Thiis error when I execute RSA3 on ECC. Any hints?
Hi Experts,
can you help me figure out how to fix this problem:
I am on an IDES system used by many for training. I am execute rsa3 and enter any of these datasources:
0fi_gl_4 or 2lis_11_vascl
and I get the following ABAP screen; any way to get the data extraction going?
Thiis error when I execute RSA3 on ECC. u2018----
screen -
(2) ABAP DEBUGGER CONTROLS SESSION 2(EXCLUSSIVE)
method IF_EX_RSU5_SAPI_BADI~DATA_TRANSFORM.
field-symbols: <wa_ZOXID30163> type ZOXID30163.
break-point.
case i_datasource.
when 'ZMARA_DS'.
loop at c_T_DATA assigning <wa_ZOXID30163>.
<wa_ZOXID30163>-zztest = '123'.
endloop.
endcase.
endmethod.
u2018----
Thanks
Hi,
Looking at the code it seems like there is no error but someone has put explicit Break point in the code, now you have two options,
1) Once you get the above screen just press F8 and let the extractor proceed. But everytime this will be manual process.
2) Remove the Break-point statement from the code.
As you said it is asking for Access Key, then get your developer key generated on service.sap.com or contact to your basis team.
Regards,
Durgesh.
Similar Messages
-
[Windows] file.url throw error when application executable in root directory
Here is the bugbase ticked: Bug#3940278 - [Windows] file.url throw error when application executable in root directory
If you launch AIR application packaged as bundle from root directory and try to get url property of any file you get IllegalOperationError.
No matter what file url property you try to get.
It's a big problem when you distribute your application on CD disks or flash drive.
I'd like to ask everyone affected by this issue to take a minute and vote for the following bug.
Thanks.I checked all deployment descriptions and there are no references to t3://localhost:7001. Few months back, I had the complete clustering setup working on 2 machines and now when I deploy my application on same configuration, it fails with t3://localhost:7001 unreachable error. I created a new cluster configuration on one machine with 2 managed server and it deploys fine. Can not figure out what has changed ?
-
Error when i execute the webservice /SAPAPO/SDM_PARCRTRC
hi,
I am getting this error when i execute the webservice /SAPAPO/SDM_PARCRTRC for product availability. please tell me where am i going wrong ..... ? wat parameters are missing ? how to interpret this error?
An error has occurred. Maybe the request is not accepted by the server:
XML Serialization Error. Object content does not correspond to Schema restrictions of type [http://sap.com/xi/APO/Global][/wsdl:definitions/wsdl:types/xsd:schema[3]/xsd:complexType[3]/xsd:simpleContent/xsd:extension/xsd:attribute[1]/xsd:simpleType].
Quick response will be appreciatedhi,
due to the bad formatting of your posting it is hard to read. you might consider to use the code tag to enhance readability. moreover, 'executing a webservice' is a bit a vague description of what you do. are you consuming this service with any client program and this is throwing the exception or are you testing the webservice with any 3rd party tool and this is a server error returned to you?
anyway, I think you ttry to consume that service from within ABAP and the error message says a lot despite of its bad readability:
The client ist serializing a message (creating it from parameters) and is provided some argument for a parameter which doesn't conform to the WSDL. E.g. the WSDL declares some parameter to be an integer and between 0 and 100 and you try to supply it the value 234. THis would most probably result in your erromessage. or the WSDL says integer and you provided it a string (e.g. like 'foo' or '234').
anton -
Oracle warehouse builder error when I execute any mapping
oracle warehouse builder error when I execute any mapping:
I have installed OWB successfuly, It still no longer working correctly: it executed all the mappings, but it suddenly becomes incapable to execute any mappings in any project. It validates successfuly the mappings but in the execution it show the message :
" ora-06550 : ligne1 colonne19..."
please help me to correct this error.
thank you.Make sure that there is no primary key or index on this table who exceed the limit.
For more information see
http://download-west.oracle.com/docs/cd/B10501_01/appdev.920/a96612/d_wm2.htm#105677 -
Error When I Executed RFC "SLD_NUC"
Hi Experts,
Iam Getting the Error When I Executed the RFC " SLD_NUC" As Follows
<b>"program SLD_NUC not registered"</b>
Here I Entered Gateway Host As My Host Name And Gateway Service As sapgw00
Please Let me Know the Solution
Points will be given
Regards
KhannaHi Anji,
I saw the Gateway Host And Gateway Service in Transaction code "SMGW" By Going to Goto >>Parameters>>Display.
This Gateway Host And Gateway Service Information I Entered in "SLD_NUC" RFC in SM59.
But the Same Error is Coming
Please Let me Know
Regards
Khanna -
Error when trying to update or download any app
I'm getting an Error when trying to update or download any app from Mac App Store
Every time I try to update xCode to version 6.2 but I get this error :
The server gave an error during download: 503 Service Unavailable.
So I tried to download a random app from the App Store but I got the same error message.
So any advices ?Hello HusseinAlBehary,
Sorry to hear your troubles updating and downloading apps from the Mac App Store. Based on when you were doing that, it looks like the Mac App Store was experiencing difficulties. It is not currently so you should be able to upgrade with out issues now. If you experience this in the future, look at the page below to start you on figuring out if it is something on your end or Apple’s end.
Apple Services, Stores, and iCloud
https://www.apple.com/support/systemstatus/
Regards,
-Norm G. -
I get a runtime error when I try to open itunes, any help?
I get a runtime error when I try to open itunes, any help?
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
Hello! Tried unsuccessfully to restore my MBP, running the Mac OSX Lion, to factory settings. I keep getting the "can't download additional components for the Mac OSX Lion" error when reinstalling the OSX Lion. Any tips on how to resolve this problem?
Hi
Given that your answer to 1. is 'pre-installed' and 3. is 'No', I think the only thing to do is to take it to an Apple store (ideally the one you bought it from) and have them reinstall it for you.
The intended solution in cases like yours is that you should be able to reboot and install even a wiped disk by using Apple's servers over the internet (you do this by restarting with 'command-r' and choosing 'reinstall Lion'). However if this isn't working for you then you need to get the store to do it. Don't let them fob you off with 'go home and try again'. Have them do it in the shop (you're still covered by Applecare warranty so it should cost you nothing save the inconvenience of the trip and possibly leaving the machine there while they fix it).
A reinstall should leave all your own personal data and programs in place.
Note for future: when you get it fixed, first thing to do is buy a cheap external drive and start keeping a backup (either Time Machine or clone with Carbon Copy Cloner).
Message was edited by: softwater -
Getting error when we execute query in RSRT1
Hi Gurus,
I Loaded Transaction data in "0CCA_C11" cube and also loaded master data too.
but when i execute query in RSRT1 i am getting error message
1) Could not enter feature 0COSTCENTER__0PROFIT_CTR with SID 133 into table /BI0/SIOBJNM
2)System error in program CL_RSR and form GET_CHANMID-02- (see long text)
3)Error when generating dataProvider.
For 0COSTCENTER i loaded master data but for '0PROFIT_CTR' i am unable to load Hierarchy data because still the request is yellow even showing 58 from 58 records.
can any once can help me to soleve this issue.
Thanks in advance.
Raju.k
*points to be assigned.Raju,
Try replicating your hierarchy DS and reload data.
hope it helps,
balaji -
Sunstudio11, Internal Error when I execute a fortran program
Hello,
I installed sunstudio11 on a amd64 machine with ubuntu 6.06 LTS dapper drake.
I get an "Internal Error" message when I execute a fortran program (myprog < input.file).
Annotation: Exception occurred in Request Processor
java.lang.NullPointerException
at org.openide.execution.ProcessExecutor$PERunnable.run(ProcessExecutor.java:368)
[catch] at org.netbeans.core.execution.RunClassThread.run(RunClassThread.java:118)
The program is not running and it seems he is waiting on the input.file, although "< input.file" was set as an argument.
Thanks in advance for help,
ThomasThis is Sun Studio 11 right? Not a preview release of SS12?
So you must be using gfortran to build your program?
I assume the program runs from the command line okay.
If you're an IDE user, then I recommend that you check out the
new IDE in Sun Studio 12 Express 3 release. The new one is pre-release
and it has some rough edges, but it's the direction we're going
in the future, and we'd love to get feedback on it.
--chris -
On ECC, got these ERROR messages ACTIVATING a created View. Any hints?
Hi,
In creating a view on ECC, I got these messages while activating the View:
VIEW ZVIEWXXX was not activated
Check view ZVIEWXXX (MARK001/09.01.10/19:18)
View allows read-only access only. Maintenance not possible.
'Display using Data Browser only' was set automatically
The view ignores client-dependency of the base tables
Key field MBEWH-BWKEY missing
Key field MBEWH-BWTAR missing
Key field MBEWH-LFGJA missing
Key field MBEWH-LFMON missing
All fields are evaluated as key field
Field name MATNR not unique
Field MARA-LAEDA (Type conflict in selection condition)
Operator is not allowed in a selection condition.
Field MARA-AENAM (Type conflict in selection condition)
Link the selection conditions with AND or OR
Operator is not allowed in a selection condition.
1. Any hints to help fix these problems?
Ok, I went ahead and added the following fields in the error message :
MBEWH-BWKEY
MBEWH-BWTAR
MBEWH-LFGJA
MBEWH-LFMON
2. Now, after this, the error reduced to the following below. But why am I being forced to add fields that I do not need?
(I also removed the condition)
VIEW ZVIEWXXX was not activated
Check view ZVIEWXXX (MARK001/09.01.10/19:18)
View allows read-only access only. Maintenance not possible.
'Display using Data Browser only' was set automatically
Field name MANDT not unique
View ZVIEWXXX is not consistent
============================================================
End of activation of worklist
============================================================
3. Ok, So, why do I still have the above errors, the view is still not activating.
Thanks
Edited by: AmandaBaah on May 10, 2010 1:43 AM
Edited by: AmandaBaah on May 10, 2010 2:05 AMHi Lynn,
Found your problem.
View Field Table Field Data Element
MANDT MARA MANDT MANDT
MATNR MARA MATNR MATNR
ERSDA MARA ERSDA ERSDA
ERNAM MARA ERNAM ERNAM
LAEDA MARA LAEDA LAEDA
AENAM MARA AENAM AENAM
MANDT MBEWH MANDT MANDT
MATNR MBEWH MATNR MATNR
STPRS MBEWH STPRS STPRS
PEINH MBEWH PEINH PEINH
VKSAL MBEWH VKSAL VKSAL
BWKEY MBEWH BWKEY BWKEY
BWTAR MBEWH BWTAR BWTAR_D
LFGJA MBEWH LFGJA LFGJA
LFMON MBEWH LFMON LFMON
The basic function of a view is to join two or more tables. So when you join tables, the common data based on your join condition is fetched. Therefore if you have mapped mandt from mara to mandt to mbewh, then data will be fetched from both tables on the same condition. Therefore in your final result, you will have only 1 mandt field.
In your view, there are several problems. You only need to have 1 MANDT and 1 MATNR.
What the view will do is that it will fetch all records from MARA and then fetch all records from MBWEH where MANDT and MATNR match.
So the revised view should be
MANDT MARA MANDT MANDT
MATNR MARA MATNR MATNR
ERSDA MARA ERSDA ERSDA
ERNAM MARA ERNAM ERNAM
LAEDA MARA LAEDA LAEDA
AENAM MARA AENAM AENAM
MANDT MBEWH MANDT MANDT delete
MATNR MBEWH MATNR MATNR delete
STPRS MBEWH STPRS STPRS
PEINH MBEWH PEINH PEINH
VKSAL MBEWH VKSAL VKSAL
BWKEY MBEWH BWKEY BWKEY
BWTAR MBEWH BWTAR BWTAR_D
LFGJA MBEWH LFGJA LFGJA
LFMON MBEWH LFMON LFMON
This should solve your problems.
Regards. -
Error when installing database instance IDES ECC 5.0 SR1
Hi,
I got an error like this when installing the database instance (non unicode abap system) for IDES ECC 5.0 SR1.
(I use ms sql server 2000 and windows 2003 server)
TRACE
trying to insert package SAPVIEW.STR
TRACE
checking directory IDES/Disc
ERROR 2008-07-13 14:57:41
MSC-01003 ESyException: ESAPinstException: error text undefined
o
+
*o Transaction end ************************************************************
ERROR 2008-07-13 14:57:41
FSL-02015 Node D:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB\IDES\Disc\DATA does not exist.
WARNING 2008-07-13 14:57:41
The step fillR3loadPackageTable with step key SAPSYSTEM_DB|ind|ind|ind|ind|ind|0|SAPSYSTEM|ind|ind|ind|ind|ind|0|SAPComponent|ind|ind|ind|ind|ind|0|DatabaseLoad|ind|ind|ind|ind|ind|0|fillR3loadPackageTable was executed with status ERROR.
I have already create this folder :
D:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB\IDES\Disc\DATA does not exist.*
Can anyone help what is the error and how to solve it?
ThanksHi,
1. Check the CDs first.
2. D:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB\IDES\Disc\DATA--> this will automatically created by sapinst command.
Regards,
Srini Nookala -
Error when I execute an application with the java command in a DOS prompt
Hi:
I have a trouble. I edit the most simple program in Java: hello.java
In DOS prompt, I compile the program. The result is the file hello.class
c:\> javac hello.java
However, I try to execute this program with the command java
c:\> java hello
and the DOS prompt send me an error like this: Java.exe has a problem and must be closed.
I press the option "Don't send". After this, the DOS prompt returns empty and it doesnt execute the application:
c:\>
By the way, in an IDE editor like Gel, the file hello.java is compiled and executed correctly without problems.
I edited other simple Java files, I compiled them succesfully and I can't run them in a DOS pormpt. The result is the same dialog box: "Java.exe has a problem and must be closed".
The question is: Why don't these programs run in a DOS prompt?
My Operating System is Microsoft Windows XP and the Java compiler version is: 1.6.0_13
Thanks in advanced.Hi again:
What happens when you type "java -version"?
Answer:
java version "1.2"
Classic VM (build JDK-1.2-V, native threads)
What is the value of your %PATH%?
Answer:
Path=E:\oracle\product\10.2.0\db_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Archivos de programa\Archivos comunes\Adaptec Shared\System;C:\Archivos de programa\Executive Software\DiskeeperLite\;C:\Archivos de programa\QuickTime\QTSystem\;C:\Archivos de programa\Java\jdk1.6.0_13\bin;C:\Archivos de programa\Microsoft SQL Server\80\Tools\Binn\;e:\Microsoft SQL Server\90\Tools\binn\;C:\BITWARE\;C:\Archivos de programa\Archivos comunes\Ahead\Lib\
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
Have you considered running Linux?
Answer: No, because Linux is more complex.
Additional information:
My Operating System is: Microsoft Windows XP Profesional Version 2002, Service Pack 3, running on an Intel Pentium 4, CPU 2.4 Ghz, RAM: 2.23 Gb -
Get an error when grant execute on dbms_lock to user?
Hi all,
i have to grant several privileges/roles to user X, it works fine if only one privilege/role is granted one time, but an error raised when i put them together in one grant command, does anyone have any ideas regarding this? thanks in advance.
sqlplus sys/*****@*** as sysdba
SQL> grant execute on dbms_lock to X;
Grant succeeded.
SQL> grant resource to X;
Grant succeeded.
SQL> grant execute on dbms_lock,resource to X;
grant execute on dbms_lock,resource to X
ERROR at line 1:
ORA-00905: missing keyword
SQL> grant resource,execute on dbms_lock to X;
grant resource,execute on dbms_lock to X
ERROR at line 1:
ORA-01953: command no longer valid, see ALTER USER>
SQL> grant execute on dbms_lock,resource to X;
grant execute on dbms_lock,resource to X
ERROR at line 1:
ORA-00905: missing keyword
SQL> grant resource,execute on dbms_lock to X;
grant resource,execute on dbms_lock to X
ERROR at line 1:
ORA-01953: command no longer valid, see ALTER USER
>
It will help to read the documentation on grant statement.
You can't grant privileges on two different objects or roles in one statement. However you can grant two or more privileges on same object in one statement.
SQL> grant select,update on emp to X; -
A fatal error when I execute two application
Hi! I have a maven java application, which count mouse clicks and key presses with jnativehook. when I launch application (jar file) and it starts counting events, I launch second application in IDE, and when it starts counting events, my first app is crash exit, with error message:
# A fatal error has been detected by the Java Runtime Environment:
# SIGSEGV (0xb) at pc=0x0000000000002196, pid=6756, tid=140255629047552
# JRE version: Java(TM) SE Runtime Environment (7.0_45-b18) (build 1.7.0_45-b18)
# Java VM: Java HotSpot(TM) 64-Bit Server VM (24.45-b08 mixed mode linux-amd64 compressed oops)
# Problematic frame:
# C 0x0000000000002196
# Failed to write core dump. Core dumps have been disabled. To enable core dumping, try "ulimit -c unlimited" before starting Java again
# An error report file with more information is saved as:
# /home/beknazar/Documents/newjar/tracker-1.0-SNAPSHOT/hs_err_pid6756.log
# If you would like to submit a bug report, please visit:
# http://bugreport.sun.com/bugreport/crash.jsp
Aborted (core dumped)
please, help meHi again:
What happens when you type "java -version"?
Answer:
java version "1.2"
Classic VM (build JDK-1.2-V, native threads)
What is the value of your %PATH%?
Answer:
Path=E:\oracle\product\10.2.0\db_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Archivos de programa\Archivos comunes\Adaptec Shared\System;C:\Archivos de programa\Executive Software\DiskeeperLite\;C:\Archivos de programa\QuickTime\QTSystem\;C:\Archivos de programa\Java\jdk1.6.0_13\bin;C:\Archivos de programa\Microsoft SQL Server\80\Tools\Binn\;e:\Microsoft SQL Server\90\Tools\binn\;C:\BITWARE\;C:\Archivos de programa\Archivos comunes\Ahead\Lib\
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
Have you considered running Linux?
Answer: No, because Linux is more complex.
Additional information:
My Operating System is: Microsoft Windows XP Profesional Version 2002, Service Pack 3, running on an Intel Pentium 4, CPU 2.4 Ghz, RAM: 2.23 Gb
Maybe you are looking for
-
Shrink to fit page doesn't work
Hi. I have a complex program which is doing the following. Java program calling c++ executable by using "Process" object which is using Win API interface to start new process eg: "c:\PathTo Adobe executable /p /h c:\myPdf.pdf". The document's margins
-
F110 Payment Run Clarification
Dear All Experts, In F110 transaction, due payment calculation is calculated on FI document posting date. I want to change this configuration. I want to calculate due payment on the basis of invoice date not on payment due date. is it possible?
-
Hi All, I have an Outlook COM addin written in C#. It is working without any issues on most client machines, but since of late it has started giving the above Exception for some clients running Outlook 2010. I understand that the issue is that the pa
-
Is there any way that I could get pages on to my iPhone without buying it again, through the app store? I already bought the computer software.
-
Business Component Browser dies when using bind parameter
Hi, I'm using JDeveloper 11.1.1.0.2 on Windows XP When I start the Business Component Browser and open a ViewObject using a bind parameter, causing to query more than one row, CPU goes to 100% Half the time I get an java.lang.OutOfMemoryError: Java h