Authorisation on IP based on query

Hi all,
I have a problem with restriction on Integrated planning queries.
Starting situation:
End user role should give report authorisation to the IP cube for all queries.
Aim:
Create on same IP cube different queries with IP planning functionalities.
Authorisation should be based on the query names.
What I found when trying to do this using combination of S_RS_COMP and RSECADMIN.
As end user has authorisation to run all reports from the end user role the restriction on queries in an additional role in S_RS_COMP will not work. In RSECADMIN there is no option to restrict on query as 0TCTQUERY is not working as authorisation relevant in BW system.
Any idea how to resolve this without changing end user role?
Br
Stefan

Hi
I have the same issue, but cisco have advised me the codecs in the ios routers don't support video yet, but watch this space. I had to spend the money on a 3500e.
Regards
dave

Similar Messages

Print layout designer for develop report based on query

Dear Experts/Gurus,
I am amazing about the manage previous reconciliation report. When I opened it using print layout designer, it looks like the report is not built using query, but I am not sure yet. This is very confusing. I created query similar with manage previous reconciliation (MPR), but when I link the query to print layout and try to make similar format/appearance with MPR report (reconciliation management (system)), it is not success.
Isn't the MPR report built not based on query ? I appreciate your answer. TIA
Rgds,

Hi,
I am not sure I understand what's the problem:
Is it the layout that is different or the data?
Regarding the data you can use SQL Profiler (maybe you did?) to find out what queries are fired, but please note that there are some stored procedures in the DB that are used for some specific functions - not sure whether the "MPR" uses any of these.
Then you must include some non-default filter in SQL Profiler...
...but you can also use the logging functionality in B1 for that purpose:
Just activate the logging (see the "log" folder in the B1 subdirectory) in the corresponding config file: choose the option to have the SQLs logged in conjunction with the logging being triggered in all cases (not just error).
Thus you will get all the SQLs - just plain - from the B1 application, but note that it will obviously slow it down!
HTH,
Frank

Adding a custom meta data field which lists out content id based on query

How can we add a custom meta data filed which lists out content id based on query like dDocType <matches> `AssociatedProduct`?
Or other alternative would be to have a custom metadata field such that it allows selection of content id using link wizard which we typically use in site studio. It would be preferable to have this second option as it is user friendly. Can we do this on a check-in screen?
-Pratap

Thanks for the reply Deepak.
We got it resolved. We did following changes in /ucm/custom/SiteStudio/resources/ss_custom_field_resources.htm file and it worked cleanly.
Added following section at the end before body tag
===================================================================================================
<@dynamichtml ss_parent_definition_field_entry@>
     <$include super.std_edit_entry$>
     <$if isQuery and isTrue(isQuery)$></td><td><$endif$>
     <$include ss_contributor_base_scripts$>
     <script type="text/javascript" src="<$HttpRelativeWebRoot$>resources/<$SSContributorSourceDir$>/sitestudio/wcm.contentserver.popup.js"></script>
     <script language="JavaScript">
     function OnSelectParentId()
          var selectParentIdOptions = {};
          selectParentIdOptions.httpCgiPath = '<$HttpCgiPath$>';
          selectParentIdOptions.queryText = 'dDocType <matches> `Country`';
          selectParentIdOptions.coreContentOnly = '<$if coreContentOnly and isTrue(coreContentOnly)$>1<$else$>0<$endif$>';
          selectParentIdOptions.callback = function( returnParams )
               returnParams = returnParams || {};
               if( returnParams && returnParams['dDocName'] && ( returnParams.dDocName.length > 0 ) )
                    // Set the actual metadata value
                    <$if isQuery AND isTrue(isQuery)$>
                         for (var i=0; i < document.<$formName$>.elements.length; i++)
                              var elt=document.<$formName$>.elements;
                              if (elt.name=="<$fieldName$>")
                                   elt.value = returnParams.dDocName;
                    <$else$>
                         document.<$formName$>.<$fieldName$>.value = returnParams.dDocName;
                    <$endif$>
          WCM.ContentServerPopup.ChooseManagedDocument(selectParentIdOptions);
     </script>
     <input type="button" value="<$lc("wwBrowse")$>..." onclick="OnSelectParentId();">
<@end@>
======================================================================================
Then modified the section which show xWebsiteSection, xRegionDefinition etc to include my custom meta data defitnion as well ('xParentContentType')
===================================================================
<@dynamichtml std_edit_entry@>
     <$if fieldName and ( fieldName like "xWebsites|xDontShowInListsForWebsites" )$>
          <$include ss_website_query_text_field$>
     <$elseif fieldName and strEquals( fieldName, "xWebsiteSection" )$>
          <$include ss_website_section_field_entry$>
     <$elseif fieldName and strEquals( fieldName, "xRegionDefinition" )$>
          <$include ss_region_definition_field_entry$>
     <$elseif fieldName and strEquals( fieldName, "xParentContentType" )$>
          <$include ss_parent_definition_field_entry$>
     <$else$>
          <$include super.std_edit_entry$>
     <$endif$>
<@end@>
====================================================================
This worked fine.
Regards,
Pratap

ADF dynamic ViewObject based on query. how to get attributes?

hi.
i have an read-only view object based on query like this:
SELECT :func(:paramm) as EMP_SAL from dual
and set :func & :paramm parameter by vo.setNamedWhereClauseParam(..) function.
but i couldn`t get EMP_SAL attribute after executeQuery command.
in another case i would set new whole Query by vo.setQuery(..) but the problem exists.
please help me. how to get attribute in such vo objects!
thanks!
Morena!

thanks to Quick reply!
i seek into code and found a uninitialized Parameter in view object. error has gone after correct the problem!
and now could get the attribute value.
thanks so much!
/\/\ o r e n a!

Approval Procedure based on query

Dear All,
I'd like to make approval procedure based on query. The condition is when the AP Invoice document created based on GRPO and there's a different Amount (AP Amount <> GR Amount) then it should trigger the approval procedure.
Do you have any idea about the query structure?
Thanks

shobah,
try this below query like this
Select TRUE From OPCH Where DocTotal > 25000
Jeyakanthan

How to embed chart/grafic into bex report (workbook) based on query result?

Hi friends,
Since I have never embedded any Charts/Grafic based on query report, I am wondering if you could share your knowledge?
Thanks for your help in advance!
Regards,
Sally

Hi Sally,
You can create chart into workbook based on the query data.
Execute the query it will show result in excel sheet. In the tool bar of the sheet you find 'Chart wizard' icon . Select the icon, it will ask for the type of the graph. After select the ranges of the data from result. It will display the graph. Then you can save the workbook.
Graphs can be embedded in different sheets.
Hope it helps.
Regards,
Aditya

Fields on single-row Form based on Query

We are implementing a front-end for Oracle Reports using HTMLDB. We have all of our reports and their parameters set up in tables, along with the specification for where to obtain the values to display for the parameters. The tables also specify the display order for the params.
In HTMLDB we need to have the "parameter screen" display when the user selects a report from the tree based on report_id. I created a report based on a query referencing the :p_rpt_id from the tree which lists the parameters for the selected report.
So far no problem. Now, then next step is to implement conditional lists of values on the parameters based on the definitions in the parameters tables.
Some parameters have an unconditional source for values, some have onchange requirement (ie, when you pick a region in p_region the values available in p_customer would include only those in p_region). Each parameter in our table also includes an attribute to specify the type of htmldb_item to render (select list, popup, checkbox etc).
I can get the parameter "report" setup to render the lov's based on the correct sources, but I cannot see where to incorporate the onchange trigger for the "parent" parameters (p_region in the example), or how to get the value from p_region when rendering the lov for p_customer.
Any tips on how to get around this problem?

I think I've managed to work thru the previously stated issues except for one remaining stumbling block:
Test Case:
Report ID: 36
Parameters:
1 Year FISCAL_YR_V
2 Month/Qtr MTH_QTR_V
3 Month FISCAL_MONTH_V
4 Chain ADDR_CHAIN_V
etc.
Params 1,2,4 are generated with htmldb_item.select_list_from_query and htmldb_item.popup_from_query depending on the LOV type specified for the parameter.
Param 3 is also generated by htmldb_item.select_list_from query but its query parameter includes a WHERE clause referencing the value set by param 2 when the onchange event fired.
The problem is the generated lov for param 3 returns no values. Depending on the selection of param 2 (M or Q) the values for param 3 would be 1-12 or 1-4 (respectively). I've tried both of the following in the query for the dependent lov:
where reference_id = :P10_F02
where reference_id = v('P10_F02')
Neither returns any values. I've verified that the correct value for param 2 (M or Q) is being set in the session state by the onchange event on that parameter.
Is there something I'm not setting to cause the query for the dependent lov to bind the new value of P10_F02 when the onchange event fires?

Diplaying of ordsys.ordimage field in a Report based on Query

Hi,
I have a table with a ordsys.ordimage field, where I am uploading images. I created a custom report based on that table but I just cant seem to find a way to show images in it. Could anyone please tell me how to do this.
I tried using this
"portal30.wwv_user_utilities.get_intermedia('CP_IMAGE01','CP_IMAGE01','IMAGE',rowid) the_picture " but this does not help at all
Thanks!
vimpi

Hello Prajwal,
It is definely possible !!
If you have already created your query pls paste the same here so that I can help you otherwise. I will give you a general guidelines and you can take it from there..
Using the CASE Statement inside your SELECT you can achieve this.
SELECT T1.ItemCode AS 'Item No.', T1.ItemName AS 'Item Description',
CASE WHEN T1.QryGroup1 = 'N' THEN T0.Price ELSE 0 END 'List Price'
FROM [dbo].[ITM1] T0 INNER JOIN [dbo].[OITM] T1 ON T1.ItemCode = T0.ItemCode WHERE T0.PriceList = 1

Add a form (based on query) to a form (based on table)

I have a normal form based on a table. I want to put in a little form in a region of this first form that is based on a query. They have one field in common.
How can I do this?
Elsie

Hi Elsie,
Effectively, you want to end up with a single form and save the data back into two or more tables?
If so, you could base the entire form on a SQL view and use an INSTEAD OF trigger to update the underlying tables.
Regards
Andy

LOV based on Query - ORDER BY :P_ITEMVALUE does not work

Hello guys! I have a special request that I'm focussing on. I have a couple of select lists in my application that contain tree species.
On the first page the user has the opportunity to assign a ranking to the respective tree species. The database column storing that information is named INT_BEDEUTUNG.
Instead of using that order by clause continously I want to be able to change the order by definition using two buttons. One is used to order alphabetically (column BA_LANG) and one is used to order by the field INT_BEDEUTUNG.
Hence I tried to bind an item (P6_SORT) via a button, assigning it to either BA_LANG or INT_BEDEUTUNG.
The tree species select lists in my reports are based on LOVs using the following query:
SELECT BA_LANG, LNG_BAUMART
FROM VT_TBL_BAUMART, vt_tbl_BAUMARTENBEDEUTUNG
where CNT_BAUMART = LNG_BAUMART and
LNG_GEBIET=:P6_lng_gebiet
order by :P6_SORTI thought that if :P6_SORT conatins the value BA_LANG or INT_BEDEUTUNG, the selct list would be ordered accordingly. Unfortunately it doesn't, although P6_SORT is not empty?
Do you have an idea what I am doing wrong or how to change the order by clause for that query for the whole application?
I'd appreciate your interesting answers and thoughts!
Best regards,
Sebastian
Edited by: skahlert on 17.09.2009 08:52

@ Roel
Thanks Roel! I believe your suggestion works! Thanks a lot! Great to get such a rapid solution! :-)
Nevertheless I have one more question. I am using 2 html buttons on page 1 with URL-redirect in order to set the item on a specific page. This was for testing purposes only.
Now I just want to set the attribute or value on page one where the respective buttons are placed.
I have other navigating buttons on the same page, which when clicked, bind items on the target page. These should be used throughout the application to forward the item value for P_SORT.
Now the question is - how can I bind an item on page 1 without being redirected? Is there a javascript routine or a simple trick that does the trick???
Thanks again and best regards,
Sebastian

Forms based on query? Is it possible in Oracle Portal?

here is my code that i want to use
SELECT a.first, a.last, b.Position_CD, c.skill_cd, d.team_name, d.team_country, d.club, e.structure_name
FROM Roster a, Roster_position b, roster_skill c, team d, team_structure e
where (a.Roster_ID = b.roster_id (+) and (b.roster_id = c.roster_id (+) ) and (a.team_cd = d.team_cd(+)) and (a.team_structure_cd = e.team_structure_cd (+)))
order by a.roster_id;
Is it possible for oracle portal to support such a query in a form?
Oracle portal supports single tables or views...master-detal...and forms based on procedures.
Since the above query associates with moro then one table..how might one create a form based on that query? Is their a way in oracle portal to create a form and have its record source be based on such a complex query and be able to update and insert data? I know and have tested that it works in Ms Access and i can update and add data in that above query. Hopefully oracle supports this. (*cross fingers*)
If i cant do what i said above...what advice or suggestions you guys have for me? If i use master-detail it won't work right because i need to involve all 5 tables.
Any help or comments are greatly appreciated!

When i made the above query a view and created an oracle portal form. I get this error when I try to retrieve all the records in that view i made above.
An unexpected error occurred: ORA-01445: cannot select ROWID from a join view without a key-preserved table (WWV-16016)
What does the "key-preserved table" mean?

Bug in BC4J test query while creating view based on query

In BC4J while creating a view from query if we test our query , BC4J modify the query with the following one :
"SELECT * FROM ( " + ourQuery + " ) where 1=2;"
so for the Query like "SELECT ename,ename from emp" which is a valid query it modifies it to
"SELECT * FROM ( SELECT ename,ename from emp ) where 1=2;"
which is an invalid Query and BC4J get a SQLException:column ambiguously defined and Test fails
BC4J does this modification in query because it doesn't want to Fetch Data from Database and add the where clause
to the query but in Cases like above this modification doesn't work properly.
one way to solve the problem is by giving alias name to the columns of query.Is there any other way to do the same as my query is completely Valid and i don't want to change it at all ?

Hi Jan,
Actually I am getting my query at run time and based on that I am creating a view.This Query can be given by User of my application and at that time it'll be very painful for me to handle that.
It's definately a Bug in BC4J as they should not modify the query in this way.Thanx for ur interest in my problem.

Form Filter Based On Query Results

How can I create a filter on a form based on the results of a query.
i.e. The Query [ESS_City] looks at the form's field [Current_User] and generate a list of cities [City_ID] that I want to use to match the form [ESS_QUEUE] field [City_ID]
Query Name: [ESS_City]
Query Field: [City_ID]
Form name: [ESS_Queue]
Form Field to filter with: [City_ID]
Thank you,
Mark Matzke

I use criteria in my queries instead of filters.
I would have a combo in the header of the form to select City_ID. Use that combo as criteria in the query that feeds the form. Have an AfterUpdate event to refresh the form.
Build a little, test a little

Different Web Template selection based on query selection values entered

Dear Experts,
We have a very unique requirement in our BI7 system.
There is a web report which comprises of multiple queries and query views embedded in web templates. There are 2 selection parameters F1 and F2 that appear on executing the report.
Our requirement is to display a unique web template to the user based upon his selections. If user enters values for both the fields F1 and F2 then we want to display report output from query views in web template T1.
If user enters value for only field F1 and keeps F2 value blank, then we want to display report output from query views in web template T2.
The problem we are facing is to decide the appropriate place where this type of condition could be coded. We do not think user exit would do the job here.
Please help if you can.
Regards
XX

Hi Pravin,
Thanks for the reply.
Let me please clarify my problem further.
Web Template T1 --> Query Views V1, V2, V3.
(All query views V1, V2, V3 have variables on fields F1 and F2).
Web Template T2 --> Same Query Views V1, V2, V3.
(All query views V1, V2, V3 have variables on fields F1 and F2 but this time variables would be having different values than above).
If user enters values for both fields F1 and F2, then we want to display Template T1 with F1 variable = "value by user" and F2 variable = "value by user".
If user enters value for only field F1, then we want to display Template T2 with F1 variable = "value by user" and F2 variable = "all values for which transaction data exist".
Thus, we want to display a unique web template based on whether the value of F2 is entered by user or not.
Please let me know if you need any further clarification.
Thanks

Transaction based on query

Hello,
I've created a query in Customizing environment via SQVI, and then created the program "AQA0SYSTQV000012PEDIDOS=======". After that, went to SE93 and also created the transaction based on this program, which generated a request. When I transported this request to DEV 300, the transaction worked perfectly, but when transported to QAS did not work. Maybe the request was carrying only the transaction and not the program...?
Any ideas are welcome.
Regards,
Adriano Cardoso

Again create SQVI in Test(QAS). I think it asked you the TR for creating the new t-code using SE93 and NOT FOR SQVI. So create a new query (SQVI) and create the t-code... it will work.
Reward if helpful..
Regards,
Srib
Edited by: SriB K on Jun 13, 2008 9:24 PM

Authorisation on IP based on query

Similar Messages

Maybe you are looking for