Authentication Error when I execute JOBS in OEM registered by OWB !!

Hi !
As I saw in the last question JOBS with
authentication error it's a commum problem ....
So follow I will detail what's happening with me:
I4m using the OWB and I did a map to extract data from two tables
on my source database and populate a destination dimension table, in my destination database.
I deploy this map, it4s sucesfull;
I run the map from OWB and it populates the destination dimension table perfectly;
I saved the TCL file and it4s OK;
I choose "Register in OEM" option and it register sucesfull;
but ... when I open the OEM and run the job from OEM, it fails !
It give this error:
VNI-2015 : Authentication error
Even when I try do it with "sysman" user
Could you help me ?
Thanks,
Renato

Hi,
Please check whether you have carried out these steps. Because I had the same problem and I resolved it.
1. I reckon you would have installed OWB and OEM.
2. In OEM if you are using the default SYSMAN user for running jobs, you should create the user SYSMAN in the OWB schema and assign the role SYSDBA, DBA AND OEM_MONITOR.
3. If you created a new user in OEM to run the jobs, you should create the user in OWB schema and assign the roles SYSDBA, DBA & OEM_MONITOR.
4. Then under your Windows NT/2000, create the OEM user and assign the user the rights "Logon as Batch Job to Run" previlege.
5. Configur OEM preferred credintials for NODE, DATABASE with proper values. The NODE user/password must be the one you have created under step 4.
6. Configur OWB with the OEM user. This can be done under Projects/Preferences, selecting OEM tab. The user/password must be thesame as under step 4.
If you do these things, not necessarily in the order mentioned, you should be able to run the jobs.
Best of luck.

Similar Messages

Error when scheduling backup job in OEM

We have Oracle 11.2 RAC on Redhat Linux. I was creating an customized backup job and get the errorsORA-01476: divisor is equal to zero
ORA-06512: at "SYSMAN.MGMT_JOB_ENGINE", line 7544
ORA-06512: at "SYSMAN.MGMT_JOB_ENGINE", line 7699
ORA-06512: at "SYSMAN.MGMT_JOB_ENGINE", line 8211
ORA-06512: at "SYSMAN.MGMT_JOB_ENGINE", line 8342
ORA-06512: at "SYSMAN.MGMT_JOB_ENGINE", line 8503
ORA-06512: at "SYSMAN.MGMT_JOB_ENGINE", line 8570
ORA-06512: at "SYSMAN.MGMT_JOBS", line 273
ORA-06512: at "SYSMAN.MGMT_JOBS", line 86
ORA-06512: at line 1 The backup command is created by OEM as backup incremental level 0 cumulative device type disk filesperset = 5 tag '%TAG' section size 500 M database;
backup device type disk filesperset = 500 tag '%TAG' section size 500 M archivelog all not backed up;
allocate channel for maintenance type disk;
delete noprompt obsolete device type disk;
release channel; Actually using other ommand also get the same error.
What is wrong? I scheduled backup job before on this server and it worked.

This may be due to that the schedule frequecy is not set. Make sure Frequency Type and Repeat Every boxes get filled properly.

Oracle warehouse builder error when I execute any mapping

oracle warehouse builder error when I execute any mapping:
I have installed OWB successfuly, It still no longer working correctly: it executed all the mappings, but it suddenly becomes incapable to execute any mappings in any project. It validates successfuly the mappings but in the execution it show the message :
" ora-06550 : ligne1 colonne19..."
please help me to correct this error.
thank you.

Make sure that there is no primary key or index on this table who exceed the limit.
For more information see
http://download-west.oracle.com/docs/cd/B10501_01/appdev.920/a96612/d_wm2.htm#105677

[Windows] file.url throw error when application executable in root directory

Here is the bugbase ticked: Bug#3940278 - [Windows] file.url throw error when application executable in root directory
If you launch AIR application packaged as bundle from root directory and try to get url property of any file you get IllegalOperationError.
No matter what file url property you try to get.
It's a big problem when you distribute your application on CD disks or flash drive.
I'd like to ask everyone affected by this issue to take a minute and vote for the following bug.
Thanks.

I checked all deployment descriptions and there are no references to t3://localhost:7001. Few months back, I had the complete clustering setup working on 2 machines and now when I deploy my application on same configuration, it fails with t3://localhost:7001 unreachable error. I created a new cluster configuration on one machine with 2 managed server and it deploys fine. Can not figure out what has changed ?

Error when i execute the webservice /SAPAPO/SDM_PARCRTRC

hi,
I am getting this error when i execute the webservice /SAPAPO/SDM_PARCRTRC for product availability. please tell me where am i going wrong ..... ? wat parameters are missing ? how to interpret this error?
An error has occurred. Maybe the request is not accepted by the server:
XML Serialization Error. Object content does not correspond to Schema restrictions of type [http://sap.com/xi/APO/Global][/wsdl:definitions/wsdl:types/xsd:schema[3]/xsd:complexType[3]/xsd:simpleContent/xsd:extension/xsd:attribute[1]/xsd:simpleType].
Quick response will be appreciated

hi,
due to the bad formatting of your posting it is hard to read. you might consider to use the code tag to enhance readability. moreover, 'executing a webservice' is a bit a vague description of what you do. are you consuming this service with any client program and this is throwing the exception or are you testing the webservice with any 3rd party tool and this is a server error returned to you?
anyway, I think you ttry to consume that service from within ABAP and the error message says a lot despite of its bad readability:
The client ist serializing a message (creating it from parameters) and is provided some argument for a parameter which doesn't conform to the WSDL. E.g. the WSDL declares some parameter to be an integer and between 0 and 100 and you try to supply it the value 234. THis would most probably result in your erromessage. or the WSDL says integer and you provided it a string (e.g. like 'foo' or '234').
anton

[svn] 1774: Bug: BLZ-176 - Not getting an authentication error when Producer tries to send a message over streaming channel with insufficient credentials .

Revision: 1774
Author: [email protected]
Date: 2008-05-16 13:29:10 -0700 (Fri, 16 May 2008)
Log Message:
Bug: BLZ-176 - Not getting an authentication error when Producer tries to send a message over streaming channel with insufficient credentials.
QA: Yes
Doc: No
Checkintests: Pass
Details: This was caused by the fact that streaming channels do not report connected until the initial ping completes and a URLStream is established with the server. Added some extra code in ChannelSet to make sure authentication errors are reported with correct faultCode even if the channel is not reporting connected.
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-176
Modified Paths:
flex/sdk/branches/3.0.1.x/frameworks/projects/rpc/src/mx/messaging/ChannelSet.as

Revision: 1774
Author: [email protected]
Date: 2008-05-16 13:29:10 -0700 (Fri, 16 May 2008)
Log Message:
Bug: BLZ-176 - Not getting an authentication error when Producer tries to send a message over streaming channel with insufficient credentials.
QA: Yes
Doc: No
Checkintests: Pass
Details: This was caused by the fact that streaming channels do not report connected until the initial ping completes and a URLStream is established with the server. Added some extra code in ChannelSet to make sure authentication errors are reported with correct faultCode even if the channel is not reporting connected.
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-176
Modified Paths:
flex/sdk/branches/3.0.1.x/frameworks/projects/rpc/src/mx/messaging/ChannelSet.as

Thiis error when I execute RSA3 on ECC. Any hints?

Hi Experts,
can you help me figure out how to fix this problem:
I am on an IDES system used by many for training. I am execute rsa3 and enter any of these datasources:
0fi_gl_4   or 2lis_11_vascl
and I get the following ABAP screen; any way to get the data extraction going?
Thiis error when I execute RSA3 on ECC. u2018----
screen -
(2) ABAP DEBUGGER CONTROLS SESSION 2(EXCLUSSIVE)
method IF_EX_RSU5_SAPI_BADI~DATA_TRANSFORM.
field-symbols: <wa_ZOXID30163> type ZOXID30163.
break-point.
case i_datasource.
    when 'ZMARA_DS'.
      loop at c_T_DATA assigning <wa_ZOXID30163>.
        <wa_ZOXID30163>-zztest = '123'.
      endloop.
endcase.
endmethod.
u2018----
Thanks

Hi,
Looking at the code it seems like there is no error but someone has put explicit Break point in the code, now you have two options,
1) Once you get the above screen just press F8 and let the extractor proceed. But everytime this will be manual process.
2) Remove the Break-point statement from the code.
As you said it is asking for Access Key, then get your developer key generated on service.sap.com or contact to your basis team.
Regards,
Durgesh.

Error When I Executed RFC "SLD_NUC"

Hi Experts,
Iam Getting the Error When I Executed the RFC " SLD_NUC" As Follows
<b>"program SLD_NUC not registered"</b>
Here I Entered Gateway Host As My Host Name And Gateway Service As sapgw00
Please Let me Know the Solution
Points will be given
Regards
Khanna

Hi Anji,
I saw the Gateway Host And Gateway Service in Transaction code "SMGW" By Going to Goto >>Parameters>>Display.
This Gateway Host And Gateway Service Information I Entered in "SLD_NUC" RFC in SM59.
But the Same Error is Coming
Please Let me Know
Regards
Khanna

Authentication error when I try to make encrypted disk image

I usually make an ecrypted disk image when I back up my financial files on my Powerbook g4 or flashdrive. Just recently I get a "cannot make" "files" - "authentication error". I've tried the single user mode and removed files as per the discussion boards to no avail. I've tried also to reset my password from the OSX disk. Any suggestions. Thanks

More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
What is your exact brand/model graphics adapter (ATI or nVidia or ???)
•What is your exact graphics adapter driver version?
•Have you gone to the vendor web site to check for a newer driver?
•For Windows, do NOT rely on Windows Update to have current driver information
•-you need to go direct to the vendor web site and check updates for yourself
•nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us
•ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool

Getting error when running process flows in oem

Hi all,
I'm trying to run a process flow in oem (using oem_exec_template.sql script), but it keeps failing with error "nms-1013: sqlplus does not exist". I tried running a map too and it failed with same message.
Any idea anyone?
Thanks!
Yanet

Hi,
Looks like you have an obvious code error, invalid cast operation in your code. Do you get this error when running in local emulator.
You can try the following article on how to debug published cloud service, assuming you have VS ultimate.
https://msdn.microsoft.com/en-us/library/azure/ff683671.aspx
Regards,
Nithin Rathnakar

ORA-27369 Error when running Scheduler jobs

We have an Oracle 11g Standard Edition (11.1.0.7) instance running on virtualized Oracle Enterprise Linux, hosted on VMWare. Every external job submitted via the Scheduler ends with the above error, although the jobs all run to completion - all steps are completed.
All of the external jobs are executed by a specific shell script that dynamically queries a table in the database with all the steps/programs that need to be executed. This varies from job to job. The script receives several parameters that are used to extract the task information.
If we run the same script from the OS, with the same parameters, the script runs to completion and no error is raised. We have tested this exhaustively and have never had the script raise any OS level errors.
Even a simple external script (e.g. a one-line shell script with something like "sleep 10") returns the same error code. The alert log always shows the same error text for every job:
ORA-12012: error on auto execute of job 73527
ORA-27369: job of type EXECUTABLE failed with exit code: No child processes
In our company we have at least 3 other similar 11g SE/Enterprise Linux/VMWare installations, and ours is the only one with this issue. I have had an open SR with Oracle support since January 2010 on this problem, but that has been an endless cycle of questons, replys, information requests, and requests for more info. No progress whatsoever. Since the jobs run to completion, it is not preventing us from workign with the scheduler, but the end users have become a little complacent with the "Error" status attached to their jobs so if one really fails, it may get missed.
The only difference we know of between our installation and the other similar installs is that we use Arcserve Agent for Linux to do (cold) backups to a remote Arcserve host. The other 3 sites use other backup software.
What we have observed is the following:
1. If we simply bounce the database, the problem persists.
2. If we shut down and restart the virtual server OS, the problem persists.
3. If we shut down the VMWare host server (and all the other VM's on that host!) and restart it, the problem persists.
4. If we shut down the virtual server OS and make a significant change to the server (e.g. add a new virtual disk) and restart it, the scheduler runs fine and no error is reported. But only until the next backup cycle. Then the problem returns and is persistent until the next time we make a similar significant change in the host virtual machine.
With no clear suggestions from Oracle Support, we are at our wit's end as to what we might be able to do to resolve this issue. There does appear to be a cause and effect link to Arcserve, but implementing a different backup solution is not an option at this time.
I wanted to post this issue in the hope that someone may have a tip or suggestion that could lead to a solution.....

I think it should be a better solution to create a package,
and put your own TYPES and procedure into it.
CREATE OR REPLACE PACKAGE PKG_XXX IS
TYPE TYP_TAB_CHAR IS TABLE OF .... ;
PROCEDURE P_XX ( Var1 IN VARCHAR2, var2 IN OUT TYP_TAB_CHAR );
END ;
Then in your Form :
Declare
var PKG_XXX.TYP_TAB_CHAR ;
Begin
PKG_XXX.P_XX( 'user_name', var ) ;
End ;

Getting error when we execute query in RSRT1

Hi Gurus,
I Loaded Transaction data in "0CCA_C11" cube and also loaded master data too.
but when i execute query in RSRT1 i am getting error message
1) Could not enter feature 0COSTCENTER__0PROFIT_CTR with SID 133 into table /BI0/SIOBJNM
2)System error in program CL_RSR and form GET_CHANMID-02- (see long text)
3)Error when generating dataProvider.
For 0COSTCENTER i loaded master data but for '0PROFIT_CTR' i am unable to load Hierarchy data because still the request is yellow even showing 58 from 58 records.
can any once can help me to soleve this issue.
Thanks in advance.
Raju.k
*points to be assigned.

Raju,
Try replicating your hierarchy DS and reload data.
hope it helps,
balaji

Sunstudio11, Internal Error when I execute a fortran program

Hello,
I installed sunstudio11 on a amd64 machine with ubuntu 6.06 LTS dapper drake.
I get an "Internal Error" message when I execute a fortran program (myprog < input.file).
Annotation: Exception occurred in Request Processor
java.lang.NullPointerException
at org.openide.execution.ProcessExecutor$PERunnable.run(ProcessExecutor.java:368)
[catch] at org.netbeans.core.execution.RunClassThread.run(RunClassThread.java:118)
The program is not running and it seems he is waiting on the input.file, although "< input.file" was set as an argument.
Thanks in advance for help,
Thomas

This is Sun Studio 11 right? Not a preview release of SS12?
So you must be using gfortran to build your program?
I assume the program runs from the command line okay.
If you're an IDE user, then I recommend that you check out the
new IDE in Sun Studio 12 Express 3 release. The new one is pre-release
and it has some rough edges, but it's the direction we're going
in the future, and we'd love to get feedback on it.
--chris

After download, midlet got "authentication error" when launched

with the new wireless toolkit, I picked demo projects, such as "Demos", or "CityGuide", to download into an Motorola i425 handset with Motorola's iDEN JAL. When I tried to launch the MIDlet(s), "Checking CityGuide" and then "Authentication error" were displayed. I had tried to sign the MIDlet. It still did not work.
Does anybody have any clue?
Thanks.

whatever, I've re-imaged it with i425.s19. everything works now.

E-Mail authentication error when sending emails. Droid X

Problem: On one email account I was unable to send e-mail messages.
Desciption: Get an authentication error after sending attempts
Cause: Unable to access the advanced setting menu for outgoing server
Reason: System software version 2.3.340.MB810 does not have the advanced menus.
Solution: Update Droid X software to version 4.5.596.en.us
Procedure:
1. Go to Settings icon
2. Select About Phone (last choice)
3. Select System Updates
4. Update the software - takes quite a while to download.
5. Install software when prompted.
6. Go to My Accounts
7. Select the problematic E-mail account
8. Go to Outgoing Sever
9. Go to advance settings (NEW)
10. Select the correct authentication settting per your ISP instructions for the outgoing server.
PROBLEM SOLVED!

good post

Authentication Error when I execute JOBS in OEM registered by OWB !!

Similar Messages

Maybe you are looking for