Authorisation as per the Personal Sub Area

Hi Gurus,
I want to give authorisations as per the Personnel Sub Area to view master data(PA30).
But in Authorisations (T-Code PFCG) i am able to give authorisation as per Personal area.
So please guide me to solve this problem.
Thanks in advance.
Abay

Hello Abay,
You can use the authorization object P_orgin to give the authorization on Persanal area. This object needs below values fill according to your requirement.
AUTHC
INFTY
PERSA
PERSG
PERSK
SUBTY
VDSK1
This authoriation you have to give in addition of the S_Tcode value PA30.
Hope it will help let me knwo if you still have the question.
Regards
Vikas

Similar Messages

Authorization restriction by personal sub area wise

Dear Friends,
Can i restrict HR user by personal sub area. Currently i was restricted by personal area wise. But current requirement is personal sub area wise.
Which object is to be created .
Please reply urgently.
Thanks,
Regards,
Sachin

HI Alex,
The standard PA authorisations P_ORGIN and P_ORGINCON do not have Personnel Subarea restrictions available unfortunately. Your only standard options are Personnel Area, Employee Group and Employee Subgroup.
You could possibly do something using the Organisational Key field with allows you to essentially define a customised field restriction within the P_ORGIN or P_ORGINCON object. My advice would be to try and work around this though as Org Key restrictions can get very complex if you are not careful and can be difficult to maintain as a result.
Hope this helps.
Best Regards,
Richard

Personal Sub Area

Hi,
I want to add a personal sub area to the existing list in SAP R/3. What transaction(s) are involved?

Hi,
Tcode EC11.
IMG -> Enterprise Structure -> Definition -> HRM -> Personal Subarea.
Select your Personal Area and include your required PSA in that.
Good Luck
Om
Reward it, if you feel helpful.

Config change-certain plans for specific personal sub-area

Hi,
I have a requirement like, currently there are 3 health plans configured in the system for the employees of the company. It is open for all the personal areas and sub-areas.
Now there is a requirement to change the config as follows:-
The plans (2 health plans and 1 dental plan) should be available only for sunnyvale employees. How do I make these changes so that the plans are available only for employees of sunnyvale personal sub-area. (Personal area=California and personal sub-area= sunnyvale)
Need your guidance at the earliest. Kindly help.
Thanks

Thank you for your reply.
Let me explain again
Currently, there are 3 health plans configured in the system as follows
Plan Type: Medical & Dental
They are a total of 3 plans which are right now available to all the employees of California.
I need to make the following changes w.r.t to the following details
Personal area = California
Personal subarea=Sunnyvale
Emp group=full, temp, intern, retired
Emp subgroup=full, part
I need the above mentioned 3 plans to be available to only the employees of sunnyvale and not the entire california.
I don't know where to go and make the changes so that the plans are available only for the employees of sunnyvale (And not for all the employees of California)
Hope this explains the scenario.
Thank you

If both you and the person you are texting have iMessage, and that person's phone is dead... Will it/Can it still be sent as an imessage? I am getting different answers from people. I want to know if this person was being untruthful about there phone bein

If both you and the person you are texting have iMessage, and that person's phone is dead... Will it/Can it still be sent as an imessage? I am getting different answers from people. I want to know if this person was being untruthful about there phone being truthful.

IF that is the only iDevice activated for that recipient, then no. It should not successfully send as an iMessage if the phone is powered off or has no data connection. If you have Send as SMS turned on, it should automatically fallback to SMS after a few minutes. Of course, they won't get this until they power on their phone, assuming they have a text messaging plan with their carrier.

"The person you are trying to reach...."

Whenever people try to call me, they often receive the following automated message, "The person you are trying to reach is not accepting calls at this time. Please try your call again later." The message is repeated in Spanish, and then an error code is given: 24GA01GN.
This happens even when my phone is turned on and receiving a good signal.
Any ideas what is causing this and how to fix it?

DannyD wrote:
Thanks for this suggestion. How do I access Parental Controls? Is that something I change on the handset? Or via accessing my Verizon on-line account settings?
Thanks,
Danny
Hi there! You can click here to access Usage Controls and use the 'Sign In' link to view the parental controls settings. If you do not have the controls set up, please PM me directly so I can help you directly to get the incoming call issue resolved.
Thank you! Have a great weekend!

Does the iPhone let the caller know if the person thry are trying to call is on another call

Does the iPhone let the caller know if the person thry are trying to call is on another call. Both are using iphones

Liamcallum wrote:
Surely would be better to get sorry the person you are trying to call is on another call.....
Why? It doesn't change the fact that they are not answering my call. If they want to let me know why, they will.
It used to be the case that my carrier would put a beep at the end of the ring tone if the person you were calling was on another call. But they stopped it ages ago.

Wage type permissiblity per personal sub area

hi gurus
can anybody tell me what is meaning of 0 to 9 numbers in define wage type permissiblity for each PS and ESG

Your other thread PERSONAL SUBAREA GROUPING FOR PRIMARY WAGE TYPE and this one are related...
Basically you handle a grouping of PA/PSA or EG/ESG and give it a value of 0 - 9. Using that grouping value, you determine permissibility for it.
For example you personnel area is 111 and personnel sub area is FNC and you give it a value of PS grouping 1...
You then do the same grouping to the EG and ESG and give it a grouping of 1...
When you go to Permissibility of Wage Types
SPRO -> PM -> PA -> Payroll Data -> Basic Pay -> Wage Types -> Check Wage Type Catalog -> Define Wage Type Permissibility for each PS and ESG
or known as table V_511_B
You then set this to the wage type...
The person has to belong to PS grouping (111 and FNC) and ES Grouping (whever you set as a combo) to be eligible to use that wage type

Is there a way to mute video in FaceTime while watching the video of the person you are calling using the MacBook Pro?

I am using FaceTime to look in on a meeting being held on the other end, but I don't want the people on the other end to be able to see me. Is there a way to disable the camera while watching on FaceTime on my MacBook Pro?

First of all, if you want to run video inside a .pdf on an iPad, you should be aware that the Adobe Tablet and Mobile reader does NOT support rich media ( audio or video ). Despite trying to encourage Adobe to 'get real', it seems that they have no intention to do so in the short term. SO ... I have been working with a company called Readdle, and beta testing their 'PDF Expert' application, and it is probably the most sophisticated .pdf reader for iOS on the market.
It supports rich media, and certain levels of JavaScript that are particularly useful for this kind of work.
However, if all you want to do is insert video into a single .pdf document, that will run on iOS ( with 'PDF Expert only' ) as well as desktop Mac or PC, the video needs to be h264 .mp4 format ( basically avoid ANY based Flash content for iOS ).
You should also note, that active Buttons ( not hyperlinks, which are different ) which you might wish to create in say InDesign or even Acrobat, need to be made up of just imagery (and that also means converting your text to outlines ). However, this is only necessary for iOS with PDF Expert. Also be aware that I have not done much work which includes .pdf on Android.
I do think though that if you stick with basic navigation, avoid active 'Layers' authoring and only want to run simple video, the h264 .mp4 encoding is going to work across ALL platforms.
If you want to have a look 'under the hood' of an example, please DOWNLOAD and save this item
https://dl.dropboxusercontent.com/u/11563257/3.%20Interactive_iPad_test_for_PDF_EXPERT.pdf

Personnel Sub areas as per the departments...

Hi
is it correct to have personnel subareas acoording to department wise. ex :- Can hr, finance, sales departments be made as personnel subareas in enterprise structure. ???
Regards
Mohammed

Hi,
Personnel Subareas are the subdivision of Personnel Area and it is a must to define a pay scale area, pay scale type and one holiday calendar for each personnel subarea.
It is also important to keep the control features in mind while defining the personnel sub area:
1. Specifying the country grouping; this controls the dialog for entering country-specific personnel data and the setting up and processing of wage types and pay scale groups in Payroll; within a company code, the country grouping must be unambiguous
2. Assigning a legal entity to differentiate between the individual companies from a legal point of view
3. It specifies groupings for Time Management. This enables you, for example, to set up work schedules, substitution types, absence types, and leave types on the basis of a specific personnel subarea.
4. The personnel subarea is a selection criterion for evaluations.
5. The personnel subarea is used to generate default values for pay scale area and pay scale type for an employeeu2019s basic pay.
6. It specifies the public holiday calendar.
7. Defining personnel subarea-specific wage types per personnel area
8. It assigns a legal person for payroll.
Hope this helps.
Thanks
Ranjeeta

Sending email in work flow to the persons overdue

Hi,
After every activity in workflow an email is being sent to the person who has created it. But now I want an email to be sent to the persons who are overdue with that particular activity.
Please suggest me the answers.
Thanks & Regards
Message was edited by: Kiran Kuriseti

Hi Kiran,
in your workflow step (transaction swdd) there´s the possibility to maintain different deadlines, for example the latest start deadline. They all work quite similar to each other. You can maintain a reference Time / date, then you can determin the period of time that has to be monitored.
For example the workitem was created at noon on monday, if the receiver has not taken an activity at noon the following day, an notification should be created.
Refer.date/time WIS Work Item Creation
Time
+ 24 HR Hour(s)
Than you can enter the recipient. This can be done per person, org unit, or even an expression, formulate a description in the box below.
That should do.
Please keep in mind, that in transaction SWU3 the Background Job for Missed Deadlines is in Status active.
Hth
Ute

How do you shadow a phone and is it possible for the person your shadowing to be able to tell?

How do you shadow your phone and is it possible for the person you are shadowing to tell?

Shadow? Are you referring to tracking the phone? If it is your phone, how are you tracking it? Are you talking about a stolen device?

How to get the Personas Rotator add-on to work with new Firefox themes?

Before Firefox changed from personas to themes, the Personas Rotator add-on automatically switched personas at a set interval (ie. every 1 minute). I presently have Firefox 12.0 installed as well as the latest versions of both Personas Plus and Personas Rotator but the rotator does not work.
Before it was necessary to sign into My Favorites for the add-on to rotate my favorite personas, but now when I sign in, there is no rotation. Only one persona/theme that is enabled stays on the screen. There is no automatic rotation.
Private browsing mode is not selected. How can I get Personas Rotator to work again? Thank you.

Good news! The Personas Rotator is now working again and switching personas automatically at 1 minute intervals.
It began working again after I went to the 'Appearance' tab under 'Add-ons' and removed all the personas listed there (these are ones I 'Added to Firefox' from My Favorites list which is accessed after signing in to the gallery).
But now I see that the personas that are presently being rotated are appearing in the 'Appearance' tab as well. I wonder if it will be necessary to 'remove' all these later to have them rotate again. Will post an update later for anyone having this same problem.

I have 2 iPhone 4S's, one is personal, one purchased by work for me. Can I use the same iTunes account to sync both phones while keeping the contacts that are synced as separate lists for personal phone and work phone, but also allow same apps for both?

I'm hoping someone out there knows if I can use 1 apple ID and 1 iTunes account to sync 2 different iPhone 4S's - one for personal use, and one for work use. I would like to be able to sync with the same music and app's on both, but need to keep the contacts and calendars completely separate between the 2 phones since I don't want personal data on the work phone or work data on the personal phone. Can you help me figure this out?

Yes!
Luckily, if you be very careful and pay attention to what you have selected in itunes, you can separate these things
Basically, in iTunes, there are tabs at the top for Summary, info, apps, etc..
These tabs control PER DEVICE what syncs between itunes and the device.
Therefore, you can plug iPhone 4S #1 in, and select to sync contacts with address book, then do so. Then plug iPhone 4S #2 in, and not choose to sync with address book. iTunes will keep these settings separate. However, in that situation for music and apps, you would check to sync both on both, in order to get all music and apps on each.
The only thing to watch out for, each computer 'user' has only one set of address book and ical, meaning that if you want to sync both phones to the computer, but dont want to mix contacts, only one phone will be able to sync contacts and/or calendars. Basically, each category in the Info tab will only hold one device's information, so you CAN do contacts with iPhone 4S #1, and calendars with #2.

Can i view customer report as per the business area wise , region-wise how?

can i view customer report as per the business area wise , region-wise how?

Hi,
You can view the report business area wise, extract the report and go to dynamic selection and selection business area. When the report is display just sub total on business area. System is showing report as per your requirement.
Regards,
Pankaj

Authorisation as per the Personal Sub Area

Similar Messages

Maybe you are looking for