Runtime Errors OBJECTS_OBJREF_NOT_ASSIGNED

Runtime Errors         OBJECTS_OBJREF_NOT_ASSIGNED
Except.                CX_SY_REF_IS_INITIAL
Date and Time          24.09.2007 11:27:19
Short dump has not been completely stored (too big)
Short text
     Access via 'NULL' object reference not possible.
What happened?
     Error in the ABAP Application Program
     The current ABAP program "CL_TRIGGER_SELECTOR_PPF=======CP" had to be
      terminated because it has
     come across a statement that unfortunately cannot be executed.
What can you do?
     Note down which actions and inputs caused the error.
     To process the problem further, contact you SAP system
     administrator.
     Using Transaction ST22 for ABAP Dump Analysis, you can look
     at and manage termination messages, and you can also
     keep them for a long time.
Hi ,
        Can you please provide me the solution for the above error, it is related to configuration of Service Desk on SAP Solution Manager.

Hi,
check these notes,
783918
660005
This should solve your problem.
if not please mention when you ran into this error, which would help in providing a solution.
Feel free to revert back.
--Ragu

Similar Messages

BSP Application Runtime Error OBJECTS_OBJREF_NOT_ASSIGNED

Hi,
Iam using the standard BSP application Employee (CRMM_EMPLOYEE). Iam trying to run from Portal and getting following error.
ST22 short dump info:
Runtime Errors         OBJECTS_OBJREF_NOT_ASSIGNED
"OBJECTS_OBJREF_NOT_ASSIGNED" " "
"CL_CRM_BSP_IL=================CP" or "CL_CRM_BSP_IL=================CCIMP"
"GET_INSTANCES_OF_PRIMARY"
We already implemented the OSS note for this kind of issue.
0000616015
0000632746
Even we are getting this error
Any inputs???
Thanks,
DST
Message was edited by:
        DST

Hello,
check note: #989167
this should resolve the issue.
Best regards,
Dezso

Runtime error OBJECTS_OBJREF_NOT_ASSIGNED has occurred

Hi All,
I am trying to run a MM42 BDC in the background and I am getting the error - Runtime error OBJECTS_OBJREF_NOT_ASSIGNED has occurred. Kindly help

Dear Klaus sir,
Basicalliy the data is coming from dot net to sap by rfc(zobd_upload) and into table zobd..
after that we are using one program where we can fetch the data from zobd table and using one bdc to update the likp table.but in production likp table is not updating and zobd table updated..
how to resolve that issue?
is any bdc problem?

Runtime error OBJECTS_OBJREF_NOT_ASSIGNED when calling any standard GRC API's

Hello colleagues,
I always get the runtime error OBJECTS_OBJREF_NOT_ASSIGNED when calling any standard GRC API's
For instance, lets take Function Modules:
I tried almost any of them but in particular:
GRPC_API_CONTROL_QUERY Load the list of controls
GRPC_API_ISSUE_QUERY Retrieve issues of the case
GRPC_API_ORGUNIT_QUERY Load list of Organizations
GRPC_API_RMPLAN_QUERY Retrieve remediation plans of case
GRPC_API_RISK_CONTROLS Retrieve the controls of the risk
and etc.
All of them return the runtime error OBJECTS_OBJREF_NOT_ASSIGNED, however I've provided Object ID's in the right format,
The same is for corresponding classes,
Does anyone have such problem before?
Appreciate your responses,
Thank you,
Best Regards,
Anton

Hi Anton,
We need to pass value for I_SESSION_ID. Because, when i execute FM: GRPC_API_RMPLAN_QUERY by giving correct I_OBJECT_ID as shown below, i'm also getting the same error.
On executing..
Getting following dump.
And attached is the dump analysis .
Thanks
KH

Runtime error: OBJECTS_OBJREF_NOT_ASSIGNED

Hi everybody,
after Updating our (productive) SAP ERP 2005 System to SPS 11 we are facing a problem in the integration of another our testsystem e.g. in the DB13. Anytime I want to call upl the testsystem in the DB13 a runtime error appears.
Another message from the dump-analyzer is the breakup of the programm CL_DB6_TREE_NAVIGATOR=========CP, because of a 'NULL' reference.
I hope somebody can help me solving the problem. Please tell, if you need more informations.
Thanks in advance!!
Kind regards,
Lu

After the Update there were some problems in the DB2, I corrected the wron entries and the problem has gone. Don't know why?!

Runtime error objects_objref_not_assigned has occured

hi,
i created bdc call transaction using (TRIP) tcode. and calling in rfc. in the back end its working properly, and in report also i called this function module and tested, there also getting result
properly, but the problem is, when this RFC used in java application means it showing error like (RUNTIME ERROR OBJECT_OBJECTREF_NOT_ASSIGNED ) has occured.
plz give some solution.......................

Dear Klaus sir,
Basicalliy the data is coming from dot net to sap by rfc(zobd_upload) and into table zobd..
after that we are using one program where we can fetch the data from zobd table and using one bdc to update the likp table.but in production likp table is not updating and zobd table updated..
how to resolve that issue?
is any bdc problem?

ABAP Programming Error, OBJECTS_OBJREF_NOT_ASSIGNED, CL_GRFN_FPM_UTIL======

Hi All,
I am running GRC 10.0 SP07 when trying to add a response to a risk I get the following ABAP programming error,
Category               ABAP Programming Error
Runtime Errors         OBJECTS_OBJREF_NOT_ASSIGNED
ABAP Program           CL_GRFN_FPM_UTIL==============CP
                                                                                |
|    Access via 'NULL' object reference not possible.
You attempted to use a 'NULL' object reference (points to 'nothing')
|    access a component (variable: " ").
|    An object reference must point to an object (an instance of a class)
|    before it can be used to access components.
|    Either the reference was never set or it was set to 'NULL' using the
|    CLEAR statement.
Any help on the error would be greatly appreciated.
Thanx
Warren

Hi Victor,
When I am on a risk in NWBC, I select the "Response Plan" Tab, then when I try create a response I get the error.
This is the error that is displayed:
Error while processing your query
What has happened?
The URL call http://ravenclaw.cqs.co.za:8000/sap/bc/webdynpro/SAP/GRRM_WD_RNP was terminated because of an error.
Note
The following error text was processed in system GRC : Access via 'NULL' object reference not possible.
The error occurred on the application server ravenclaw_GRC_00 and in the work process 7 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: GET_OIF_INFO of program CL_GRFN_FPM_UTIL==============CP
Method: GET_INSTANCE of program CL_GRFN_OIF_BASE==============CP
Method: INIT_UIBB of program /1BCWDY/06EI2HED04NJ1RLM34O4==CP
Method: IF_COMPONENTCONTROLLER~INIT_UIBB of program /1BCWDY/06EI2HED04NJ1RLM34O4==CP
Method: HANDLEDEFAULT of program /1BCWDY/06EI2HED04NJ1RLM34O4==CP
Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/06EI2HED04NJ1RLM34O4==CP
Method: INVOKE_EVENTHANDLER of program CL_WDR_DELEGATING_VIEW========CP
Method: NAVIGATE of program CL_WDR_CLIENT_APPLICATION=====CP
Method: DO_NAVIGATION of program CL_WDR_WINDOW_PHASE_MODEL=====CP
Method: PROCESS_REQUEST of program CL_WDR_WINDOW_PHASE_MODEL=====CP
Thanx
Warren

Linking USERID to PERNR in IT01015 - Error - OBJECTS_OBJREF_NOT_ASSIGNED

Hello all,
Facing strange runtime error with a basic transaction when creating System User Name in Communication Infotype with my userid.
Infact I am working on ECC6 connected to EP7 on EHP3. My User ID is with super admin role having all authorizations except ABAP development and Role Maintenance (SU01)
I was working all these days without any problem, changing in between a set of PERNR's for my userid in IT0105. It worked well with in portal self services too.
Now in the same routine when I deleted IT0105/0001 for a PERNR and tried creating the record for the other PERNR it started giving short dump and henceforth not allowing me to link any pernr to any userid.
Here are the error details:
===================================================
Runtime Errors         OBJECTS_OBJREF_NOT_ASSIGNED
Date and Time          17.07.2010 10:57:06
Short text
     Access via 'NULL' object reference not possible.
What happened?
     Error in the ABAP Application Program
     The current ABAP program "CL_HRRCF_ERP_CONVERT_P_2_CAND=CP" had to be
      terminated because it has
     come across a statement that unfortunately cannot be executed.
Error analysis
     You attempted to use a 'NULL' object reference (points to 'nothing')
     access a component (variable: " ").
     An object reference must point to an object (an instance of a class)
     before it can be used to access components.
     Either the reference was never set or it was set to 'NULL' using the
     CLEAR statement.
Trigger Location of Runtime Error
     Program                                 CL_HRRCF_ERP_CONVERT_P_2_CAND=CP
     Include                                 CL_HRRCF_ERP_CONVERT_P_2_CAND=CM002
     Row                                     133
     Module type                             (METHOD)
     Module Name                             DO_POST_PROCESSING
==================================================================
Anyone who can decipher this for me.
Thanks a lot.

Vamshi,
I think you have got the response from this thread
Linking USERID to PERNR in IT01015 - Error - OBJECTS_OBJREF_NOT_ASSIGNED
If yes please close the thread
Thanks
Bala Duvvuri

Dump with error OBJECTS_OBJREF_NOT_ASSIGNED

Hi,
When I execute infospoke it is ending in Dump with the
runtime error OBJECTS_OBJREF_NOT_ASSIGNED
and exception CX_SY_REF_IS_INITIAL..
Please advice.
Thanks,
Vrrp

Hi VRRP,
check u'r sys version & sp level.......
Import Support Package 15 for SAP NetWeaver 7.0 BI (BI Patch 14 or SAPKW70015) into your BI system. The Support Package is available once Note 991094"

FB01 Error- OBJECTS_OBJREF_NOT_ASSIGNED/CX_SY_REF_IS_INITIAL

Hi, we have encountered several errors using Transaction FB01.. Please help. Thanks in advance.
Runtime Errors         OBJECTS_OBJREF_NOT_ASSIGNED
Exception              CX_SY_REF_IS_INITIAL
Date and Time          02/17/2010 17:52:57
Short text
     Access via 'NULL' object reference not possible.
What happened?
     Error in the ABAP Application Program
     The current ABAP program "SAPLSLVC_FULLSCREEN" had to be terminated because it
      has come across a statement that unfortunately cannot be executed.
Error analysis
    An exception occurred that is explained in detail below.    The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not      caught in    procedure "HTML" "(FORM)", nor was it propagated by a RAISING clause.     Since the caller of the procedure could not have anticipated that the     exception would occur, the current program is terminated.     The reason for the exception is:     You attempted to use a 'NULL' object reference (points to 'nothing')
    access a component (variable: "GT_GRID-TOP").     An object reference must point to an object (an instance of a class)
    before it can be used to access components.     Either the reference was never set or it was set to 'NULL' using the
    CLEAR statement.

Hi ,
We have the same problem here. DId you fix this error? Can you please tell us How to reolve this problem?
Thanks.

SMSY generating runtime error on adding new system

In our solution manager system, while trying to add a new system details
via SMSY transaction we are getting the Runtime Errors
OBJECTS_OBJREF_NOT_ASSIGNED.
Please find the dump details.
Runtime Errors         OBJECTS_OBJREF_NOT_ASSIGNED
Exception              CX_SY_REF_IS_INITIAL
Date and Time          29.05.2008 10:47:54
Short text
    Access via 'NULL' object reference not possible.
What happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPLSMSY_ACTUALIZE_DATA" had to be terminated because
     it has
    come across a statement that unfortunately cannot be executed.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
     caught in
    procedure "UPDATE_HOST_LCR" "(FORM)", nor was it propagated by a RAISING
     clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    You attempted to use a 'NULL' object reference (points to 'nothing')
    access a component (variable: "ACCESSOR").
    An object reference must point to an object (an instance of a class)
    before it can be used to access components.
    Either the reference was never set or it was set to 'NULL' using the
    CLEAR statement.
Information on where terminated
    Termination occurred in the ABAP program "SAPLSMSY_ACTUALIZE_DATA" - in
     "UPDATE_HOST_LCR".
    The main program was "SAPLSMSY_MAIN ".
    In the source code you have the termination point in line 2013
    of the (Include) program "LSMSY_ACTUALIZE_DATAF01".
    The termination is caused because exception "CX_SY_REF_IS_INITIAL" occurred in
    procedure "UPDATE_HOST_LCR" "(FORM)", but it was neither handled locally nor
     declared
    in the RAISING clause of its signature.
    The procedure is in program "SAPLSMSY_ACTUALIZE_DATA "; its source code begins
     in line
    1983 of the (Include program "LSMSY_ACTUALIZE_DATAF01 ".
Source Code Extract
Line SourceCde
1983 FORM UPDATE_HOST_LCR USING    IV_HOST STRUCTURE SMSY_HOST.
1984
1985   DATA:
1986         ACCESSOR        TYPE REF TO CL_SLD_ACCESSOR,
1987         VALUE           TYPE STRING,
1988         VALUE1          TYPE STRING,
1989         EX              TYPE REF TO CX_SLD_API_EXCEPTION,
1990         T_INAMES        TYPE SLD_T_STRING,
1991         INSTREF         TYPE REF TO CL_SLD_CIM_INSTANCE,
1992         SYSTREF         TYPE REF TO CL_SLD_CIM_INSTANCE,
1993         CLNTREF         TYPE REF TO CL_SLD_CIM_INSTANCE,
1994         LINKREF         TYPE REF TO CL_SLD_CIM_INSTANCE,
1995         INSTHANDLE      TYPE STRING,
1996         SYSTHANDLE      TYPE STRING,
1997         CLNTHANDLE      TYPE STRING,
1998         LINKHANDLE      TYPE STRING,
1999         T_KEYPROP       TYPE SLD_T_VALUELIST,
2000         I               TYPE I,
2001         PROPLIST        TYPE SLD_T_VALUELIST,
2002         PROPERTY        TYPE SLD_S_VALUELIST,
2003         FILTER          TYPE REF TO CL_SLD_FILTER.
2004
2005   DATA STRING          TYPE STRING.
2006   DATA IV_SYSTEM       TYPE SMSY_SYSTEM_SAP.
2007
2008   GET_SLD_TOP_INFO.
2009
2010 * Test the connection to the SLD server:
2011   TRY.
2012
>>>>>       ACCESSOR->PING( ).
2014
2015     CATCH CX_SLD_API_EXCEPTION INTO EX.
2016       VALUE = EX->GET_TEXT( ).
2017       MSGMACRO 'SCDT_LIS_IF' 'E' 11 'LCR_ERROR'.
2018   ENDTRY.
2019
2020
2021 * Catch all exceptions potentially triggered by the API:
2022   TRY.
2023
2024
2025 *   Create a new instance representation object for class SAP_BCSystem.
2026 *   If an accessor object is supplied in the constructor, the object
2027 *   reference of the representation can be used in other accessor
2028 *   methods.
2029       CREATE OBJECT SYSTREF
2030         EXPORTING
2031           CLASSNAME      = 'SAP_ComputerSystem'
2032           ACCESSOR       = ACCESSOR.
I am already at the latest support package i.e13
Regards
Anthony

Hi Anthony
Is your problem solved . I M facing the same problem . I found another thread which is suggesting to follow SAP note 1042815. But it seems that we need to change Some standard include to get it fixed .
Does SAP suggest to change their own program .
Waiting for your reply .

Runtime error from null value

I have a request to create a Function Module that will be assigned to an Action Box, which when executed will copy long text for Quality Notification tasks. I have the module created and working, but after my code is executed a runtime error happens due to a null value being passed to a method in the SAP program QM07_UPDATE_ACTIONBOX. It looks to me like it is trying to perform some kind of cleanup tasks, and is trying to delete a node tree that does not exist. My code did nothing with any kind of node tree, so I am not sure how to avoid this runtime error. My code works as desired, except for this error that occurs after my code is processed. Any assistance would be greatly appreciated! Below are more details from the error received...
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not caught in procedure "QM07_UPDATE_ACTIONBOX" "(FUNCTION)", nor was it propagated by a RAISING clause. Since the caller of the procedure could not have anticipated that the exception would occur, the current program is terminated.
    The reason for the exception is:
    You attempted to use a 'NULL' object reference (points to 'nothing') access a component (variable: "TREE_ACTIONBOX").   An object reference must point to an object (an instance of a class) before it can be used to access components. Either the reference was never set or it was set to 'NULL' using the CLEAR statement.
Information on where terminated
    Termination occurred in the ABAP program "SAPLQM07" - in "QM07_UPDATE_ACTIONBOX". The main program was "SAPLIQS0 ".
    In the source code you have the termination point in line 39 of the (Include) program "LQM07U12". The termination is caused because exception "CX_SY_REF_IS_INITIAL" occurred in procedure "QM07_UPDATE_ACTIONBOX" "(FUNCTION)", but it was neither handled locally nor declared in the RAISING clause of its signature.
    The procedure is in program "SAPLQM07 "; its source code begins in line 1 of the (Include program "LQM07U12 ".
   28 * bei Tree werden Knoten und Items gelöscht bei Table Control wird
   29 * nur g_control_tab neu aufgebaut
   30   if g_tree = c_x.
   31 *---- Löschen der bestehenden Knoten und Items
   32
   33 * Tabelle der Knotenschlüssel erzeugen
   34     loop at g_node_tab into l_node.
   35       append l_node-node_key to l_dnodes_tab.
   36     endloop.
   37
   38 * Items
>>>>>     call method tree_actionbox->delete_all_items_of_nodes
   40       EXPORTING
   41         node_key_table          = l_dnodes_tab
   42       EXCEPTIONS
   43         failed                  = 1
   44         cntl_system_error       = 2
   45         error_in_node_key_table = 3
   46         dp_error                = 4.

Yes, I have searched the notes. I used the keywords suggested in the dump...
If the error occures in a non-modified SAP program, you may be able to find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following keywords:
"OBJECTS_OBJREF_NOT_ASSIGNED" "CX_SY_REF_IS_INITIAL"
"SAPLQM07" or "LQM07U12"
"QM07_UPDATE_ACTIONBOX"

AJRW-Runtime error

Hi
I am executing AJRW for the Fiscal year change. In the test mode, its showing no errors. But when i run it in production mode, it shows runtime errors as
OBJECTS_OBJREF_NOT_ASSIGNED. CX_SY_REF_IS_INITIAL. Can anyone kindly tell me what could be the problem.
Kindly treat this as very very urgent as we are unable to take any report of the assets.
Regards
Sachin
09928658919

Hi Sridevi
Thanx a lot for the quick response...There is no error msg as such. If i click on JOB LOG, it says,
ABAP/4 processor: OBJECTS_OBJREF_NOT_ASSIGNED
The msg class is 00 and msg no 671 and msg type A
Could u kindly help as this is quite urgent.
Thanx and Regards
Sachin

Runtime error in starting Lightroom

I receive the following message when I try to start Lightroom:
Microsoft Visual C++ Runtime Library
Runtime Error!
Program:...Files\Adobe\Adobe Photoshop Lightroom 1.2\lightroom.exe
This application has requested the Runtime to terminate it in an unusual way.
Please contact the application's support team for more information.
Lightroom ran well for several days and then failed to open with the above message.
I have tried everything I know to do (uninstalled and reinstalled the application, restored the computer to a restore point before Lightroom was originally installed, etc.) and do not know were to go from here. Suggestions would be appreciated.
I am using Windows XP sp2 and have 4 GB of ram and 250 GB of hard disk space.
Thanks,
Cliff Culp

Aha! A fix! Please look at this...
http://www.adobeforums.com/cgi-bin
bob frost, "Help! Runtime error after Lightroom 1.1 install!" #10, 27 Jun 2007 6:54 am

Runtime error while executing rule

Hello All,
While executing the DTP for a cube, im facing the error as Runtime error while executing rule -> see long text .
For this source is another Cube, where im loading the data from Cube to Cube.
Error Description are as follows:-
Error Location: Object Type    TRFN
Error Location: Object Name    0T9SCR6Q4VWS1SOPNRRBOY1YD51XJ7PX
Error Location: Operation Type ROUTINE
Error Location: Operation Name
Error Location: Operation ID   00034 0000
Error Severity                 100
Original Record: Segment       0001
Original Record: Number        557
and Also descripton is :-
Diagnosis
    An error occurred while executing a transformation rule:
    The exact error message is:
    Division by zero
    The error was triggered at the following point in the program
    GP4H0CW3MLPOTR3E8Y93QZT2YHA 4476
System Response
    Processing the data record has been terminated.
Procedure
The following additional information is included in the higher-level
node of the monitor:
   Transformation ID
   Data record number of the source record
   Number and name of the rule which produced the error
Let me know ur valuable suggestions on these error...
thanks.

Hello,
I have checked all the transformation and End Routines.All are working fine.Yesterday i have loaded some data into it, but today its gettting errored out.
Checked completely in the forum for threads related to this, but couldnt find proper thread which had solutions....
thanks,
srinivas.

Runtime Errors OBJECTS_OBJREF_NOT_ASSIGNED

Similar Messages

Maybe you are looking for