IOS 8 Safari not working with sites using Windows Authentication (again)

A testbed of iPhones and iPads were updated to iOS 8 today. When trying to access intranet sites in our company that use Windows (IIS) Authentication, it challenges for the login and password 2 or 3 times, then nothing - just hangs.  These sites work fine on iOS 7 devices - and worked on the same devices that were upgraded.
Windows Authentication was broken in iOS 7.0 also and not fixed until a later update. Why does this keep getting broken?

This was a thread that discussed this when it was broken in iOS 7.0...
https://discussions.apple.com/thread/5327078?start=0&tstart=0    
I just tested with Chrome on the iPhone upgraded to iOS 8 and it works fine. It is Safari that is broken again.
Of course, Apple won't give us a way to make Chrome the default browser when links are clicked in emails, so it's not exactly a solution.

Similar Messages

  • My lap top name is hp pavilion dv 600. and my micriophon is not working . i am using windows 7.

    My lap top name is hp pavilion dv 600. and my micriophon is not working . i am using windows 7.  before that i was using widows vista. in the cotorl panel in the hardware and sound section . in the sound section  in the recording tab it is written that  microphone is not plugged in while i have microphone in front of my screen . could any one help me.?????

    Try to disable transparency in Windows, see:
    *[[/questions/804050]]
    Right click in a free space on your desktop.<br />
    Left click on Personalization.<br />
    There are four options at the bottom of the screen, choose "Window Color and Appearance".<br />
    Select a border color<br />
    Uncheck: "Enable transparency"<br />
    Try to disable hardware acceleration in Firefox.
    *Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
    *https://hacks.mozilla.org/2010/09/hardware-acceleration/
    *https://support.mozilla.org/kb/how-do-i-upgrade-my-graphics-drivers

  • Safari not working with Yosemite- incompatible with google search too

    Ever since I upgraded my macbook pro, Safari has been slow.  In the past 2 days, it's more than slow - it's impossible.  I am able to get to pages I have bookmarked or get to links in email documents - but every time I try to do a search using the search bar in Safari, it hangs.  Sometimes I get a list of possible websites (after a few minutes) but if I click on any of those, Safari just hangs there and won't go.  I even had to use Chrome in order to generate this question in the discussion groups. Does anyone have any suggestions other than using an alternate browser.   Is it possible that google and Safari on Yosemite are incompatible? I did try using the "Develop" menubar option and chose DuckDuckgo as the search tool and it worked a bit better.
    This is now the 2nd big issue I've had with Yosemite -- it totally would not work with my Adobe Photoshop Elements program -- I spent hours on the Adobe forums and discovered that 100s of others were also having issues.  It turned out to be a problem with Yosemite and the trackpad.  Adobe finally came up with a temporary plugin that allows Elements (and other Adobe programs) to run.
    Suggesions on Safari other than ditching it and using Chrome?

    Try a Safari reset.
    Safari/Preferences/Advanced - enable the Develop menu, then go there and Empty Caches. Quit/reopen Safari and test. Then try Safari/History/Show History and delete all history items.  Quit/reopen Safari and test. You can also try try Safari/Clear History and Web Site Data. The down side is it clears all cookies.Doing this may cause some sites to no longer recognize your computer as one that has visited the web site.

  • Ipod touch will not sync with itunes using windows 7 makes everything freeze

    My itouch has not been able to sync with itunes using windows 7 for a couple of days.  Everything just freezes and I have to reboot my laptop. I have reinstalled itunes and deleted the backup of the ipod but nothing is working.

    http://support.apple.com/kb/TS1538
    There have been some problems accessing pages on the Apple web site.  If the hyperlink gives you a "We're sorry" message, try again.

  • HP Envy 110e printer (D411a) will not install with me using Windows 8 Consumer Preview. I need help

    Just pick up the new HP Envy D411a printer, i set up with my wi-fi and all was going well until i put the disk in my PC . Just to find out that my NEW printer will not work with the Windows 8 Consumer Preview . I need help with this or until UP update the new printer to work with Windows 8, which will be on the market soon. Can some one please HELP ME

    Available now is print and scan capability that HP worked with Microsoft to include into Windows 8.
    The Printer Install Wizard can provide you additional information:
    http://h30434.www3.hp.com/t5/Windows-8-Consumer-Preview/How-to-Get-Your-Inkjet-Printer-Working-with-...
    If I have helped you solve your issue please mark it as solved .....
    (I am an HP employee)

  • Safari 3 for Win and Mac not working with sites

    I work for a company that does all the IT stuff for the county of San Diego, and it was brought to our attention that the County site (and some of the sites in it) don't play nice with Safari 3 on either platform. I downloaded the latest beta, plugged in http://www.sdcounty.ca.gov , and get a bunch of boxes at the top of the window.
    The sites work fine in IE 5-7, Safari 2 and up, and Firefox. Someone on the ARStechnica forums mentioned they saw our servers (IIS and Unix/Apache) are set for uft-32. Okay, so does anyone know what we should have them set at so people (and our client) stop complaining we don't work with Safari Beta?
    Thanks for any feedback/help.
    Greg

    Thanks Tom,
    I'll look into it. We're going to change the test server to utf-8, but can't until the one guy who has admin access to the box gets back from training in about a week. Yes, they could have given admin or sudo access to a few of us, but that would have made too much sense.

  • Flash, Adobe Air, Time Machine, Safari not  working with Snow Leopard

    Really need some help with this.
    Did an archive and install of Leopard then installed Snow Leopard. No problems yet.
    90% of Video sites would not work. Uninstalled and reinstalled Flash. Uninstalled ShockWave, could not reinstall with 10.6.1.
    Attempt to install adobe air, received this message: "couldn't write the application to hard drive - please verify and try again." performed verify disk, disk permissions, repair permissions all ok.
    Attempted to install Air again, same message.
    Tried to use Time Machine to open Safari from a week ago, received message: I did not have permission.
    Using Macbook Pro, 2g memory, 80g hd, with 42g free.
    Backed up on ext. HD,
    Oh, one more, getting a lot of spinning wheels when using Safari that causes a lockup and hard re-start.
    I have an expensive piece of software that uses adobe air and I create videos for my business and I'm not able to do so now.
    Can anyone give me any ideas what I can do.
    Thanks,
    Z

    After a couple of days of problems with Snow Leopard and flash, safari etc... I figured out the problem is with my account.
    I created a new admin account and everything seems to be working. Well almost.
    a couple of things I've noticed are right clicking on dock icons does nothing, no option to quit or keep in dock.
    Apple Techs', had me change my account months ago to fix a problem with safari crashing. It didn't really work and more problems resulted.
    *So now my big question is: How do I move need items over to the new account.* I don't want to move everything over as I might bring what caused the problem in the first place.
    What I need are several apps,(like ilife, iwork, firefox, devonthink, 1password etc.) downloads, desktop, docs, files, and book marks.
    *What is the best way for me to do this?* Is there anything I need to do re: Snow Leopard on the new account?
    I feel like I have a new and functioning Mac again just around the corner.
    Looking for your help, thanks,
    Z

  • Safari Not working at all! (Windows 7)

    Hi all,  have searched a lot of forums and haven't found a soluion to this one yet.
    I am using Windows 7, Safari 5.1.2,  iTunes 10.5.2, Quicktime 7.7.1
    Safari does not open any webpage although all other functions seem to work, iTuines Store only opens as simple HTML (see below), and only after some long wait.
    (iTunes Diagnostic report below)
    So far I have tried:
    Turning off my firewall
    Re-setting winsock services
    Re-starting bonjour service
    Re-installing all above apple components (individualy and collectively)
    Deleting 'preferences' files in Safari
    Any other suggestions greatfuly received!
    Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
    Alienware Aurora-R2
    iTunes 10.5.2.11
    QuickTime 7.7.1
    FairPlay 1.13.37
    Apple Application Support 2.1.6
    iPod Updater Library 10.0d2
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 4.0.0.97
    Apple Mobile Device Driver 1.57.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.5.502
    Gracenote MusicID 1.9.5.115
    Gracenote Submit 1.9.5.143
    Gracenote DSP 1.9.5.45
    iTunes Serial Number 00C0A9440EB8E4E0
    Current user is not an administrator.
    The current local date and time is 2012-01-02 15:09:59.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is not supported.
    Core Media is supported.
    Video Display Information
    ATI Technologies Inc., ATI Radeon HD 5670
    **** External Plug-ins Information ****
    No external plug-ins installed.
    Genius ID: 94e8b7f86b0ccd6d022cf60f853a0e0e
    iPodService 10.5.2.11 (x64) is currently running.
    iTunesHelper 10.5.2.11 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name:    {4D964FBB-2241-41E0-8588-586247A25BD2}
    Description:    Bluetooth Device (Personal Area Network)
    IP Address:    0.0.0.0
    Subnet Mask:    0.0.0.0
    Default Gateway:    0.0.0.0
    DHCP Enabled:    Yes
    DHCP Server:   
    Lease Obtained:    Thu Jan 01 00:00:00 1970
    Lease Expires:    Thu Jan 01 00:00:00 1970
    DNS Servers:   
    Adapter Name:    {4CC96F08-E3A4-4BFB-A279-5B75348B2892}
    Description:    Killer Xeno NDIS EDGE Interface
    IP Address:    192.168.1.80
    Subnet Mask:    255.255.255.0
    Default Gateway:    192.168.1.254
    DHCP Enabled:    Yes
    DHCP Server:    192.168.1.254
    Lease Obtained:    Mon Jan 02 12:46:23 2012
    Lease Expires:    Tue Jan 03 12:46:23 2012
    DNS Servers:    192.168.1.254
    Adapter Name:    {043FA1B7-15EA-4D03-9207-3C001087C952}
    Description:    Realtek PCIe GBE Family Controller
    IP Address:    0.0.0.0
    Subnet Mask:    0.0.0.0
    Default Gateway:    0.0.0.0
    DHCP Enabled:    No
    DHCP Server:   
    Lease Obtained:    Thu Jan 01 00:00:00 1970
    Lease Expires:    Thu Jan 01 00:00:00 1970
    DNS Servers:   
    Active Connection:    LAN Connection
    Connected:    Yes
    Online:        Yes
    Using Modem:    No
    Using LAN:    Yes
    Using Proxy:    No
    SSL 3.0 Support:    Enabled
    TLS 1.0 Support:    Enabled
    Firewall Information
    Windows Firewall is on.
    iTunes is NOT enabled in Windows Firewall.
    Connection attempt to Apple web site was successful.
    Connection attempt to browsing iTunes Store was successful.
    Connection attempt to purchasing from iTunes Store was successful.
    Connection attempt to iPhone activation server was successful.
    Connection attempt to firmware update server was successful.
    Connection attempt to Gracenote server was successful.
    Last successful iTunes Store access was 2012-01-02 13:27:03.

    Hi B Noir,
    I recently had to do a System Restore on my Windows 7 64 bit machine and then I got the dreaded "Safari has stopped working" windows whenever I try to launch it.  To be more specific, Safari, doesn't even launch.  I get that message.  Then when I click "Close the program", I get the "Safari has stopped working" message again. After I close that, then it stops.
    I've tried reinstalling the latest version of Safari twice now, and it still isn't working. 
    I also tried creating another Windows account, and Safari does not work on the new account either, unfortunately.
    Finally, I also tried your "So-much-for-subtlety" instructions and that unfortunately did not work.
    Any ideas?  If it helps, here's the problem signature from when I get the "Safari has stopped working window":
    Problem signature:
      Problem Event Name:          APPCRASH
      Application Name:          Safari.exe
      Application Version:          5.34.52.7
      Application Timestamp:          4eb16d27
      Fault Module Name:          KERNELBASE.dll
      Fault Module Version:          6.1.7601.17651
      Fault Module Timestamp:          4e211319
      Exception Code:          80000003
      Exception Offset:          0001280c
      OS Version:          6.1.7601.2.1.0.768.3
      Locale ID:          1033
      Additional Information 1:          00b8
      Additional Information 2:          00b85080f77ffe6e49f095c1fe3be289
      Additional Information 3:          b2f2
      Additional Information 4:          b2f2b584c57e4d0d4f1a9442f91680f3
    Read our privacy statement online:
      http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
    If the online privacy statement is not available, please read our privacy statement offline:
      C:\Windows\system32\en-US\erofflps.txt
    Thank you.

  • Flash Player Does Not Work with IE8 and Windows XP

    I am using Windows XP VR 5.1 with SP3. Flash Player does not function? So videos will not play that use Flash Player. The Adobe Support Site has been 000 Help because it is a free product. Microsoft says it is an Adobe problem. Finger pointing to the nth degree. I have loaded the latest version of Javascript and Flash Palyer.. Any ideas?

    Resetting IE is a shotgun approach, but may be much easier (and faster) for a user than trying to troubleshoot and find exactly which add-on, control, setting is causing issues. For a fast approach, you can reset IE, then start re-installing the add-ons you wish to use. Here is a kb that describes the process and even provides a Fix it: http://support.microsoft.com/kb/923737
    If you’d like to troubleshoot, here are some steps that will fix most issues with Internet Explorer and Add-ons. This can be more of a scalpel approach, and could help you save your cookies, stored passwords, etc.
    1)      Update your Windows software
    a.       Follow the steps below to view updates that are available for your computer.
                                                       i.      Click to go online to the Windows Update website
    1.       Note: If Microsoft Update is not installed, you will be taken to the Windows Update website. See the note below if Microsoft Update is not installed.
                                                     ii.      Click Custom to check for available updates. In the left pane, under Select by Type, click each of the following links to view all available updates:
    1.       High Priority
    2.       Software, Optional
    3.       Hardware, Optional
                                                    iii.      Select the updates you want, click Review and install updates, and then click Install Updates.
    b.      What do I do if Microsoft Update is not installed?
                                                       i.      Follow the steps below to install Microsoft Update and check for updates.
    1.       Click to go online to the Windows Update website
    2.       Click the Go button next to the Get Microsoft Update Today and then click Start Now.
    3.       Review the license agreement, and then click Continue.
    4.       After setup is complete, click Check for Updates.
    5.       Click Custom to check for available updates. In the left pane, under Select by Type, click each of the following links to view all available updates:
    a.       High Priority
    b.      Software, Optional
    c.       Hardware, Optional
    6.       Select the updates you want, click Review and install updates, and then click Install Updates.
    2)      Turn off Internet Explorer add-ons you don't recognize
    a.       When you visit a website, an add-on might be downloaded without your knowledge, or you might be prompted to download an add-on. These add-ons might cause Internet Explorer to run slowly or become unresponsive. You should remove all Internet Explorer add-ons you don't recognize or trust.
    b.      How do I spot malicious add-ons?
                                                       i.      You can usually spot malicious add-ons under the Name column in the Manage Add-ons dialog box. Malicious add-ons might have:
    1.       Blank names.
    2.       Names that include random characters or have a sequence of numbers and letters (for example, fhriduvh.dll or f6rid8vh.exeas as opposed to Windows Messenger).
    3.       A publisher name you might not recognize.
    c.       How do I disable an add-on?
                                                       i.      Open Internet Explorer.
                                                     ii.      Depending on your version of Internet Explorer, do one of the following:
    1.       In Internet Explorer 6, click the Tools menu, and then click Manage Add-ons.
    2.       In Internet Explorer 7, click the Tools menu, point to Manage Add-ons, and then click Enable or Disable Add-ons.
    3.       In Internet Explorer 8, click the Tools menu, click Manage Add-ons, and then click Toolbars and Extension (if necessary). Also note the drop down list labeled “Show:” You are interested in Add-ons and Downloaded
    4.       Follow these steps to determine the version of Internet Explorer you're using:
    a.       Open Internet Explorer.
    b.      Press ALT+H, and then click About Internet Explorer.
    c.       How can I find which version of Internet Explorer I'm using if it won't launch?
                                                                                                                                i.      If you're unable to launch Internet Explorer you can use the following steps to determine the version you're using:
    1.       Click Start, click Run, type %ProgramFiles%\Internet Explorer, and then click OK.
    2.       Right-click iexplore, click Properties, and then click Version.
    3.       Under Item name, click File Version. The version number appears under Value to the right of File Version.
    a.       Note:If the file version number begins with 6, you have Internet Explorer 6. If the file version number begins with 7, you have Internet Explorer 7. If the file version number begins with 8, you have Internet Explorer 8.
    d.      If you aren't using the latest version of Internet Explorer, consider updating.
                                                                                                                                i.      How do I update to the latest version of Internet Explorer?
    1.       Click to download and install the latest version of Internet Explorer        
                                                                                                                              ii.      How can I update Internet Explorer without launching my web browser?
    1.       Click to go online to the Windows Update website.
    2.       Click Custom to check for available updates.
    3.       In the left pane, under Select by Type, click Software, Optional.
    4.       Select the Internet Explorer update, and then click Review and install updates.
                                                    iii.      Click the name of the add-on.
    1.       Click Disable. You might have to restart Internet Explorer for the changes to take effect.
    2.       Why do some add-ons include (Not verified) in the Publisher column?
    a.       If (Not verified) is displayed in the Publisher column in the Manage Add-ons dialog box, the add-on itself is not digitally signed even though the program that installed it might be. A digital signature verifies that a file comes from the person or publisher it claims to be from, and that no one has tampered with it since it was digitally signed.
    3.       How do I disable an add-on if I can't access Internet Explorer?
    a.       Click Start, and then click Control Panel.
    b.      Double-click Internet Options.
    c.       Click the Programs tab, and then click Manage Add-ons.
    d.      Click the name of the add-on you want to disable, and then select Disable.
    e.      When the Add-on Status dialog box appears, click OK to close it.
    3)      Perform a free Full Service Scan using Windows Live OneCare safety scanner (not necessary if you don’t suspect viruses and are confident in the protection you have on your machine).
    a.       Go to the following website, and then click Full Service Scan: Windows Live OneCare safety scanner
                                                       i.      http://go.microsoft.com/fwlink/?linkid=56726
    If you are still experiencing issues, perform these steps. If the issue subsides, you may discontinue the remainder of the steps
    1)      Disable all add-ons (one at a time) until you can no longer reproduce the problem
    a.       Close all Internet Explorer windows.
    b.      Click Start, and then click Control Panel.
    c.       Click Network and Internet Connections, and then click Internet Options.
    d.      Click the Programs tab, and then click Manage Add-ons.
    e.      Click the name of the add-on you want to turn off, and then, under Settings, click Disable.
    f.        Click OK.
    g.       Restart Internet Explorer. Continue using Internet Explorer the same way you did when you received a crash report. If Internet Explorer continues to crash after disabling this add-on, continue with the next step.
    h.      Repeat steps b through g for each add-on listed. When you can no longer reproduce the problem, the most recently disabled add-on is the cause of the problem. Once you discover the add-on that is causing the issues, you can uninstall it (use Manufacturer’s uninstaller if one is provided) then if you wish to continue to use the add-on, install the latest version from the manufacturer’s site.

  • Easy Print VI panel not working with 64-bit windows vista

    We have a significantly sized application developed in Labview 8.2.1 that is designed to work on a standalone computer. This application uses "Easy Print VI Panel" to print report pages which are basically front panels of various VIs. The application also prints some report pages using the "Print Report" module. Typically we use the application builder and use the generated installer to install the application on a target computer. We also include the appropriate Run-Time engine and NI VISA 4.1. The applications works exactly as designed on all versions of 32-bit Windows (ME, XP, Vista). Now, when this application was installed on a machine running Windows Vista 64-bit, attempts to print reports resulted in a lot of blank pages. I noticed that the report pages that are based on the "Easy Print VI Panel" module were blank whereas the ones that are based on the "Print Report" module were not blank.
    To further troubleshoot, I created a very small application. The only function of this application is to use the "Easy Print VI Panel" to print the front panel of another VI that I bundled inside the application. I observed the same behavior.  
    From what I can tell, either:
    1. "Easy Print VI Panel" with Labview 8.2.1 is not compatible with Windows Vista 64-bit
    2. The Labview Run-Time Engine 8.2.1 has some incompatibility with Windows Vista 64-bit (I have not tried to install the full development system on the 64-bit Vista computer)
    Any insights as to what may be causing this? or does anyone know of a fix for this issue. I am attaching the latter simple test code to the post.
    Thanks
    Attachments:
    test_print.vi ‏18 KB

    Sorry Sam, I couldn't get my hands on a 64-bit Vista machine to tinker with your VI. I got a little obsessed with trying to get ahold of a computer to test it out on, that I overlooked actually taking the time to think about the problem. But, now that I'm thinking about it, which operating system did you build this application on? Sometimes an application that was built in another OS than it's running on will have problems caused by the differences in the OS. I'd like to try building the application in 64-bit Vista and deploying it to another 64-bit Vista machine, but unfortunately, I can't test this out myself. My gut feeling is that the application is acting up because it wasn't built in 64-bit Vista, not because the Easy Print VI or the 8.2.1 Run-Time Engine themselves are incompatible with 64-bit Vista. If you can, please test out that theory. That will definitely help determine if it's truly a bug or not.
    Product Support Engineer
    National Instruments

  • ODBC Connection Pooling not working with 10g On Windows 2003

    I have a bog standard Windows 2003 machine and installed Oracle 10g on it. It seems that the ODBC Connection pooling is not working.
    I am using ASP and every time I try and render a simple page it is taking 4-5 seconds which is the time necessaru to create a database connection. ( Machine is 2.8 Ghz Xeon with 2 gigs of Ram)
    The following VB Code can be used to test that the pooling is not working. It creates 2 connections to the database. On oracle 10g on windows 2003, it takes 5 seconds to create the first connection, and another 5 seconds to create the second connection.
    When you run the same program on windows 2000 and oracle 9, the first connection take 3 seconds, and the second 0.05 seconds. ( The shorter time being due to the connection pooling)
    time1=timer()
    set conn=createobject("adodb.connection")
    Conn.Open "dsn=oracleDSN;uid=yourusername;pwd=yourpassword"
    time2=timer()
    msgbox time2-time1
    conn.close
    set conn=nothing
    time1=timer()
    set conn=createobject("adodb.connection")
    Conn.Open "dsn=oracleDSN;uid=yourusername;pwd=yourpassword"
    time2=timer()
    msgbox time2-time1
    conn.close

    ODBC Connection Pooling is controlled by the ODBC Driver Manager and defaults to off for every driver on every platform. Have you enabled connection pooling for your driver in the ODBC Data Source Administrator?
    Justin
    Distributed Database Consulting, Inc.
    http://www.ddbcinc.com/askDDBC

  • Flash player not working with Facebook using IE 11

    I got a new computer windows 8.1 but flash player wont work with facebook; it keeps telling me to install flashplayer.  It is installed.  I verified that it is enable in add-ons and also Active x is turned off.  still wont play videos from facebook.  version 15 of flash player. using internet explorer version 11

    You'll probably need to add Facebook to compatibility mode:
    Fix site display problems with Compatibility View - Windows Help

  • HT3986 DVD is not working with bootcamp in windows 7

    Is there a link for DVD driver to work with windows 7 (using bootcamp)?  Thanks.

    it has to be plugged into the machine before you power on the machine, it is not hot swapable like on OSX
    does the screen work in OSX

  • Airport Express not working with printer on Windows, works fine on Macbook

    I have an airport express that is connected to my Brother laser printer. I installed the software and it works and prints fine on my macbook pro.
    I tried to also set it up using my Dell running Windows XP SP2, but after using the instructions, it looked like it set up fine and the printer is recognized, but when I try and print, it just gives me an error message that that printer is "busy or unable to print".
    Any ideas?

    Is there another solution to this problem? I have two PCs running WinXP and can not print with either one of them through Airport Express. Printing works fine with MacBook. I have Bonjour on both PCs and have run the setup wizard. The printer seems to be connecting and then hangs up on "communicating with printer."

  • Ios 8 not working with chevy link

    I upgraded my ipad 3 and iPhone 4S to IOS 8.  After the upgrade neither device works correctly in my Chevrolet vehicle via Chevy Link. Both devices worked perfectly with Chevy Link when I was using IOS7.
    When I plug in my ipad or Iphone it will connect and play songs but as soon as I select a playlist it displays an error message in my vehicle information screen.  When you click "OK" to clear the message the device is immediately disconnected from Chevy link and the radio goes back to XM.
    Any suggestions how to remedy the situation?  As I said before, all of my Apple devices worked perfectly under IOS7.

    After having the same problem with my 2013 Chevy Equinox, I did a factory reset of my iPhone 5s and re-installed IOS 8 from scratch.
    I used my iTunes backup to restore my apps, contacts, photo ..etc
    Since I did that, I was able to connect my phone via bluetooth to my Chevy Equinox, make phone calls, listen to music ..etc
    So far so good. I made about 10 calls, stopped the car, restarted the car and reconnected the phone and it worked.
    I wonder if the upgrade from IOS 7 to IOS 8 is not working properly and causing problems with Bluetooth. It seems that a full install after a factory reset fixed my problem.
    Hopefully, it is the end of the nightmare. Good luck.

Maybe you are looking for