Error when i execute the webservice /SAPAPO/SDM_PARCRTRC

hi,
I am getting this error when i execute the webservice /SAPAPO/SDM_PARCRTRC for product availability. please tell me where am i going wrong ..... ? wat parameters are missing ? how to interpret this error?
An error has occurred. Maybe the request is not accepted by the server:
XML Serialization Error. Object content does not correspond to Schema restrictions of type [http://sap.com/xi/APO/Global][/wsdl:definitions/wsdl:types/xsd:schema[3]/xsd:complexType[3]/xsd:simpleContent/xsd:extension/xsd:attribute[1]/xsd:simpleType].
Quick response will be appreciated

hi,
due to the bad formatting of your posting it is hard to read. you might consider to use the code tag to enhance readability. moreover, 'executing a webservice' is a bit a vague description of what you do. are you consuming this service with any client program and this is throwing the exception or are you testing the webservice with any 3rd party tool and this is a server error returned to you?
anyway, I think you ttry to consume that service from within ABAP and the error message says a lot despite of its bad readability:
The client ist serializing a message (creating it from parameters) and is provided some argument for a parameter which doesn't conform to the WSDL. E.g. the WSDL declares some parameter to be an integer and between 0 and 100 and you try to supply it the value 234. THis would most probably result in your erromessage. or the WSDL says integer and you provided it a string (e.g. like 'foo' or '234').
anton

Similar Messages

Error When I Executed RFC "SLD_NUC"

Hi Experts,
Iam Getting the Error When I Executed the RFC " SLD_NUC" As Follows
<b>"program SLD_NUC not registered"</b>
Here I Entered Gateway Host As My Host Name And Gateway Service As sapgw00
Please Let me Know the Solution
Points will be given
Regards
Khanna

Hi Anji,
I saw the Gateway Host And Gateway Service in Transaction code "SMGW" By Going to Goto >>Parameters>>Display.
This Gateway Host And Gateway Service Information I Entered in "SLD_NUC" RFC in SM59.
But the Same Error is Coming
Please Let me Know
Regards
Khanna

When I execute the APD I am getting error?

When I execute the APD I am getting below error.
Pleasse help me to resovle this.
Duplicate records when writing data to DataStore object ZO08_ABC
Message no. RSAN_RT551
Diagnosis
During data processing, one of the analysis processes does not guarantee the uniqueness of data records in terms of the key fields they may have. One of the DataStore objects, however, has key fields. When data is written to DataStore object ZO08_ABC there must only be one data record in the key fields for each characteristic combination.
System Response
The analysis process is terminated because it is not possible to save all the data in DataStore object ZO08_ABC
Procedure
Check the definition of the analysis process and make any necessary changes. Redefine the analysis process in such a way so that the update does not produce duplicate data records. You could ensure against duplicate data records by proceeding as follows:
Check whether all key fields are filled correctly in the field assignments on the data flow arrow that enters the DataStore object.
Insert an aggregation node in front of the DataStore object and aggregate the data to match the key fields of the DataStoreobject. In the settings for the aggregation node, use the key fields of the DataStore object as grouping fields and all other fields as aggregation fields.
Points will be definitely assigned.
Thanks,
Vasu

Hi,
The values in query may have different combination of characteristics.. may only few of those are Key field to the ODS.
So Wen you display data , you can select the Key fields and sort.
And about aggregate...
Eg:
report values
X       y        z    K1
aaa bbb ccc    10
aaa bbb ddd     20
now ODS has X y as key field then load wil fail as u can see 2 records from report/query
So wen you put aggregate block on query ( and filter with z or not present in ODS) out put then
X            y          z (filtered)         k1
aaa      bbb        ccc                     30
if you need the Z value then i think you need to use transformation.

Help: An error when I initial the planning areas:internal error

Hi,
An error when I initial the planning areas, I create time series objects for planning area DP01, system show an error message to me as follow:
internal error [/SAPAPO/OM_TS_TGRID_CREATE]
Message no. /SAPAPO/TSM099
Thanks,
Thomson

Hi Thomson,
I think in planning area you did not only add the time series key figures
to the planning area but also defined key figure semantics for those
key figures. This must not be. To see those semantics you can check
the key figure details in transaction /SAPAPO/MSDP_ADMIN on the
key figure tab by selecting key figure details. For the time series
keyfigures, the semantics column is filled with values like 300, 301,
etc. If you wants to use time series key figures in addition
to the standard SNP-key figures, the semantics field has to be empty.
You can compare that with the settings in the other planning area where
everything is working fine.
If this is not the case then please refer the below note and execute the consistency reports as in note:
577038 Data inconsistencies in SNP
Regards,
Sunitha.

An unknown error occurred while executing the PowerShell script:

Hello all,
Not the most descriptive title, granted. I'm hoping this may prompt the next version toprovide additional valuable content.
Kindly requesting any help on this problem. I'm running VMM 2012 R2 version 3.2.7668
When I try to look at properties of an existing Private Cloud, I get this error, only if I "look" at certain attributes. If I stay away from the specific attributes, everything is hunky dory. For reasons unknown, after I get this error, I have
to exit and go back into VMM in order to get anything else to run.
The text in the error dialogue box is not entirely applicable because I was connected to the VMM server and will connect again, when I exit/relaunch.
An unknown error occurred while executing the PowerShell script:
The connection to the VMM management server scvmm2.mmmmmm.com was lost.
Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager service is started
on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
Try the operation again. If the issue persists, contact Microsoft Help and Support.
ID: 27235
This is what I get in Events
Warning 4/9/2015 3:27:04 PM PowerShell (Microsoft-Windows-PowerShell) 4100 Executing Pipeline
Log Name:      Microsoft-Windows-PowerShell/Operational
Source:        Microsoft-Windows-PowerShell
Date:          4/9/2015 3:27:04 PM
Event ID:      4100
Task Category: Executing Pipeline
Level:         Warning
Keywords:      None
User:          mmmmmm\paufra
Computer:      tools-francis.mmmmmm.com
Description:
Error Message = The connection to the VMM management server scvmm2.mmmmmm.com was lost. (Error ID: 1610)
Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager service is started
on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
Fully Qualified Error ID = 1610,Microsoft.SystemCenter.VirtualMachineManager.Cmdlets.GetSCReplicationGroupCmdlet
Recommended Action = Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager
service is started on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
Context:
        Severity = Warning
        Host Name = Default Host
        Host Version = 4.0
        Host ID = 94963cd4-5979-4786-9da2-c8814de8c7c3
        Host Application = C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VmmAdminUI.exe
        Engine Version = 4.0
        Runspace ID = 359d7a46-3752-4929-8c09-0de4152d10e4
        Pipeline ID = 16
        Command Name = Get-SCReplicationGroup
        Command Type = Cmdlet
        Script Name =
        Command Path =
        Sequence Number = 91
        User = mmmmmm\paufra
        Shell ID = Microsoft.PowerShell
User Data:
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-PowerShell" Guid="{A0C1853B-5C40-4B15-8766-3CF1C58F985A}" />
    <EventID>4100</EventID>
    <Version>1</Version>
    <Level>3</Level>
    <Task>106</Task>
    <Opcode>19</Opcode>
    <Keywords>0x0</Keywords>
    <TimeCreated SystemTime="2015-04-09T22:27:04.993655700Z" />
    <EventRecordID>285</EventRecordID>
    <Correlation ActivityID="{48059811-1A63-41E1-9057-7498D0E4FC20}" />
    <Execution ProcessID="2344" ThreadID="4076" />
    <Channel>Microsoft-Windows-PowerShell/Operational</Channel>
    <Computer>tools-francis.mmmmmm.com</Computer>
    <Security UserID="S-1-5-21-4008432563-1984933819-4238309236-2721" />
</System>
<EventData>
    <Data Name="ContextInfo">        Severity = Warning
        Host Name = Default Host
        Host Version = 4.0
        Host ID = 94963cd4-5979-4786-9da2-c8814de8c7c3
        Host Application = C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VmmAdminUI.exe
        Engine Version = 4.0
        Runspace ID = 359d7a46-3752-4929-8c09-0de4152d10e4
        Pipeline ID = 16
        Command Name = Get-SCReplicationGroup
        Command Type = Cmdlet
        Script Name =
        Command Path =
        Sequence Number = 91
        User = mmmmmm\paufra
        Shell ID = Microsoft.PowerShell
</Data>
    <Data Name="UserData">
    </Data>
    <Data Name="Payload">Error Message = The connection to the VMM management server scvmm2.mmmmmm.com was lost. (Error ID: 1610)
Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager service is started
on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
Fully Qualified Error ID = 1610,Microsoft.SystemCenter.VirtualMachineManager.Cmdlets.GetSCReplicationGroupCmdlet
Recommended Action = Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager
service is started on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
</Data>
</EventData>
</Event>

Hi Sir,
First , please try to run the VMM configuration analyzer on that computer :
http://www.microsoft.com/en-us/download/details.aspx?id=41555
In addition , please try to use "VMMTrace" mentioned in following article to collect trace log and find some useful information :
http://blogs.technet.com/b/jonjor/archive/2011/01/07/vmmtrace-simplified-scvmm-tracing.aspx
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

Receiving the error message while executing the Real Time DTP

Hi,
I am receiving the error message while executing the Real time DTP for Billing data.
Error Message - Record filtered in advance as error records with the same key exist RSM2 722
When I check the logs below is the message I am able to see. Can someone suggest as how to proceed further.
Diagnosis
The existing DTP requires a serialized update because fields are updated
non-commutatively during the processing run (for example, MOVE).
Therefore all new data records that have the same semantic key as
incorrect records that have not yet been corrected in earlier requests
or earlier data packages of the same request, are filtered out after the
extraction in a special step. In this way the system ensures that
incorrect data records are not repeated for your changes, which may not
contain errors themselves.
System Response
The data record is not updated but is written to an error stack.
Procedure
Procedure
Correct all incorrect data records and update them using an error DTP.
Procedure for System Administration
I checked the error stack and corrected the entries and let me know as how to proceed further. I am unable to execute the Error DTP as its not allowing me to edit and has only display options.
Regards,
Ram

Hi Arvindh,
Its write optimized DSO.. there is no option to generate SIDs.
Hi Kiran,
I checked the link u sent me. Here the main issue is..The function module is standard and its not allowing me to do enhancement point..
Any idea in using Badi's??
Thanks all...

Error coming while executing the query in analyzer

HI,
Any body help me in this matter.
when i execute the qurey in bex its showing error message coming with popup box.
Error is showing like this.
"no value found"
" Exception 1 when calling WB_HTML_HELP_URL_GEToccured"
but when i click on "OK" button its showing result.can any body tell me why its showing error message like this .
regards
mahesh

Hi ,
It happens because of the improper connectivity and configuration.In case of Web Reports so many pop ups will appear because of improper config..As long as you are getting the reports its ok,,,Should be taken care of Basis
Regards
Siva

[Windows] file.url throw error when application executable in root directory

Here is the bugbase ticked: Bug#3940278 - [Windows] file.url throw error when application executable in root directory
If you launch AIR application packaged as bundle from root directory and try to get url property of any file you get IllegalOperationError.
No matter what file url property you try to get.
It's a big problem when you distribute your application on CD disks or flash drive.
I'd like to ask everyone affected by this issue to take a minute and vote for the following bug.
Thanks.

I checked all deployment descriptions and there are no references to t3://localhost:7001. Few months back, I had the complete clustering setup working on 2 machines and now when I deploy my application on same configuration, it fails with t3://localhost:7001 unreachable error. I created a new cluster configuration on one machine with 2 managed server and it deploys fine. Can not figure out what has changed ?

I get a error when i open the criteria of a Alert subscription

Hi All,
I get this strange error when i open the criteria of a Alert subscription.
Below is the screen shot of the error and the contents of the alert.
Can any one help.
Note: The following information was gathered when the operation was attempted. The information may appear cryptic but provides context for the error. The application will continue to run.
Id='' -- Guid should contain 32 digits with 4 dashes (xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx).Id='' -- Guid should contain 32 digits with 4 dashes (xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx).
Microsoft.EnterpriseManagement.Common.DataAccessLayerException: Id='' -- Guid should contain 32 digits with 4 dashes (xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx).
at Microsoft.EnterpriseManagement.Mom.DataAccess.ParameterizedCriteriaBuilder.AddParameter(SqlCommand sqlCommand, String parameterName, ColumnDefinition columnDefinition, Object parameterValue, Boolean stronglyTypeParameter)
at Microsoft.EnterpriseManagement.Mom.DataAccess.ParameterizedCriteriaBuilder.ParsePredicateNextOperand(XmlReader criteriaReader, String parameterBaseName, SqlCommand sqlCommand, QueryDefinition queryDefinition, ColumnDefinition columnDefinition,
Boolean stronglyTypeParameter)
at Microsoft.EnterpriseManagement.Mom.DataAccess.ParameterizedCriteriaBuilder.NextPredicateWithPropertyOperatorAndOperand(StringBuilder criteriaStringBuilder, SqlCommand sqlCommand, QueryDefinition queryDefinition, ColumnDefinition columnDefinition,
String propertyName, XmlReader criteriaReader)
at Microsoft.EnterpriseManagement.Mom.DataAccess.ParameterizedCriteriaBuilder.ParsePredicateWithProperty(SqlCommand sqlCommand, QueryDefinition queryDefinition, Nullable`1 typeContextId, XmlReader criteriaReader)
at Microsoft.EnterpriseManagement.Mom.DataAccess.ParameterizedCriteriaBuilder.ParsePredicate(SqlCommand sqlCommand, QueryDefinition queryDefinition, Nullable`1 typeContextId, XmlReader criteriaReader)
at Microsoft.EnterpriseManagement.Mom.DataAccess.ParameterizedCriteriaBuilder.ParseCriteria(SqlCommand sqlCommand, QueryDefinition queryDefinition, Nullable`1 managedTypeIdContext, XmlReader criteriaReader)
at Microsoft.EnterpriseManagement.Mom.DataAccess.ParameterizedCriteriaBuilder.ParsePredicateGroup(SqlCommand sqlCommand, QueryDefinition queryDefinition, Nullable`1 managedTypeIdContext, XmlReader criteriaReader)
at Microsoft.EnterpriseManagement.Mom.DataAccess.ParameterizedCriteriaBuilder.ParseCriteria(SqlCommand sqlCommand, QueryDefinition queryDefinition, Nullable`1 managedTypeIdContext, XmlReader criteriaReader)
at Microsoft.EnterpriseManagement.Mom.DataAccess.ParameterizedCriteriaBuilder.CreateCriteriaTextAndParameters(SqlCommand sqlCommand, QueryDefinition queryDefinition, XmlReader criteriaReader, XmlNamespaceManager xmlNamespaceManager)
at Microsoft.EnterpriseManagement.Mom.DataAccess.SqlCommandBuilder.CreateCriteria(SqlCommand sqlCommand, QueryDefinition queryDefinition, String criteriaXml, Dictionary`2 parameterValues)
at Microsoft.EnterpriseManagement.Mom.DataAccess.QueryRequest.CreateSqlCommandForSelectType()
at Microsoft.EnterpriseManagement.Mom.DataAccess.QueryRequest.Execute(SqlNotificationRequest sqlNotificationRequest)
at Microsoft.EnterpriseManagement.Mom.ServiceDataLayer.DataAccess.ExecuteQuery(String queryDefinitionName, String criteriaXml, Pair`2[] parametersAndValues, String inClauseColumnName, ICollection`1 inClauseElements)
Gautam.75801

Was any changes made to the Notifications Internal Library MP?
Do you have a recent/latest backup copy for the MP? if yes, you may want to reimport it.
Blog: http://theinfraguys.com
Follow me at Facebook
The Infra Guys Facebook Page
Please remember to click Mark as Answer on the answer if it helps you in anyway

Thiis error when I execute RSA3 on ECC. Any hints?

Hi Experts,
can you help me figure out how to fix this problem:
I am on an IDES system used by many for training. I am execute rsa3 and enter any of these datasources:
0fi_gl_4   or 2lis_11_vascl
and I get the following ABAP screen; any way to get the data extraction going?
Thiis error when I execute RSA3 on ECC. u2018----
screen -
(2) ABAP DEBUGGER CONTROLS SESSION 2(EXCLUSSIVE)
method IF_EX_RSU5_SAPI_BADI~DATA_TRANSFORM.
field-symbols: <wa_ZOXID30163> type ZOXID30163.
break-point.
case i_datasource.
    when 'ZMARA_DS'.
      loop at c_T_DATA assigning <wa_ZOXID30163>.
        <wa_ZOXID30163>-zztest = '123'.
      endloop.
endcase.
endmethod.
u2018----
Thanks

Hi,
Looking at the code it seems like there is no error but someone has put explicit Break point in the code, now you have two options,
1) Once you get the above screen just press F8 and let the extractor proceed. But everytime this will be manual process.
2) Remove the Break-point statement from the code.
As you said it is asking for Access Key, then get your developer key generated on service.sap.com or contact to your basis team.
Regards,
Durgesh.

Oracle warehouse builder error when I execute any mapping

oracle warehouse builder error when I execute any mapping:
I have installed OWB successfuly, It still no longer working correctly: it executed all the mappings, but it suddenly becomes incapable to execute any mappings in any project. It validates successfuly the mappings but in the execution it show the message :
" ora-06550 : ligne1 colonne19..."
please help me to correct this error.
thank you.

Make sure that there is no primary key or index on this table who exceed the limit.
For more information see
http://download-west.oracle.com/docs/cd/B10501_01/appdev.920/a96612/d_wm2.htm#105677

Error when I deployed the java EAR application in NWDS 7.1

HI All,
I got the error when I deployed the java EAR application in NWDS 7.1 version..help me out...........................................
com.sap.ide.eclipse.deployer.api.APIException: DeployException,cause=[ERROR CODE DPL.DCAPI.1023] AuthorizationException.
Reason: , An error occurred during the deployer retrieval. Cause =[ERROR CODE DPL.DC.3151] The user LJ4PJW could not be authorized, because doesn't own the (com.sap.engine.interfaces.security.ServiceAccessPermission dc) permission for deploy controller. at com.sap.ide.eclipse.deployer.dc.ComponentManagerImpl.getDeployProcessor(ComponentManagerImpl.java:62)
Thanks
Costa

The user LJ4PJW could not be authorized, *because doesn't own the* (com.sap.engine.interfaces.security.ServiceAccessPermission dc) *permission for deploy controller. a*t com.sap.ide.eclipse.deployer.dc.ComponentManagerImpl.getDeployProcessor(ComponentManagerImpl.java:62)
The user is not have proper authorizations. Use some other administrators user id which has all admin roles and authorizations assigned and try to deploy.
Regards,
Ravi

No records were selected message when I execute the KE30

Dear All,
I have created a CO-PA Profitability Report by Report Painter and when I execute the KE30 ,system is giving a message as "No records were selected ".
I have checked the actual line item report (KE24),all the values are flowing and showing under value fields tab.Even in KE30 ,I could see the report layout ,but values are not appearing.
Please help me to find where it went wrong.
Regards
Subbu

Hi Subbu
1. Check your record type..Billing data has record type as F... see your form in KE35 and check it
2. Execute your report with selection parameters like Comp Code and the Period... Once the data is displayed, you can further refine the selection criteria
3. Also check in KE35 -
a. The Plan/Actual indicator.. You should select "Actual values" in it
b. the currency type - Select as applicable to you
Regards
Ajay M

Error encountered while executing the transform project name.map name. Error:Unable to create the transform. Microsoft.XLANGs.Engine

Hi All,
I developed a Biztalk Application aims to upload a flat file data to our system MS SQL Server database. It works fine until one day, an exception is generated as below.
"Error encountered while executing the transform project name.map name. Error:Unable to create the transform. Microsoft.XLANGs.Engine"
It continues to generate an exception until I restart the Biztalk instance. And it happens occasionally, no pattern, cannot be traced and debugged.
Anybody has an idea about this error? Please help, thank you very much.
The Biztalk Server is running on Hyper-V Virtual machine, Biztalk Server 2009 on Windows Server 2008.
The Biztalk Application consists of Mapping Functoid, Orchestration, Flatfile Schema, Flatfile Disassembler Pipeline, SQL Send Port, File Receive Port and Send Port
Eric

HI Eric,
I think it might happen because of large message (Out of Memory exception). As you said you have flat file as inbound, you are doing mapping and then sending it to MSSQL
SO you can check below mentioned things
1) Any custom pipeline component is used in receive pipeline. (if so optimize the code)
2) This issue haapen only with large message (BizTalk convert flat file to XMl to if you have 1MB file corresponding XML will be of higher size)
again all thing mentioned above is assumption.
YOu can use debugdiag tool to see if memory leak is happening
http://www.microsoft.com/en-in/download/details.aspx?id=26798

Error when I open the new help in FCP7

I get a error when I open the new help in FCP7:
The Help Library requires JavaScript.
If JavaScript is not enabled, you will not
be able to view all the content.

I have checked that Javascript was enabled in Safari (and it is).
I can read the documentation in Safari online using this link: http://documentation.apple.com/en/finalcutpro/usermanual/
I have now tried all the new/updated programs in the FCS3 suite they all have the same problem:
The Help Library requires JavaScript.
If JavaScript is not enabled, you will not
be able to view all the content.
Mikael

Error when i execute the webservice /SAPAPO/SDM_PARCRTRC

Similar Messages

Maybe you are looking for