Authentication against 2000 domain server

Is ther any way to authorize client using it's logon information, using the same domain server than the one used for login pourposes
Thanks in advance

Cisco Secure ACS 2.6 or higher should accomplish this for you.
http://www.cisco.com/univercd/cc/td/doc/product/access/acs_soft/csacs4nt/csnt26/jacsb26.htm

Similar Messages

  • VPN Tunnel w/ 802.1X port authentication against remote RADIUS server

    I have a Cisco 892 setup as a VPN client connecting to an ASA 5515-X.  The tunnel works fine and comes up if theirs correct traffic.  I have two RADIUS servers I want to use certificate based authentication to, that are located behind the ASA 5515-X.
    If I connect a computer that has the correct certificates to ports FA0 through 3, authentication won't work.  I'll see the following.  This happens even if the VPN tunnel is established already by doing something such as connecting a VOIP phone.  No entrys are located in the RADIUS logs, and I also cannot ping the RADIUS servers from VLAN10.
    *Jan 30 19:46:01.435: %RADIUS-4-RADIUS_DEAD: RADIUS server 192.168.1.100:1812,1813 is not responding.
    *Jan 30 19:46:01.435: %RADIUS-4-RADIUS_ALIVE: RADIUS server 192.168.1.100:1812,1813 is being marked alive.
    *Jan 30 19:46:21.659: %RADIUS-4-RADIUS_DEAD: RADIUS server 192.168.26.10:1812,1813 is not responding.
    *Jan 30 19:46:21.659: %RADIUS-4-RADIUS_ALIVE: RADIUS server 192.168.26.10:1812,1813 is being marked alive.
    If I connect a second PC to an interface with 802.1X disabled, such as FA6, the VPN tunnel will establish itself correctly.  In this situation, I can ping the RADIUS servers from VLAN10.  If I go ahead and connect another PC with correct certificates to a port with 802.1X enabled such as port FA0 through 3, then 802.1X will suceed.
    Current configuration : 6199 bytes
    ! Last configuration change at 15:40:11 EST Mon Feb 3 2014 by
    version 15.2
    service timestamps debug datetime msec
    service timestamps log datetime msec
    no service password-encryption
    hostname router1
    boot-start-marker
    boot-end-marker
    aaa new-model
    aaa local authentication default authorization default
    aaa authentication login default local
    aaa authentication dot1x default group radius
    aaa authorization network default group radius
    aaa session-id common
    clock timezone EST -5 0
    clock summer-time EDT recurring
    ip cef
    ip dhcp pool pool
    import all
    network 192.168.28.0 255.255.255.248
    bootfile PXEboot.com
    default-router 192.168.28.1
    dns-server 192.168.26.10 192.168.1.100 8.8.8.8 4.2.2.2
    domain-name domain.local
    option 66 ip 192.168.23.10
    option 67 ascii PXEboot.com
    option 150 ip 192.168.23.10
    lease 0 2
    ip dhcp pool phonepool
    network 192.168.28.128 255.255.255.248
    default-router 192.168.28.129
    dns-server 192.168.26.10 192.168.1.100
    option 150 ip 192.168.1.132
    domain-name domain.local
    lease 0 2
    ip dhcp pool guestpool
    network 10.254.0.0 255.255.255.0
    dns-server 8.8.8.8 4.2.2.2
    domain-name local
    default-router 10.254.0.1
    lease 0 2
    no ip domain lookup
    ip domain name remote.domain.local
    no ipv6 cef
    multilink bundle-name authenticated
    license udi pid CISCO892-K9
    dot1x system-auth-control
    username somebody privilege 15 password 0 password
    redundancy
    crypto isakmp policy 1
    encr aes 256
    authentication pre-share
    group 5
    crypto isakmp key secretpassword address 123.123.123.123
    crypto ipsec transform-set pix-set esp-aes 256 esp-sha-hmac
    mode tunnel
    crypto map pix 10 ipsec-isakmp
    set peer 123.123.123.123
    set transform-set pix-set
    match address 110
    interface BRI0
    no ip address
    encapsulation hdlc
    shutdown
    isdn termination multidrop
    interface FastEthernet0
    switchport access vlan 10
    switchport voice vlan 11
    no ip address
    authentication port-control auto
    dot1x pae authenticator
    spanning-tree portfast
    interface FastEthernet1
    switchport access vlan 10
    switchport voice vlan 11
    no ip address
    authentication port-control auto
    dot1x pae authenticator
    spanning-tree portfast
    interface FastEthernet2
    switchport access vlan 10
    switchport voice vlan 11
    no ip address
    authentication port-control auto
    dot1x pae authenticator
    spanning-tree portfast
    interface FastEthernet3
    switchport access vlan 10
    switchport voice vlan 11
    no ip address
    authentication port-control auto
    dot1x pae authenticator
    spanning-tree portfast
    interface FastEthernet4
    switchport access vlan 10
    switchport voice vlan 11
    no ip address
    spanning-tree portfast
    interface FastEthernet5
    switchport access vlan 12
    switchport voice vlan 11
    no ip address
    spanning-tree portfast
    interface FastEthernet6
    switchport access vlan 10
    switchport voice vlan 11
    no ip address
    spanning-tree portfast
    interface FastEthernet7
    switchport access vlan 10
    switchport voice vlan 11
    no ip address
    authentication port-control auto
    dot1x pae authenticator
    spanning-tree portfast
    interface FastEthernet8
    no ip address
    shutdown
    duplex auto
    speed auto
    interface GigabitEthernet0
    ip address dhcp
    ip nat outside
    ip virtual-reassembly in
    duplex auto
    speed auto
    crypto map pix
    interface Vlan1
    no ip address
    interface Vlan10
    ip address 192.168.28.1 255.255.255.248
    ip nat inside
    ip virtual-reassembly in
    interface Vlan11
    ip address 192.168.28.129 255.255.255.248
    interface Vlan12
    ip address 10.254.0.1 255.255.255.0
    ip nat inside
    ip virtual-reassembly in
    ip forward-protocol nd
    ip http server
    ip http authentication local
    ip http secure-server
    ip nat inside source list 101 interface GigabitEthernet0 overload
    ip route 0.0.0.0 0.0.0.0 dhcp
    ip radius source-interface Vlan10
    ip sla auto discovery
    access-list 101 deny   ip 192.168.28.0 0.0.0.255 192.168.0.0 0.0.255.255
    access-list 101 permit ip 192.168.28.0 0.0.0.255 any
    access-list 101 permit ip 10.254.0.0 0.0.0.255 any
    access-list 110 permit ip 192.168.28.0 0.0.0.255 192.168.0.0 0.0.255.255
    access-list 110 permit ip 192.168.29.0 0.0.0.255 192.168.0.0 0.0.255.255
    radius-server host 192.168.1.100 auth-port 1812 acct-port 1813 key secretkey
    radius-server host 192.168.26.10 auth-port 1812 acct-port 1813 key secretkey
    control-plane
    mgcp profile default
    line con 0
    line aux 0
    line vty 0 4
    transport input all
    ntp source FastEthernet0
    ntp server 192.168.26.10
    ntp server 192.168.1.100
    end

    I have 802.1X certificate authentication enabled on the computers.  As described in my post above, authentication will work if theirs another device on the same VLAN that is connected to a port that bypasses authentication.  It seems like I have a chicken and egg scenario, a device needs to be sucessfully connected to VLAN10 before the router will use it's VLAN10 interface to communicate with my remote RADIUS server.

  • Problem authenticating against FreeBSD NIS Server

    Hello,
    We are having problems authenticating Oracle Linux 5.7 32 bits agains a FreeBSD NIS Server, which works without problems with another Linux (CentOS, Gentoo...)
    Our Oracle Linux server binds without problems to the NIS domain and we can retrieve all the maps, but when we try to login using ssh, gdm or in console we get that the password is incorrect...
    Any clues on what is happening?

    Hello, i finally have discovered what was happening, it has to be with the way FreeBSD passes the password field. By default FreeBSD passes the password field with a '*' while Oracle Linux (and Red Hat clones) expect an 'x' to look into shadow maps (Linux uses the '*' character in the password file to not allow login to that user).
    To solve it the password field served by the NIS server must be substituted, which is accomplished with nsswitch.conf and adding a line to the /etc/password file on the NIS Client, so the final files will look this way:
    # nsswitch.conf (compat directive allows us to use the '+' sintaxis in /etc/passwd file)
    passwd files compat
    # /etc/passwd (just add at the end of file)
    +:x:::::

  • User Authentication against NT Domain

    Hi Expert
    I want to code a program which ask for my user id and password and then
    authenticate it from my NT domain, mean verigy that am I a valid user or not ? If yes then is my password correct ?
    Any one who can give me some help to start ? I believe it can be done but I don't know how and what are the functions and libraries available to do so.
    Any help will be appreciated.
    Thanks
    -- Kashif Ahmed
    [email protected]

    Create an intial context to the Directory Server using Basic Authentication. You will have to pass the username and password (which for ADS is userPrincipalName or domain\username). As long as you do not get an AuthenticationException then your user is "Authenticated". Just remember the security implications, the password is sent in plain text.

  • Authentication against NT Domain

    Hi Expert
              I want to code a program which ask for my user id and password and then
              authenticate it from my NT domain, mean am I a valid user or not ? If yes
              then is my password correct ?
              Any one who can give me some help to start ? can a servlet do this all stuff
              for me ?
              Any help will be appreciated.
              Thanks
              -- Ali
              

              Hi,
              I am solving the same problem. There is a product called JCSI Single Sign-On that
              should provide the authentication support for Windows clients based on the Active
              Directory. If I understand it well. The browser (IE) will send a Kerberos ticket
              to the server (SPNEGO) and the server will consider it as a authenticated principal.
              However I don't know anything more at this moment.
              If you find someting out, let us pls. know.
              Zdenek
              "Ali" <[email protected]> wrote:
              >Hi Expert
              >
              >I want to code a program which ask for my user id and password and then
              >authenticate it from my NT domain, mean am I a valid user or not ? If
              >yes
              >then is my password correct ?
              >
              >Any one who can give me some help to start ? can a servlet do this all
              >stuff
              >for me ?
              >
              >Any help will be appreciated.
              >Thanks
              >
              >-- Ali
              >
              

  • Ubuntu Karmic authentication against Snow leopard open directory server

    Hi,
    I'm looking for help. I've tried to configure an installation of Karmic to authenticate against our office's open directory server running on an osx snow leopard server. Currently `getent password` show all users including those from the open directory server when running the command as both root and normal users. However authentication against the open directry users fails with the following messages in the /var/log/auth.log:-
    Dec 7 22:42:05 [hostname] getent: nss_ldap: failed to bind to LDAP server ldap://server.domain.com: Invalid credentials
    Dec 7 22:42:05 [hostname] getent: nss_ldap: could not search LDAP server - Server is unavailable
    (I've changed the hostname and ldap url)
    /etc/ldap.conf has:-
    base dc=server,dc=domain,dc=com
    ldap_version 3
    rootbinddn cn=diradmin,dc=server,dc=domain,dc=com
    bind_policy soft
    pam_password md5
    /etc/ldap.secret is set to the password of the diradmin user and has a permission mask of 600
    /etc/pam.d/common-passwd :-
    password sufficient pam_ldap.so md5
    password required pam_unix.so nullok obscure md5
    password optional pam_smbpass.so nullok use_authtok tryfirstpass missingok
    /etc/pam.d/common-auth:-
    auth [success=2 default=ignore] pam_unix.so nullok_secure
    auth [success=1 default=ignore] pam_ldap.so usefirstpass
    auth requisite pam_deny.so
    auth required pam_permit.so
    /etc/pam.d/common-account:-
    account [success=2 newauthtokreqd=done default=ignore] pam_unix.so
    account [success=1 default=ignore] pam_ldap.so
    account requisite pam_deny.so
    account required pam_permit.so
    /etc/pam.d/common-session
    session [default=1] pam_permit.so
    session requisite pam_deny.so
    session required pam_permit.so
    session required pam_unix.so
    session optional pam_ldap.so
    session optional pamckconnector.so nox11
    Does anyone have any ideas where to go from here?
    Message was edited by: zebardy

    Hi
    It's easy enough to 'connect' any version of OS X Server to any other version of OS X Server. Use the Join button in the Users & Groups Preferences Pane. Alternatively use the Directory Utility itself.
    You seem to be misunderstanding what an Open Directory Master and Replica are? They are not what I think you think they are. They are not a 'back-up' of each other if you're providing more than the shared Directory Service.
    An OD Replica maintains a read-only copy of the LDAP Database (Usernames, Passwords and Policies etc) that's stored on the OD Master and nothing more. If the Master was to go offline for any reason the Replica can be quickly promoted to a Master Role and continue to provide information for the shared directory. This assumes it has easy and quick access to the Volume storing networked home folders? The LDAP Database in that case would then become writable. Later on and whenever you've fixed the problem with the old Master it can quickly be demoted and made a Replica of the now new Master.
    Although this is for 10.6 Server (it is nevertheless still applicable) everything you need to know about Master and Replica relationships is here:
    http://manuals.info.apple.com/en_US/OpenDirAdmin_v10.6.pdf
    Page 55 onwards.
    From Page 64:
    "The Open Directory master and its replicas must use the same version of Mac OS X Server. . ."
    If your OD Master is also providing Mail, Calendar and Contact Services then none of these will be replicated. You will have to maintain a backup of these databases yourself using whatever method you deem fit for your needs.
    HTH?
    Tony

  • Anybody done USERID/PASSWORD authentication against aWindows NT Domain

    I think I'll have to write a C++ Program to the WinNT API to do it
    (LogonUser). Then I'll wrap it with a service object for authentication. Has
    it been done before? Or something similar? We want to validate users against
    a WindowsNT Server DOMAIN.
    -martin ([email protected])

    Hi Martin & All,
    Yes you are right, wrap the API in C++/C then write a PEX file for interface to Fort&eacute; and use the method to invoke the WinNT API authentication. Do not forget to validate the return values from the methods. They are very crucial in handling exceptions etc., in forte.
    I've done the same to provide the mail user authentication in MAPI API wrapper for Fort&eacute;.
    Is this what you looking for????
    Regards,
    Sivaram S Ghorakavi mailto:[email protected]
    International Business Corporation http://www.ibcweb.com/
    From: Martin G Nystrom
    Sent: Wednesday, November 26, 1997 1:53 PM
    To: [email protected]
    Subject: Anybody done USERID/PASSWORD authentication against a Windows NTDomain?
    I think I'll have to write a C++ Program to the WinNT API to do it
    (LogonUser). Then I'll wrap it with a service object for authentication. Has
    it been done before? Or something similar? We want to validate users against
    a WindowsNT Server DOMAIN.
    -martin ([email protected])

  • "Sharepoint 2013" is giving error that prevents local domain users authentication for "Team Foundation Server"

    I am getting 2 errors through the event viewer that prevents TFS 2013 authentication for local domain users, also this error started appearing after having TFS upgraded to [ 12.0.30723.0 (Tfs2013.Update3) ].
    1st Error (from administrative events):
    The Execute method of job definition Microsoft.SharePoint.Administration.SPUsageImportJobDefinition (ID a51a0244-765d-433b-8502-0bb0540ad1fd) threw an exception. More information is included below.
    Access to the path 'C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS' is denied.
    Tried so far:-
    - changed the path to another folder from "Diagnostic Logging" in another drive, but still getting the same error.
    2nd Error (from application server):
    DistributedCOM error
    The application-specific permission settings do not grant Local Activation permission for the COM Server application with CLSID 
    {000C101C-0000-0000-C000-000000000046}
     and APPID 
    {000C101C-0000-0000-C000-000000000046}
     to the user NT AUTHORITY\NETWORK SERVICE SID (S-1-5-20) from address LocalHost (Using LRPC). This security permission can be modified using the Component Services administrative tool.
    Which I already got fixed using the following steps on a thread I opened before (but still getting the same error).
    https://social.technet.microsoft.com/Forums/windows/en-US/3896e35c-b99a-4d30-b662-f92d337c8d6f/windows-servers-components-services-and-regedit-permissions-are-grayed-out-for-my-admin-account?forum=winservergen
    Other Fixes I tried
    - Found on another topic that it is not sharepoint that is causing the problem, but it is the generated ASP.NET web pages used for testing is causing the memory to fill up due to cashing on RAM, the fix suggested to change IIS cashing from RAM to HD to prevent
    loading up using w3wp.exe from processes. 
    Concern
    - by checking other topics for people having the same problem, it was mentioned that this error appeared after the lastest TFS update, is there is a fix for it ?

    Hi Kpdn, 
    Thanks for your post.
    All your participation and support are very important to build such harmonious/ pleasant / learning environment for MSDN community.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Oracle 10g Reports Server - problem authenticating against DB

    I have a problem with Oracle 10g Reports server authenticating against an Oracle RDBMS.
    When I try to run reports, an authentication form screen is presented, with the password field empty (the URL in explorer that loads this page contains the username and DB instance, but is missing the password) and the following error message:
    REP-51018: Need database user authentication
    When the password is entered into the empty field in the form and submitted, another 2 authentication errors are given.
    REP-51018: Need database user authentication
    REP-12545: java.sql.SQLException: ORA-12545: Connect failed because target host or object does not exist
    When the URL in the browser location field is manually altered to include the DB password, the reports are authenticated fine.
    Any ideas which config file I should be looking in?
    Any pointers would, of course, be much appreciated.
    thanks,
    Brian

    Hello, i finally have discovered what was happening, it has to be with the way FreeBSD passes the password field. By default FreeBSD passes the password field with a '*' while Oracle Linux (and Red Hat clones) expect an 'x' to look into shadow maps (Linux uses the '*' character in the password file to not allow login to that user).
    To solve it the password field served by the NIS server must be substituted, which is accomplished with nsswitch.conf and adding a line to the /etc/password file on the NIS Client, so the final files will look this way:
    # nsswitch.conf (compat directive allows us to use the '+' sintaxis in /etc/passwd file)
    passwd files compat
    # /etc/passwd (just add at the end of file)
    +:x:::::

  • ISE and authenticating against Windows AD with RADIUS realm that is different from the Windows domain

    Hello
    We are in the process of evaluating the Cisco ISE VMWare appliance with a view to replace our existing FreeRADIUS installation as authentication provider for our wireless network and VPN service. As a part of this we are hoping to migrate our user authentication to Microsoft Active Directory - we have previously authenticated against a different identity store (not MS AD).  Because of this legacy our Windows domain is not the same as our RADIUS realm name - the Windows domain is "win.mydomain" whereas we wish to allow users to authenticate using "username@mydomain" or even "[email protected]" as they are doing today. We are experiencing an issue where authentication requests with the format "[email protected]" will be forwarded to the Windows AD whereas authentication requests with the format "username@mydomain" will fail with the log message "User not found in Active Directory". We do not know if the ISE itself is validating the username and triggering this error, or if the error originates from AD. We suspect the that the ISE is not even asking AD because "win.mydomain" is the domain configured in "Active Directory" in "External Identity Sources".
    Authentication requests against the AD without a realm are successful (that is, using only "username"). With this in mind we located a post on the Cisco support forums that described a process of proxying the request back to the ISE and strip the realm information, but this was specific for the ACS platform. We have attempted to implement this solution but it is still not working as we would have hoped, and we are not entirely certain where the fault might lie. We are currently using PEAP with MSCHAPv2 for authentication in our WLAN where the main problem is. We suspect that the "proxy-to-self" with realm stripping is an issue with PEAP.
    Is there a supported method of achieving our goal, or should we abandon the ISE platform as our scenario is simply not supported?

    Seems like your issue maybe related to DNS, when ISE receives the format [email protected], the dns request is failing. However, there is a setting for alternate UPN Suffixes that can be configured to include domain.com and student.domain.com.
    Here is a windows article that should fix this for you. Once you get this updated please reboot ISE so it rejoins AD. Try your tests again.
    http://technet.microsoft.com/en-us/library/cc772007.aspx
    Thanks,
    Tarik Admani
    *Please rate helpful posts*

  • Domain trying to validate against an incorrect server

    Hi Guys,
    I have a hosted exhcange cluster that has many many many domains all administered by a DC where each domain is an OU under a main OU called Hosting.
    For some reason, a few mailboxes of a certain OU (not all the mailboxes) are tryong to validate against the domain associated with that OU. Meaning that if for example, The people in that OU has a domain called abcd.com and my mailserver is myexchange.com,
    Those specific mailboxes are triying to connect to abcd.com and not to the mail server. I can't think of anything that might cause such a bizzare error. Any ideas?

    Still I think, I need more info/not able to understand the real issue :)
    1. Are you facing the autoconfiguration issue for other mailboxes also?
    2. Do you have Outlook anywhere enabled? If so, do an outlook connectivity test through
    www.testconnectivity.Microsoft.com
    3. if the domain name selection box is grayed out, still you can enter the name like domainname\username and password
    Regards from Visit ExchangeOnline |
    Visit WindowsAdmin
    1) No, only some mailboxes on this specific domain.
    2) The connectivity test passed succesfully
    3) It shoudln't be connecting to a domain to begin with, it lists their domain as the server it tries to connect to! it should be connecting to the exchange server and no the client's FQDN.

  • How to bypass from OAM authentication for certain domain

    Hi All,
    We are trying to unprotect certain domain from OAM domain but coudn't. Please help us fix this issue.
    Environement details:
    We have two nodes, one node for OAM_OSSO and another one for OSSO_Portal application.
    OAM server details:
    In this server, oracle application server single sign on(services are HTTP, OC4J, and OID) and OAM. Integrated OAM_OSSO using [ID 979827.1]
    Portal server details:
    In this server, oracle application server single sign on(services are HTTP, OC4J, and OID) and portal weblogic server(portal application) is running. portal weblogic is registered with thier own portal OSSO.
    In OAM, We protected following portal url's
    /sso/auth      
    /pls/orasso/orasso.wwsso_app_admin.ls_login
    portal _OAM integration is working fine.
    Now portal team come with new requirement for customer, application also running in their same portal weblogic server and that portal application domain is alreday registered with Portal OSSO and Portal OSSO page is protected by OAM. the requirement is bypass OAM authentication, and need to authentication against their own portal OSSO+OID.
    Please tell me how to bypass OAM authentication from this scenerio.
    -Sarath

    Hi MD,
    Thanks for your update.
    We are using oracle 10g. Please tell me how Anonymous scheme will help us to get out from this issue.
    Portal Weblogic server registered with portal IDM server and portal IDM server OSSO protected by IDM OAM. So if i tried any of the application which deployed under portal weblogic server will get protected by OAM right. Please correct me if iam wrong.
    In this scenerio we have two OSSO, one in OAM node and another one in portal server. Now portal team come up with new webserver domain for customer, in customer scenerio we want authenticate againt portal OSSO with their own OID rather than using OAM authentication. Here my concern is, customer or employee the portal weblogic server and portal OSSO are common for both user but only difference in webserver domain.
    So if i tried to access customer application, then customer webserver redirect to portal weblogic for open the requested page(note if webgate not in picture). portal weblogic server is register with portal OSSO and its redirect to portal OSSO for authentication but Portal OSSO server integrated with OAM using webgate.
    1. When tried to access customer application ,Portal OSSO server tried to show own sso login page for authentication but Portal OSSO server already integrated with OAM. so portal OSSO server requested to OAM to access portal sso login page not the request of customer page login.
    2. here,portal OSSO login page protected and OAM serve login page for OAM authentication against OAM OID. If i specify anonymous scheme for customer domain then how will work here, portal OSSO requested to OAM to access portal OSSO login page not the customer page or employee page...
    Here OAM authentication will come into picture for all scenario but need bypass for customer login.
    Requirement is when customer trying to access then authentication need to happen in portal OSSO not in OAM. Hope you understand the architecture.Please suggest how.
    -Sarath
    Edited by: 898990 on May 11, 2012 8:22 PM
    Edited by: 898990 on May 11, 2012 8:25 PM

  • ISE 1.1 - 24492 Machine authentication against AD has failed

    We implement Cisco ISE 802.1X and Machine Authentication With EAP-TLS.
    Authentication Summary
    Logged At:
    March 11,2015 7:00:13.374 AM
    RADIUS Status:
    RADIUS Request dropped : 24492 Machine authentication against Active Directory has failed
    NAS Failure:
    Username:
    [email protected]
    MAC/IP Address:
    00:26:82:F1:E6:32
    Network Device:
    WLC : 192.168.1.225 :  
    Allowed Protocol:
    TDS-PEAP-TLS
    Identity Store:
    AD1
    Authorization Profiles:
    SGA Security Group:
    Authentication Protocol :
    EAP-TLS
     Authentication Result
    RadiusPacketType=Drop
     AuthenticationResult=Error
     Related Events
     Authentication Details
    Logged At:
    March 11,2015 7:00:13.374 AM
    Occurred At:
    March 11,2015 7:00:13.374 AM
    Server:
    ISE-TDS
    Authentication Method:
    dot1x
    EAP Authentication Method :
    EAP-TLS
    EAP Tunnel Method :
    Username:
    [email protected]
    RADIUS Username :
    host/LENOVO-PC.tdsouth.com
    Calling Station ID:
    00:26:82:F1:E6:32
    Framed IP Address:
    Use Case:
    Network Device:
    WLC
    Network Device Groups:
    Device Type#All Device Types,Location#All Locations
    NAS IP Address:
    192.168.1.225
    NAS Identifier:
    WLC-TDS
    NAS Port:
    4
    NAS Port ID:
    NAS Port Type:
    Wireless - IEEE 802.11
    Allowed Protocol:
    TDS-PEAP-TLS
    Service Type:
    Framed
    Identity Store:
    AD1
    Authorization Profiles:
    Active Directory Domain:
    tdsouth.com
    Identity Group:
    Allowed Protocol Selection Matched Rule:
    TDS-WLAN-DOT1X-EAP-TLS
    Identity Policy Matched Rule:
    Default
    Selected Identity Stores:
    Authorization Policy Matched Rule:
    SGA Security Group:
    AAA Session ID:
    ISE-TDS/215430381/40
    Audit Session ID:
    c0a801e10000007f54ffe828
    Tunnel Details:
    Cisco-AVPairs:
    audit-session-id=c0a801e10000007f54ffe828
    Other Attributes:
    ConfigVersionId=7,Device Port=32768,DestinationPort=1812,RadiusPacketType=AccessRequest,Protocol=Radius,Framed-MTU=1300,State=37CPMSessionID=c0a801e10000007f54ffe828;30SessionID=ISE-TDS/215430381/40;,Airespace-Wlan-Id=1,CPMSessionID=c0a801e10000007f54ffe828,EndPointMACAddress=00-26-82-F1-E6-32,GroupsOrAttributesProcessFailure=true,Device Type=Device Type#All Device Types,Location=Location#All Locations,Device IP Address=192.168.1.225,Called-Station-ID=e0-d1-73-28-a7-70:TDS-Corp
    Posture Status:
    EPS Status:
     Steps
    11001  Received RADIUS Access-Request
    11017  RADIUS created a new session
    Evaluating Service Selection Policy
    15048  Queried PIP
    15048  Queried PIP
    15048  Queried PIP
    15048  Queried PIP
    15004  Matched rule
    11507  Extracted EAP-Response/Identity
    12500  Prepared EAP-Request proposing EAP-TLS with challenge
    11006  Returned RADIUS Access-Challenge
    11001  Received RADIUS Access-Request
    11018  RADIUS is re-using an existing session
    12502  Extracted EAP-Response containing EAP-TLS challenge-response and accepting EAP-TLS as negotiated
    12800  Extracted first TLS record; TLS handshake started
    12805  Extracted TLS ClientHello message
    12806  Prepared TLS ServerHello message
    12807  Prepared TLS Certificate message
    12809  Prepared TLS CertificateRequest message
    12505  Prepared EAP-Request with another EAP-TLS challenge
    11006  Returned RADIUS Access-Challenge
    11001  Received RADIUS Access-Request
    11018  RADIUS is re-using an existing session
    12504  Extracted EAP-Response containing EAP-TLS challenge-response
    12505  Prepared EAP-Request with another EAP-TLS challenge
    11006  Returned RADIUS Access-Challenge
    11001  Received RADIUS Access-Request
    11018  RADIUS is re-using an existing session
    12504  Extracted EAP-Response containing EAP-TLS challenge-response
    12505  Prepared EAP-Request with another EAP-TLS challenge
    11006  Returned RADIUS Access-Challenge
    11001  Received RADIUS Access-Request
    11018  RADIUS is re-using an existing session
    12504  Extracted EAP-Response containing EAP-TLS challenge-response
    12505  Prepared EAP-Request with another EAP-TLS challenge
    11006  Returned RADIUS Access-Challenge
    11001  Received RADIUS Access-Request
    11018  RADIUS is re-using an existing session
    12504  Extracted EAP-Response containing EAP-TLS challenge-response
    12571  ISE will continue to CRL verification if it is configured for specific CA
    12571  ISE will continue to CRL verification if it is configured for specific CA
    12811  Extracted TLS Certificate message containing client certificate
    12812  Extracted TLS ClientKeyExchange message
    12813  Extracted TLS CertificateVerify message
    12804  Extracted TLS Finished message
    12801  Prepared TLS ChangeCipherSpec message
    12802  Prepared TLS Finished message
    12816  TLS handshake succeeded
    12509  EAP-TLS full handshake finished successfully
    12505  Prepared EAP-Request with another EAP-TLS challenge
    11006  Returned RADIUS Access-Challenge
    11001  Received RADIUS Access-Request
    11018  RADIUS is re-using an existing session
    12504  Extracted EAP-Response containing EAP-TLS challenge-response
    Evaluating Identity Policy
    15006  Matched Default Rule
    24433  Looking up machine/host in Active Directory - [email protected]
    24492  Machine authentication against Active Directory has failed
    22059  The advanced option that is configured for process failure is used
    22062  The 'Drop' advanced option is configured in case of a failed authentication request
    But the user can authenticated by EAP-TLS
    AAA Protocol > RADIUS Authentication Detail
    RADIUS Audit Session ID : 
    c0a801e10000007f54ffe828
    AAA session ID : 
    ISE-TDS/215430381/59
    Date : 
    March     11,2015
    Generated on March 11, 2015 2:48:43 PM ICT
    Actions
    Troubleshoot Authentication 
    View Diagnostic MessagesAudit Network Device Configuration 
    View Network Device Configuration 
    View Server Configuration Changes
    Authentication Summary
    Logged At:
    March 11,2015 7:27:32.475 AM
    RADIUS Status:
    Authentication succeeded
    NAS Failure:
    Username:
    [email protected]
    MAC/IP Address:
    00:26:82:F1:E6:32
    Network Device:
    WLC : 192.168.1.225 :  
    Allowed Protocol:
    TDS-PEAP-TLS
    Identity Store:
    AD1
    Authorization Profiles:
    TDS-WLAN-PERMIT-ALL
    SGA Security Group:
    Authentication Protocol :
    EAP-TLS
     Authentication Result
    [email protected]
     State=ReauthSession:c0a801e10000007f54ffe828
     Class=CACS:c0a801e10000007f54ffe828:ISE-TDS/215430381/59
     Termination-Action=RADIUS-Request
     cisco-av-pair=ACS:CiscoSecure-Defined-ACL=#ACSACL#-IP-PERMIT_ALL_TRAFFIC-508adc03
     MS-MPPE-Send-Key=5a:9a:ca:b0:0b:2a:fe:7d:fc:2f:8f:d8:96:25:50:bb:c8:7d:91:ba:4c:09:63:57:3e:6e:4e:93:5d:5c:b0:5d
     MS-MPPE-Recv-Key=24:fa:8d:c3:65:94:d8:29:77:aa:71:93:05:1b:0f:a5:58:f8:a2:9c:d0:0e:80:2d:b6:12:ae:c3:8c:46:22:48
     Airespace-Wlan-Id=1
     Related Events
     Authentication Details
    Logged At:
    March 11,2015 7:27:32.475 AM
    Occurred At:
    March 11,2015 7:27:32.474 AM
    Server:
    ISE-TDS
    Authentication Method:
    dot1x
    EAP Authentication Method :
    EAP-TLS
    EAP Tunnel Method :
    Username:
    [email protected]
    RADIUS Username :
    [email protected]
    Calling Station ID:
    00:26:82:F1:E6:32
    Framed IP Address:
    Use Case:
    Network Device:
    WLC
    Network Device Groups:
    Device Type#All Device Types,Location#All Locations
    NAS IP Address:
    192.168.1.225
    NAS Identifier:
    WLC-TDS
    NAS Port:
    4
    NAS Port ID:
    NAS Port Type:
    Wireless - IEEE 802.11
    Allowed Protocol:

    Hello,
    I am analyzing your question and seeing the ISE logs i can see that the machine credentials was LENOVO-PC. Do you have shure that these credentials has in your Active Directory to validate this machine ? The machine certificate has the correct machine credentials from the domain ? The group mapped in the ISE rule has the machine inside this group ?
    Differently from the user authentication that happens with success because the domain credentials can be validate from the Active Directory and get access to the network.

  • RADIUS Authentication Problems with NPS Server Eventid 6274

    Hi,
    We have struggled for a while with RADIUS auth for some clients against an NPS Server when the user or computer tries to connect to the wireless network the following error can be seen on the NPS server:
    Network Policy Server discarded the request for a user
    Contact the Network Policy Server administrator for more information.
    User:
        Security ID:            NULL SID
        Account Name:            host/hostname.domainname.com
        Account Domain:            -
        Fully Qualified Account Name:    -
    Client Machine:
        Security ID:            NULL SID
        Account Name:            -
        Fully Qualified Account Name:    -
        OS-Version:            -
        Called Station Identifier:        40-20-B1-F4-BB-15:Wireless-SSID
        Calling Station Identifier:        C1-18-85-08-10-E1
    NAS:
        NAS IPv4 Address:        192.168.10.10
        NAS IPv6 Address:        -
        NAS Identifier:            AP name
        NAS Port-Type:            Wireless - IEEE 802.11
        NAS Port:            0
    RADIUS Client:
        Client Friendly Name:        name
        Client IP Address:            192.168.10.10
    Authentication Details:
        Connection Request Policy Name:    Secure Wireless Connections
        Network Policy Name:        -
        Authentication Provider:        Windows
        Authentication Server:        NPS servername
        Authentication Type:        -
        EAP Type:            -
        Account Session Identifier:        -
        Reason Code:            3
        Reason:                The RADIUS Request message that Network Policy Server received from the network access server was malformed.
    Network Policy Server discarded the request for a user.
    Contact the Network Policy Server administrator for more information.
    User:
        Security ID:            NULL SID
        Account Name:            domainname\username
        Account Domain:            -
        Fully Qualified Account Name:    -
    Client Machine:
        Security ID:            NULL SID
        Account Name:            -
        Fully Qualified Account Name:    -
        OS-Version:            -
        Called Station Identifier:        20-18-B1-F4-BB-15:Wireless-SSID
        Calling Station Identifier:        09-3E-8E-3E-5A-C9
    NAS:
        NAS IPv4 Address:        192.168.10.10
        NAS IPv6 Address:        -
        NAS Identifier:            AP name
        NAS Port-Type:            Wireless - IEEE 802.11
        NAS Port:            0
    RADIUS Client:
        Client Friendly Name:        name
        Client IP Address:            192.168.10.10
    Authentication Details:
        Connection Request Policy Name:    Secure Wireless Connections
        Network Policy Name:        -
        Authentication Provider:        Windows
        Authentication Server:        NPS server name
        Authentication Type:        -
        EAP Type:            -
        Account Session Identifier:        -
        Reason Code:            3
        Reason:                The RADIUS Request message that Network Policy Server received from the network access server was malformed.
    Message seen from the AP's logs:
    (317)IEEE802.1X auth is starting (at if=wifi0.2)
    (318)Send message to RADIUS Server(192.168.60.166): code=1 (Access-Request) identifier=157 length=162,  User-Name=domain\username NAS-IP-Address=192.168.10.10 Called-Station-Id=40-18-B1-F4-BB-15:Wireless-SSID Calling-Station-Id=C0-18-85-08-10-E1
    (319)Receive message from RADIUS Server: code=11 (Access-Challenge) identifier=157 length=90
     (320)Send message to RADIUS Server(192.168.60.166): code=1 (Access-Request) identifier=158 length=286,  User-Name=domain\username NAS-IP-Address=192.168.10.10 Called-Station-Id=40-18-B1-F4-BB-15:Wireless-SSID Calling-Station-Id=C0-18-85-08-10-E1
     (321)Send message to RADIUS Server(192.168.60.166): code=1 (Access-Request) identifier=161 length=162,  User-Name=domain\username NAS-IP-Address=192.168.10.10 Called-Station-Id=40-18-B1-F4-BB-15:Wireless-SSID Calling-Station-Id=C0-18-85-08-10-E1
     (322)Receive message from RADIUSServer: code=11 (Access-Challenge) identifier=161 length=90 BASIC  
    Output omitted
    (330)Sta(at if=wifi0.2) is de-authenticated because of notification of driver
    We have other NPS Servers with corresponding policy settings which are working so I am having trouble to understand why this errors occurs.
    Initally the problem seemed to be related to the Cert on the NPS server cause it used the cert generated from the Somputer template. Now it uses the template for Domain controller just as the other NPS servers so this should not be the issue(Not sure if
    this matters?)
    Please guide me on how to take this further
    Thank you :)
    //Cris

    Hi,
    NPS Event ID: 6274.
    This condition occurs when the NPS discards accounting requests because the structure of the accounting request message that was sent by a RADIUS client does not comply with the RADIUS protocol. You should reconfigure, upgrade, or replace the RADIUS client.
    Detailed information reference：
    Event ID 6274 — NPS Accounting Request Message Processing
    https://technet.microsoft.com/en-us/library/cc735339(v=WS.10).aspx
    Best Regards,
    Eve Wang
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • ISE with per-windows 2000 domain

    Hi
    I am experiencing a problem with AD authentication.
    I have joined the ISE appliance to the windows AD and I can browse the groups and attributes.
    But the problem I am experincing is that the users logon to the domain using the pre-windows 2000 domain name.
    FQDN format : ab.cdef.com       - ISE is joined to this
    pre-windows 2000 name : abcd  - Users logon with this
    So wen the users authenticate I get the following error : 22056 Subject not found in the applicable identity store.
    Also tried to logon with [email protected] with no luck.
    Does someone have any suggestions?
    Thanks

    The 802.11 Mac Layer is a bit longer than the ethernet mac layer. This sometimes cause problem with domain login because they are done using UDP by default. The frame are sometime drop. To test if this is your problem, I recomand changing the MTU on the 2000server(DC) and the host to something lesser than the actuel MTU on the interface. (configure the DC and host @1300 leaving the network @1500)
    A Windows 2003 server as a default mtu of 13?? something to get around this problem. I usaully tell my users to install the cisco vpn client if they want to use domain in wireless because the installation of this client lower the MTU of every interface to 1300.
    Another path you can look into is forcing kerberos to use TCP insted of UDP. (look on MS TechNet for method)

Maybe you are looking for

  • Will not open new tab when clicked on the + next to open page

    firefox does not open new window when I click on the new tab + also does not open new tab when going through the file menu

  • Website building

    I am new to this game and was wondering can i build a fully functioning professional website to sell things on with dreamweaver cs3 if so were can i get help. I need to start from scratch and the only thing i have found is how to build a personal one

  • Navigation rollovers shift tables/images - why?

    Hi, I'm using FW CS3 and DW CS3 and I'm on a 24" iMac. These sites are driving me nuts with the IE 7 browser. In BOTH cases, the navigation rollover effect somehow causes the table or image to shift. Note: I use tables to create my websites. This ONL

  • Field level validation

    I was looking at the Add/Modify Customer page – page 7 in the Sample Application which can be loaded into Oracle XE and was surprised to discover that there doesn't seem to be any field validation. For example customer first name is set to varchar2(2

  • Thesaurus Usage

    Hello, I am creating a scientific catalaguing web application using Oracle 10g. My customers want to control the user input by providing thesauri. For example: They want to enter the type of plant by selecting from a list. What they demand is the usa