Auto Adjusting Wrapper Height

Hello, I would like to create a wrapper to house my entire website which i beleive is common practice. The problem comes in with the height of it. I would like to have my wrappers height (which will hold all of my other div's) automaticaly adjust when i add or delete div's. Is this possible? I have tried setting the height of the wrapper to Auto and 0 Auto.
Thank you for any help you can provide.

Wrapper height is automatically determined by the content inside it. You do not need to add height. If your wrapper contains floated elements, add overflow:hidden to your wrapper's CSS to prevent margin collapse.
http://colinaarts.com/articles/the-magic-of-overflow-hidden/
Nancy O.

Similar Messages

How to auto adjust the height of my div tag?

This is my website www.whistleandlisten.com
The white background is a div tag and whenever I add new content within the div tag I want it to auto adjust to extend the white div tag down as the page gets longer. I have tried css and set my height to auto but that makes it disappear. Right now I have to set it to a certain amount of pixels which gets annoying and sometimes I forget to after adding lots of content. PLEASE HELP.

To have an extensible height element, you should not apply the height property as you have done starting at line 9 of songcss.css
#whitediv
position: absolute;
left: 50%;
margin-left: -490px;
top: 0px;
width: 950px;
height: 2900px;
z-index: 1;
background-color: #ffffff;
background-image: none;
background-repeat: repeat;
background-attachment: scroll;
background-position: 0% 0%;
background-clip: border-box;
background-origin: padding-box;
background-size: auto auto;
color: #ffffff;
box-shadow: #ffffff;
overflow-x: visible;
overflow-y: visible;

How to auto adjust container dimensions

Is there a property I can set on Canvases, Panels, or other containers that would make them auto-adjust their height/width dimensions based on the child components. Basically, I would like for this to happen at load AND during run time. So if you update a Text control in a Canvas container it will resize itself so you can see everything.
Or do I have to write some complicated function to do this?

Sorry, I answered my own question about 2 minutes after asking it. When I got rid of the "width = 100%" attributes from the Text controls it worked. You also have to make sure you dont initially set the width and height values for the container.

Webi Chart Height Auto Adjust per Data

Can you auto adjust the Webi Chart Height based on amount of data shown?
Category Axis - Dimension called Request
Value Axis - measure called Views
when the requests displayed is about 10 or 15 on the category axis the chart looks good, but when the unique value of requests increases to lets say 50, the chart tries to cram them all in the same space instead of auto adjusting for a better view, Any way the height an be dynamic?

Hello,
As per my knowledge we can't do auto adjust..
Thanks,

How to make panel collection with auto width and height in popup dialog ?

Hi,
I have ony af:popup in that I have added af:dialog. And in this af:dialog I have added af:table which is surrounded by af:panelCollection.
Means my popup structure is like as below
af:popup
af:dialog
af:panelCollection
af:table
If I set resize="on" in af:dialog then I can able to resize my popup dialog but the panelCollection inside the af:dialog is not become auto adjusted.
I am able to make panelCollection width auto adjusted by using AFStretchWidh style class but not able to adjust its height.
Hope you can understand my problem and pls try to provide me its solution if you have already implemented this.
Regards,
DevD

I believe you are using af:panelGroupLayout because there are some other components except af:panelCollection, so try this combination
<af:popup id="p1">
<af:dialog id="d2" resize="on" stretchChildren="first">
    <af:panelStretchLayout id="psl2">
      <f:facet name="bottom"/>
      <f:facet name="center">
        <af:panelCollection id="pc1">
          <f:facet name="menus"/>
          <f:facet name="toolbar"/>
          <f:facet name="statusbar"/>
          <af:table var="row" rowBandingInterval="0" id="t1">
            <af:column sortable="false" headerText="col1" id="c1">
              <af:outputText value="#{row.col1}" id="ot5"/>
            </af:column>
            <af:column sortable="false" headerText="col2" id="c3">
              <af:outputText value="#{row.col2}" id="ot4"/>
            </af:column>
            <af:column sortable="false" headerText="col3" id="c2">
              <af:outputText value="#{row.col3}" id="ot3"/>
            </af:column>
            <af:column sortable="false" headerText="col4" id="c4">
              <af:outputText value="#{row.col4}" id="ot2"/>
            </af:column>
            <af:column sortable="false" headerText="col5" id="c5">
              <af:outputText value="#{row.col5}" id="ot1"/>
            </af:column>
          </af:table>
        </af:panelCollection>
      </f:facet>
    </af:panelStretchLayout>
</af:dialog>
</af:popup>Put only af:panelCollection in CENTER facet of af:panelStretchLayout and use other facets of af:panelStretchLayout for other components.

Auto resize width height in TextFlow controller

HI,
We are facing the problem in auto resize width height in TextFlow controller. Content is overlaping withing the controller or sometimes it's seems like not full containt displaying on the control.
We are writing the below code in the flashx.textLayout.events.CompositionCompleteEvent listiner to orgnize the above step:
     var controller:ContainerController = new ContainerController();
     textFlow.flowComposer.composeToPosition();
     var contentBounds:Rectangle = _controller.getContentBounds();
   _controller.setCompositionSize(_controller.compositionWidth, contentBounds.height);
   textFlow.flowComposer.addController(_controller);
   textFlow.flowComposer.updateAllControllers();
Please correct if are missing any steps above.
Regards,
R.BS

Hi,
I have got the solution on my last query. Below is the code to get rid of the content display and auto adjust the width & height of the controller:
var textHeight:int = Math.ceil(_controller.getContentBounds().height);
   if (textHeight > _controller.compositionHeight) {
     TextDataHeight = textHeight + 12;
               _controller.setCompositionSize(TextDataWidth ,TextDataHeight);
               textFlow.flowComposer.updateAllControllers();
I have also set the TextDataHeight = 50 to display complete paragraph text.
Due to this I have one problem arise that is indentation of the paragraph content or bulleted text on my content.
Is any one have the solution on this?
Looking forward for your response.
Regards,
R.BS

How do you reset the Work Area Bar to auto adjust?

This is something that's been a thorn in my side for a while. Maybe I'm just being OCD about it... but I've been wondering if there is a way, once you reposition the I / O points of the Work Area Bar (WAB) you can get Pr to go back to auto adjusting it to the end of your clip.
You can double-click it to get it to expand to the full length of the sequence, if you remember to do that... Sometimes I'm in a rush, or I have 10 sequences and I miss the fact that my WAB is not all the way to the end. I select and batch drag them all to Media Encoder and *POW*... I've forgotten to stretch the Out to end on one sequence ... and I have to re-render. A pain, yes, something I should have double checked, but at 2am these things can get missed.
So, can you get the Work Area Bar to auto adjust again?
If yes, it's probably something ridiculously obvious – but I'll take it!
Thanks
Stephen

I would have an issue with auto or a default for a number of reasons.
Not least this one...
I now place dummy clip ( black video) a distance off the end of my sequence to prevent the End of Sequence Marker displaying at the end of my edited material. I dont want that included in an export.
Here is another...
As I get to lock down and I am sending previews to clients...I insert Black Video head and tail of the edit so that the preview does not start jarringly on first frame video. I have I and Os marked so that I can simply export "Program at length (without black head and tail) when I come to master.
and...
Often I have edit versions (TVCs) on the same time line ( sequence) and I need to adjust WAB or I/Os to export them separately.
Automating stuff to eliminate our dumb moments doesnt help much because it just opens the chance of another dumb moment driven by expectation and forgetfulness. .
Mental checklist is the only way IMHO.

Auto-adjust on Compaq WF1907 LCD Monitor

Auto-adjust on Compaq WF1907 LCD Monitor
I have a vision problem and need to adjust the brightness on my Compaq WF1907 LCD Monitor to 30%. However, every time I turn the monitor 'ON' it performs an auto-adjustment which resets the brightness to 100%.
How can I lock in the 30% or turn the auto-adjust off ?

Hello,
You can try locking the settings: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00850175&tmp_task=useCategory&cc=us&dlc=en&lc=e...
-Chris
I work for HP.
Support Forums are now on your mobile phone: http://m.hp.com/supportforum

Auto Adjustment in Progress Flashing HP w1907

I have a HP w1907 monitor and i hooked it up to my macbook and it works great just it keeps poping up Auto Adjustment in Progress then goes back to what i was doing.
I have to white plastic, removiable battery macbook OS X 10.7.5 Lion.
if that is needed.
Plz and thank you for help!!!
~Gamer

Hello Diqoter,
You keep getting a message that auto adjustment in progress.
Have you tried to connect the monitor to another computer?
It might be that the auto adjustment button is stuck.
If you still have the disk that came with the monitor you can try to run the disk.
Here is a link to the manual for your monitor.
Do a hard reset of the monitor.
Unplug the power going to the monitor and hold down the power button for 15 sec, this will reset the hardware in the monitor.
Let me know how everything goes.
Have a good day.

HP 23xi Monitor gets fuzzy despite driver and auto adjustment

I have a HP pavilion dv2000 windows Vista with a HP 23xi monitor hookep up throug VGA. I installed the driver from HP's website and the text was no longer blured nor the images stretched. However, every single time I unplug my laptop and replug it back to the monitor the text gets blurry again... No matter what I do, auto adjustment, resolution, etc..
Can you help me fix this?
Thank you.

Please provide the complete model name and/or product number of the HP computer in question. HP/Compaq makes thousands of models of computers that are all different. The above requested information can be found on the bottom of your computer or inside the battery compartment.
The information you have provided, "HP pavilion dv2000", is incomplete and only identifies a series of computer models.
Please unplug the power from the monitor and then hold the power button in for 30 seconds. This should reset the monitor. See if that resolved your issues.
Please click the white KUDOS star to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

While editing photos in Aperture, I'm trying to make an "auto" adjustment to the exposure but the button is grayed out and consequently doesn't perform any function, please help! Thank you, Mike

While editing photos in Aperture, I trying to make an "auto" adjustment to the exposure,
but the "auto" button is grayed out and will not allow any auto function to take place.
Please help!
Thank you,
Mike

Mike, are you working with raw images?
For some raw images auto exposure is not available, have a look at this manual page:
http://documentation.apple.com/en/aperture/usermanual/index.html#chapter=18%26se ction=9%26tasks=true
Note: Automatic exposure adjustment is available for Aperture-supported RAW images only. If you want to adjust the exposure of another file type, such as JPEG or TIFF, see Working with the Exposure Controls. For a list of supported RAW file types, go to the Apple website at http://www.apple.com/aperture/specs.

Can we adjust ROW height in ALV report as like of Excel ?

Dear all,
Can we adjust ROW height in ALV report as like of Excel sheet ?
Can we increase/decrease the row height in the output display ?
How ?

kps204020 wrote:
Thanks a lot for your response.
I've tried your proposal, but it has no affect. The report cells show all their content using as much lines as necessary for this.This is the default behaviour for HTML table data (tables and cells expand to fit their content).
So I still have rows with lots of lines and rows with only a few lines mixed in my IR dependant on the cell content. Because some rows filling nearly the whole screen, it is difficult to get an overview with regard to adjacent rows.
I'm using Application Express 4.1.1.00.23. with Theme 21. Scarlet and Firefox 17.0.1.Are all users using Firefox?
Actually I'm working on my first APEX Solution for usage in my company and the customers demanding a solution for this topic . So I'm very keen to find a solution.
I'm very much looking forward to your response.I've been involved with similar issues in the past. My first response is simple: Does this data have to be shown in the report? Can the offending column(s) be removed from the primary report? They will still be visible in the single row view, and the detail view if there is one.
The second option is to create a detail view for the report with a structure that is better suited to the data involved, and make this the default view. (For an example of this, see the treatment of the PRODUCT_DESCRIPTION column in the detail view of the Products report in the Sample Database Application: click on the View Detail button on the Products page.)
The third possibility is some kind of customization of the presentation of the data. This will involve using some combination of HTML/CSS/Dynamic Actions/Plug-ins/JavaScript that you may not be familiar with: do you have experience of these? To go down that route you need to describe in detail how you want to present the data, or what behaviour is required when the data is too long, and share an example of the report on apex.oracle.com that we can work with.

New iMac brightness level keeps changing (auto adjust NOT checked)

Just got a new 27 inch iMac and keep on having to change the brightness level back to the brightness I prefer.
I do not have auto adjust checked, I put the brightness slider up to the level I like and after a while the brightness dims to what seems like the default level as its always down to the same spot on the slider...what gives? i just want it to stay where I want it...
Help.

I have same problem, of autobrightness being unchecked and my brightness going from full to about 3/4 bright
all by itself. I had that problem, then flickering of my screen also was taking place. I didn't bring my unit into Apple
because this autobrightness thing plus flickering would not happen on command,, and I wouldn't be able to show them properly. Well , finally my left side of the screen dimmed,, and that was the go ahead to bring it in to them
to show the left side of screen. I also told them about the flickering,, and the autobrightness, which I figured played a role into the final left side dimming. They replaced the backlight and the display LCD on warranty.
I have had it for about 5 days. The screen is equally lit (as should be), however, I discovered that my same old
problem of autobrightness, is slipping back to 3/4. So most of you have autobrightness problem in a sort of different way. I set mine to "torch" because my downstairs bedroom is dim (with one overhead light), but sometimes, just plain dark,, so I want to sometimes keep it at torch,, however, it still slips back. You would
almost think that if my surronding was dim or dark, that it would stay on torch if the autobrightness was really working properly. Go figure. I just tried SMC a short while ago,, I had tried, before my repair doing PRAM and the other one (I think VRAM). I also will unhook my second monitor to see if that is having an impact on things.
Do any of you in this post have a second monitor attached,, and have you tried unhooking it to see if the problem
is resolved?

Tabbed panel with adjustable/variable height based on content

Is there anyway that you can create a tabbed panel with adjustable/variable height based on content in each tab?

Abhishek,
Thanks for your reply, however, it is not working with Muse. I added the Javascript to the head section and adjusted iframe and it displays as a small square in the upper left hand corner, unable to view the whole page.
Inserted into head section --
<script type="text/javascript">
function resizeIframe(obj)
obj.style.height = 0;
obj.style.height = obj.contentWindow.document.body.scrollHeight + 'px';
</script>
inserted as an html object --
<iframe name="MycoSmooth" src="http://www.mycosmooth.com" frameborder="0" scrolling="no" id="iframe" onload='javascript:resizeIframe(this);' />
Below is the result:
The purpose is to have an independent website run the blogging capabilities, since muse doesn't directly support blogging as of yet.
Since the site is on a different domain, I am running into cross domain issues and it won't get the height of the page. The methods that apparently work use php and I am unsure how that would work in muse, if at all.

Auto Adjust Brightness late 2010 is gone

Auto adjust Brightness Button is gone?!?
Can you help me getting it back?
See

The auto brightness button is near the top - the one that starts with "Optimal".
In English, that button says "Resolution - best for built-in display".
I see what you mean, though, as resolution and brightness are really different things.
Anyway, glad your problem is solved.

Auto Adjusting Wrapper Height

Similar Messages

Maybe you are looking for