Auto answering phone call via bluetooth

Yesterday, I had two incoming calls via blue tooth while driving. With my Droid X, it would answer automatically. With the S3, it did not. Any advice is appreciated. Thanks in advance.

Not sure why it would do that. You can try resetting your device. Sometimes that will clear up odd behaviour (nothing will be lost):
Hold down the Home and Power buttons at the same time and continue to hold them down until the Silver Apple appears (up to 30 seconds). Once the Home screen comes back up, see if the problem is resolved.
Cheers,
GB

Similar Messages

Want to make phone calls via bluetooth on my iPhone from iPad

I can link my Garmin GPS to my iPhone via Bluetooth and make or receive phone calls.
I would like an iPas app that provides the sametype functionality including:
Make calls
Receive calls
Look uphone numbers
Is this possible? Using what app?

There are a couple of Apps out there that will allow you to use a Google Voice phone number to make and recieve calls via the iPad. I'm not sure exactly what you are trying to do. If you are trying to replicate the Garmin / iPhone setup I don't think that is possible.
Google Voice setup - gvconnect and talkatone. (wifi)
Skype - I think that you can make phone calls via Skype and Wifi.
I don't have a clue as if it is possible to make a phone call over 3G via the iPad.
Paul

Answering a call via Bluetooth.

I have the 4s and the latest SW. I have the jay bird freedom 3 BT headset. While connected to the phone and in my ear and when a call comes in, it does not matter how I answered the call. I have to look at the phone and physically select the "audio device" and the my listed headset in order to get the call. Why does it not default to the headset when it is plugged in and connected?

Sounds like your headset is not paired properly with your phone. When a call comes in, does it ring through the headset? If not, you might want to try resetting everything. First, delete the bluetooth headset's profile from your phone, then turn bluetooth off. Follow this by resetting your phone: Press the sleep/wake button and home button at the same time, keep pressing until you see the Apple logo, then release(ignore the slide to power off). Follow your headset mfg's directions to reset your headset. Once done, pair them both again.

Experiencing problems with connecting my iPhone 6plus to my Hyundai sonata phone kit via Bluetooth, Experiencing problems with connecting my iPhone 6plus to my Hyundai sonata phone kit via Bluetooth

Experiencing problems with connecting my iPhone 6plus to my Hyundai sonata phone kit via Bluetooth, Experiencing problems with connecting my iPhone 6plus to my Hyundai sonata phone kit via Bluetooth

Hello NiiTeye,
I'm sorry to hear you are having these issues with your iPhone. If you are having issues connecting to your car stereo via Bluetooth, you may find the troubleshooting steps outlined in the following articles helpful:
Get help using your iPhone, iPad, or iPod touch with your car stereo - Apple Support
iOS: Troubleshooting Bluetooth connections - Apple Support
Sincerely,
- Brenden

Can TP make calls via bluetooth phone?

I am able to tether my HTC Aria and HP Touchpad via bluetooth and can receive calls on the TP (pretty cool) but I cannot dial on the TP (select a contact) and get the phone to make the call.
Is this even possible or is it strictly a Skype feature?
I figure I am expecting too much since the TP is simply acting as an Bluetooth headset.
Post relates to: HP TouchPad (WiFi)

Yup. I do it with my Samsung Env 3. I know a few phones won't work but a lot do. Give it a try.
You have to get the phone/dialer to use bluetooth instead of Skype in preferences.

Phone book via bluetooth

This Forum stuff is new to me, so not sure i'm doing this correctly. I have just bought a 3G i-phone. When i bluetooth it to my car (Audi A6) the phone works fine (handsfree etc) but i cannot access my phone book via the car system. Is this a car problem, phone problem, or a me problem? Help please!

As others have posted, it seems that the iPhone (both original and 3G models) only officially supports the Hands-Free Profile (HFP) and Headset Profile (HSP) hence the phonebook and other problems.
However, I also had a first generation iPhone and it worked perfectly with my 2007 A6 Allroad ... full access to phonebook, recent calls, missed calls ... the whole nine yards.
I have the same problem as you with the 'new and improved' iPhone 3G. I can pair from the phone to the car and get a very basic functionality (i.e. no phonebook or call register). If I recall correctly, you need to initiate the pairing the other way round ... i.e. starting from the car. When successful the phonebook is copied as part of the initial pairing. I can't get this part to work for me as the iphone is invisible to the Audi even though the iphone says it is 'discoverable'.
Applecare will just give you the standard line about not being able guarantee to support every phone out there.
If the 3G is working with other car makes (BMW and the like ...) then it might be an Audi problem. They seem to have created a workaround for the original iPhone's shortcomings so let's hope the can do it again for the 3G
Audi Guy
PS. The following is a list of profiles supported/not supported that I lifted from another post ...
iPhone Support:
Hands-Free Profile (HFP)
Headset Profile (HSP)
iPhone Does Not Support:
Advanced Audio Distribution Profile (A2DP)
Audio/Video Remote Control Profile (AVRCP)
Basic Imaging Profile (BIP)
Basic Printing Profile (BPP)
Cordless Telephony Profile (CTP)
Device ID Profile (DID)
Dial-up Networking Profile (DUN)
Fax Profile (FAX)
File Transfer Profile (FTP)
General Audio/Video Distribution Profile (GAVDP)
Generic Access Profile (GAP)
Generic Object Exchange Profile (GOEP)
Human Interface Device Profile (HID)
Intercom Profile (ICP)
Object Push Profile (OPP)
Personal Area Networking Profile (PAN)
Phone Book Access Profile (PBAP)
Serial Port Profile (SPP)
Service Discovery Application Profile (SDAP)
SIM Access Profile (SAP,SIM)
Synchronisation Profile (synch)
Video Distribution Profile (vdp)
Wireless Application Protocol Bearer (WAPB)

IPhone 6 Plus 64GB (iOS 8.1 or 8.1.1) springboard crashes repeatedly when making phone calls via Continuity on Macbook Pro Retina Mid 2014 using Yosemite 10.10.1

I USED TO be able to make phone calls using continuity on my MacBook Pro (Retina, 15-inch, Mid 2014) with Yosemite (10.10) via my iPhone 6 Plus on iOS 8.1 without any problems. Once I updated Yosemite to 10.10.1, my iPhone's springboard would continually crash where it brings up the Apple logo and quickly restarts repeatedly until I end the call. Just so that you know, I am able to stay on the call while this is occurring the whole time.
I need to reiterate, this all started happening as soon as I updated Yosemite to 10.10.1 while still on iOS 8.1. I know this because I made a few phone calls (loving the feature), updated Yosemite to 10.10.1, then made a few phone calls afterwards, and this started happening.
When iOS 8.1.1 came out, I eagerly updated hoping this issue would go away, and it did not. I'm hoping Apple notices this post. If anyone else has this problem, please contact Apple and chime in this post as well. Thank you Apple for incorporating continuity calling. I love this feature, but need to use it without my phone's springboard constantly crashing.

I have this issue as well. I am using an iPhone 6 plus, iPad Air 2, 5K iMac, and MacBook Pro. When I make a continuity calls from any device, the springboard crashes. This only happens with outgoing calls, incoming calls are functioning normal. I am currently working with multiple Apple Senior Advisors, and they are working directly with iOS a engineers. I have an active open case and will update this thread when a resolution is found.
Just a tip for everyone with this issue, restoring your devices and setting them up as new WILL NOT correct this issue. Save yourself the hassle. I did this with my iPhone, iPad, and MacBook and the issue still persists.

Answering phone call got problem!!

After I update my iphone 5 to IOS 7.0.2, many times when I answering a phone call, it will auto open speaker. How come it will be like this? Previous version it didn't happen this at all.

Not sure why it would do that. You can try resetting your device. Sometimes that will clear up odd behaviour (nothing will be lost):
Hold down the Home and Power buttons at the same time and continue to hold them down until the Silver Apple appears (up to 30 seconds). Once the Home screen comes back up, see if the problem is resolved.
Cheers,
GB

Transfering Phone Book via Bluetooth

Hello, unfortunately the USB port of my 8330 Curve has broken and I do not have a backup of my contact list - over 100, not sure why I can't retrieve the back up, but my question is.... Can I not transfer from one phone to the other via bluetooth and if so, could someone please help me. Thank you so very much!

You can connect your device via Bluetooth with Desktop Manager and have backup of your device. The transfer of address book via Bluetooth is not available.
Check the below knowledge base for connecting your device via bluetooth.
How to set up Bluetooth connectivity with BlackBerry Desktop Manager
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit

Using Outlook to make a phone call via lync

I have Outlook 2010 and Lync 2010 clients installed on a workstation, with full VoIP for Lync for external and internal calls.
I want to know if its possible to have Outlook place a voice call via lync automatically based on a rule or via custom VBA in outlook? Is it possible to do the same but send SMS instead of a voice call?
It seems possible as the tools integrate quite well, but I haven't found any documentation supporting it yet.

You can call a phone contact in outlook, then it will open a Lync Window.
But not sure if a rule or custom VBA can make it automatically.
You may consultant the outlook expert.
Lisa Zheng
TechNet Community Support

KX-TGE260 Won't Auto-Answer FAX Call

Just replaced an older residential Panasonic remote/base station telephone system with the new KX-TGE460 system. Older system used to auto-direct an incoming FAX system to the FAX, which is contained in an HP all-in-one printer.
After install, I found the only way to get the FAX to auto-answer an incoming FAX was to set the # of rings to the same as the answering machine in the Panasonic base station. Clearly, this wasn't an option, as a voice caller gets the FAX tones from the machine as well (and over) any voice message left, while an incoming FAX is recorded as voice on the answering machine. Again, this wasn't a problem with the old system.
Also, when I went through the online support chat system for this question, which was linked to my model number, the chat (after a lengthy wait) indicated that I was "at the wrong department" and gave me the call-in number for support. I called and spoke to a support rep (after a short wait, thank goodness) who told me that there was no way this setup would work, and there was "no way to set up the new system to auto-direct the FAX signal to the FAX machine." In addition, when I told her I was on an ATT u-verse VOIP system, she told me that "my VOIP voice system isn't compatible with any of the Panasonic wireless systems." Ludicrous and totally incorrect, as the system (which transmits voice signals over an analog output from the gateway/modem) works just fine. It was pretty clear that she didn't even know what a VOIP was, or how an ATT u-Verse, Verizon FIOS or any other of the VOIP systems worked. Since most landline carriers and cable phone operators are convering rapidly to Internet-signal voice service and getting away from POTS, Panasonic is way behind the curve in training its support staff.
Just in case anyone else has encountered this problem and has a fix, thought I'd post it here; the intent isn't to slam Panasonic, but to see if there's a workaround that someone's found.
Thanks.

Hi MHixson,
Welcome to the HP Forums!
I am currently not familiar with your KX-TGE460 system, and VOIP system. However, I found this website while searching. Faxing with VoIP Services. If Medium speed doesn't work, you can try setting it to Slow.
You can also try setting the printer to 4 or 5 rings, and then the answering machine to 6 rings.
This website applies to every HP All-In-One printer. How to connect your HP Fax Device to an ISDN, ADSL, PBX, or VoIP line.
Hope this information helps, and have a nice day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

6120c delay when answering a call with bluetooth h...

Hi,
I have a Nokia 6120 classic and a Jabra BT2010 headset. When using the headset, every time I answer a call I have a 3 second delay until I can hear anything.
During these 3 seconds I hear 3 beeps: one the moment I answer the phone, a second one a couple of seconds after that, and a third one just before I can start to speak.
Does someone have the same problem? Is this a firmware problem and will be fixed with a new firmware? I have firmware 3.83.

that is a bit strange, i have used Nokia BT headset BH-900, BH-201 and BH-600 on the 6120 and there is no delay...
it could be related to your headset... if there is a way to factory re-set that jabra? i had a jabra before, and it can be done if i remeber correctly,when you keep pressing volume up + power on for 10sec and watch the LED change color...

Recording phones calls via skype

I need to record a long phone call and rather than do it directly from the landline i want to try and do it with Skype and record it directly onto the laptop for easy access and transcribing.
could anyone tell me if this is possible and if so how to do it
Thanks
Bruce

Use Audio Hijack Pro <http://www.rogueamoeba.com/audiohijackpro/>
See the Help section "Recording Voice Chat". There is even an option to record stereo, your voice in one channel, the other in the second channel.
There is also Call Recorder <https://extras.skype.com/623/view>

How to copy phone book via Bluetooth to a G35

I have paired my 3G with my car (Infinity G35 2008) and it works fine. But I am unable to download the phone book. I get a message in the car that says if needed enter the 1234 passkey, but that never happens on the phone. 30 minutes later still on the same screen.
Any clues?

Blame Apple about that. The Bluetooth in iPhone is crippled to headset only. Make me think that iPhone 3G is like previous Verizon phones with all Bluetooth feature capped. I suggest you to send a feedback to Apple about that particular problem.
www.apple.com/feedback.

IPhone 4 audio unavailable when calling/answering phone calls.

When I place a call, or receive a call, I am unable to hear anything on the other end, and the other user can't hear me.
If they call and leave me a message, I can listen to that just fine. All other audio works - apps, music, voicemail, etc. I can even Facetime chat without problems, it's just my phone call that drops out.
I've tried the headphone trick, as well as compressed air, restarted, left off for long period of time, removed/reinserted SIM card. None of it seems to help. Any thoughts?

Hi Friend,
Try to use the volume buttons to adjust it. Go to Settings>>Sounds, and check if Adjust Volume with buttons is turned on.
Check in Settings>>General>>Restrictions if there is a restriction for volume turned on. If yes, turn it off and set the volume limit as higher as possible.
The speaker is easy to break if wet, even wet for a little. My girlfriend's iPhone speaker broke with some drops of a drink.
Anyway, check if Restrictions is turned on, rebbot your idevice, be sure you have selected a pernonalized sound (ringtone) that works (change to a standard ringtone), check if "Do Not Disturb" is turned off.
Go to Settings >> Sounds and turn Adjust with Buttons on. In Message sound, be sure you set a standard Apple ringtone. Tap it again to listen the ringtone ringing. If not ring, well, your speaker probably has a problem.
Hope it helps

Auto answering phone call via bluetooth

Similar Messages

Maybe you are looking for