-WLS 8.1 Keystore providers are configured for server AdminServer for security realm myrealm.>
####<Apr 12, 2011 8:58:37 AM EDT> <Notice> <Security> <HQ200-HYPPROD03> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1302613117766> <BEA-090082> <Security initializing using security realm myrealm.>
Thanks,
Josh

Re: single log-on (SSO) using Windows 2000 and Active Directory

Hi Honggo,
Its possible to see all the Active Directory users in WLS6.1 by
configuring the ldap realm.
You can use any of the username/password in ldap but you still have to
login again.
However the concept of single sign on across operating system and WLS
might not work in WLS6.1. WLS 7.0 allows you to write code that
supports these kind of things better.
honggo wrote:
anybody know how to use windows 2k authentication
(implemented by Active Directory)
to support SSO in WebLogic Server?
What I mean is I want to login once and only once
in win2000 and somehow weblogic server know
who is currently logon and impose some Access Control
many regards in advance
honggo

Replying again because it didn´t seem to work last time.
Could you be more specific? What code do I have to write to achive single sing on across Windows and WLS 8.1?
Regards
Mauricio Hurtado
Banco de Mexicio

Authenticating ILOM using windows LDAP

Similar Messages

Maybe you are looking for