Authoring for PC environment
Hey all,
Any tips for authoring for a bunch of PC users ?
They say it plays jerkily.
They have DVD players except they've lost all the remotes for them so the players are useless (I LOVE THIS BUSINESSSSS!)
I am using FCE and I also have Roxio 10 with an external burner and need to burn without chapters and auto play for these people.
thanks,
Al
Hello Al,
+Any tips for authoring for a bunch of PC users ?+
Create a disk image, burn at slow speed using high quality -R media ... and tell them not to use Media Player.
mish
Similar Messages
-
AnyConnect error " User not authorized for AnyConnect Client access, contact your administrator"
Hi everyone,
it's probably just me but I have tried real hard to get a simple AnyConnect setup working in a lab environment on my ASA 5505 at home, without luck. When I connect with the AnyConnect client I get the error message "User not authorized for AnyConnect Client access, contact your administrator". I have searched for this error and tried some of the few solutions out there, but to no avail. I also updated the ASA from 8.4.4(1) to 9.1(1) and ASDM from 6.4(9) to 7.1(1) but still the same problem. The setup of the ASA is straight forward, directly connected to the Internet with a 10.0.1.0 / 24 subnet on the inside and an address pool of 10.0.2.0 / 24 to assign to the VPN clients. Please note that due to ISP restrictions, I'm using port 44455 instead of 443. I had AnyConnect working with the SSL portal, but IKEv2 IPsec is giving me a headache. I have stripped down certificate authentication which I had running before just to eliminate this as a potential cause of the issue. When running debugging, I do not get any error messages - the handshake completes successfully and the local authentication works fine as well.
Please find the current config and debugging output below. I appreciate any pointers as to what might be wrong here.
: Saved
ASA Version 9.1(1)
hostname ASA
domain-name ingo.local
enable password ... encrypted
xlate per-session deny tcp any4 any4
xlate per-session deny tcp any4 any6
xlate per-session deny tcp any6 any4
xlate per-session deny tcp any6 any6
xlate per-session deny udp any4 any4 eq domain
xlate per-session deny udp any4 any6 eq domain
xlate per-session deny udp any6 any4 eq domain
xlate per-session deny udp any6 any6 eq domain
passwd ... encrypted
names
name 10.0.1.0 LAN-10-0-1-x
dns-guard
ip local pool VPNPool 10.0.2.1-10.0.2.10 mask 255.255.255.0
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif Internal
security-level 100
ip address 10.0.1.254 255.255.255.0
interface Vlan2
nameif External
security-level 0
ip address dhcp setroute
regex BlockFacebook "facebook.com"
banner login This is a monitored system. Unauthorized access is prohibited.
boot system disk0:/asa911-k8.bin
ftp mode passive
clock timezone PST -8
clock summer-time PDT recurring
dns domain-lookup Internal
dns domain-lookup External
dns server-group DefaultDNS
name-server 10.0.1.11
name-server 75.153.176.1
name-server 75.153.176.9
domain-name ingo.local
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network LAN-10-0-1-x
subnet 10.0.1.0 255.255.255.0
object network Company-IP1
host xxx.xxx.xxx.xxx
object network Company-IP2
host xxx.xxx.xxx.xxx
object network HYPER-V-DUAL-IP
range 10.0.1.1 10.0.1.2
object network LAN-10-0-1-X
access-list 100 extended permit tcp any4 object HYPER-V-DUAL-IP eq 3389 inactive
access-list 100 extended permit tcp object Company-IP1 object HYPER-V-DUAL-IP eq 3389
access-list 100 extended permit tcp object Company-IP2 object HYPER-V-DUAL-IP eq 3389
tcp-map Normalizer
check-retransmission
checksum-verification
no pager
logging enable
logging timestamp
logging list Threats message 106023
logging list Threats message 106100
logging list Threats message 106015
logging list Threats message 106021
logging list Threats message 401004
logging buffered errors
logging trap Threats
logging asdm debugging
logging device-id hostname
logging host Internal 10.0.1.11 format emblem
logging ftp-bufferwrap
logging ftp-server 10.0.1.11 / asa *****
logging permit-hostdown
mtu Internal 1500
mtu External 1500
ip verify reverse-path interface Internal
ip verify reverse-path interface External
icmp unreachable rate-limit 1 burst-size 1
icmp deny any echo External
asdm image disk0:/asdm-711.bin
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
object network obj_any
nat (Internal,External) dynamic interface
object network LAN-10-0-1-x
nat (Internal,External) dynamic interface
object network HYPER-V-DUAL-IP
nat (Internal,External) static interface service tcp 3389 3389
access-group 100 in interface External
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa-server radius protocol radius
aaa-server radius (Internal) host 10.0.1.11
key *****
radius-common-pw *****
user-identity default-domain LOCAL
aaa authentication ssh console radius LOCAL
http server enable
http LAN-10-0-1-x 255.255.255.0 Internal
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec ikev2 ipsec-proposal DES
protocol esp encryption des
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal 3DES
protocol esp encryption 3des
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES
protocol esp encryption aes
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES192
protocol esp encryption aes-192
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES256
protocol esp encryption aes-256
protocol esp integrity sha-1 md5
crypto ipsec security-association pmtu-aging infinite
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev2 ipsec-proposal AES256 AES192 AES 3DES DES
crypto map External_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map External_map interface External
crypto ca trustpoint srv01_trustpoint
enrollment terminal
crl configure
crypto ca trustpoint asa_cert_trustpoint
keypair asa_cert_trustpoint
crl configure
crypto ca trustpoint LOCAL-CA-SERVER
keypair LOCAL-CA-SERVER
crl configure
crypto ca trustpool policy
crypto ca server
cdp-url http://.../+CSCOCA+/asa_ca.crl:44435
issuer-name CN=...
database path disk0:/LOCAL_CA_SERVER/
smtp from-address ...
publish-crl External 44436
crypto ca certificate chain srv01_trustpoint
certificate <output omitted>
quit
crypto ca certificate chain asa_cert_trustpoint
certificate <output omitted>
quit
crypto ca certificate chain LOCAL-CA-SERVER
certificate <output omitted>
quit
crypto ikev2 policy 1
encryption aes-256
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 10
encryption aes-192
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 20
encryption aes
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 30
encryption 3des
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 40
encryption des
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 enable External client-services port 44455
crypto ikev2 remote-access trustpoint asa_cert_trustpoint
telnet timeout 5
ssh LAN-10-0-1-x 255.255.255.0 Internal
ssh xxx.xxx.xxx.xxx 255.255.255.255 External
ssh xxx.xxx.xxx.xxx 255.255.255.255 External
ssh timeout 5
ssh version 2
console timeout 0
no vpn-addr-assign aaa
no ipv6-vpn-addr-assign aaa
no ipv6-vpn-addr-assign local
dhcpd dns 75.153.176.9 75.153.176.1
dhcpd domain ingo.local
dhcpd option 3 ip 10.0.1.254
dhcpd address 10.0.1.50-10.0.1.81 Internal
dhcpd enable Internal
threat-detection basic-threat
threat-detection scanning-threat shun except ip-address LAN-10-0-1-x 255.255.255.0
threat-detection statistics access-list
threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200
dynamic-filter use-database
dynamic-filter enable interface Internal
dynamic-filter enable interface External
dynamic-filter drop blacklist interface Internal
dynamic-filter drop blacklist interface External
ntp server 128.233.3.101 source External
ntp server 128.233.3.100 source External prefer
ntp server 204.152.184.72 source External
ntp server 192.6.38.127 source External
ssl encryption aes256-sha1 aes128-sha1 3des-sha1
ssl trust-point asa_cert_trustpoint External
webvpn
port 44433
enable External
dtls port 44433
anyconnect image disk0:/anyconnect-win-3.1.02026-k9.pkg 1
anyconnect profiles profile1 disk0:/profile1.xml
anyconnect enable
smart-tunnel list SmartTunnelList1 mstsc mstsc.exe platform windows
smart-tunnel list SmartTunnelList1 putty putty.exe platform windows
group-policy DfltGrpPolicy attributes
vpn-tunnel-protocol ikev1 ikev2 l2tp-ipsec ssl-client ssl-clientless
webvpn
anyconnect profiles value profile1 type user
username write.ingo password ... encrypted
username ingo password ... encrypted privilege 15
username tom.tucker password ... encrypted
class-map TCP
match port tcp range 1 65535
class-map type regex match-any BlockFacebook
match regex BlockFacebook
class-map type inspect http match-all BlockDomains
match request header host regex class BlockFacebook
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 1500
id-randomization
policy-map TCP
class TCP
set connection conn-max 1000 embryonic-conn-max 1000 per-client-max 250 per-client-embryonic-max 250
set connection timeout dcd
set connection advanced-options Normalizer
set connection decrement-ttl
policy-map type inspect http HTTP
parameters
protocol-violation action drop-connection log
class BlockDomains
policy-map global_policy
class inspection_default
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect dns preset_dns_map dynamic-filter-snoop
inspect http HTTP
service-policy global_policy global
service-policy TCP interface External
smtp-server 199.185.220.249
privilege cmd level 3 mode exec command perfmon
privilege cmd level 3 mode exec command ping
privilege cmd level 3 mode exec command who
privilege cmd level 3 mode exec command logging
privilege cmd level 3 mode exec command failover
privilege cmd level 3 mode exec command vpn-sessiondb
privilege cmd level 3 mode exec command packet-tracer
privilege show level 5 mode exec command import
privilege show level 5 mode exec command running-config
privilege show level 3 mode exec command reload
privilege show level 3 mode exec command mode
privilege show level 3 mode exec command firewall
privilege show level 3 mode exec command asp
privilege show level 3 mode exec command cpu
privilege show level 3 mode exec command interface
privilege show level 3 mode exec command clock
privilege show level 3 mode exec command dns-hosts
privilege show level 3 mode exec command access-list
privilege show level 3 mode exec command logging
privilege show level 3 mode exec command vlan
privilege show level 3 mode exec command ip
privilege show level 3 mode exec command failover
privilege show level 3 mode exec command asdm
privilege show level 3 mode exec command arp
privilege show level 3 mode exec command ipv6
privilege show level 3 mode exec command route
privilege show level 3 mode exec command ospf
privilege show level 3 mode exec command aaa-server
privilege show level 3 mode exec command aaa
privilege show level 3 mode exec command eigrp
privilege show level 3 mode exec command crypto
privilege show level 3 mode exec command ssh
privilege show level 3 mode exec command vpn-sessiondb
privilege show level 3 mode exec command vpnclient
privilege show level 3 mode exec command vpn
privilege show level 3 mode exec command dhcpd
privilege show level 3 mode exec command blocks
privilege show level 3 mode exec command wccp
privilege show level 3 mode exec command dynamic-filter
privilege show level 3 mode exec command webvpn
privilege show level 3 mode exec command service-policy
privilege show level 3 mode exec command module
privilege show level 3 mode exec command uauth
privilege show level 3 mode exec command compression
privilege show level 3 mode configure command interface
privilege show level 3 mode configure command clock
privilege show level 3 mode configure command access-list
privilege show level 3 mode configure command logging
privilege show level 3 mode configure command ip
privilege show level 3 mode configure command failover
privilege show level 5 mode configure command asdm
privilege show level 3 mode configure command arp
privilege show level 3 mode configure command route
privilege show level 3 mode configure command aaa-server
privilege show level 3 mode configure command aaa
privilege show level 3 mode configure command crypto
privilege show level 3 mode configure command ssh
privilege show level 3 mode configure command dhcpd
privilege show level 5 mode configure command privilege
privilege clear level 3 mode exec command dns-hosts
privilege clear level 3 mode exec command logging
privilege clear level 3 mode exec command arp
privilege clear level 3 mode exec command aaa-server
privilege clear level 3 mode exec command crypto
privilege clear level 3 mode exec command dynamic-filter
privilege cmd level 3 mode configure command failover
privilege clear level 3 mode configure command logging
privilege clear level 3 mode configure command arp
privilege clear level 3 mode configure command crypto
privilege clear level 3 mode configure command aaa-server
prompt hostname context
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:41a021a28f73c647a2f550ba932bed1a
: end
Many thanks,
IngoHi Jose,
here is what I got now:
ASA(config)# sh run | begin tunnel-group
tunnel-group DefaultWEBVPNGroup general-attributes
address-pool VPNPool
authorization-required
and DAP debugging still the same:
ASA(config)# DAP_TRACE: DAP_open: CDC45080
DAP_TRACE: Username: tom.tucker, aaa.cisco.grouppolicy = DfltGrpPolicy
DAP_TRACE: Username: tom.tucker, aaa.cisco.username = tom.tucker
DAP_TRACE: Username: tom.tucker, aaa.cisco.username1 = tom.tucker
DAP_TRACE: Username: tom.tucker, aaa.cisco.username2 =
DAP_TRACE: Username: tom.tucker, aaa.cisco.tunnelgroup = DefaultWEBVPNGroup
DAP_TRACE: Username: tom.tucker, DAP_add_SCEP: scep required = [FALSE]
DAP_TRACE: Username: tom.tucker, DAP_add_AC:
endpoint.anyconnect.clientversion="3.1.02026";
endpoint.anyconnect.platform="win";
DAP_TRACE: Username: tom.tucker, dap_aggregate_attr: rec_count = 1
DAP_TRACE: Username: tom.tucker, Selected DAPs: DfltAccessPolicy
DAP_TRACE: Username: tom.tucker, DAP_close: CDC45080
Unfortunately, it still doesn't work. Hmmm.. maybe a wipe of the config and starting from scratch can help?
Thanks,
Ingo -
My wife got an ipad air model A1474 (WIFI only) in an airport shopping centre. She needed connectivity what can we do now to correct this mistake as the model is a mismatch for our environment in Nigeria where WIFI is not common
Mifi devices are usually quite small. Think Credit Card size, and maybe slightly thicker. So not really a big device you need to carry around.
In any case if you are still within the 14 day return period you may be able to return it to an Apple retail store. It needs to be an Apple Owned store, not sure Authorized Resellers will let you do it.
Other than that, bob points out, you may want to try to use the iPhone as a hotspot for the iPad. If your Carrier supports it. Like the Mifi device, the iPhone will share its cellular internet connection out to other devices over a Wireless network the iPad can use. -
My iPhone wont let me download some apps that i have payed for on on my account; it says my iPhone is not authorized for this computer, but it is.
No, iTunes never says an iPhone is not authorized.
This is occurring on a computer, correct?
Is the computer authorized for the account the media or apps were acquired with? -
Full message that pops up
"The iPod could not be synced because this computer is no longer authorized for purchased items that are on this iPod.
To authorize this computer for items purchased from iTunes Store, choose Store > Authorize This Computer."
I am unable to sync my music, applications, movies, etc. to my iPod touch. The only way I am able to bypass the message that pops out when I try to sync (the one in the title) is by clicking "Apply" instead of "Sync". To do this, I make changes to Apps, Music, or Movies (...) and the buttons "Revert" and "Apply" will replace the button "Sync".
My problem is most likely not due to using many accounts because I only have one and it is the only one that I use. I do not share accounts with my family members. Still, I have tried everything here, nothing has worked for me. Since I don't often listen to Podcasts, I have deleted them from my iPod. I have no idea why I am unable to sync and no one seems to have the same problem as me.
Thank you for your help in advance.
Details
iPod touch, 5th generation
iOS 8.1.2
iTunes 12.0.1.26
Windows 8
Purchases
Pre-ordered album "Froot" purchased from the account that is authorized to my computer
Podcast "Not Too Deep with Grace Helbig" also purchased from the account that is authorized to my computerTry backing up to iTunes and restoring from that backup
-
Hi I have a macbook pro (late 2011) running on Yosemite and an iPhone 5s running iOS 8.1.2 and I have never had a problem until tonight. I wanted to sync my iPhone to add mew music but upon syncing I keep getting a pop up message saying "THE IPHONE " " COULD NOT BE SYNCED BECAUSE THIS COMPUTER IS NO LONGER AUTHORIZED FOR PURCHASED ITEMS ON THIS PHONE" and tells me to go to the store tab on the top and to authorize this computer and every time I do it says computer is already authorized. I will also mention that my iTunes account is the only account that is used on my Mac and it is the only account I've used on my iPhone. Ive synced them plenty of time with no problems. I have never came across this message before and now my iPhone won't sync. I have been online for an hour now looking for solutions but I haven't found any that successfully worked. Ive rebooted both my Mac and iPhone with no success. ow for some reason when I plug my iPhone in it does not even charge but my Mac reads it and it shows up in the iTunes store so I tried syncing it again 1 more time snap it just gets stuck on step 1. I must also say state that is did successfully back up but absolutely will not sync. Can anybody please help me out without resetting my iPhone. Thanks
Thanks Gail but ive tried that as well as logging oht and back into my accounts on my iphone and mac but I still get that message. I actually found a solution by unckecking my synced music playlist and clicking sync to remove it and then reclicked on my playlist to sync and it actually synced notmally and I got all of my new songs so I wanted to test it again so I clicked on sync again and the message once again popped up until I did the un-syncing and re-syncing again. I guess I will keep doing that in the future even though its annoying but its better than resetting my iphone.
-
IPad could not be Synced because it is no longer authorized for purchased items that are on iPad
I recently purchased an IPAD AIR and synced ir with my comuter. 14 days later I try and SYNC it and I get a message " The IPAD could not be synced because this computer is no longe authorized for purchased items that are on this IPAD. The apple id's are the same and only 2 devices authorized. Meessage states to go to STORE and Authorize Computer. When I do I get a Message it is already authorized
The problem appeared to be a Pending Request on the IPAD for the new ICLOUD option to share Keychain. I cleared that up and it appears that fixed the issue. Thanks for your help
-
My computer was stolen so I deauthorized all computers that had iTunes on them on 10/28/2011. I have a new computer and it was authorized for iTunes. When I checked my account it says I have 2 authorized computers, but this new computer should be the only one. How can I deauthorize whatever the other computer is? I don't want whoever stole my old computer to be able to use my iTunes account.
Get all that music back in itunes and sync again.
-
For a couple months now, every movie purchase through iTunes fails to transfer to my iPhone or iPad giving me the error: "some of the items in the iTunes library, including were not copied to the iPad because you are not authorized for them on this computer". I have read many forums about deleting, reinstalling, de-authorizing and authorizing my iMac through the iTunes store. Many suggestions don't work except to rename the movie to *.MP4 in Finder under the iTunes movie directory. I imagine this is a setting or a bug somewhere... any suggestions on how to bypass having to rename the files in Finder? My research into Google suggests this problem dates back to 2007 or so but it is now more prevalent than ever.
Thanks.Try:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases -
No Authentication for application but need to be authorized for few pages
Hi,
I am new to the security concepts of APEX. Could you please assist me if my below requirement could be acheived, if so how?
My application has 'No Login Authentication' schema selected which makes it open for any user, and this is as per our requirement. I have few pages which have to be accessed only by
* Administrator
* Higher Management team
* Some pages where any enduser need to login (for instance, for posting any query, I would require to know the owner of the query for which I require the user to be authenticated and further have email communications)
Any assistance in this regard is much appreciated.
Thanks & regards,
AnasuyaAnasuya,
You need to select an appropriate authentication scheme based on how you want to authenticate users and then make all pages "public" except for those that require authenticated access. For those authenticated pages, you can then assign authorization scheme to limit which authenticated users are authorized for each page.
Scott -
We have developed a desktop application using Flash software and published the same for MAC environment. When we double click on the index.app file, the application is working perfectly in Mac 10.6.7 at our office. But if the same index.app file is double clicked in Mac 10.6.7 at out clients location, its not opening. For your information the client is able to open this same application by double clicking on index.swf file. The main problem is that client is not able to open the application using index.app file at their office whereas we are able to do so at our office. Can anyone give some suggestions to sort this problem?
The most common reason is different versions of Flash, or different versions of web browsers used. Some users may elect to not have Flash installed at all because of the processor overhead of Flash. If you are going to make an application for a client, check what operating system and browser versions they are using first. Then determine if a stand alone application is required, or if they have the necessary plugins to run specific browser enhanced code.
P.S. MAC is an acronym for Media Access Control. Mac is the shorthand for Macintosh, the operating system and computers made by Apple Inc. -
I want to give my wife and daughters their own Apple ID's and have them purchase stuff using the new one, but I don't want them to lose all of the music and videos they bought using my ID for the last 8 years.
The main reason I want to do this, is so that when iCloud comes out, I heard that the synching feature is going to be keyed to your Apple ID. My wife, and both of my daughters have always just used my ID to buy everything, and I'm affraid all of our Macs and iPhones and iPods will synch together.
If I gave each of them their own ID, and they started buying all of their music on the new ID, could their Macs be authorized for the new ID and mine at the same time? It would still be under the 5 computer limit per account.
Thanks,
KevinBatmanFD wrote:
could their Macs be authorized for the new ID and mine at the same time?
yes, a single iTunes can be authorized for up to five Apple ID's. -
I was trying to sync my itouch with my new mac, and some songs won't download because they are not authorized for this computer. But even after my computer was authorized they still won't sync. How do I fix this?
I have the same problem. It is only with tv shows and only with programs I have downloaded after the software update.
Apple support sent me the above link too....but it doesn't solve the problem...my computer is authorized and the content is in my library and will play on my Mac air, but it will not sync the tv shows, it keeps saying my computer isn't authorized for it.
No answers here, but you are definitely not alone with this issue. -
How can I retrieve purchased tunes not authorized for my computer?
I am told I have 79 purchased tunes from I Tunes Store that were not copied on to my computer because my computer was not authorized for those tunes. How did this happen & how can I correct the problem?
Sorry, but I'm not sure what you mean. Did you copy tracks from one computer to another, and if so by what means?
-
Not authorized for this computer
I just got a new laptop and downloaded iTunes.Then I downloaded Alice In Wonderland from iTunes using a digital copy disc I bought with the DVD. Every time I try to put it on my iPod it tells me it was "not copied to my iPod because it was not authorized for it on this computer." I am not computer savvy so I haven't figured out how to get it authorized. Does anyone know how I can?
Salut!
I have seen similar messages pretty much all the time. The only thing that helps is activating the computer before starting to sync the iphone.
The really annoying thing is, if I don't do that, iTunes will randomly decide that some apps are not authorized and will happily uninstall them.
I wonder what's going on there
cheers
Majello
Maybe you are looking for
-
[Solved] Subdomain no Database Access (MySQL)
I'm confused about the missing database connection, I have added a screenshot that explains the problem. http://postimage.org/image/f1u804lp7/full/ (1920x1080) Running Apache, MySQL, PHP, Memcache, System hostname localhost.localdomain (127.0.0.1) Op
-
Why am I unable to use the Adobe Send application
I am unable to fill in forms, add text or send a form, whereas I used to be able to do this. I have an Adobe Account with a User ID and password. Isn't Adobe a Certified Document Service?
-
Downloading and installing applications
I can download applications via the web browser but cannot get them to install - specifically, I am trying to install FLIP4MAC so I can play Windows Media files via Quicktime. I download to the desktop and when I double click to install it keeps aski
-
Log4j and Jboss are acting weird
This question is reagards to Log4j and JBoss and I thought this is the best place to ask this question. I am using Jboss 3.2.3. My purpose was to log messages in a seperate file "developer.log" using Log4j. These messages has to be logged in this fil
-
My 8 year old XP coumputer crashed . my Ipodmusic library is lost. my 30 gb ipod has all the music and i haave no other back up. how do I recover the music to my new windows 7 computer?