Authorizing won't work!

I bought a Neko Case song a while back on iTunes on my iPhone, playing it there worked fine at first, when I got home to my desktop the song had appeared in my iTunes library and when I clicked it to play, it asked for authorization. I submitted my information and it confirmed that I was authorized... but then wouldn't play the song, and when I clicked again, it asked AGAIN for the authorization. This happened again and again. I tried reauthorizing and re-authorizing (successfully) ALL my devices, and it still won't work. It won't play anymore on the iPhone I bought it from either. It seems like some kind of glitch, which is frustrating because I own the song and want to listen to it, but can't. All my information on my account is up to date, it confirms I'm authorized every time only to just ask again! Frustrating. Any help would be appreciated. Re-starting my computer and iTunes makes no difference.
Thanks!

Delete and redownload it if doing so is free in your country.
(116074)

Similar Messages

RoboHelp for Word installed from RoboHelp 10 won't work with Word 2010

I have a Help project created in RoboHelp for Word 8. I recently upgraded from Word 2007 to Word 2010 and discovered that RH8 for Word won't work with Word 2010. So I purchased RoboHelp 10 and have installed RoboHelp for Word from it. Alas, RH for Word STILL won't work with Word 2010. When I try to open my project, I get this message:
Before I bought RH10, I live-chatted with an Adobe sales person who assured me it was compatible with Word 2010.
BTW, I tried to roll back to Word 2007, but I was getting weird behavior running Word, so I have reinstalled Word 2010 and want to stay there.
Any ideas?

I have just installed Rh10 for Word on a new machine and initially I got this message.
I wonder if you have followed those instuctions? I changed the setting to Enable All.
The other possibility is what do you have set for the default version? If it is 2007 and that no longer exists on your machine, then Rh will not be able to proceed. The dropdown should show 2010
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

My external speakers won't work

my external audio speakers won't work for any apps or videos on my iPad 4th gen (wifi, OS 6.01) It does work for music howevever. I have tried the reset with holding down the home button and power button simultaneously and that worked once. It won't work a second time. How do I fix this proble permanently?
Janice

Please identify your notebook/pc .
Look at the base/rear/side of the notebook/pc at the barcoded sticker.
Post item numbered 2 on the following example of an HP notebook's barcoded sticker. Your barcode may be slightly different but will still have the important imformation needed for us to help you.
###Do not post the serial number as it is personal information.###
Post the installed operating system version ( and whether it is 32 or 64-bit ) and whether the CPU is an AMD or Intel product
Not posting all of the information as requested will delay our responses and slow troubleshooting of the issue that led you to author a thread.
Is your notebook/PC still within its warranty period?
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

IPod, iTunes won't work with each other

I have spent the last 2 days trying to update my "new" nano. The first few times I synced it up no problem. Now that I've spent a small fortune on new music, the nano and iTunes won't work together at all.
First, I have the most up-to-date version of iTunes. Next, I had the software update 1.1.3 for the nano all ready to go when I plugged it in. I hit the install new software button and dear god, if the nano didn't crap out and iTunes lost it and gave me a 1436 error. I had to disconnect the nano and reconnect. I tried several times, but finally gave up on updating the software.
I went on to try to sync the nano and iTunes so I could at least listen to my music at work, but iTunes now says I'm not authorized to play ANY of my purchased music (recently purchased or stuff I've had on there for years) on my computer so it won't copy it onto my nano. So I deauthorize and reauthorize my computer several times, I've read every possible troubleshooting/solution guide I can find on the site and NOTHING works. I can play all my purchased music in iTunes once I've reauthorized my computer, but as soon as I plug my nano in - forget about it - "You are not authorized to play this music on this computer" crap. And I can't even restore the nano b/c I get that stupid 1436 error - and believe me I tried everything those help pages suggest.
I'm at a loss here and not in the least bit happy with this thing.

Problem solved. The harddisk was formatted and Windows and iTunes re-installed. Hopefully this problem won't appear very soon.

Test movie won't work anymore!!

When I test movie on all my .fla files, the script "seems"
not to work (many things missing, problems with my arrays...) BUT
if I run the SWF produced...it works like a charm??!!
What should it be please?
I've re-install everything on a new system without any
success
If I use the debugger it stalls immediately...
...but remeber the SWF is perfect, it's only while previewing
(testing movie ) inside of flash
Thnaks very much!

Jayme65 wrote:
> When I test movie on all my .fla files, the script
"seems" not to work (many
> things missing, problems with my arrays...) BUT if I run
the SWF produced...it
> works like a charm??!!
>
> What should it be please?
> I've re-install everything on a new system without any
success
>
> Thnaks very much!
The internal player and browser player are two totally
separate applications.
The one in browser get updated frequently while your
authoring player won't.
Often the case when macromedia/adobe left unfixed bugs in the
user IDE
fixing them later with the browser players. This would do the
very thing you
describe. SOme stuff works or won't work while authoring but
will or will not
in browser.
Perhaps that's the case in here.
Best Regards
Urami
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

Dvd won't work

DVD player won't work with Mavericks...plays fine on home dvd player and on 3 other Macs...but my main iMac, now loaded with Mavericks, won't play dvd video. Automatically ejects disc. I did permission repair, reset SMC, and still won't work. Anyone having these problems...come up with a fix yet

Hello Ralph,
Thank you for providing the details of the issue you are experiencing with the optical drive on your iMac. I recommend the steps below when discs are automatically ejected:
The drive accepts discs but they do not mount or are automatically ejected
Make sure the drive is not upside down. The aluminum enclosure should be facing up.
Check the disc's surface for scratches and dirt, since these things can prevent the disc from appearing on the desktop.
The MacBook Air SuperDrive is designed to be used with MacBook Air and Mac mini computers that do not have a built-in optical drive. For best results, connect the MacBook Air SuperDrive directly to the computer's USB port instead a USB hub.
Reset the System Management Controller (SMC).
Ensure your drive can read the specific type of disc being used. The System Profiler or System Information may provide additional information regarding what media your computer supports.
Mac OS X 10.6 Snow Leopard or earlier: Open Apple System Profiler by choosing "About this Mac" from the Apple () menu. Then, click More Info.
OS X 10.7 Lion or later: Open System Information by choosing "About this Mac" from the Apple () menu. Then, click System Report.
If the disc continues to not be recognized, contact Apple, an Apple Authorized Service Provider, or make an appointment with an Apple Retail Store for additional troubleshooting, evaluation, or service.
You can find the full article here:
Apple Computers: Troubleshooting the slot-loading SuperDrive
http://support.apple.com/kb/HT2801
Thank you for using Apple Support Communities.
Best,
Sheila M.

Conflicting countries, Redemption code won't work. Very sad art student.

I tried downloading my Student membership of Adobe Creative Cloud while I was studying in France last month (I am a U.S. citizen.) When I tried entering my redemption code, there was an error message that says this:
This card was purchased in a country that does not match your Adobe ID. You can try signing in with a different Adobe ID or get in touch with us if you need help.
So I stopped trying, and assumed it would work once I got back to America. But the same thing is happening! Which makes sense, but it's not like I can go and change my Adobe ID to say that I live in France.... And I can't just magically change the country that I purchased it in... So it won't work at all. Is there some way I can change my Adobe ID to make this work?
Thank You!!!!

Hi Beverly!
Yes, I "purchased" it over there (I got it free from my school, but I went through the process of what a normal purchase would be while in France.) I do have another email account, but because I'm getting it through my school, it only works with my school email address. I could try to make another Adobe ID with the same email (if that's even possible) and put that I am currently in France, but I am afraid that I wouldn't be authorized to use it in the U.S.
Thank you so much for your help!! I hope there is a way to fix this!!
~Rachel

Encore and Encoder won't work.

Hello: My frustrations just keep mounting. My system is a windows platform, XP pro until windows 7 is released, so running at 32, core 2 quad.
I tried to launch Encore today and it kicked me out with an error. I tried to launch it independently of premeire and same thing. So I did a reinstall of Encore, Bridge and Encoder. Still same problem. Encoder won't work. It tried Media Encoder and it worked for one mpg and then on the second one (13 minute video) it choked up. After that both won't work. How am I suppose to export and author?
Does any one have any solutions? My project is huge. Could file size be an issue, if so, any management tips?
Thanks, Christine

You should post this in the Encore forum.

After installing Maverick my computer, when restarted, only a gray screen appeared. My computer won't work at all...what happened?

After installing Maverick my computer shut down and when it restarted I couldn't get to the home screen. The monitor was grey with some dark grey shapes, it sounded like it was constantly running a program. My computer is sick!! HELP

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use either of the techniques in Steps 1b and 1c to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 10. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 10
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 11
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 12
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

HP LaserJet Pro C1415fn color MFP - fax won't work

I have a LaserJet Pro CM1415fn color MFP on a Windows 7 64-bit laptop. I've been using the printer for two years now.
At the moment the fax function only works if I use it manually (i.e. if I place a sheet of paper on the scanner, select the "Fax" button on the printer touch pad and dial the number). However, if I want to send a fax via the PC interface, it won't work.
For example, if I open a PDF, click on "Print" and select "HP LaserJet Professional CM 1410 Series Fax", nothing happens -- no window/interface will open. If I select "HP Send Fax" or "HP Fax Setup Wizard" from the program menu, nothing happens.
I've always been sending faxes this way and I just don't know what happened... Can anyone please help?
Thanks in advance!
Claudia

Hi @Clabee ,
I see that you can't fax from the PC anymore. I can help you with this.
If this just recently happened, I would do a System Restore back to when everything was working properly.
System Restore for Windows 7.
If you would prefer not to do the System Restore, uninstall and reinstall the printer software. It might become corrupted.
Here are the steps to run the uninstall from the computer or the CD.
To uninstall from program files:
Touch the Windows key and the E key to access the computer window.
Select the C drive.
Select program files or program files x86.
Open the HP and printer name folder.
Select uninstall.
Uninstall the software from the CD:
Touch the Windows key and the E key to access the computer window. Right click on the CD for the printer, left click open in a new window, double click on uninstall.
Disable all the start up programs and temporarily turn off the Antivirus Software. How to use MSCONFIG .
Click on the start up tab and click disable all.
Download, save and install the latest drivers.
HP LaserJet Pro CM1415fnw Color Multifunction Printer Drivers.
Test the printer and try sending a fax again from the PC.
Then you will need to go back in and enable the start up programs and turn the Antivirus Software back on again.
If you need further assistance, just let me know.
Have a wonderful day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

I've just updated my iPhone to the new iPhone OS and now it won't work and iTunes won't recognise that it's there. I've uninstalled iTunes and reinstalled twice and it's not working. Please help.

I've just updated my iPhone to the new iPhone OS and now it won't work and iTunes won't recognise that it's there. I've uninstalled iTunes and reinstalled twice and it's not working. Please help.

I have not had wifi since November when I upgraded to the newest IOS version. I called the Apple help line and they told me some things to do and I tried them all and they worked for a few hours and then wifi shut off again. I kept doing what they told me and it worked for a couple more days and then I could never turn it on again. My blue tooth doesn't work either. I had to actually increase my data usage with AT&T becuase of this. When I did that in December I went to the Apple store and was told that it is a hardware issue and since my phone is out of warranty I would have to pay for a new phone because they could not fix the issue. My upgrade isn't up until June 2014 so not only do I have to wait for the upgrade and I am not paying for a new phone but I have to pay $10 plus extra a month on my cell phone bill because I was going over on my Data!!! I have been beyond upset about this and Apple is not doing anything about this nor did they offer up some way to resolve the issue because obviously it is not just some rare incident if several people are having this issue. Who knows how many people out there have had this issue and have not said anything about it. Now there is a newer update that I can't do because it requires wifi in order to download.
June can not get here fast enough and I may not go back to Iphone after dealing with this for so long with no help from Apple.

IPhoto and Apple ID won't work after system update

I've recently updated my MacBook Air to OS X v10.9.4. iPhoto won't work as i am currently using v9.2. I've tried downloading a later version but have been advised that my Apple ID will not work on this computer. NB. I have an iPhone but have not used the Apple ID on this - to my knowledge, or another Apple ID on my system. I'm a basic level user so any advice on this would be great.
Many thanks,
Elza

have been advised that my Apple ID will not work on this computer
Advised how, exactly?

PDFMaker loads but won't work in Word 2013 - Acrobat XI and DC - Win 8.1 Pro

OK, I opened a question that never got answered and it never was resolved...
Just updated to Acrobat DC - same problem exists...
I'm running Windows 8.1 Pro fully up to date..
I've uninstalled and reinstalled Office 2013 Pro (I have an Office 365 subscription so it's the click-to-run install).
I've uninstalled and reinstalled Acrobat Pro DC.
I've rebooted (a full restart, not Win 8's fast boot restart) between each installation.
I've tried this in multiple Office applications, none of them work EXCEPT for Outlook.
For the following I will use Word as my examples...
I've uninstalled all plug-ins and still it won't work.
I've tried running Word as Administrator.... still won't work.
OK... so this is what it looks like... as you can see the toolbar loads, but no icons...
https://www.dropbox.com/s/wsbs4kon3z4e965/Word%20Acrobat%20Screenshot.jpg?dl=0
When you click on those buttons... it goes through the motions as if it were creating the PDF... but no file is ever created...
If I right-click on a Word document and select Convert to PDF - it goes through the motions of creating the PDF, asks me where to save... and then a dialog box named "Acrobat PDFMaker" comes up saying " {Exclamation Point Yellow Triangle Icon} An unexpected error occurred. PDFMaker was unable to produce the Adobe PDF."
If I right-click on a text file... and select Covert to PDF, it immediately pops open a PDF of the text file. Same with any image file.
This was all working perfectly up until out of nowhere it stopped working on January 26, 2015. See my original posting here: Acrobat XI Pro Word 2013 add-in stopped working
I can Print to PDF using the PDF Printer without any problems.
Creating a PDF in Outlook, no problems...
I'm hoping somebody can figure this one out... I'm completely stumped.... and I'm usually very good at troubleshooting stuff.

Click to Run according to Microsoft:
https://technet.microsoft.com/en-us/library/jj219427.aspx
"Click-to-Run is a Microsoft streaming and virtualization technology that reduces the time that is required to install Office and helps you run multiple versions of Office on the same computer. The streaming technology enables you to download and begin to use an Office product before the whole product is installed on your computer. The virtualization technology provides an isolated environment for Office to run on your computer. This isolated environment allows you to run the latest version of Office side-by-side with an earlier version of Office that is already installed on your computer."

WEP Password Won't Work!

I have a Wireless router, which can do WEP, WPA and WPA2 encryption. If I have WPA2, then my desktop (Windows) can't remember the password, so that encryption is out for the mo, WPA won't work on our old laptop, and so WEP is all that's left. Every device in my house (including my iPhone) can connect, but my MacBook fails too! I have tried loads of different WEP passwords, and it can still connect to other WEP protected networks, but not mine! Is there anything I could have done, or is this a general problem?

Just like Windows stores your network profile info in C:\Document and Settings, the mac stores your network location in a plist file.
WEP is really for B/G networks, most newer networks are using WPA/WPA2 because it is more secure.
Can you connect to WPA2 Personal with the mac and that router?
Can you create a new Windows profile under network settings? (you should be able to).
Sometimes if you cannot connect using ASCII character for the password, look at your Key 1: on Windows for the Hex version of the password and try typing the Hex in the password box.
IF your password for WEP is short, like less than 8 characters, that may be the problem, it order to get WPA2 you need a password at least 8 characters long, 10 is better and more accepted by encryption schemas. Try adding 1234 to the end of your existing password (i.e. password1234) in the router, then input it again to see if it works. Try making the password exactly 10 characters long if you can.
WEP is like having no security at all, WPA/WPA2 is much more secure.

ITunes password won't work

Aplle TV keeps telling me to put in my password but when I do it won't work. But I checked it on iTunes and it worked there, as well as online. Then I went online and changed it but Apple TV still won't accept it. What gives?
Edit: Nevermind it's working again. I had to reset Apple TV.
Message was edited by: TomCat4680

Try some of these things
http://www.apple.com/support/itunes/troubleshooting/

Authorizing won't work!

Similar Messages

Maybe you are looking for