Authorization issue - Query is not working
Hi All,
I have creared an auth.object on zcomp_code. created a role and assigned to a particular user. I have included 20 comp.codes in this auth object. All is well except the query result
I have 2 variables in the variable pop-up screen. 1 is FiscYear and 2nd is zcomp_code (auth.variable). If i execute by not giving any value to comp.code, its showing "no autho". If I pass values then its giving proper result. Per my understanding, without input to comp.code it should display what and all are authorised to that particular role/user. Please correct me if I am wrong. I would like to show the result even there is no input to comp.code. Could anyone please suggest any approach to do this. Your assistance highly appreciable.
Note: the comp.code variable is of type auth. variable. optional, ready for input.
Thank you in advance!!!
Best Regards
Venkat....
Hi Venkatesh,
Hope you did all necessary developments, however i guess there is something missing in assignment of authorization relevant obj. Please go through below link which has explained on possible errors for "No Authorization Error" during this type of development.
http://wiki.scn.sap.com/wiki/display/BI/Characteristic+Value+Authorization++BI+7.0
Hope this helps.
Regards,
Venu Gopal
Similar Messages
-
Bex Query is not working in portal
Dear Experts,
i have uploaded BI master role into portal, By default Bex Queries are assgined to Master Role. when I clcik on preview for particular Bex Query, it's working fine. but after assigning the master role to end user, that same Bex Query is not working. it's showing Below error..
Portal runtime error.
An exception occurred while processing your request. Send the exception ID to your portal administrator.
Exception ID: 05:22_18/08/10_0002_7116150
Refer to the log file for details about this exception.
please give me suggetions...
Regards,
VENUHi Venu ,
Can you please check the logs for details - http(s):<host>:<port>/nwa . This may be a permissions issue . Check if the iview has read permission for everyone group and then test . Also post the error details here .
Regards
Mayank -
Excel 2010 MS Query is not working
Hi, I am in the process of upgrading all my Excel 2003 spreadsheets to Excel 2010. I am running into problem with the MS Query. Spreadsheets have MS Query linking to MS database. However, when I open some of the spreadsheets, the MS Query
is not working ie. the blue circle keeps turning and then not responding. It is very weird that this MS Query is working fine with some spreadsheets but not couple and they are all linking to the same database except a small different in criteria. I
tried to re-create the Query in the spreadsheet in Excel 2010 by going to Data>From Other Sources>From Microsoft Query and select the database. Once I set up the criteria and click Return data, the Query gets stuck.
Please help! Any comments/suggestions will be appreciated.
ThanksHi,
There are many possible causes that can crash MSQuery in Excel 2010.
First, please make sure we have installed the latest Office 2010 and Windows patches.
Second, Please read the Blog, it explains one typical crash scenario.
=====
AppName: msqry32.exe AppVer: 14.0.4750.1000 ModName: msvcr90.dll
There are several possible resolution you can try to resolve the above crash:
1. When you launch MS Query, just disable the option "Validate queries before saving or returning data", this is the fifth box in the options menu.
The only problem is that if you have made any mistake in your query, you'll only be noticed when receiving the data in excel.
2. Repair all the keys into registry at the following place:
[HKEY_CURRENT_USER\Software\ODBC\ODBC.INI\ODBC]
For example:
Windows Registry Editor Version 5.00
[HKEY_CURRENT_USER\Software\ODBC\ODBC.INI\ODBC]
"TraceFile"="C:\\DOCUME~1\\...USERNAME...\\IMPOST~1\\Temp\\SQL.LOG"
"TraceDll"="C:\\WINDOWS\\system32\\odbctrac.dll"
http://blogs.technet.com/b/asiasupp/archive/2011/11/07/msquery-randomly-crashed.aspx
=====
Third, start the Excel 2010 with
safe mode, it helps us confirm if some add-ins cause this issue.
Hope it's helpful.
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in
Office programs. -
Temporary Table In SAP Query - Does not Work?
DECLARE @date DATE
DECLARE @delrows INT
DECLARE @delquan INT
DECLARE @a INT
DECLARE @recrows INT
DECLARE @recquan INT
SET @a=0
IF OBJECT_ID('tempdb..##tab) IS NOT NULL DROP TABLE ##tab
CREATE TABLE ##tab
[Date] date,
[Delivery Rows] varchar(40),
[Delivery Total Units] varchar(40),
[Receipts Rows] varchar(40),
[Receipts Total Units] varchar(40),
WHILE @a!=7
BEGIN
SET @date=DATEADD(day,-@a, getdate())
SELECT @delrows=ISNULL(COUNT(DLN1.[LineNum]),0), @delquan=ISNULL(SUM(DLN1.[Quantity]),0)
FROM ODLN
INNER JOIN DLN1 ON ODLN.[DocEntry]=DLN1.[DocEntry]
WHERE ODLN.[CreateDate] = @date
SELECT @recrows=ISNULL(COUNT(PCH1.[LineNum]),0) , @recquan=ISNULL(SUM(PCH1.[Quantity]),0)
FROM OPCH
INNER JOIN PCH1 ON OPCH.[DocEntry]=PCH1.[DocEntry]
WHERE OPCH.[DocDate]=@date
SET @a=@a+1
INSERT INTO ##tab VALUES(@date,@delrows,@delquan,@recrows,@recquan)
END
SELECT * FROM ##tab
{/code}
Can anyone explain why this query does not work in SAP? It works fine on SQL but gives me this message in SAP:
1). [Microsoft][SQL Server Native Client 10.0][SQL Server]Incorrect syntax near ')'.
2). [Microsoft][SQL Server Native Client 10.0][SQL Server]Statement 'Service Contracts' (OCTR) (s) could not be prepared.
Edited by: Chris Candido on Feb 2, 2011 8:38 PMChris,
There are several areas in your code which needed changes.
1. On the field name for your temp table you had spaces.
2. The SAP table name ODLN, OPCH, PCH1 had to be fully referenced like
[dbo].[ODLN]
3. You really need not have ## in front of your temp table, it could just be #
The select at the end is actually what causes the most problem as for some reason from within SAP it does not produce the result. I would suggest you put the whole code into a Stored Procedure and call the SP from SAP. Corrected SQL below. If you remove the Select line at the end the query would work with in SAP, but keep it give give you an error. SP is the best option for this.
DECLARE @date DATE
DECLARE @delrows INT
DECLARE @delquan INT
DECLARE @a INT
DECLARE @recrows INT
DECLARE @recquan INT
SET @a=0
IF object_id('tempdb..#tab') IS NOT NULL
BEGIN
DROP TABLE #tab
END
CREATE TABLE #tab
[Date] date,
DeliveryRows varchar(40),
DeliveryTotalUnits varchar(40),
ReceiptsRows varchar(40),
ReceiptsTotalUnits varchar(40),
WHILE @a!=7
BEGIN
SET @date=DATEADD(day,-@a, getdate())
SELECT @delrows=ISNULL(COUNT(DLN1.LineNum),0), @delquan=ISNULL(SUM(DLN1.Quantity),0)
FROM [dbo].[ODLN]
INNER JOIN DLN1 ON [dbo].[ODLN].DocEntry=DLN1.DocEntry
WHERE [dbo].[ODLN].CreateDate = @date
SELECT @recrows=ISNULL(COUNT([dbo].[PCH1].LineNum),0) , @recquan=ISNULL(SUM([dbo].[PCH1].Quantity),0)
FROM [dbo].[OPCH]
INNER JOIN [dbo].[PCH1] ON [dbo].[OPCH].DocEntry=[dbo].[PCH1].DocEntry
WHERE [dbo].[OPCH].DocDate=@date
SET @a=@a+1
INSERT INTO #tab VALUES(@date,@delrows,@delquan,@recrows,@recquan)
END
SELECT * FROM #tab
Suda Sampath -
Query is not working correctly
Hi all,
Below query is not working correctly. Please let me know, if you find the mistake
select
a.name,
b.VOD_NAME,
count(xm.ATTRIB_03)
from
siebel.s_vod b
left outer join ISS_OBJ_DEF c on b.OBJECT_NUM=c.PAR_VOD_ID
left outer join vod d on c.VOD_ID=d.row_id
left outer join PROD_INT a on d.OBJECT_NUM=a.CFG_MODEL_ID
left outer join PROD_INT_XM xm on a.row_id=xm.PAR_ROW_ID
where
b.VOD_TYPE_CD='CLASS_DEF'
and
c.LAST_VERS = 0
and
b.vod_name='Componentes'
group by a.name,b.vod_name having count(xm.ATTRIB_03) >=5user9522927 wrote:
Hi all,
Below query is not working correctly. Please let me know, if you find the mistake
select
a.name,
b.VOD_NAME,
count(xm.ATTRIB_03)
from
siebel.s_vod b
left outer join ISS_OBJ_DEF c on b.OBJECT_NUM=c.PAR_VOD_ID
left outer join vod d on c.VOD_ID=d.row_id
left outer join PROD_INT a on d.OBJECT_NUM=a.CFG_MODEL_ID
left outer join PROD_INT_XM xm on a.row_id=xm.PAR_ROW_ID
where
b.VOD_TYPE_CD='CLASS_DEF'
and
c.LAST_VERS = 0
and
b.vod_name='Componentes'
group by a.name,b.vod_name having count(xm.ATTRIB_03) >=5I couldn't see through the internet what happend when you ran said query. How about helping us out by showing us the evidence that it "is not working correctly".
"Here's a picture of my car sitting in the driveway. Why won't it start?" -
Select query is not working in BDC Program
Hi,
I am working in BDC for update valuation class for T-code mm01.Actually In this BDC i am using two recoding based on material type.
i am using two internal table : I_DATA and ITAB
Use I_DATA to hold excle data in which material No, plant , valuation type , valuation No. and ITAB for material No, material type Only.
So, i am fetching material Type ( MARA-MTART ) through select query. But Select query is not working. and also i did check MARA table according that Material Number then material no. exit in Mara Table.
Note : at run time I_DATA have 1 row but ITAB have 0 row ....
DATA: BEGIN OF I_DATA OCCURS 0,
MATNR TYPE MARA-MATNR,
WERKS TYPE MARC-WERKS,
BWTAR TYPE RMMG1-BWTAR,
VERPR TYPE BMMH1-VERPR,
BKLAS TYPE MBEW-BKLAS,
STATUS TYPE C,
END OF I_DATA.
DATA : BEGIN OF ITAB OCCURS 0,
MATNR LIKE MARA-MATNR,
MTART LIKE MARA-MTART,
END OF ITAB.
Loop at I_DATA.
select matnr mtart from mara into table itab where matnr = I_DATA-matnr.
endloop.
Guide me..........If you use your
Loop at I_DATA.
select matnr mtart from mara into table itab
where matnr = I_DATA-matnr.
endloop.
At end of loop, itab will only contain the result of the last select, so use a
Loop at I_DATA.
select matnr mtart from mara APPENDING table itab
where matnr = I_DATA-matnr.
endloop.
better
if I_DATA[] is not initial.
select matnr mtart from mara into table itab
FOR ALL ENTRIES IN i_data where matnr = i_data-matnr.
endif.
Some Remarks
- If actually required (where does I_DATA come from, is it an external format, you need the internal value to use in SELECT statement), check via SE11 the correct [conversion exit|http://help.sap.com/saphelp_nw04/helpdata/en/35/26b217afab52b9e10000009b38f974/content.htm] associated with domain MATNR (Is it truly ALPHA, and not something like MATN1, so [CONVERSION_EXIT_MATN1_INPUT|http://www.sdn.sap.com/irj/scn/advancedsearch?query=conversion_exit_matn1_input])
- You could try to use BAPI like [BAPI_MATERIAL_SAVEDATA|http://www.sdn.sap.com/irj/scn/advancedsearch?query=bapi_material_savedata] and not BDC
Regards,
Raymond -
Why select query is not working?
CREATE OR REPLACE TYPE prod_type AS OBJECT (
pid INT,
pprice NUMBER,
MEMBER PROCEDURE display(pid IN NUMBER));
create table prod of prod_type (pid primary key);
CREATE OR REPLACE TYPE deal_type UNDER prod_type (
ctr NUMBER,
OVERRIDING MEMBER PROCEDURE display (pid IN NUMBER),
insert into prod values(deal_type(101, 4, 1));
insert into prod values(deal_type(102, 5, 0));
------below given select query is NOT WORKING ---------
select ctr from prod p where p.pid=101;
Thanks,
-Nid------below given select query is NOT WORKINGWondering how you inserted data ...
SQL> CREATE OR REPLACE TYPE prod_type AS OBJECT (
2 pid INT,
3 pprice NUMBER,
4 MEMBER PROCEDURE display(pid IN NUMBER));
5 /
Type created.
SQL>
SQL> create table prod of prod_type (pid primary key);
Table created.
SQL>
SQL> CREATE OR REPLACE TYPE deal_type UNDER prod_type (
2 ctr NUMBER,
3 OVERRIDING MEMBER PROCEDURE display (pid IN NUMBER),
4 );
5 /
Warning: Type created with compilation errors.
SQL> sho err
Errors for TYPE DEAL_TYPE:
LINE/COL ERROR
4/1 PLS-00103: Encountered the symbol ")" when expecting one of the
following:
, not pragma <an identifier>
<a double-quoted delimited-identifier> final instantiable
current order overriding static member constructor map
SQL> CREATE OR REPLACE TYPE deal_type UNDER prod_type (
2 ctr NUMBER,
3 OVERRIDING MEMBER PROCEDURE display (pid IN NUMBER));
4 /
Warning: Type created with compilation errors.
SQL> sho err
Errors for TYPE DEAL_TYPE:
LINE/COL ERROR
1/1 PLS-00590: attempting to create a subtype UNDER a FINAL type
SQL>You made an attempt to create a subtype UNDER a FINAL type - that the reason why can not work ...
Avoid deriving a subtype from this FINAL type.
HTH -
Edge Animate - Issues - buttons/symbols not working/disappearing when in portrait mode on iPad and mobile devices, but in landscape version everything is fine.
Everything works cross broswer on Desktop - Safari, Chrome, Explorer and Firefox - mobile devices prove glichy... anyone else experience this?
It's a regular issue of mine, particularly with complex animations. Symbols disappear
- is it something to do with overflow?
- responsive scaling?
I have no idea.Since no one has answer this post, I recommend opening a support case with CSS as they can work with you to solve this problem.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ -
After upgrade 11.1.1.5 to 11.1.1.6, the Web Query (.iqy) does not work. After open the .iqy file in Excel, entered the user and password, it only pulls in "PK" in one cell, instead of the expected analysis report. This was working in 11.1.1.5 before upgrade.
Does anyone know how to correct this issue? Is this a bug in 11.1.1.6, or required some new configuration settings?
Thanks in advance.
DXA bug has been registered.
Bug 14040587 - OBIEE 11.1.1.6: OPENING WEB QUERY (.IQY) FILE IN EXCEL SHOWS JUNK CHARACTERS. -
New install of CFB 2 on Win 7 32bit with CF901.
When right clicking on a database table in RDS Dataview I get an error , I get the error "/MyProject/.rdsTempFiles/RDS Query Viewer does not exist". The same is happening when trying to open the RDS Query Viewer.
This works correctly in CFB 1.
Any suggestions what is going on? Is it a permissions issue or something similar? The .rdsTempFiles directory is created in the /MyProject folder and shows up in the Navigator.
Thanks
DougHi Kiran,
I cannot login to the Forums (the login is apparently down) so will answer what I have found.
Running CFB2 on Win 7 32bit. CFB 1 is also installed.
Tried the following: ( CFB 2 ALWAYS started with -clean option )
1. started with no projects at all in Nav. View.
Added New Project called "test List" that was pointed to "C:\inetpub\wwwroot\testlist" folder - Query Viewer did not work
2. deleted project from Nav View, deleted .project, .settings., settings.xml, .rdsTempFiles from testlist folder.
Added New Project called "test List2" that points to same testlist folder. Query Viewer did not work.
Renamed "test List2" to "testlist". Query Viewer did not work.
3. Deleted project from Nav View, deleted .project, .settings, settings.xml, .rdsTempFIles from testlist folder.
Restartd CFB2. Added New project called "testlist" that points to same testlist folder. QUERY Viewer worked successfully.)))
Renamed testlist project to "Test List". Query Viewer worked.
Restarted CFB2 and repeated 1 and 2. Even re-started CFB2 after adding a new project before trying Query Viewer. Did not work.
Uninstalled CFB2. Reinstalled CFB2. Same results as 1,2,3.
Other interesting info.
In the Error Log when I start CFB2, I always get the following.
Unable to create a template transfer. Com.adobe.rds.core
Three more entries with No message except "No stack trace" - com.adobe.ide.coldfusion.server
This happens even after my reinstall.
Hope this helps.
Doug Smith
[email protected] -
Characteristic "Master Data" setting in Query definition not working?
Hi,
I am having a problem with a query definition. (BI 7.0)
The query comprises the following definition which relate to displaying Milestone dates for respective projects in a time series so the dates are populated in the correct column in a time series:
Filter
Project Definition = Fixed Single Project Definition
Fiscal Year Variant = K4
Project Profit Centre = Hierarchy Node
Project Plant = Fixed Single Value
Free Chars
Network
Network Activity
Activity Element
Rows
Project Plant
Project Profit Centre (With hierarchy)
Project Definition
Milestone Type (Setting in characteristic to pick up Master Data)
CSR Relevant (Setting in characteristic to pick up Master Data)
Structure
Actual
Scheduled
(Actual: Value type = Actual, Origin = Manual ,Event = Start)
(Scheduled: Value type = Actual, Origin = Scheduled ,Event = Start)
Columns
Key Figure structure of 12 key figures in a time series
Selection
Key Figure = Date
Fiscal Year/Period = Current Fiscal Year / Period (SAP EXIT) (With Offset 1 to 12)
FYI
When I run the above it comes back correctly. However when I add "MILESTONE" (Characteristic setting (Posted Values) to the Query Definition immediately after the "Milestone Type" and before CSR it does not work it just is hanging for a considerable time.
I am not using "Master Data" for the "Access Type for Result Vales" for the additional characteristic "MILESTONE" just "Posted Values".
I was expecting that it would just show all Milestone types as per Master Data but just the Milestones that are posted for this result.
I would appreciate a solution to this issue and an explanation to why it hangs when I add the "MILESTONE" characteristic to the definition as explained above.
Thanks in advance..
StevoHello there,
Putting Milestone in the rows in the query definition is not being hang there (i.e., while creating and saving the query) right?
It is stucked while executing the query isn't it so?
That's because you have too many records to be desaggregated by milestone characteristic, and this is indepently of posted values in the characteristic settings.
Putting milestone characteristic in the free characteristics will allow you to run the query, but desaggregate it (add it to the rows) will be to much information to read from your dataprovider (this is just a guess).
If it is being stucked in query execution whike milestone is in the rows. Try this for example:
Add milestone to the free chars. Execute the query. Filter milestone characteristic while still in the free rows and choose a value that you are pretty sure has the smallest records in the Dataprovider (could be for example value #). Than drill down milestone to the rows. You'll see that it can be executed without any problem.
Diogo. -
Query Excetion not working for Charactristic restriction
Hi ,
I am trying to create one Exception in Query Designer.
The requirement is : Report should highlight the data cells where Material Group is "AAAA".
Now I created one exception and rectricted to Material Group " AAAA".
Now the issue is : It is working in Analyser But not in portal.
It is working in ABAP web( RSRT Transaction) but not in JAVA web.
I created a new exception only rectriction related to data cells( for example: Gross profit > 100) ..It is working ...
I dont know why my system is not working for exceptions restricted to Characteristic.
There may be some setting , I am missing which is leading to this issue. As the exception is working in Analyser, I donot think there is any issue with Exception definition...
So please guide me ..... if you have already faced this type of issue and resolved the same...
ThanksHi ,
I am trying to create one Exception in Query Designer.
The requirement is : Report should highlight the data cells where Material Group is "AAAA".
Now I created one exception and rectricted to Material Group " AAAA".
Now the issue is : It is working in Analyser But not in portal.
It is working in ABAP web( RSRT Transaction) but not in JAVA web.
I created a new exception only rectriction related to data cells( for example: Gross profit > 100) ..It is working ...
I dont know why my system is not working for exceptions restricted to Characteristic.
There may be some setting , I am missing which is leading to this issue. As the exception is working in Analyser, I donot think there is any issue with Exception definition...
So please guide me ..... if you have already faced this type of issue and resolved the same...
Thanks -
F11 (query mode) not working in payment form in AP
Dear All,
F11 function not working in Payment form in R12.
I made a payment and quit the form. Whem am trying to query the payment invoice to void it. F11 functionality is not working.
Could anyone tell me the solution?
Regards
Deeps.Hi Ivruksha,
Thanks for your response.
This issue is due to personalization done in payment form to default the payment date. First we defaulted the payment date once we open the form and faced issue in Quering a payment.
Now we did a change in personalization to default after selecting the Trading Partner and rectified the issue.
Regards,
Deeps. -
4.3 Update - Car Stereo Issue, voice dialing not working with Bluetooth
I've seen some similar issues reported, but they were for specific cars/stereos, and the symptoms were different, so I'm posting about mine:
Phone: Samsung Galaxy SIII, Android 4.3.
Car Stereo: Pioneer AVH-X2500BT
This is a stereo I bought and installed myself. All of its features worked fine, and I was enjoying making calls using voice dialing via the stereo. Then, I installed the 4.3 update to the Galaxy SIII. Ever since (literally, I made a call that day before installing it, and tried shortly after), I cannot use the voice dialing feature. Any attempt to use voice dialing or voice commands via the car stereo will fail. Here's what happens:
I do a long press on the car stereo's Home button to initiate voice dialing. On my phone, S-Voice starts up, and a Toast (little message) pops up briefly that says "Check in-car audio". When I talk, the little animation on the microphone button in S-Voice does not happen, meaning it's not hearing anything. The car stereo shortly cancels out of voice dialing mode, as though it timed out, or something.
I've tried switching to Google voice, but the same thing happens. I've tried all kinds of configuration on both devices. I've unpaired and re-paired. Nothing.
Also, turn-by turn directions from Google Maps appears to not work. The app thinks it's giving them, and when I turn the car off, the voice suddenly works from the phone, but it just won't come out the stereo.
All other features work fine, including Pandora, and streaming Bluetooth audio. I can even make phone calls, by accessing the contacts and recent call list from the car stereo. The calls work and come through the stereo fine. Literally voice dialing and Google Maps are all that doesn't work.
Does anyone know how to fix this?There could be any number of factors that may be affecting this, byounie. It may be that the firmware on your car stereo headunit may need to be updated. My direct recommendation to check first would be to access your bluetooth submenu, and next to paired info for the Pioneer AVH-X2500BT, you should see a little cog wheel/settings icon. Please select this, and start unselecting everything available there. Work your way up, and enable and test these different settings one by one, to see if there is a conflict between Google Maps and Voice dialing services. Let us know what happens, byounie.
NicandroN_VZW
Follow us on twitter @VZWSupport -
Using parameters in a select query sometimes not working
I use parameters throughout my code - usually without problem, but for some reason in one case it does not return a result. When I modify the querystring to contain the value instead of using parameters it works. Is it because I'm secting a clob? or is it because I'm using a 9i ODP.net dll against a 10g database? this is c# 2.0
here's the source code that does not work for me - REQUEST_DATA is a clob:
public String loadRequest(String PSRNumber)
String returnVal = null;
ConnectionStringSettings connectionInfo = System.Configuration.ConfigurationManager.ConnectionStrings["Scribe"];
OracleConnection myConnection = new OracleConnection();
String strSQL = "select PSR, REQUEST_DATA from stats.request where PSR = :PSR";
try
myConnection.ConnectionString = connectionInfo.ConnectionString;
OracleCommand cmd = new OracleCommand(strSQL, myConnection);
cmd.CommandType = CommandType.Text;
cmd.Parameters.Add("PSR", OracleDbType.Varchar2).Value = PSRNumber;
myConnection.Open();
OracleDataReader dr = cmd.ExecuteReader();
if (dr.Read())
returnVal = dr.GetOracleString(dr.GetOrdinal("REQUEST_DATA")).ToString();
else
returnVal = null;
dr.Dispose();
cmd.Dispose();
catch (OracleException ex)
printError(ex.Message);
finally
myConnection.Close();
myConnection.Dispose();
return returnVal;
}when I replace the line generating the sql, and remove the lines pertaining to parameters it works:
String strSQL = String.Format("select PSR, REQUEST_DATA from stats.request where PSR = {0}", PSRNumber);
I'm fine just using this as a workaround, but I need an explanation why the other does not work - I prefer to use parameters.
Message was edited by:
user633546I figured it out. thank you for your help in pointing me in the right direction.
the problem was there was a trailing space in the data.
when the data for that table is numeric for every record, the query allows me to leave out the single quotes. Trailing spaces do not seem to cause the database to see it as non-numeric - leaving out the quote still finds the record even if there is a trailing space.
but when I put in the quote, it is not an exact string match, so it could not find the record. sometimes this flexibility gets me into trouble :\
Maybe you are looking for
-
Error while trying to save page edits, please help!
Hi, I am using SharePoint online 365 and when I try to make an edit to a page, I am getting this error message after hitting the save button. I had previously attempted at deleting the two lines of text in the HTML that would allow breadcrumbs to app
-
File Synch problem with timestamp
Win2k, LabVIEW 7.0 I'm trying to do file synchronization between the data files I produced on the local disk, and a remote server. I am doing a LIST FILES on the local folder, and a LIST FILES on the remote folder. For each file, I do a GET FILE INFO
-
Why lose internet speed when laptop is closed
My connection to the internet goes from 10mg to less than 1mg when I attach an HP screen to my MacBook Pro...when I shut the laptop?
-
"Selected report cannot be loaded" when running published crystal analysis
Hi, When running published crystal analysis reports (*.car) within Crystal Enterprise 10 i receive the message below. This is happening to all published crystal analysis reports. Can open the reports fine within Crystal Analysis Professional itself.
-
Compaq Presario v6000 recovery without disks
My last recovery disc cannot be read by my laptop. It seems that the 6000v recovery disc are no longer available. When I push f11 during start up it gives me no options, just prompts me to insert the disk that it cannot read. Any alternatives?