Authentication disable for Lotes Notes

Hi,
We are facing a problem where we cant see the images coming within email (Lotus Notes). I have configured proxy setting in lotus notes but we want to disable authentication when request coming through lotus notes browser.
I think this can be possible with user agent, does any one have idea about what could be user agent of lotus notes 8.0. i have tried below user agent but no success...
Mozilla/4.0 (compatible; Lotus-Notes/6.0; Windows-NT)
Mozilla/4.0 (compatible; Lotus-Notes/5.0; Windows-NT)
Please suggest on this...

Hi,
to find out the user agent
you could put in %u in the Log Subscription --> accesslog --> Custom Field
then you can see what user agent trys to connect as I know.
Regards
Achim

Similar Messages

NAM 3.2.1 Custom Authentication Class for BASIC not loaded

Hi!
Im trying to write a custom authentication class for
BASIC/PROTECTED_BASIC, so I started with the PasswordClass sample from
SDK novell-nacm3_2-devel-2012.08.10.tar.gz, stripped out the
STSAuthenticationClass and changed the type to
AuthnConstants.PROTECTED_PASSWORD --> and it works!
public String getType() {
return AuthnConstants.PROTECTED_PASSWORD;
Next I wanted to create a custom BASIC auth class by changing the type
to AuthnConstants.BASIC / AuthnConstants.PROTECTED_BASIC
public String getType() {
return AuthnConstants.PROTECTED_BASIC;
but now IDP complains about the unsupported type.
<amLogEntry> 2012-12-20T15:11:17Z WARNING NIDS Application:
AM#300105006: AMDEVICEID#FC77EC2A45509E7B: Failed to load
authentication class due to unsupported type: ITdBasicTestClass
</amLogEntry>
Im running NAM 3.2.1 single box appliance for development/testing.
There is an old thread here, that looks like the same issue:
http://tinyurl.com/c6eawj6
Any hits?
regards
Thomas
PS: What i really want to solve is strip out the Domain from the
username on basic authentication since most MS apps/clients provide the
username in format DOMAIN\USER...
reibenwein
reibenwein's Profile: https://forums.netiq.com/member.php?userid=1382
View this thread: https://forums.netiq.com/showthread.php?t=46430

hmmm, well try writing the value out to stderr and see if you can at least make sure you are getting
a good read.
Like a System.out.println(AuthnConstants.PROTECTED_PASSWO RD);
I ran into some strange stuff where some constants had no values for no apparent reason when they
should.
I would also try supplying the actual value instead of the constant and see if it goes through that
way. ("ProtectedBasic")
On 1/10/2013 11:14 AM, reibenwein wrote:
>
> Hi!
>
>
> I copied com.novell.nam.authentication.PasswordClass to start with my
> test custom auth class. It includes a method getType() like this:
>
> /**
> * Get the authentication type this class implements
> *
> * @return returns the authentication type represented by this
> class
> */
> public String getType() {
> return AuthnConstants.PROTECTED_PASSWORD;
> }
>
>
> --> IDP loads my custom auth class, as long as a leave getType()
> returning AuthnConstants.PROTECTED_PASSWORD! But this is form base
> authentication. According to the API documentation (see page 17 in
> namc_enu.pfd within the sdk download), getType should
> returnAuthnConstants. PROTECTED_BASIC for secure Basic authentication
> (or AuthnConstants.BASIC for non SSL Basic auth). So i changed getType()
> like this:
>
>
> /**
> * Get the authentication type this class implements
> *
> * @return returns the authentication type represented by this class
> */
> public String getType() {
> return AuthnConstants.PROTECTED_BASIC;
> }
>
>
> --> and then IPD comes with the error "Failed to load authentication
> class due to unsupported type"...
>
>
> regards,
> Thomas
>
>

I bought an apple iPod 5th generation the other day and I cannot remember the unlock passcode. I have done the restore thing, but because I never set it up or synced it with iTunes, it does not recognize my device. It is disabled for one hour. Please help

I bought an apple iPod 5th generation the other day and I cannot remember the unlock passcode. I have done the restore thing, but because I never set it up or synced it with iTunes, it does not recognize my device. It is disabled for one hour. There's only a few things that could be my passcode, but because it disables for an hour, it is time consuming trying to figure it out. What do I do? I do not care about having to erase everything since it's new and there's nothing on it, but it was never synced with iTunes.

Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

I have updated my 4S i phone with ios 8.1.2, while activating i forgot my password, i am able to sign in my apple id in pc but not not able to sign in my i phone and message- your apple id has been disable for security reasons please help

I have updated my 4S i phone with ios 8.1.2, while activating my iphone, i forgot my password. I am able to sign in my apple id in pc (manage my account) but not not able to sign in my i phone and message- your apple id has been disable for security reasons please help.
my apple id is with extension @ gmail.com but for activation it is mentioned that it is linked with extension of @me.com

Hi ulhas1frombanihal,
Welcome to the Support Communities! Because your account has been disabled, you will need to contact Apple ID account security to straighten this out.
Contact Apple for help with Apple ID account security - Apple Support
http://support.apple.com/en-us/HT5699
I hope this information helps ....
- Judy

My itunes account was disabled for some reason. I changed password in iforgot and still didn't work. I could log in but not make purchases from the store so I set up a new login/account . Is there any way to move my music to the new account?

My itunes account was disabled for some reason. I changed password in iforgot and still didn't work. I could log in and see my music but not make purchases from the store or even redeem an itunes gift card so I set up a new login/account with another email account of mine. On the new account I can redeem my gift card and download items onto my ipad2. Is there any way to move my music to the new account?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

My ipod touch is disabled for 212,456,786 minutes! I have tried to restore and followd all instructions on the apple support site but this has not worked. Help!

My ipod touch has been disabled for 212,456,875 minutes! I have followed all instructions on the apple support site to restore it but this has not worked. Help!

Without know exactly what you did or what happened:
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

Ipod is disabled for 22,362,812 and will not restore cause it has a password how do i restore this device

ipod is disabled for 22,362,812 and will not let me restore it says there is a passwoed on this device and it needs to be removed. how do i get this device restored

Go into Recovery Mode per the instructions here.
Then, try the Restore. Everything except the password will be restored. Connect via cable to the computer that you use for sync. Be forewarned that it takes a long time. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Simply choose manual "Sync" from the bottom right of iTunes.

I DON'T WANT TO UPGRADE OR HAVE AN ADD ON EVER, DISABLING UPDATES DOES NOT WORK, HOW DO I KILL ALL MEASAGES FOR UP GRADES AND ADD ON'S FOR EVER, ONCE AND FOR ALL, COMPLETELY, THE END AND NEVER BE BOTHERED AGAIN EVER!

I DON'T WANT TO UPGRADE OR HAVE AN ADD ON EVER, DISABLING UPDATES DOES NOT WORK, HOW DO I KILL ALL MESSAGES FOR UP GRADES AND ADD ON'S FOR EVER, ONCE AND FOR ALL, COMPLETELY, THE END AND NEVER BE BOTHERED AGAIN EVER! ALSO IF I KILL MYSELF I WILL HOLD YOU PERSONALTY RESPONSIBLE.edit

There is a world of information in these forums if you use the search function near the top right of this page. Just type in NAS for example and you get many threads on the subject (marked with a green checkmark if it solved the question) another example would be Airport Exterme and sound system. Once you formulate your ideas better then specific questions can be addressed one at a time. You may find that a less expensive choice for a server might be a mac mini. Good luck with your project, ask more specific questions and update you systems profile.

Can we disable the 'Do not send a response' option for invitations?

Our organization recently migrated to Outlook \Exchange 2010 from Lotus Notes\Domino R7.0.4. Users are getting frustrated with the many limitations, or hopefully our lack of understanding, related to calendaring in Outlook.
Current Issue:
Employees can select "Do Not Send a Response" to meeting invitations, but still accept the invitations for their personal calendars. This can be very frustrating to the invitee, who is attempting to orchestrate complex meetings, since they do not
get updates for invitees who have accepted the meeting using this option.
It is plausible that all invitees could accept a meeting, but choose not to send a response. The originator of the meeting may than cancel the meeting, thinking, "what's the point, no one accepted it". The originator or an Admin staff should have
the ability to disable the "Do not Send a Response" option or at least have the option to require a response if desired.
Additionally, when invitees do send a response, it would be nice to have an option not to see response in the form of an email, but simply as an update to the Calendar 'Attendees' status, to avoid inbox clutter.
Lotus Notes had these functions at least 10 years ago, so I'm sure we are just overlooking a setting or configuration. Any guidance Microsoft support or readers can provide would be greatly appreciated.

Hi,
We can disable that option via GPO.
Please refer to Disable user interface items and shortcut keys in Office 2010:
http://technet.microsoft.com/en-us/library/cc179143(v=office.14).aspx
After adding the Office 2010 GPO templates to the domain, in Group Policy Management go to:
User Configuration / Polices / Administrative Templates / Microsoft Outlook 2010 / Disable Items in User Interface / Custom
Add the following Policy ID's: 19987, 19995 and 19991.
This will disable the three menu items "Do Not Send a Response" below the buttons Accept, Tentative and Decline. When the mouse pointer points to the disabled ("grayed out") menu item a message is shown telling the user that this menu is disabled by the
administrator.
If you are not used to the email response, simply create a rule to move all these responses to a single folder and clean them up periodically:
http://office.microsoft.com/en-in/outlook-help/manage-email-messages-by-using-rules-HA010355682.aspx
Regards.
Melon Chen
TechNet Community Support
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

My iPod touch is not responding and doesnt give any options says it's disabled for 22,134,252 minutes and not moving

my iPod touch is not responding and doesnt give any options says it's disabled for 22,134,252 minutes and not moving, any ideas?

iOS: Unable to update or restore

Stock posting for lot 010000000121 not supported

Hi Experts,
I am unable to reverse the UD and stock by using SAP NOTE 175842.
By using std program RQEVAC50 activated ZQM_RQEVAC50 and given the transaction code.
When I runn this T Code System is giving error massage "Stock posting for lot 010000000121 not supported"
Cross Checked all parameters find below
1) For movement type 322 and 349 assigned T Code QA11 and QA12
2) Posted stock available in same storage location
3) Lot 10 qty posted to unrested qty 10 and lot status is " UD ICCO SPCO STUP "
4) Material Not serial managed
Pls tell me the reason why it is not happening
Thanks
Shiva Patil
Edited by: SHIVA PATIL on Jan 15, 2010 4:10 PM

Resolved

Authentication denied: Boot identity not valid for Managed Server

Weblogic 8.1 SP4. Solaris 2.8.
Initially, I only had the admin server in my domain. My application was targetted to the admin. Eventually, I created a new managed server so that my application would be targetted here and my admin server would just be dedicated to its admin tasks. I tried starting my managed server for the first time using the standard startManagedWeblogic.sh -
I get this:
####<Aug 22, 2005 12:38:37 PM EDT> <Critical> <Security> <md3801> <winsManagedServer> <main> <<WLS Kernel>>
<> <BEA-090402> <Authentication denied: Boot identity not valid; The user name and/or password from the boot identity
file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was create
d. Please edit and update the boot identity file with the proper values of username and password. The first time the
updated boot identity file is used to start the server, these new values are encrypted.>
bash-2.03$
Starting the admin server is fine and it uses the same boot.properties file in my root directory (user weblogic). But when I start my managed server instance (which is in the same root directory), it complains about the boot.properties ! I assume it uses the same boot.properties file. Any insights ? Thanks.

Hi,
You should know the right username and password, so you have to edit boot.properties by hand.
Remove user and password entry and re-insert them.
Regards,
Antenore.
Antenore Gatta
Middleware Specialist
Hequa S.r.l
C.so Buenos Aires 77
20124 Milano
http://www.Hequa.it
Tel +39(0)267493078
Fax +39(0)267493079
Mobile +39 3481537897
______________________________________

My iPad is not being scanned by iTunes on my mac and my iPad has been disabled for a long time. What should i do?

My iPad is not being scanned by my iTunes software on my mac. My iPad has been disabled for a long time and i need to any how open it up. What should i do?

Hello, j2isgr8.
Thank you for visiting Apple Support Communities.
It sounds like your iPad is disabled and not recognized in iTunes. Here are the troubleshooting steps that I would recommend going through when experiencing this scenario.
Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled
http://support.apple.com/en-us/HT1212
Cheers,
Jason H.

Disable option contacts suggested contacts for adresses not in adresbook thru OCT/GPO

Is there a possibility to disable the option in Outlook 2010: automatically make outlook contacts for adressed which are not in outlook adresbook thru OCT or GPO?
We want to migrate Office 2003 to Office 2010. The configuration is made thry OCT so that it is fully automatically and configured for the end user. However i cannot find above setting to turn off.
This is importend because when this setting is enabled all contacts which are ever send an email comes in the Iphone.....
Is it possible to automatically disable this option thru OCT/GPO?
freddie

The registry key:
HKEY_CURRENT_USER\Software\Policies\Microsoft\Office\14.0\Outlook\Contact
DWORD: CreateContactsForOneOffs
Value: 0
is not excisting. When i choose in the registry the path without policys then the setting is there however when i change the setting to 1 and restart the client starrting outlook the setting: predefined contacts for adresses not in adresbook is not selected.
So if i change that regsitry setting nothing happens with the option in Outlook 2010, not after a restart of the system...
freddie

HT5624 my apple id account has been disabled for security reasons. I have re-set my password numerous times but the system still will NOT let me sign in. It continues to say your account has been disabled.

my apple id account has been disabled for security reasons. I have re-set my password numerous times but the system still will NOT let me sign in. It continues to say your account has been disabled.

CALL
1-800-MY-APPLE (1-800-692-7753) let them know and they will helo you enable the account. even if you change the password 50 times the account will stay disable till you call them
good luck

Authentication disable for Lotes Notes

Similar Messages

Maybe you are looking for