Auto correct the inputs received to Initial Capital and other letter small

Hi,
Please help to solve this..
In HRMS is there any auto correct the inputs received to Initial Capital and other letter small in HRMS. E.g. If data is received by HRMS as 'RAMA' HRMS should auto correct to 'Rama' from legacy system(Input Files)
Thanks-

Is this a migration question? If so, you can apply a mask to the source data at the point of calling the api, e.g.
p_last_name => INITCAP(source_last_name),
etc

Similar Messages

I'm using my iPad in a cafe that I work at. Some songs are quiet and some are loud. I'm trying to find a device that would auto correct the volume so that it is the same going in to the house sound. Any ideas? I told my boss that it doesn't exist but...

I figured I would try.

Hi Dupree29,
Yes this is possible to do on your iPad. Go to Settings -> Music and turn on "Sound Check". This will help to normalize the volume levels of all songs on your iPad. Its not perfect, but it definitely helps to auto correct the volume of songs.
If Sound Check doesn't work well enough for you, there are audio devices out there called compressors and limiters that will process audio levels. But that is definitely a more advanced (and more expensive) alternative.
Hope this answers your question!
~Joe

How do you correct the merging of contacts, calendars, etc with other members of your family on your account?

How do you correct the merging of contacts, calendars, etc with other members of your family on your account?

Wow!
I'm not going to be of much use regarding answers but I sure am going to watching this post like a hawk for any replies. My package is a slightly diluted version of this and I do find the BBtalk and data limits hard to make the most of as well.
If nothing else this totally highlights how complicated BT have managed to make their packages.
A cynic would assume that they are trying to catch us out at every step and for us to either be overspending or not really getting the moneys worth.

Sysgen : How to read the input port data type, width and rate dynamically in a masked subsystem ?

Hello everybody,
     I am designing a general purpose block in system generator. I pass the user parameters to the block through masking it. Some user parameters can change the block configuration. The input port data type, width and rate can also affect the block configuration.
     The problem is that these values (input port data type, width and rate) are subject to change. So I should read them dynamically, then change the block configuration through programming the "Initialization Commands" field. But unfortunately there is no straight way to read the input port information.
     There are some methods in for example the "Black Box". these are:
input_width = this_block.port('din').width;
input_rate = this_block.port('din').rate;
But these methods are not applicable to a masked subsystem.
I have tried other ways also. You can find them below. None of them worked.
Does anybody know how can I solve this problem?
Other ways I tried:
1)
design_name([],[],[],'compile')
q=get_param(gcb,'PortHandles');
get_param(q.Inport,'CompiledPortDataType')
get_param(q.Inport,'CompiledPortWidth')
get_param(q.Inport,'CompiledPortDimensions')
design_name([],[],[],'term')
2)
ssGetInputPortDataType
3)
ts = Simulink.Block.getSampleTimes([gcb '/Input'])

Today we rely on Simulink to perform parameterization of your designs in two ways:
Parameterizable Subsystems and Blocks : Parameters themselves can be MATLAB expressions that need to be evaluated for which we need the MATLAB interpreter
The very useful Rate and Type propagation or Simulink compilation that allows us to specify types & rates in one location that gets systematically propagated to all.
To truly make the HDL Netlist that is generated from SysGen parameterizable, we would have to implement some of this capability in the HDL netlist itself by:
Using Generics(VHDL) or Parameters(Verilog) - We would have to capture the bit width(type) propagation through levels of hierarchies and finally parameterize the IP itself based on this value
Since IP itself does not have this capability through generics, we would have to package a separate tcl script that updates the IP parameterization appropriately in response to top level parameters(or GUI parameters)
Interpreting MATLAB expressions and translating them into VHDL/Verilog expressions (alternatively tcl expressions of IP). In simulink, mask parameters can be passed from one level to the next. Also parameterization of a block can be composed of Matlab expressions using variables from ancestor masks & the MATLAB interpreter – so we will need to somehow capture that as well.

I installed my new Apple TV and successfully completed the configuration (Wireless network, Apple ID, and others) yet I am always in the Computers and Setting page- can't move to the main page – any idea on what and how, please?

Hello, I installed my new Apple TV and successfully completed the configuration (Wireless network, Apple ID, and others) yet I am always in the Computers and Setting page… can’t move to the main page – any idea on what and how, please?

Welcome to the Apple Community.
Unfortunately, a number of users appear to have encountered this problem. Some of these users have reported that the problem just disappears the following day or shortly after. Other users have found various other solutions to this problem.
Firstly, are you receiving any date and time errors when you turn on your Apple TV?
Check that you are properly connected to the Internet, by ensuring that you have a proper IP address and not one starting with 169. Also check that your location for the iTunes Store is set correctly, if so you might try changing it and then changing it back.
If the problem persists try restarting the Apple TV by removing ALL the cables for 30 seconds, or resetting it using the reset option under general. You should also try restarting your router, or if this doesn't work you might like to try a restore.

Under Option Summary, the usage includes AUDIO, PHOTOS, APPS and OTHERS. What are the things included in OTHERS? It is using up my storage space.

Under Option Summary, the usage includes AUDIO, PHOTOS, APPS and OTHERS. What are the things included in OTHERS? It is using up my storage space. Can someone please help?

To add to Nick's comments, "Other" is typically approximately 1 gigabyte. Occasionally for some users, it gets much (many times) bigger because they have some corrupt files. If that's the case, it's best to restore the iPhone.
Plug the iPhone into (current) iTunes, let it sync, then choose "Restore" on the right. If restoring from the iPhone backup does not help, then restore (again) as new and then manaully sync the iPhone.

Can i delete the apps that comes with the 5s phone, like itunes, weather and others that i won't be using?

can i delete the apps that comes with the 5s phone, like itunes, weather and others that i won't be using?

You can't delete some of the native apps but you can put them away in a folder OR some of them you can make invisible by restricting them (iTunes for example).

[svn:bz-trunk] 23143: Certain code needs to check the existence of the class validation validator (some brokers and other listeners) during message broker init, however the validator was not being created till the very end of the method .

Revision: 23143
Revision: 23143
Author:   [email protected]
Date:     2011-10-27 06:31:02 -0700 (Thu, 27 Oct 2011)
Log Message:
Certain code needs to check the existence of the class validation validator (some brokers and other listeners) during message broker init, however the validator was not being created till the very end of the method. Promote it to be at the top instead of at the bottom.
Modified Paths:
    blazeds/trunk/modules/core/src/flex/messaging/config/MessagingConfiguration.java

Revision: 23143
Revision: 23143
Author:   [email protected]
Date:     2011-10-27 06:31:02 -0700 (Thu, 27 Oct 2011)
Log Message:
Certain code needs to check the existence of the class validation validator (some brokers and other listeners) during message broker init, however the validator was not being created till the very end of the method. Promote it to be at the top instead of at the bottom.
Modified Paths:
    blazeds/trunk/modules/core/src/flex/messaging/config/MessagingConfiguration.java

I upgraded my 3rd gen iTouch to iOS 5.1.1 and now its speed to repond is slower and the battery goes flat quicker than before the upgrade. Skype, Sky iCloud and other apps are turned off (I think). Has anybody else suffered with this? Any ideas?

I upgraded my 3rd gen iTouch to iOS 5.1.1 and now its speed to repond is slower and the battery goes flat quicker than before the upgrade. Skype, Sky iCloud and other apps are turned off (I think). Has anybody else suffered with this? Any ideas?

Purplehiddledog wrote:
I do backup with iCloud. I can't wait until the new iMac is available so that I can once again have my files in more than 1 location without needing to rely solely on the cloud.
I also rely on iTunes and my MacBook and Time Machine as well as backing up to iCloud. I know many users know have gone totally PC free, but I chose to use iCloud merely as my third backup.
I assume that the restore would result in my ability to open Pages and Numbers and fix the problem with deleting apps, but this would also mean that if my Numbers documents still exist solely within the app and are just not on iCloud for some reason that they would be gone forever. Is that right?
In a word, yes. In a little more detail.... When you restore from an iCloud backup, you must erase the device and start all over again. There is no other way to access the backup in iCloud without erasing the device. Consequently, you are starting all over again. Therefore, it would also be my assumption that Pages and Numbers will work again and that the deleting apps issues would be fixed as well.
If the documents are not in the backup, and you do not have a backup elsewhere, the documents could be gone forever.

I have opened a page in WORD and cut and tried to paste a photograph to it. The result is that the page is now frozen with the coloured circle{ cursor} spinning around and not letting me do anything with the page. I only wish to close it down. Thank you

Have opened a page in WORD and tried to cut and paste to it. The result is that the page is frozen with the coloured cursor just spinning around and not letting me do anything with the page. I only wish to close the page down. Thanking you

Many thanks for your help in this instance. The command-option-shift-esc and force quit solved the problem for me . Now I can get back to using my computer once more

How to turn auto-correction the opposit way?

The auto-correction Works the way that I as a user has to recject the suggestion from the system, if not, the suggestion will be put into mytext. This is really anoying and completeley unlogical to me. It should be the way that I should actively chose the suggestion, if not, my own text should be prefered. Is there a way to turn this upside down the way that the system's suggestion only reamin as a suggestion until I actively chose it? In case not, why not?

to do that you need to go back to Pages 4

Sometimes i write write emails in French and have a need to auto correct the spelling in French.age.

I often have to write emails in French and am terrible with spelling the words. Is there an auto correct feature that I can use to get the correct spelling of my French emails?

This article may be of some use to you:
http://kb.mozillazine.org/Dictionaries

Auto correcting the word: me??

Hi,
Sigh, I have a really annoying problem with the iPhone. I just recently upgraded to the iPhone 4 and love it, love it, love it... Except when I'm texting. The ONLY problem I'm having just started recently and I don't know how to fix it. It's too hard to Google this, too. Everytime I type the word "me", it types this: me' So, let's say I want to say "Let me have that", the iPhone will type this "Let me' have that". I don't know how to un-autocorrect this! It doesn't even make sense as far as the English language goes, right? Does anyone know how to fix this to STOP putting the apostrophe right after the word "me"? Thanks!!!

You're awesome. I was hesitant hitting that reset button, not suring where it'd take me, but you rock. Thanks so much!!

I can see the input but have no output - and more!

Howdy,
I am dead in the water and am not sure what to do next.
Here's my system and everything attached to it.
OSX 10.4.11 / 2 x 2.66 Intel / 8 gb ram Mac Pro 1,1
Apogee Ensemble - Firewire bus 1
Maestro 1.7
Daemon v1.4
Driver v2.2Ofc9
Firmware v1.9.24
FPGA v1.31
CPLD v1.6.1
Powercore X8 - Firewire bus 2 (separate card)
Software version 3.2.0.38
Hardware version 3.2.0.36
Firmware 3.0.0.3
Novation Remote SL 25- USB
Line 6 Tone Direct - USB
POD Farm / Gear Box
Everything was working fine until recently.
Now, I cannot monitor inputs when recording real instruments. I can see the input on the level meters in Ensemble and in Logic's Channel strip but can't get any output in Stereo or headphones. After I record, it will playback what was input but without being able to hear what I'm playing, it's kind of pointless.... as a sidenote, I can hear / monitor the input normally if I record MIDI or software instrument.
Also, I am getting the" Record drive/partition “Audio Files/Audio Recording” not found!" message which has already been reported as a bug although, for me, it's a new problem and seems to be related to the other problem.
The only changes I have made in my system recently was to add a couple of new PowerCore plugs - the CL1B compressor and the Transient Modulator - which were both working fine until this. They still work fine on already recorded tracks.
I have reinstalled Logic, reset hardware, unplugged / plugged everything back in / ran Combo install for 10.4.11 / upgraded to FWAudio 2.2.0, reinstalled Ensemble, updated software, etc.,
I am stuck. Any suggestions???
Thanks In Advance

You're welcome. But I am afraid this is over my head - maybe you should contact Chris Lawson from Apogee - he posts here when there are questions concerning their stuff. and this seems hardware related to me. Maybe repost your question and use the word Apogee in your topic title, that'll get his attention...

When open the article "Inside abandoned airports" on the BBC homepage it initially opens and the immediately switches to an error site. Why?

The current BBC homepage has an article "Inside abandoned airports" which, when I try to open it initially opens and then switches to https://search.yahoo.com/yhs/errorhandler?hspart=gt&hsimp=yhse-gt&q=assets.adobedtm.com%2F5d8d9920c15d663cfa70ef117e3448e4cddcd14f%2Fsat&type=201117. I am currently using Firefox 31.0.
The same article opens without an issue with Internet Explorer 11.0.9600.17239.
It also works with Google Chrome 36.0.1985.143.
What is wrong?

Can you open that article directly?
*http://www.bbc.com/culture/story/20140811-inside-abandoned-airports
You can try these steps in case of issues with web pages:
You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and remove cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Auto correct the inputs received to Initial Capital and other letter small

Similar Messages

Maybe you are looking for