Auto create vs manual TOC

Is there an easy way to change an auto generated TOC to a
manually created one. I'm coming into a project that has the TOC in
alpha order, but I want to change it to be more functional.

Hi writerrh and welcome to our community
As Leon correctly pointed out, you are free to rearrange your
TOC as you like. But I'll also offer the following points that many
seem to be confused about.
* Just because you created a TOC automatically doesn't mean
it's forever an automatically maintained TOC. Many folks have this
mistaken belief. Think of it as a one time shot that instructs
RoboHelp to gather together all the different topics and folders
and create a TOC out of them. Once it's done, that's it. Adding
topics later does not automatically include them in the TOC.
* Some folks believe the TOC absolutely MUST have every topic
referenced. This is seldom the case. You may have tons of topics
that never see the light of day from the TOC.
* Some folks believe deleting a topic from the TOC also
deletes it from the project or causes it not to be included in the
output. This is also a fallacy.
Hopefully this helps a smidge... Rick

Similar Messages

Can't auto-create TOC!

Hi. I'm a noob with RH, and I'm following both our hastily-written internal instructions and the online Help for RH (both of which say basically the same thing in this case). TCS 1.0 on WinXP.
I imported the FM book (right-click > Add FrameMaker File > By Reference). I did a bit of minor tweaking. Then I went to make the TOC. (I did not create it when I first imported the FM files.)
I expanded the Table of Contents item in the Project Manager pod and double-clicked the existing TOC entry (named "<book> (Default)" where <book> is the name of the document). The TOC pod opens.
At this point the Help says to click the "Auto-create TOC icon." I don't have that icon! There's one that looks very similar, but the tooltip says "Insert TOC Placeholder." That opens the "Insert TOC placeholder" dialog that doesn't seem to do anything. (Nothing happens when I click "View." There's nothing listed under "Used in following Table of Contents." And when I click OK it says "Cannot insert into same Table of Contents.")
What the heck is going on? Why can't I create a TOC?

This one should probably go into the Framemaker Integration section - usually you use the TCS to create the index and TOC over in FM and then pull them both into the RH project - that's the whole point to having the TCS. There's a nice conversion settings dialog that appears when you tell the project to go fetch the FM book.
If you've gotten in this far and don't want to start another project, you're left with manually creating TOC entries and linking them to topics. Look for icons in the TOC pod that talk about adding topics or some such (sorry, I don't have my RH open right now). You'll have to browse to find the topic you want in the add new TOC entry.
Hope that helps somewhat,
Jeff

Auto Creating a TOC in RH8 (for FlashHelp) problem

When I opened my RH8 project today and autocreated the TOC, all books disappeared except for the new one I created today. I painstakingly recreated the TOC with 10-12 books and contents, saved frequently, and regenerated the project, displayed it in Flash -- TOC displays OK. However, when I use the Auto Create TOC option (deselecting the Delete Previous TOC checkbox), it creates a one-book TOC (the one book I added today). Something seems to be broken with the auto-create TOC function. Any clues?
Thanks.

Hi there
Awfully hard to say what has happened here without seeing your project first hand. Are you using Folders to organize topics? Is the content purely HTML files or is it content that is linked to a Word document?
Cheers... Rick
Begin learning RoboHelp HTML 7 within the day - $24.95!
Click here for Adobe Certified Captivate and RoboHelp HTML Training
Click here for the SorcerStone Blog
Click here for RoboHelp and Captivate eBooks

Auto Create TOC

I'm using Adobe RoboHelp 9.0.2.271. I'm using the Auto Create TOC feature but my table of contents is created in the manner the topics were added to the system, not alphabetically. According to "help", when I use this feature, it should be created according to the chapter layout defined in the Project Manager (copy / paste below from help).
Automatically create a table of contents based on the chapter layout defined in the Project Manager pod. If you automatically create a table of contents, books and pages are sorted alphabetically.
I have the A-->Z button selected in the Project Manager pod, and when I view the topics there, they are in alphabetical order but the TOC is not created in that manner.
Any ideas?

See Item 28 at http://www.grainge.org/pages/snippets/snippets.htm#miscellaneous
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

IPad Air - photo auto created in gallery issue

Hi everyone!
Not sure if anyone found this issue before, the identical photo has been auto created in gallery (iPad Air 7.1.1) many times. I never took the photo myself. it just looks like it came from the internet but I never saved. I wonder if this is a bug and how should i do to solve the issue. Many thanks in advance !!

It also takes time for the photos to be transferred out of your iPhone and into Photo stream on Apple's iCloud servers.
Note that this can't happen if your iPhone is not connected to a WiFi network:
When you enable My Photo Stream on your devices, all new photos you take or import to those devices will be automatically added to your photo stream.
iOS devices: New photos you take are automatically uploaded to your photo stream when you leave the Camera app and are connected to Wi-Fi. My Photo Stream does not push photos over cellular connections.
Macs: Any new photos you import to iPhoto or Aperture begin uploading automatically when you have a Wi-Fi or Ethernet connection. Or you can change your iPhoto or Aperture preferences so that only photos you manually add to My Photo Stream are uploaded.
PC with iCloud Control Panel 2.0 or later: Open a Windows Explorer window and under Favorites select iCloud Photos if you are using iCloud Control Panel 3.0 (or Photo Stream if you are using 2.0 to 2.1.2). Open My Photo Stream. Click the "Add photos" button. Select the photos to import to My Photo Stream, then click Open.
from here: http://support.apple.com/kb/ht4106

Error in creating DB manually

Hi All,
OS:Solaris
DB:10G
When i am trying to create database manually over putty i am facing the below mantioned error:
SQL> CREATE DATABASE ettest>2 USER SYS IDENTIFIED BY ****
>3 USER SYSTEM IDENTIFIED BY *****
>4 LOGFILE GROUP 1 ('/11g/oradata/admin/data/logfiles/redo01.log') SIZE 50M,
>5 GROUP 2 ('/11g/oradata/admin/data/logfiles/redo02.log') SIZE 50M,
>6 GROUP 3 ('/11g/oradata/admin/data/logfiles/redo03.log') SIZE 50M
>7 MAXLOGFILES 5
>8 MAXLOGMEMBERS 5
>9 MAXLOGHISTORY 1
>10 MAXDATAFILES 100
>11 MAXINSTANCES 1
>12 CHARACTER SET US7ASCII
>NATIONAL CHARACTER SET AL16UTF16
>13 14 DATAFILE '/11g/oradata/admin/data/datafiles/system01.dbf' SIZE 325M REUSE
>15 EXTENT MANAGEMENT LOCAL
>16 sysaux datafile 'D:\oracle\databases\ora10\sysaux.dbf'
>17 size 10M autoextend on next 10M maxsize unlimited
>18 DEFAULT TEMPORARY TABLESPACE tempts1
>19 TEMPFILE '/vobs/oracle/oradata/mynewdb/temp01.dbf'
>20 UNDO TABLESPACE undotbs
>21 DATAFILE '/11g/oradata/admin/data/datafiles/undotbs01.dbf'
>22 SIZE 200M REUSE AUTOEXTEND ON NEXT 5120K MAXSIZE UNLIMITED;
CREATE DATABASE ettest
ERROR at line 1:
ORA-01092: ORACLE instance terminated. Disconnection forcedThis seeems to be a generic error, kinldy help.
Regards,
Sphinx
Edited by: $phinx19 on Oct 28, 2012 8:54 PM

Hi SB,
Well i did try this earlier also, here is the o/p of alert:
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 3
Using LOG_ARCHIVE_DEST_1 parameter default value as /data3/ora10/dbs/arch
Autotune of undo retention is turned on.
IMODE=BR
ILAT =18
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.4.0.
System parameters with non-default values:
processes = 150
control_files = /11g/oradata/admin/data/controlfiles/control01.ctl, /11g/oradata/admin/data/controlfiles/control02.ctl
db_block_size = 8192
compatible = 10.2.0.1.0
undo_management = AUTO
undo_tablespace = undotbs
cursor_sharing = FORCE
background_dump_dest = /11g/oradata/admin/ettest/bdump
user_dump_dest = /11g/oradata/admin/ettest/udump
core_dump_dest = /11g/oradata/admin/ettest/cdump
db_name = ettest
open_cursors = 300
PMON started with pid=2, OS id=16987
PSP0 started with pid=3, OS id=16989
MMAN started with pid=4, OS id=16991
DBW0 started with pid=5, OS id=16993
DBW1 started with pid=6, OS id=16995
LGWR started with pid=7, OS id=16997
CKPT started with pid=8, OS id=16999
SMON started with pid=9, OS id=17001
RECO started with pid=10, OS id=17003
MMON started with pid=11, OS id=17005
MMNL started with pid=12, OS id=17007
^[Mon Oct 29 09:46:14 2012
CREATE DATABASE ettest
   USER SYS IDENTIFIED BY ****USER SYSTEM IDENTIFIED BY ****LOGFILE GROUP 1 ('/11g/oradata/admin/data/logfiles/redo01.log') SIZE 50M,
           GROUP 2 ('/11g/oradata/admin/data/logfiles/redo02.log') SIZE 50M,
           GROUP 3 ('/11g/oradata/admin/data/logfiles/redo03.log') SIZE 50M
   MAXLOGFILES 5
   MAXLOGMEMBERS 5
   MAXLOGHISTORY 1
   MAXDATAFILES 100
   MAXINSTANCES 1
   CHARACTER SET US7ASCII
   NATIONAL CHARACTER SET AL16UTF16
   DATAFILE '/11g/oradata/admin/data/datafiles/system01.dbf' SIZE 325M REUSE
   EXTENT MANAGEMENT LOCAL
   sysaux datafile 'D:\oracle\databases\ora10\sysaux.dbf'
   size 10M autoextend on next 10M maxsize unlimited
   DEFAULT TEMPORARY TABLESPACE tempts1
   TEMPFILE '/vobs/oracle/oradata/mynewdb/temp01.dbf'
   UNDO TABLESPACE undotbs
   DATAFILE '/11g/oradata/admin/data/datafiles/undotbs01.dbf'
      SIZE 200M REUSE AUTOEXTEND ON NEXT 5120K MAXSIZE UNLIMITED
Mon Oct 29 09:46:14 2012
Database mounted in Exclusive Mode
Mon Oct 29 09:46:16 2012
Successful mount of redo thread 1, with mount id 4239425638
Assigning activation ID 4239425638 (0xfcb08066)
Thread 1 opened at log sequence 1
Current log# 1 seq# 1 mem# 0: /11g/oradata/admin/data/logfiles/redo01.log
Successful open of redo thread 1
Mon Oct 29 09:46:16 2012
MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
Mon Oct 29 09:46:16 2012
SMON: enabling cache recovery
Mon Oct 29 09:46:16 2012
create tablespace SYSTEM datafile '/11g/oradata/admin/data/datafiles/system01.dbf' SIZE 325M REUSE
EXTENT MANAGEMENT LOCAL online
Mon Oct 29 09:46:18 2012
Completed: create tablespace SYSTEM datafile '/11g/oradata/admin/data/datafiles/system01.dbf' SIZE 325M REUSE
EXTENT MANAGEMENT LOCAL online
Mon Oct 29 09:46:18 2012
create rollback segment SYSTEM tablespace SYSTEM
storage (initial 50K next 50K)
Completed: create rollback segment SYSTEM tablespace SYSTEM
storage (initial 50K next 50K)
Mon Oct 29 09:46:41 2012
CREATE UNDO TABLESPACE UNDOTBS DATAFILE '/11g/oradata/admin/data/datafiles/undotbs01.dbf'
      SIZE 200M REUSE AUTOEXTEND ON NEXT 5120K MAXSIZE UNLIMITED
Mon Oct 29 09:46:43 2012
Successfully onlined Undo Tablespace 1.
Completed: CREATE UNDO TABLESPACE UNDOTBS DATAFILE '/11g/oradata/admin/data/datafiles/undotbs01.dbf'
      SIZE 200M REUSE AUTOEXTEND ON NEXT 5120K MAXSIZE UNLIMITED
Mon Oct 29 09:46:43 2012
create tablespace SYSAUX datafile 'D:\oracle\databases\ora10\sysaux.dbf'
   size 10M autoextend on next 10M maxsize unlimited
EXTENT MANAGEMENT LOCAL SEGMENT SPACE MANAGEMENT AUTO online
ORA-1119 signalled during: create tablespace SYSAUX datafile 'D:\oracle\databases\ora10\sysaux.dbf'
   size 10M autoextend on next 10M maxsize unlimited
EXTENT MANAGEMENT LOCAL SEGMENT SPACE MANAGEMENT AUTO online
Mon Oct 29 09:46:43 2012
Errors in file /11g/oradata/admin/ettest/udump/ettest_ora_17008.trc:
ORA-00604: error occurred at recursive SQL level 1
ORA-01119: error in creating database file 'D:\oracle\databases\ora10\sysaux.dbf'
ORA-27038: created file already exists
Additional information: 1
Mon Oct 29 09:46:43 2012
Errors in file /11g/oradata/admin/ettest/udump/ettest_ora_17008.trc:
ORA-01501: CREATE DATABASE failed
ORA-01519: error while processing file '?/rdbms/admin/sql.bsq' near line 5801
ORA-00604: error occurred at recursive SQL level 1
ORA-01119: error in creating database file 'D:\oracle\databases\ora10\sysaux.dbf'
ORA-27038: created file already exists
Additional information: 1
Error 1519 happened during db open, shutting down database
USER: terminating instance due to error 1519
Instance terminated by USER, pid = 17008
ORA-1092 signalled during: CREATE DATABASE ettest
   USER SYS IDENTIFIED BY ****USER SYSTEM IDENTIFIED BY ****LOGFILE GROUP 1 ('/11g/oradata/admin/data/logfiles/redo01.log') SIZE 50M,
           GROUP 2 ('/11g/oradata/admin/data/logfiles/redo02.log') SIZE 50M,
           GROUP 3 ('/11g/oradata/admin/data/logfiles/redo03.log') SIZE 50M
   MAXLOGFILES 5
   MAXLOGMEMBERS 5
   MAXLOGHISTORY 1
   MAXDATAFILES 100
   MAXINSTANCES 1
   CHARACTER SET US7ASCII
   NATIONAL CHARACTER SET AL16UTF16
   DATAFILE '/11g/oradata/admin/data/datafiles/system01.dbf' SIZE 325M REUSE
   EXTENT MANAGEMENT LOCAL
   sysaux datafile 'D:\oracle\databases\ora10\sysaux.dbf'
   size 10M autoextend on next 10M maxsize unlimited
   DEFAULT TEMPORARY TABLESPACE tempts1
   TEMPFILE '/vobs/oracle/oradata/mynewdb/temp01.dbf'
   UNDO TABLESPACE undotbs
   DATAFILE '/11g/oradata/admin/data/datafiles/undotbs01.dbf'
      SIZE 200M REUSE AUTOEXTEND ON NEXT 5120K MAXSIZE UNLIMITED...
Regards,
Sphinx

Ability to auto create a primary key column while creating an entity ?

Product : oracle data modeler ( 3.0.0.665 32 bit version ) on windows XP Professional , : Target DB Oracle 11GR2
I am new to Mozilla Rhino. Is it feasible to have a mechanism where in the primary key column name would be auto generated when the entity ( name ) is just created for the first time, and it has no columns defined yet . For e.g. one could create an entity named vendor , and after the table name is typed in, a column vendor identifier,of type numeric , is to be auto created. This mechanism should work even if the entity name changes, and the primary key is in format {tablename}_id , but it should not , if the primary key was manually set in later and is not in the expected format.

I created this script (1) for adding an ID column (using a specific domain) to all supertype entities that do not already have an ID attribute, and a script (2) for adding primary key constraints to all ID attributes.
- Marc de Oliveira
Script 1:
entities = model.getEntitySet().toArray();
domain = model.getDesign().getDomainSet().getByName('Integer DIS Domain');
for (var e = 0; e<entities.length;e++)
entity = entities[e];
if (entity.getHierarchicalParent()==null)
attributes = entity.getAttributes().toArray(); // find existing attributes
IDattribute = null;
for (var a = 0; a<attributes.length; a++) // look for an ID attribute
if (attributes[a].getName()=="ID") { IDattribute = attributes[a]; }
if (IDattribute==null) // if an ID attribute was not found...
IDattribute = entity.createAttribute(); // create a new ID attribute
IDattribute.setName("ID");
IDattribute.setDomain(domain);
entity.moveToIndex(IDattribute,0); // move ID attribute to top
Script 2:
entities = model.getEntitySet().toArray();
for (var e = 0; e<entities.length;e++)
entity = entities[e];
attributes = entity.getAttributes().toArray(); // find existing attributes
IDattribute = null;
for (var a = 0; a<attributes.length; a++) // look for an ID attribute
if (attributes[a].getName()=="ID") { IDattribute = attributes[a];}
if (IDattribute!=null) // if an ID attribute was found...
key = entity.createCandidateKey(); // Create a key
key.add(IDattribute); // Add the ID attribute to the key
key.setPK(true); // Define the key as a primary key
PKName = entity.getName().replace(" ","_")+"_PK";
key.setName(PKName); // Define the key as a primary key
entity.setPK(key); // workaround for bug...
}

Auto Create Doc functionality

Hi Gurus
Need help on AutoCreate Document Program on PO.
The user creates PR in 2 currency i.e. one will be Base and other Foreign Currency. Now to create PO, we make use of Auto create document functionality in which there is an option to change the source type of currency i.e. 3 values namely Default, First Requisition Line and Specify.
Can you please let me know if we can make the option First Requisition Line to default as the value ?
Can we schedule the auto create doc request so that there is no manual intervention?
Thanks

Can you please let me know if we can make the option First Requisition Line to default as the value ?
Don't think so.
Can we schedule the auto create doc request so that there is no manual intervention?
Yes but you need to make sure you have the ASL and SR setup correctly. If you want PO to be approved automatically, make sure you use the correct release method and that the approval hierarchy/limits are set correctly.
Sandeep Gandhi

Auto Create Tracks in Cycle Record in LP8?

I might be alone but used Auto Create Tracks in Cycle Record a lot in Logic 7. I sat down today to down some work and cant find the equivalent in LP 8 any where.
I use this to play a record a track then record again whilst listening to the original. Sometimes this will end up being as many as 8 tracks playing at the same time whilst another is being recorded.
Can this be done in LP8?
Sorry if this info is else where I have just spent a few hrs looking through the manual and this forum
My best
Joff

Why do you post this twice, you won't get different answers by posting it again......

Hibernate hbm2ddl.auto create-drop doesn't seem to work in 10.3 JPA

Greetings,
I'm migrating an JPA application from JBoss 5.0 to WebLogic 10.3. In order to simplify the problem, I have the following entity:
package fr.simplex_software.p204.domain;
import java.io.Serializable;
import javax.persistence.*;
@Entity
@Table(name="AUTHOR")
public class Author implements Serializable
private static final long serialVersionUID = 1L;
@Id
@Column(name="AUTHOR_ID", nullable=false)
@GeneratedValue(strategy=GenerationType.AUTO)
private Long id;
public Long getId()
return id;
public void setId(Long id)
this.id = id;
I also have the following persistence.xml file:
<?xml version="1.0" encoding="UTF-8"?>
<persistence version="1.0" xmlns="http://java.sun.com/xml/ns/persistence" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/persistence http://java.sun.com/xml/ns/persistence/persistence_1_0.xsd">
<persistence-unit name="p204-ejbPU" transaction-type="JTA">
<provider>org.hibernate.ejb.HibernatePersistence</provider>
<jta-data-source>java:/jdbc/TestDS</jta-data-source>
<exclude-unlisted-classes>false</exclude-unlisted-classes>
<properties>
<property name="hibernate.hbm2ddl.auto" value="create-drop"/>
</properties>
</persistence-unit>
</persistence>
When I deploy the application in JBoss 5.0, the table AUTHOR is created. When I deploy the same in WebLogic 10.3, the table isn't created and nothing happens. Should I do anything of special ?
Many thanks in advance for any help.
Kind regards,
Nicolas

Hi Matt, thanks for your reply. Yes, I did. Actually I'm testing the JDBC data-source in WebLogic console and the test is successfull. Also, exactly the same app correctly deploys in JBoss. In the WebLogic console I can see my EAR deployed, I'm running some standalone clients against some SLSB in the EAR and they work properly and I'm sure that if I'm manually creating the data-model, the JPA entities will work. The only thing which doesn't seem to work is the automatically data-model creation. I thought that Hibernate may not be so intimatelly integrated with WebLogic as with JBoss and I tried to use Kodo, but I didn't find any auto create-drop equivalent feature. I continue digging but stiil interested by any suggestion, if any.
Many thanks in advance,
Nicolas

How to auto create a global variable with specific variable name in a global vi ?

how to auto create a global variable with specific variable name in a global vi using lv ? Because i need to add a lot of global variable in this global vi. But you know, if i manually add them , it will be a much time-costing work. So i want to use someway to auto generate ? Can i ?? Thanks a lot !

Hi
what aartjan is saying is the way for you. but you can develop an utility which will actually help you create global variables. To get the details on this just have a look at VI Scripting section on LAVA forum.
But i would like you to suggest few things
1. If your programs have so many global variables (Thats why u want utility) then you should take out some time to read about LabVIEW design patterns. I think if programmer follows these practicess he dont need a single global variable.
2. Their are some other ways to achieve similar functionality as of global variables (Uninitialized Shift Registers, Single Element Qs and so on) but they are much faster than global variables.
I am Attaching Whatever Resources i am having I will also attach the template of the design pattern i generaly use in short duration
Message Edited by Tushar Jambhekar on 10-06-2005 07:33 PM
Message Edited by Tushar Jambhekar on 10-06-2005 07:36 PM
Tushar Jambhekar
[email protected]
Jambhekar Automation Solutions
LabVIEW Consultancy, LabVIEW Training
Rent a LabVIEW Developer, My Blog
Attachments:
LabVIEWDesignPatterns.zip ‏1505 KB
Large_Code_Implementation.zip ‏522 KB
Database Tests.zip ‏868 KB

Switching forn AUTO undo_management to MANUAL

hi,
1) after AUTO undo_management installation, i will use RBS MANUAL. But when i set the undo_management to MANUAL the database don't start.
What's problem?
2)Where will us use the AUTO or the MANUAL method?
Regards.
Tark.

Hi
You are right... I did a test... here the statement that I used for the switch:
connect / as sysdba
alter system set undo_management = manual scope = spfile;
shutdown
startup
create public rollback segment rbs0 tablespace system;
shutdown
startup
create tablespace rbs datafile '/tmp/rbs.dbf' size 10m;
create public rollback segment rbs1 tablespace rbs;
create public rollback segment rbs2 tablespace rbs;
create public rollback segment rbs3 tablespace rbs;
create public rollback segment rbs4 tablespace rbs;
alter rollback segment rbs1 online;
alter rollback segment rbs2 online;
alter rollback segment rbs3 online;
alter rollback segment rbs4 online;
alter rollback segment rbs0 offline;
Chris

PO CNV: Auto-Create POs from PUR Reqs generated by OM

Objective: Convert open sales orders and maintain the link to the purchase order for back to back and drop shipment sales orders?
Question: Is it possible to convert the sales orders first. Then run requisition import to create the purchase requisitions in the PO module. After the requisition lines are created, convert the purchase orders through the open interface table or an API by auto-creating the PO from the requisition lines? This would maintain the link between purchasing and order management.
If this is not possible, does anyone have any suggestions? Someone mentioned using BPAs (this assumes I can assign items to specific suppliers).
Any ideas are greatly appreciated.
Thanks

Hi,
After creating a PR, why you want to go thru open interface.
There is a standard functionality : AUTOCREATE, available , which will convert the PR to PO.
On PO Shipment level, you can view the SO number & Line Number also.
Please review the below link.
Oracle Applications - Functional: Business Flow of Drop Ship Order

Auto-create delivery for multiple sales orders

I would like to ask how to create auto-create 'single' delivery
for multiple sales order during release sales order in R11i.
It is found in my example during release sales order, multiple
sales orders fulfill release sales order criteria, a single pick
slip is generated but it is found that each sales order have
individual delivery with it. It will casue multiple pack slips
for a singles pick slip. Is it normal feature for auto-create
delivery, or any setup to solve it?
Thanks in advance.

Am not able to do Single Delivery for Muktiple sales orders
Have you searched the forum for this question as to why you were not able to generate ?? It could be due to multiple reasons. Please search the forum and update here what steps you have taken after taking the inputs from here, if the problem is still not resolved.
thanks
G. Lakshmipathi

Creating a manual tabular form on an empty table

Hi all,
I am trying to create a manual tabular form on an empty table. Is it possible to display textboxes and column headers, when I run the report I get "no data found".
Regards,

Hi Denes and thank you for your valuable input.
My problem is in fact that, I have created the tabular form by using a report region with a SQL query, something like,
select apex_item.display_and_save(1, p.bolge) bolge,
apex_item.display_and_save(2, p.hafta) hafta,
apex_item.display_and_save(3, p.yil) yil,
apex_item.display_and_save(4, p.mamul) mamul,
apex_item.display_and_save(5, p.tahmin1) tahmin1,
apex_item.display_and_save(6, p.tahmin2) tahmin2,
apex_item.display_and_save(7, p.tahmin3) tahmin3,
apex_item.display_and_save(8, p.tahmin4) tahmin4,
apex_item.display_and_save(9, p.tahmin5) tahmin5,
apex_item.display_and_save(10, p.tahmin6) tahmin6,
apex_item.display_and_save(11, p.revize4) revize4,
apex_item.display_and_save(12, p.revize5) revize5,
apex_item.display_and_save(13, p.revize6) revize6
from portal_link.v_planlama p
The problem is that, since there is no data in the table, when I run the page, I cant get the form to be rendered, and I get a nice "no data found". There should be a way to get the form rendered, hence making it available for data input.
Regards,
Onur

Auto create vs manual TOC

Similar Messages

Maybe you are looking for