Auto Datababase Export Problem - On lunix Through Oracle Database Sheduler

All Expert,
I am new in Linux, at windows i am running oracle database 10.2.0 and auto shudule data export job for every day at morning and evening time
I create export.bat file which invoke oracle data export utility exp.exe such as
exp.exe userid=system/pass file= d:\backup\date.dmp , log=d:\backup\date.log.
How i can create export.bat alternative for linux plateform (redhat 4.7)
How i can creat dump..zip file on linux redhat4.7
How I can access linux folder /oradisk/backup from windows operting system.
How i can access linux drives on windows operting system.
Thanks in Advance
Edited by: Naeem Sheeraz on Apr 13, 2009 5:54 PM

Naeem Sheeraz wrote:
All Expert,
I am new in Linux, at windows i am running oracle database 10.2.0 and auto shudule data export job for every day at morning and evening time
I create export.bat file which invoke oracle data export utility exp.exe such as
exp.exe userid=system/pass file= d:\backup\date.dmp , log=d:\backup\date.log.
How i can create export.bat alternative for linux plateform (redhat 4.7) 'exp' in oracle linux is equivalent to 'exp.exe' in windows +(but for both you should normally be using datadump expdp)+
userid is best placed in a .par file for security reasons. .... having password on command line is not good.
How i can creat dump..zip file on linux redhat4.7zip dump unzipedfile
man zip tells you more.
How I can access linux folder /oradisk/backup from windows operting system.samba, ftp, sftp ...
How i can access linux drives on windows operting system.
samba, ftp, sftp....
In general for occasional use a client such as coreftp is useful (check licensing); filezilla is also possible.
Setting up the linux to share folder using samba is perhaps a longer term solution but requires more expertise to set up and requires managment. Poor setups could compromise security.
Could also be done via apache web server, again one step away from compromised security.
Thanks in Advance
Edited by: Naeem Sheeraz on Apr 13, 2009 5:54 PMYou should best probally seek some linux fundamentals training
Best Regards - bigdelboy.
Edited by: bigdelboy on 13-Apr-2009 10:35 (didnt realised tommy had answered this better already)

Similar Messages

Problem with Java and Oracle Database - help !

i keep getting a NullPointerException when trying to
update a resultSet in a servlet. i am bringing in the data
just fine from an Oracle database. but it chokes when trying
to update it. can anybody tell me what is happening?
thanks for any help
Owen
ResultSet rs = stmt.executeQuery( "select * from sw_assets" );
rs.next();
rs.updateString("name","XXX"); <--- BOOM !
java.lang.NullPointerException
at sun.jdbc.odbc.JdbcOdbcBoundCol.setRowValues(JdbcOdbcBoundCol.java:240)
at sun.jdbc.odbc.JdbcOdbcResultSet.updateChar(JdbcOdbcResultSet.java:3767)
at sun.jdbc.odbc.JdbcOdbcResultSet.updateString(JdbcOdbcResultSet.java:3257)
at sun.jdbc.odbc.JdbcOdbcResultSet.updateString(JdbcOdbcResultSet.java:3848)
at _0002fopen_0002ejspopen_jsp_3._jspService(_0002fopen_0002ejspopen_jsp_3.java:87)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:119)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at org.apache.jasper.servlet.JspServlet$JspServletWrapper.service(JspServlet.java:177)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:318)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:391)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at org.apache.tomcat.core.ServletWrapper.doService(ServletWrapper.java:404)
at org.apache.tomcat.core.Handler.service(Handler.java:286)
at org.apache.tomcat.core.ServletWrapper.service(ServletWrapper.java:372)
at org.apache.tomcat.core.ContextManager.internalService(ContextManager.java:797)
at org.apache.tomcat.core.ContextManager.service(ContextManager.java:743)
at org.apache.tomcat.service.http.HttpConnectionHandler.processConnection(HttpConnectionHandler.java:210)
at org.apache.tomcat.service.TcpWorkerThread.runIt(PoolTcpEndpoint.java:416)
at org.apache.tomcat.util.ThreadPool$ControlRunnable.run(ThreadPool.java:498)
at java.lang.Thread.run(Thread.java:484)

ResultSets based on a wildcard are generally treated as views by Oracle, meaning they are not updatable no matter how you create your statement. Try either "select swa.* from sw_assets swa" or "select all from sw_assets swa", that should get around the problem.
Also (just being thorough) make sure that you specifically created your statement as being updatable (stmt = conn.createStatement(ResultSet.TYPE_SCROLL_INSENSITIVE, ResultSet.CONCUR_UPDATABLE) ).
I would not normally expect a NullPointerException when encountering this "feature", but then I don't often use the ODBC bridge.
Good luck! I hope this helps.

How to export an XML file from oracle database?

plz help me its urgent requirement....could u pls tell me the step by step procedure for following questions...?how to export a data as an XML file from oracle database?
thanks in advance,
Bala.
Edited by: user3523292 on Nov 14, 2008 5:43 AM

user3523292 wrote:
plz help me its urgent requirement....could u pls tell me the step by step procedure for following questions...?how to export a data as an XML file from oracle database?
thanks in advance,
Bala.
Edited by: user3523292 on Nov 14, 2008 5:43 AMThis is a forum of volunteers. There is no "urgent" here. Nevertheless, a google search of 'xml oracle export' quickly lead me to this Oracle site:
otn.oracle.com/sample_code/tech/xml/index.html
I also see lots of hits when I search the documentation library at tahiti.oracle.com for 'xml'. This one in particular may be what you are looking for:
http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14252/adx_j_xsu.htm#ADXDK070

Export an XML file from oracle database

plz help me its urgent requirement....could u pls tell me the step by step procedure for following questions...?how to export a data as an XML file from oracle database? is it possible..?
thanks in advance,
Bala. is it possible?
Edited by: user3523292 on Nov 14, 2008 5:45 AM

Here's the quick and dirty method using SQL*Plus...
SQL> select * from emp where deptno = 10;
     EMPNO ENAME      JOB              MGR HIREDATE         SAL       COMM     DEPTNO
      7782 CLARK      MANAGER         7839 09-JUN-81       2450                    10
      7839 KING       PRESIDENT            17-NOV-81       5000                    10
      7934 MILLER     CLERK           7782 23-JAN-82       1300                    10
SQL> set markup html on
SQL> select * from emp where deptno = 10;
<br>
<p>
<table border='1' width='90%' align='center' summary='Script output'>
<tr>
<th scope="col">
EMPNO
</th>
<th scope="col">
ENAME
</th>
<th scope="col">
JOB
</th>
<th scope="col">
MGR
</th>
<th scope="col">
HIREDATE
</th>
<th scope="col">
SAL
</th>
<th scope="col">
COMM
</th>
<th scope="col">
DEPTNO
</th>
</tr>
<tr>
<td align="right">
      7782
</td>
<td>
CLARK
</td>
<td>
MANAGER
</td>
<td align="right">
      7839
</td>
<td>
09-JUN-81
</td>
<td align="right">
      2450
</td>
<td align="right">
</td>
<td align="right">
        10
</td>
</tr>
<tr>
<td align="right">
      7839
</td>
<td>
KING
</td>
<td>
PRESIDENT
</td>
<td align="right">
</td>
<td>
17-NOV-81
</td>
<td align="right">
      5000
</td>
<td align="right">
</td>
<td align="right">
        10
</td>
</tr>
<tr>
<td align="right">
      7934
</td>
<td>
MILLER
</td>
<td>
CLERK
</td>
<td align="right">
      7782
</td>
<td>
23-JAN-82
</td>
<td align="right">
      1300
</td>
<td align="right">
</td>
<td align="right">
        10
</td>
</tr>
</table>
<p>
SQL>which you can spool to a file.

Problem connect form6i and Oracle Database 10g

I can't connect form6i to Oracle Database 10g
When complete user/password@database fatal error produce:
"Oracle Forms Designer has encountered a problem and needs to close. We are sorry for the inconvenience"
Error Detail:
AppName: ifbld60.exe AppVer: 6.0.8.27 ModName: ora805.dll
ModVer: 0.0.0.0 Offset: 000b4f04
Product Install:
- Forms Version: Forms [32 bits] Versión 6.0.8.27.0
- Oracle Database: 10.2.0
- Win XP professional with SP2.
Any idea what might cause Forms to shutdown ubnormally?
Thanks

If your database is using the AL32UTF8 character set, Forms 6i cannot connect.
Read this thread:
connecting form 6i to oracle database 10G express edition

Problems accessing tables in oracle database with ejb entity bean

I have created a simple server application that uses an entity bean (version 2.0) for an existing table in oracle database, and a session bean that is used as an outside interface for performing operations on that table.
after deploying the server and client application the client attempts to perform an operation with the session bean remote interface it obtained.
The session bean uses a locale interface to communicate with the entity bean, but when it tries to use its methods (create, findByXXX) it always get the following Exception: java.sql.SQLException: ORA-00942: table or view does not exist.
the table of course exists, and the username password I'm using has all the permissions needed for this table.
note - I'm using the Forte enterprise edition 4.0 as developer tool.
I'll be glad to get some help.
Here is the full stack trace of the exception:
javax.ejb.TransactionRolledbackLocalException: Exception thrown from bean; nested exception is: javax.ejb.EJBException: nested exception is: java.sql.SQLException: ORA-00942: table or view does not exist
javax.ejb.EJBException: nested exception is: java.sql.SQLException: ORA-00942: table or view does not exist
java.sql.SQLException: ORA-00942: table or view does not exist
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:168)
at oracle.jdbc.ttc7.TTIoer.processError(TTIoer.java:208)
at oracle.jdbc.ttc7.Oall7.receive(Oall7.java:543)
at oracle.jdbc.ttc7.TTC7Protocol.doOall7(TTC7Protocol.java:1405)
at oracle.jdbc.ttc7.TTC7Protocol.parseExecuteDescribe(TTC7Protocol.java:643)
at oracle.jdbc.driver.OracleStatement.doExecuteQuery(OracleStatement.java:1674)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1870)
at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:363)
at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:314)
at com.sun.ejb.persistence.SQLEngine.ejb20Finder(SQLEngine.java:226)
at com.sun.ejb.persistence.PartitionImpl.ejbFinder(PartitionImpl.java:736)
at com.cti2.telco.core.ejb.entity.userInfo.UserInfoEJB_PM.ejbFindByEmail(UserInfoEJB_PM.java:393)
at com.cti2.telco.core.ejb.entity.userInfo.UserInfoEJB_PM_LocalHomeImpl.findByEmail(UserInfoEJB_PM_LocalHomeImpl.java:64)
at com.cti2.telco.core.ejb.UserManagerEJB.authenticate(UserManagerEJB.java:77)
at com.cti2.telco.core.ejb.UserManagerEJB.authenticate(UserManagerEJB.java:68)
at com.cti2.telco.core.ejb.UserManagerEJB_EJBLocalObjectImpl.authenticate(UserManagerEJB_EJB
LocalObjectImpl.java:63)
at com.cti2.telco.core.ejb.dispatch.TelcoFacadeEJB.userLogin(TelcoFacadeEJB.java:80)
at com.cti2.telco.core.ejb.dispatch.TelcoFacadeEJB_EJBObjectImpl.userLogin(TelcoFacadeEJB_EJBObjectImpl.java:24)
at com.cti2.telco.core.ejb.dispatch._TelcoFacadeEJB_EJBObjectImpl_Tie._invoke(Unknown Source)
at com.sun.corba.ee.internal.POA.GenericPOAServerSC.dispatchToServant(GenericPOAServerSC.java:519)
at com.sun.corba.ee.internal.POA.GenericPOAServerSC.internalDispatch(GenericPOAServerSC.java:204)
at com.sun.corba.ee.internal.POA.GenericPOAServerSC.dispatch(GenericPOAServerSC.java:112)
at com.sun.corba.ee.internal.iiop.ORB.process(ORB.java:273)
at com.sun.corba.ee.internal.iiop.RequestProcessor.process(RequestProcessor.java:84)
at com.sun.corba.ee.internal.orbutil.ThreadPool$PooledThread.run(ThreadPool.java:99)
...

Well it seems like the problems has a simple explanation. The Forte assigns a default table name (<entityName>EJBTable) when creating an entity bean from an existsing table in DB (which is not the same as the one it was created from !!!). Also, for reason unknown, when you deploy these entity beans, it doesn't even create the new table under its new name (even if instructed to).
So using the Forte we managed to use successfuly only entity beans that were created "from scretch" (when deployed their tables are created).
Does anyone know how to change the default name the Forte uses, and make it work properly with entity beans created from an existsing table (without going over the xml's) ?

Problems with connection with Oracle Database (Dreamweaver)

I'm trying to create a connection with a oracle database, with JDBC.
In order to do that, I've downloaded the classes12.zip driver in my machine. This is the driver from Oracle.
I've put this file into directory c:\Program Files\Macromedia\Dreamweaver MX\Configuration\JDBCDrivers.
So, I've gone to Window -> Application -> Databases menu into Dreamweaver MX, clicked in the plus (+) signal and choosed Oracle thin Driver (Oracle).
I've filled thin window with the following values:
Connection name: conn1
Driver: oracle.jdbc.driver.OracleDriver
URL: jdbc:oracle:thin:@machinename:1521:SID
Username: ....
Password: ...
When I click in the Test button into this window, the following success message appears:
Connection was made successfully!
But when I go to Bindings window to build a Recordset, the connection doesn't get the tables, and the following error message appears:
Unable to retrieve tables from this connection, click on 'Define...' button to test this connection.
Does somebody know the answer for this problem?
Thank you.

Don't bother with a loopback adapter unless you are using a laptop that needs Oracle to work whether connected or unconnected to the business network. Much simpler to just arrange for DHCP to assign you a fixed IP address (a lease reservation).
It's the change of IP address which trips Oracle up, not the existence of DHCP. So if you can make sure your IP address will be the same, no matter how you acquire it, that's all you have to do.
Installing a loopback adapter which isn't the primary interface at the point you install Oracle will mean your installation will get very confused as to whether to address things via the 127... address or the "normal" IP address. And yes, at that point, you'll not be able to connect to instances, or run listeners or do all sorts of other things reliably.
If it were me, I'd uninstall the mess you probably now have as far as Oracle goes, install something like VirtualBox (free) or VMware Workstation (costs) and enjoy your Oracle experience inside the confines of a virtual machine whose networking setup you can configure and control to your heart's content, without it screwing up your real machine's ability to connect to your work's network when it needs to.

Auto Increment ID Field Table in the Oracle Database (insert new record)

I have been using the MySQL. And the ID field of the database table is AUTO INCREMENT. When I insert a new record into a database table, I can have a statement like:
   public void createThread( String receiver, String sender, String title,
                             String lastPostMemberName, String threadTopic,
                             String threadBody, Timestamp threadCreationDate,
                             Timestamp threadLastPostDate, int threadType,
                             int threadOption, int threadStatus, int threadViewCount,
                             int threadReplyCount, int threadDuration )
                             throws MessageDAOSysExceptionand I do not have to put the ID variable in the above method. The table will give the new record an ID number that is equivalent to the ID number of the last record plus one automatically.
Now, I am inserting a new record into an Oracle database table. I am told that I cannot do what I am used to doing with the MySQL database.
How do I revise the createThread method while I have no idea about what the next sequence number shall be?

I am still very confused; in particular, the Java part. Let me try again.
// This part is for the database table creation
-- Component primary key sequence
CREATE SEQUENCE dhsinfo_page_content_seq
    START WITH 0;
-- Trigger for updating the Component primary key
CREATE OR REPLACE TRIGGER DHSInfoPageContent_INSERT_TRIGGER
    BEFORE INSERT ON DHSInfoPageContent //DHSInfoPageContent is the table name
    FOR EACH ROW WHEN (new.ID IS NULL) // ID is the column name for auto increment
    BEGIN
        SELECT dhsinfo_page_content_seq.Nextval
        INTO :ID
        FROM DUAL;
    END;/I am uncertain what to do with my Java code. (I have been working with the MySQL. Changing to the Oracle makes me very confused.
   public void updateContent( int groupID, String pageName, int componentID,
                              String content, Timestamp contentCreationDate )
                               throws contentDAOSysException
   // The above Java statement does not have a value to insert into the ID column
   // in the DHSInfoPageContent table
      Connection conn = null;
      PreparedStatement stmt = null;
      // what to do with the INSERT INTO below. Note the paramether ID.
      String insertSQL = "INSERT INTO DHSInfoPageContent( ID, GroupID, Name, ComponentID, Content, CreationDate ) VALUES (?, ?, ?, ?, ?, ?)";
      try
         conn = DBConnection.getDBConnection();
         stmt = conn.prepareStatement( insertSQL );
         stmt.setInt( 1, id ); // Is this Java statement redundant?
         stmt.setInt( 2, groupID );
         stmt.setString( 3, pageName );
         stmt.setInt( 4, componentID );
         stmt.setString( 5, content );
         stmt.setTimestamp( 6, contentCreationDate );
         stmt.executeUpdate();
       catch
       finally

Problem Connect forms6i to Oracle Database 10g

Hi, I have a trouble connecting Forms6i ( Patch 15) to oracle Database 10g, the forms crash when trying to connect to database some hints for this trouble.
Best Regards
Abarra

Joel,
My problem is that forms6i crash and Don't give me any information, i think the problem i SQLNET 8.0.6, because i have trouble with sqlplus, query builder,etc. all products of the forms6i CD.
Is posible to user forms6i with another version of SQLNET ?

Problem reading data from oracle database 11g using OleDbDataReader

Hi everyone I work with Visual Studio 2010 and C# programming language. I have a problem reading data from the oracle database. I created a WPF application with my main Window Xaml and class files and 1 more class called DataFiles. The thing I want is to read some data from the database on my grid in my WPF window. Problem is even though it connects to the database the grid is always empty. It isn't the connection string as I tested it and it connects to the database the problem seems to be in showing the LASTNAME (PREZIME in my native tongue) on the grid which is what it's supposed to do.
Here is the code:
Data Files Code
using System;
using System.Collections.ObjectModel;
using System.Data.SqlClient;
using System.Data.OleDb;
namespace SQLKonekcija
    public class clsEmployee
        public string Prezime { get; set; }
    public class DataAccess
        OleDbConnection oleCon;
        OleDbCommand oleComd;
        public DataAccess()
            string connectionString = "provider=ORAOLEDB.ORACLE; data source=ORCL; password=****; user id=****;";
            oleCon = new OleDbConnection(connectionString);
        public ObservableCollection<clsEmployee> GetAllEmployee()
            ObservableCollection<clsEmployee> EmpCol = new ObservableCollection<clsEmployee>();
            oleComd = new OleDbCommand();
            oleComd.Connection = oleCon;
            oleComd.CommandText = "Select PREZIME from UPOSLENICI";
            oleCon.Open();
            OleDbDataReader Reader = oleComd.ExecuteReader();
            Reader.Read();
            while (Reader.Read())
                EmpCol.Add(new clsEmployee()
                    Prezime = Reader["PREZIME"].ToString()
            oleCon.Close();
            return EmpCol;
        }And here is my main window.cs code
public partial class MainWindow : Window
        clsEmployee objEmpToAdd;
        DataAccess objDs;
        public MainWindow()
            InitializeComponent();
        private void Window_Loaded(object sender, RoutedEventArgs e)
            objDs = new DataAccess();
            dgEmp.ItemsSource = objDs.GetAllEmployee();And the XAML
<Window x:Class="SQLKonekcija.MainWindow"
        xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
        xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
        Title="MainWindow" Height="350" Width="525" Loaded="Window_Loaded">
    <Grid>
        <DataGrid AutoGenerateColumns="False" Height="237"
                  HorizontalAlignment="Left" Margin="18,66,0,0" Name="dgEmp"
                  VerticalAlignment="Top" Width="466" ColumnWidth="*"
                   >
            <DataGrid.Columns>
                <DataGridTextColumn Binding="{Binding PREZIME}" Header="Prezime"></DataGridTextColumn>
            </DataGrid.Columns>
        </DataGrid>
        <TextBlock Height="42" HorizontalAlignment="Left" Margin="18,15,0,0" Name="textBlock1" Text="TEST CONNECTION" VerticalAlignment="Top" Width="462" TextAlignment="Center" FontSize="28" FontWeight="ExtraBold" />
    </Grid>
</Window>
The guys on the MSDN forums told me I should ask the question here so sorry if it's not your field.
Hope u guys can help, thanks.

I tried it, commented out the reader.read and have the following connection string
string connectionString = "provider=ORAOLEDB.ORACLE; data source=ORCL; password=****; user id=****; OLEDB.NET=True"
Unfortunately the result is the same.
Edited by: Dino2dy on Nov 24, 2011 12:53 AM

Problem with httpd and oracle database

hi
i have oracle linux with oracle database 11gR2
i install php with oci as the following link :
http://oss.oracle.com/projects/php/dist/documentation/installation.html
but when i try phpinfo() i found just only
*" /etc/php.d/oci8.ini"* in the result
and when i test connection i have this error
*" Fatal error: Call to undefined function oci_connect() "*
so what is the best way to install oci on oracle linux ?

What version of the OS are you using? Any clues in the syslog and httpd log? Are you using SELinux, which is often an overlooked issue?
Can you provide more details?
so what is the best way to install oci on oracle linux ?According to the instructions, if support is needed: http://www.oracle.com/technetwork/topics/php/zend-server-096314.html

Problem in connecting Non Oracle Database from Oracle

Hi:
I want to access "MS ACCESS" from Oracle 10g (10.2.0.1) using Windows XP.
I tried my best, applied all proper instructions I found from books and from Internet, but getting an error.
Here is what I did:
My Oracle database is called "ORCL" and "MS ACCESS" is called "access_1".
There is only one table "Employees" in "access_1".
1. Accessed ODBC from Start | Control Panel | Administrative Tools.
2. Clicked on Users DSN | "access_1" | Add.
3. Clicked on "Drive do Microsoft Access (*.MDB)" .
4. Hit Finish.
5. Entered at DATA SOURCE NAME "ODBC1" and at DESCRIPTION "Connect Oracle to MS Access". Also I clicked on SELECT and chose the "Access_1.mdb" which is located at "C:\Documents and Settings\Muhammad\My Documents" folder. Clicked OK. and clicked on OK again.
6. Now I went to Oracle side and configured listener as follows: (Only portion is shown here)
# listener.ora Network Configuration File: C:\oracle\product\orcl\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oracle\product\orcl)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = hsodbc)
(ORACLE_HOME = C:\oracle\product\orcl)
(PROGRAM = hsodbc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = RIYAZDESKTOP)(PORT = 1521))
7. Configuring the hs file located at C:\oracle\Product\Orcl\hs|admin as follows:
# HS init parameters
# HS_FDS_CONNECT_INFO = <odbc data_source_name>
# HS_FDS_TRACE_LEVEL = <trace_level>
HS_FDS_CONNECT_INFO = odbc1
HS_FDS_TRACE_LEVEL = OFF
# Environment variables required for the non-Oracle system
#set <envvar>=<value>
8. The TNSNAMES.ORA File is located at C:\:\oracle\product\orcl\network\admin\ and has the following text (only the related text is shown here):
# tnsnames.ora Network Configuration File: C:\oracle\product\orcl\network\admin\tnsnames.ora
# Generated by Oracle configuration tools
access_db.world =
(DESCRIPTION =
(Address = (PROTOCOL = TCP) (HOST = RIYAZDESKTOP) (PORT = 1521))
(CONNECT_DATA = (SID = hsodbc))
(HS=OK)
9. The database link is created as follows:
SQL> create database link access_db USING 'access_db.world';
Database link created.
SQL>
10. Now the test and selection:
SQL> select * from employees@access_db;
select * from employees@access_db
ERROR at line 1:
ORA-28545: error diagnosed by Net8 when connecting to an agent
Unable to retrieve text of NETWORK/NCR message 65535
ORA-02063: preceding 2 lines from ACCESS_DB
OH! I HAVE TO RELOAD THE LISTENER AND I DID IT HERE.
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\oracle\product\orcl\BIN>lsnrctl reload
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 17-NOV-2006 17:51:26
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
The command completed successfully
C:\oracle\product\orcl\BIN>
SQL> select table_name from all_tables@access_db;
select table_name from all_tables@access_db
ERROR at line 1:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Generic Connectivity Using ODBC][Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified (SQL State: IM002; SQL Code: 0)
ORA-02063: preceding 2 lines from ACCESS_DB
I HAVE DONE IT EXACTLY WHAT YOU PROVIDED ME BUT GOT THE SAME RESULT.
ANY SOLUTION!
THANKS.

see Connect 9i to Microsoft Access Database

Emailing through oracle database

I am using oracle database 8i ,application server 9i.
What software/infrastructure I needed to send email to my consumers
in database regarding their electricity Bill.
Is it oracle email server?

Which point release of 8i? UTL_SMTPwas introduced in 8.1.6. This will allow you to send e-mail via PL/SQL.
You need an SMTP server somewhere on the network that is visible to the database server; if you don't know the url of this server you will have to ask your network administrator. However, if you're lucky you should find that 127.0.0.1 (localhost) does the trick.
Cheers, APC

Driver problem to connect the oracle database

sir
i want to use oracle 8.0 database at the backend in my project
i want that it is platform indpendent but
so i access that it is achive when i am not use the odbc driver
In xp the oracle not connect with my application
and in win98 some time it is connected to the application by
the odbc driver.
can it is possible that i use oracle database with out use of ODBC bridge in all Microsoft opertaing system types that is win 98,2000,XP
and NT
if yes how please help me and where i found the driver for oracle
with no price.
also how can i made the connection with my application.
thanks in advance

First:
post this in the approriate forum. This is for Swing questions, not for database driver questions. You have more luck in the JDBC forum, but still this isn't really a Java/JDBC question.
Second:
try to use the search before posting a question. Questions regarding the ODBC bridge are posted about 5 times a day (in the JDBC forum)!
Third:
to answer your question: download the Type 4 JDBC driver from otn.oracle.com. You can use it with every JDK on every platform.

Problem inserting Blob through Oracle 9iAs

Hai Everybody,
I got a unique problem , i am trying to insert a blob object to the blob column. This is working fine when i am using JDeveloper 9.0.3 , but when i am using the same on 9iAS , the data is not evening inserting to the database. Please can any body help me how to solve this problem.
This is the code used to insert into the database.
if (resSet.next()) {
oracle.sql.BLOB bCol = ((OracleResultSet)resSet).getBLOB(1);
blobOutputStream = bCol.getBinaryOutputStream();
byte[] bBuffer = new byte[bCol.getBufferSize()];
int intBytesRead = 0;
ByteArrayInputStream fis = new ByteArrayInputStream(byteValues);
ErrorLog.log(" before the while loop ");
while ((intBytesRead = fis.read(bBuffer)) != -1) {
blobOutputStream.write(bBuffer,0,intBytesRead);
blobOutputStream.close();
// i am commiting the connection here
conn.commit();
conn.setAutoCommit(true);

Hi !, you can find response of this answer in Oracle forums...
http://forums.oracle.com/forums/forum.jsp?forum=99

Auto Datababase Export Problem - On lunix Through Oracle Database Sheduler

Similar Messages

Maybe you are looking for