Auto-deployment/update on Managed Servers

Why is it that even though I am running my managed servers in development mode,
it won't auto-update/redeploy my web-apps? I don't know why this is happenning.
If anyone knows a solution for this, I would really appreciate your input. Thanks.

I don't think hot-deployment is supported on mananged servers.
"Kumar Allamraju" <[email protected]> wrote in message news:[email protected]..
is this happening in 60 or 61?
Marco Ingco wrote:
Why is it that even though I am running my managed servers in development mode,
it won't auto-update/redeploy my web-apps? I don't know why this is happenning.
If anyone knows a solution for this, I would really appreciate your input. Thanks.
[att1.html]

Similar Messages

  • Deployment failed: No managed servers to service request: how to recover

    I am unable to deploy applications, instead get error:
    2013-05-14 05:27:53 CDT: Starting action "Deploy Application"
    2013-05-14 05:27:53 CDT: Deploy Application started
    2013-05-14 05:27:53 CDT: Deployment failed: No managed servers to service request
    2013-05-14 05:27:53 CDT: Application deployment failed.
    2013-05-14 05:27:53 CDT: "Deploy Application" complete: status FAILED
    The error occurs both from Jdeveloper and UI deployment. Is there a way to recover from this ? This did work earlier today..

    I am experiencing the same stuck job on my java cloud instance - can Oracle support reset my job
    If I try to start/stop/redeploy or add an application I get the following error
    "Information
      The operation cannot be invoked because the service is running Java Cloud Service Job 170371. Wait for the job to complete, then re-run the operation."
    https://forums.oracle.com/thread/2548962
    https://forums.oracle.com/thread/2501942?tstart=30
    thank you
    /michael

  • Auto-Deployment and Restarting Managed Server

    Hi,
    We are using WebLogic Server 7.0 SP2 on Solaris 8. Yesterday, a developer copied
    over a new WAR file into the applications directory. Then he ried to restart the
    managed server. This appeared to hang, so he tried restarting the admin. server,
    which also failed. Looking at the log, it looks like the admin. server is trying
    to deploy apps. from the applications/backup directory.
    After I removed the backup directory and edited config.xml to remove all references
    to this directory, I was able to startup the Admin. server (though there were
    still some errors; see later) and the managed server.
    The servers are actually running in "developemnt" mode and have the Aut-Deploy
    feature enabled, so my theory is that the auto-deployment was conflicting with
    the managed server restart. He shouldn't have had to restart the managed server
    since Auto-Deploy is enabled, right?
    I'm also wondering about these errors I got when I the Admin. server finally started:
    Starting WebLogic Server...
    <May 4, 2004 11:41:04 AM MDT> <Notice> <Management> <140005> <Loading configuration
    /wlsapp/prod/ivrprod/./config.xml>
    <May 4, 2004 11:41:14 AM MDT> <Notice> <Security> <090082> <Security initializing
    using realm myrealm.>
    <May 4, 2004 11:41:14 AM MDT> <Notice> <WebLogicServer> <000327> <Starting WebLogic
    Admin Server "admin" for domain "ivrprod">
    <May 4, 2004 11:41:44 AM MDT> <Notice> <Application Poller> <149400> <Activating
    application: appsdirbackup_dir>
    <May 4, 2004 11:41:49 AM MDT> <Notice> <Application Poller> <149404> <Activate
    application appsdirbackup_dir on admin - Running>
    <May 4, 2004 11:41:51 AM MDT> <Notice> <Application Poller> <149404> <Activate
    application appsdirbackup_dir on admin - Completed>
    <May 4, 2004 11:41:54 AM MDT> <Notice> <Management> <141052> <Application Poller
    started for development server.>
    <May 4, 2004 11:41:54 AM MDT> <Notice> <Application Poller> <149400> <Activating
    application: appsdirbackup_dir-0>
    <May 4, 2004 11:41:57 AM MDT> <Notice> <Application Poller> <149404> <Activate
    application appsdirbackup_dir-0 on admin - Running>
    <May 4, 2004 11:41:59 AM MDT> <Notice> <Application Poller> <149404> <Activate
    application appsdirbackup_dir-0 on admin - Running>
    <May 4, 2004 11:42:02 AM MDT> <Notice> <WebLogicServer> <000365> <Server state
    changed to RUNNING>
    <May 4, 2004 11:42:02 AM MDT> <Notice> <WebLogicServer> <000360> <Server started
    in RUNNING mode>
    <May 4, 2004 11:42:13 AM MDT> <Error> <HTTP> <101045> <[ServletContext(id=2268781,name=InternetTroubleshooting,context-path=/backup/
    InternetTroubleshooting)] failed to compile /dialogs/ADSLDisambig.jsp, compiler
    errors:
    /wlsapp/prod/ivrprod/./admin/.wlnotdelete/_appsdir_backup_dir_InternetTroubleshooting_2268781/jsp_servlet/_dialogs/__ADSLDisambig.ja
    va:17: package com.nuance.ps.telus does not exist
    <May 4, 2004 11:42:20 AM MDT> <Error> <HTTP> <101045> <[ServletContext(id=1642582,name=ReportAPayment,context-path=/backup/ReportAPa
    yment)] translation of /dialogs/GetStatus.jsp failed: weblogic.servlet.jsp.JspException:
    (line 7): class 'com.nuance.ps.telus.Shared
    Storage' could not be loaded>
    <May 4, 2004 11:42:20 AM MDT> <Notice> <Application Poller> <149404> <Activate
    application appsdirbackup_dir-0 on admin - Running>
    <May 4, 2004 11:42:22 AM MDT> <Error> <HTTP> <101045> <[ServletContext(id=3439810,name=TelusLogin,context-path=/backup/TelusLogin)]
    translation of /conf/ClearOldKeys.jsp failed: weblogic.servlet.jsp.JspException:
    (line 2): class 'com.nuance.ps.telus.SharedStorage'
    could not be loaded>
    <May 4, 2004 11:42:22 AM MDT> <Error> <Deployer> <149201> <The Slave Deployer
    failed to complete the deployment task with id 16 for
    the application appsdirbackup_dir.
    weblogic.management.ApplicationException: Prepare failed. Task Id = 16
    Thanks,
    Paul

    The short answer to your question is that auto-deployment and multiple
    servers don't mix.
    If you have a single-server domain and choose to use auto-deployment,
    that'll work fine.
    Once you have separate admin/managed servers, you need to use
    weblogic.Deployer, the wldeploy ant task (8.1), or the console to deploy
    applications.
    -- Rob
    Paul wrote:
    Hi,
    We are using WebLogic Server 7.0 SP2 on Solaris 8. Yesterday, a developer copied
    over a new WAR file into the applications directory. Then he ried to restart the
    managed server. This appeared to hang, so he tried restarting the admin. server,
    which also failed. Looking at the log, it looks like the admin. server is trying
    to deploy apps. from the applications/backup directory.
    After I removed the backup directory and edited config.xml to remove all references
    to this directory, I was able to startup the Admin. server (though there were
    still some errors; see later) and the managed server.
    The servers are actually running in "developemnt" mode and have the Aut-Deploy
    feature enabled, so my theory is that the auto-deployment was conflicting with
    the managed server restart. He shouldn't have had to restart the managed server
    since Auto-Deploy is enabled, right?
    I'm also wondering about these errors I got when I the Admin. server finally started:
    Starting WebLogic Server...
    <May 4, 2004 11:41:04 AM MDT> <Notice> <Management> <140005> <Loading configuration
    /wlsapp/prod/ivrprod/./config.xml>
    <May 4, 2004 11:41:14 AM MDT> <Notice> <Security> <090082> <Security initializing
    using realm myrealm.>
    <May 4, 2004 11:41:14 AM MDT> <Notice> <WebLogicServer> <000327> <Starting WebLogic
    Admin Server "admin" for domain "ivrprod">
    <May 4, 2004 11:41:44 AM MDT> <Notice> <Application Poller> <149400> <Activating
    application: appsdirbackup_dir>
    <May 4, 2004 11:41:49 AM MDT> <Notice> <Application Poller> <149404> <Activate
    application appsdirbackup_dir on admin - Running>
    <May 4, 2004 11:41:51 AM MDT> <Notice> <Application Poller> <149404> <Activate
    application appsdirbackup_dir on admin - Completed>
    <May 4, 2004 11:41:54 AM MDT> <Notice> <Management> <141052> <Application Poller
    started for development server.>
    <May 4, 2004 11:41:54 AM MDT> <Notice> <Application Poller> <149400> <Activating
    application: appsdirbackup_dir-0>
    <May 4, 2004 11:41:57 AM MDT> <Notice> <Application Poller> <149404> <Activate
    application appsdirbackup_dir-0 on admin - Running>
    <May 4, 2004 11:41:59 AM MDT> <Notice> <Application Poller> <149404> <Activate
    application appsdirbackup_dir-0 on admin - Running>
    <May 4, 2004 11:42:02 AM MDT> <Notice> <WebLogicServer> <000365> <Server state
    changed to RUNNING>
    <May 4, 2004 11:42:02 AM MDT> <Notice> <WebLogicServer> <000360> <Server started
    in RUNNING mode>
    <May 4, 2004 11:42:13 AM MDT> <Error> <HTTP> <101045> <[ServletContext(id=2268781,name=InternetTroubleshooting,context-path=/backup/
    InternetTroubleshooting)] failed to compile /dialogs/ADSLDisambig.jsp, compiler
    errors:
    /wlsapp/prod/ivrprod/./admin/.wlnotdelete/_appsdir_backup_dir_InternetTroubleshooting_2268781/jsp_servlet/_dialogs/__ADSLDisambig.ja
    va:17: package com.nuance.ps.telus does not exist
    <May 4, 2004 11:42:20 AM MDT> <Error> <HTTP> <101045> <[ServletContext(id=1642582,name=ReportAPayment,context-path=/backup/ReportAPa
    yment)] translation of /dialogs/GetStatus.jsp failed: weblogic.servlet.jsp.JspException:
    (line 7): class 'com.nuance.ps.telus.Shared
    Storage' could not be loaded>
    <May 4, 2004 11:42:20 AM MDT> <Notice> <Application Poller> <149404> <Activate
    application appsdirbackup_dir-0 on admin - Running>
    <May 4, 2004 11:42:22 AM MDT> <Error> <HTTP> <101045> <[ServletContext(id=3439810,name=TelusLogin,context-path=/backup/TelusLogin)]
    translation of /conf/ClearOldKeys.jsp failed: weblogic.servlet.jsp.JspException:
    (line 2): class 'com.nuance.ps.telus.SharedStorage'
    could not be loaded>
    <May 4, 2004 11:42:22 AM MDT> <Error> <Deployer> <149201> <The Slave Deployer
    failed to complete the deployment task with id 16 for
    the application appsdirbackup_dir.
    weblogic.management.ApplicationException: Prepare failed. Task Id = 16
    Thanks,
    Paul

  • Weblogic managed servers question

    Hi all,
    I'm trying to set up a 3 machines , one having weblogic admin
    server and two machines having managed weblogic servers.what i'm not
    undersatnding is :
    1. Do i have to install the weblogic software on all machines with the same
    domain name .?
    2. Do i have to deploy my components/web applications on all machines?
    3. Do i have to put the above machines in a cluster to achieve load
    balancing etc.
    4. How will i access my manage servers considering that they will have 2
    different ips (since they are installed on 2 different
    machines)?
    5.Does anyone know any dosc online which explains these matters.I have gone
    through the weblogic server administrator
    guide , but could not find the information i'm looking for (or have i
    missed any section)?
    Thanks in advance
    Prashant

    Hi.
    My answers are embedded:
    Prashant S wrote:
    Hi all,
    I'm trying to set up a 3 machines , one having weblogic admin
    server and two machines having managed weblogic servers.what i'm not
    undersatnding is :
    1. Do i have to install the weblogic software on all machines with the same
    domain name .?I'm not sure what you mean. The managed servers need to be in the same
    weblogic domain (ie directory under config) if you are using clustering. Also
    if you are using clustering the cluster members (managed servers) need to be on
    the same LAN/subnet.
    >
    2. Do i have to deploy my components/web applications on all machines?You do not have to deploy your applications on your admin server. Typically I
    install a webapp (or whatever) on the admin server then select the targets for
    deployment to the managed servers.
    >
    3. Do i have to put the above machines in a cluster to achieve loadbalancing
    etc.Yes.
    >
    4. How will i access my manage servers considering that they will have 2
    different ips (since they are installed on 2 different machines)?For web applications the standard practice is to use a proxy front-end to the
    cluster. We offer plugin's for Netscape, Apache and IIS that handle
    loadbalancing and failover for weblogic clusters. We also offer the
    HttpClusterServlet if you prefer to use an instance of WLS to proxy to your
    cluster. Use your browser to hit the proxy, which will pass your request on to
    a cluster member. See the following link for details:
    http://edocs.bea.com/wls/docs61/adminguide/http_proxy_cluster.html
    >
    5.Does anyone know any dosc online which explains these matters.I have gone
    through the weblogic server administrator
    guide , but could not find the information i'm looking for (or have i
    missed any section)?
    Thanks in advance
    Prashantnot sure if you have seen this but
    http://edocs.bea.com/wls/docs61/cluster/index.html contains links to docs
    discussing most cluster administration issues.
    Hope this helps.
    Michael Young
    Developer Relations Engineer
    BEA Support

  • Browse jms destinations on managed servers (from admin server)

    I need to browse JMS destinations from the admin server (in a WebLogic
    9.2 console extension) that are only deployed on the managed servers.
    I can get destination attributes via the domain runtime server, but
    no JNDI or actually browse the destinations. All destinations in
    which I am interested are queues.
    I know I can change my initial context, but if that is the way to go, is there a way to determine the managed
    servers' URLs at runtime?
    Thank you for any help,
    Seth

    hi
    this worked for me (on 8.1). I suppose there are
    better ways in 9.2
    Context adminCtx = null;
    adminCtx = getInitialContextForAdminServer();
    MBeanHome adminhome = (MBeanHome)
    adminCtx.lookup(MBeanHome.ADMIN_JNDI_NAME);
    // Get the list of running managed
    ning managed servers and iterate over itSet
    Set srSet =
    Set srSet =
    adminhome.getMBeansByType("ServerRuntime");
    Iterator sr_iter = srSet.iterator();
    while (sr_iter.hasNext())
    ServerRuntimeMBean bean =
    timeMBean bean = (ServerRuntimeMBean) sr_iter.next();
    // Get the home for the managed
    for the managed server
    MBeanHome remoteHome = (MBeanHome)
    me = (MBeanHome) adminCtx.lookup(MBeanHome.JNDI_NAME
    + "." + bean.getName());
    // Get the MBeanServer for the
    anServer for the managed server
    MBeanServer rmbs =
    eanServer rmbs = remoteHome.getMBeanServer();
    //invoke it
    ObjectName objectName= new
    objectName= new ObjectName("$mbean");
    rmbs.invoke(objectName,operation,params,types);
    Edited by deepshet at 05/05/2007 10:00 AMThank you for the help.
    MBeanHome is deprecated as of 9.0, so I was unable to directly use your example. You have helped though, thank you.
    As of now I am querying the domain runtime server for:
    ObjectName("com.bea:*,Type=ServerRuntime")
    I am then iterating through the returned Set to get the server URLs and then setting my InitialContext with a PROVIDER_URL of the managed servers. This allows me to Look Up a Destination without JNDI based on step 4 from [url http://edocs.bea.com/wls/docs92/jms/implement.html#wp1313933]here. I can then browse as needed.
    The ugly part is that if I include the Admin URL in my PROVIDER_URL then it does not work, so I am checking for it as I loop through the set of ServerRuntimes and not including it.
    Further though slightly less annoying is that the managed server URLs include "t3://" but if I leave it in there, a malformed URL exception is thrown when setting the PROVIDER_URL. So I also remove all of those and then preppend one on the front for PROVIDER_URL as I actually need.
    It is not pretty, but it is working on the only cluster I have been able to try thus far.
    If anyone was a cleaner suggestion, please share.

  • Help!! Auto-Deploy and Check For Updates in an OPMN-managed instance

    I'm trying to use the auto-deploy and check for updates functions in an OAS 10.1.0.3 but I can not make it work.
    I don't Know if this functions are only availables for a standalone OC4J instance.
    Can anyone help me??
    Thanks!!! and sorry for my poor english.

    Auto-Deploy is not really designed for an OPMN managed instance -- in earlier releases, this would not even work correctly since deployments where stored in the DCM subsystem and any subsequent configuration changes made via DCM would overwrite the config and you'd lose the "auto-deployed" application.
    In 10.1.3.x where DCM is no longer in the picture, and the auto-deploy polling is a function of Oc4J itself, it may work. Be aware that this is not something that is tested in OPMN managed environments.
    What configuration changes have you made?
    You need to ensure you have modified server.xml so the attribute check-for-updates="all" and you've added the attribute application-auto-deploy-directory and have it pointing at a directory to watch.
    -steve-

  • Managed servers cache not updated when we deploy a new EAR....

    Hi All,
    I have the following query :
    Perform the following steps :
    1. Stop the managed servers
    2. Delete and create jms servers
    3. Undeploy existing EARs
    4. Deploy new EARs
    5. Start the managed servers
    If we perform these steps we see that the managed server cache normally get a copy of the new EARs from the admin server.
    However if we modify the above steps as :
    1. Stop the managed servers
    2. Delete and create jms servers
    3. Undeploy existing EARs
    4. Deploy new EARs
    5. Re-do step #2, i.e. delete and create jms servers
    6. Start the managed servers
    This time the managed server's cache is not updated with the new EAR file when it starts up.
    Any idea as to why this behaviour....also the EAR could be a small sample MDB application from weblogic.
    We deploy these app via java weblogic.Deployer command.
    Any thoughts ..would be highly appreciated ....
    Regards,
    Stacey.
    Edited by: stacey on Jun 22, 2010 8:35 PM

    Hi Stacey,
    Did you check the EAR copy cached before doing Setp 5
    ("5. Re-do step #2, i.e. delete and create jms servers")
    Can you confirm once.
    Regards,
    Kal.

  • Singleton deployed in cluster runs in both managed servers

    Hi,
    I have deployed a singleton service in a Weblogic (9.2) cluster. This cluster has two managed servers.
    Recently we saw instances of this singleton services running on both these managed servers, which resulted in a lot of duplicate data in our system.
    Is this a bug in the system? How can we prevent this?

    Hi,
    Could you please refer the following links and confirm me if you had defined and configured the singleton service as mentioned in the links:
    http://download.oracle.com/docs/cd/E13222_01/wls/docs92/ConsoleHelp/taskhelp/clusters/ConfigureSingletonService.html
    http://download.oracle.com/docs/cd/E13222_01/wls/docs92/ConsoleHelp/taskhelp/clusters/DefineSingletonService.html
    regards,
    Zeno

  • Auto Deployment Rule download failed (0X87d20417) Failed to download the update from internet. Error = 16389

    Hi there,
    I have massive problems with Auto Deployment Rules.
    I get the Error from above.
    ruleengine.log says:
    Failed to download the update from internet. Error = 16389 SMS_RULE_ENGINE 3/11/2015 11:41:57 AM 5608 (0x15E8)
    Failed to download ContentID 16936340 for UpdateID 16953422. Error code = 16389 SMS_RULE_ENGINE 3/11/2015 11:41:57 AM 5608 (0x15E8)
    Failed to download any update SMS_RULE_ENGINE 3/11/2015 11:41:58 AM 5608 (0x15E8)
    Failed to download update contents. SMS_RULE_ENGINE 3/11/2015 11:41:58 AM 5608 (0x15E8)
    No new update was added to the package. Package "00000116" would not be updated. SMS_RULE_ENGINE 3/11/2015 11:41:58 AM 5608 (0x15E8)
    Failed to run the DownloadAction for the AutoDeployment. SMS_RULE_ENGINE 3/11/2015 11:41:58 AM 5608 (0x15E8)
    STATMSG: ID=8706 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_RULE_ENGINE" SYS=NE-SCCM-02.services.internal SITE=000 PID=3392 TID=5608 GMTDATE=Mi Mrz 11 10:41:58.606 2015 ISTR0="SMS Rule Engine" ISTR1="Failed to download one or more content files" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 SMS_RULE_ENGINE 3/11/2015 11:41:58 AM 5608 (0x15E8)
    CRuleHandler: Enforcing Actions for Rule 16777227 failed!
    Failed to download the update from internet. Error = 16389 SMS_RULE_ENGINE 3/11/2015 11:51:03 AM 5608 (0x15E8)
    Failed to download ContentID 16936340 for UpdateID 16953422. Error code = 16389 SMS_RULE_ENGINE 3/11/2015 11:51:03 AM 5608 (0x15E8)
    CRuleHandler: Enforcing Actions for Rule 16777230 failed! SMS_RULE_ENGINE 3/11/2015 11:51:10 AM 5608 (0x15E8)
    CRuleHandler: ResetRulesAndCleanUp() SMS_RULE_ENGINE 3/11/2015 11:51:10 AM 5608 (0x15E8)
    Updated Failure Information for Rule: 16777226 SMS_RULE_ENGINE 3/11/2015 11:51:10 AM 5608 (0x15E8)
    Updated Failure Information for Rule: 16777227 SMS_RULE_ENGINE 3/11/2015 11:51:10 AM 5608 (0x15E8)
    Updated Failure Information for Rule: 16777230 SMS_RULE_ENGINE 3/11/2015 11:51:10 AM 5608 (0x15E8)
    whereas in WSUSCTRL.log i get:
    System.Net.WebException: The underlying connection was closed: A connection that was expected to be kept alive was closed by the server. ---> System.IO.IOException: Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host. ---> System.Net.Sockets.SocketException: An existing connection was forcibly closed by the remote host~~ at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size)~~ --- End of inner exception stack trace ---~~ at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size)~~ at System.Net.PooledStream.Read(Byte[] buffer, Int32 offset, Int32 size)~~ at System.Net.Connection.SyncRead(HttpWebRequest request, Boolean userRetrievedStream, Boolean probeRead)~~ --- End of inner exception stack trace ---~~ at Microsoft.UpdateServices.Administration.AdminProxy.CreateUpdateServer(Object[] args)~~ at Microsoft.UpdateServices.Administration.AdminProxy.GetUpdateServer()~~ at Microsoft.SystemsManagementServer.WSUS.WSUSServer.ConnectToWSUSServer(String ServerName, Boolean UseSSL, Int32 PortNumber)
    System.Net.WebException: The request failed with HTTP status 503: Service Unavailable.~~ at Microsoft.UpdateServices.Administration.AdminProxy.CreateUpdateServer(Object[] args)~~ at Microsoft.UpdateServices.Administration.AdminProxy.GetUpdateServer()~~ at Microsoft.SystemsManagementServer.WSUS.WSUSServer.ConnectToWSUSServer(String ServerName, Boolean UseSSL, Int32 PortNumber) SMS_WSUS_CONTROL_MANAGER 3/11/2015 11:57:04 AM 6032 (0x1790)
    Failed to set WSUS Local Configuration. Will retry configuration in 1 minutes SMS_WSUS_CONTROL_MANAGER 3/11/2015 11:57:04 AM 6032 (0x1790)
    Attempting connection to local WSUS server SMS_WSUS_CONTROL_MANAGER 3/11/2015 11:57:04 AM 6032 (0x1790)
    System.Net.WebException: The request failed with HTTP status 503: Service Unavailable.~~ at Microsoft.UpdateServices.Administration.AdminProxy.CreateUpdateServer(Object[] args)~~ at Microsoft.UpdateServices.Administration.AdminProxy.GetUpdateServer()~~ at Microsoft.SystemsManagementServer.WSUS.WSUSServer.ConnectToWSUSServer(String ServerName, Boolean UseSSL, Int32 PortNumber) SMS_WSUS_CONTROL_MANAGER 3/11/2015 11:57:04 AM 6032 (0x1790)
    Failures reported during periodic health check by the WSUS Server XYZ. Will retry check in 1 minutes SMS_WSUS_CONTROL_MANAGER 3/11/2015 11:57:04 AM 6032 (0x1790)
    ooGDoo

    There only is  Patchdownloader.log under
    \\SCCMSERVER\C$\Program Files\SMS_CCM\LOGS\Patchdownloader.log
    Do you mean this Log?
    Failed to move \\teg.teda\admin\SCCM\SU\Baseline\Patches\e7b56916-3356-4f59-ac71-be7ef2159050.1 to \\teg.teda\admin\SCCM\SU\Baseline\Patches\e7b56916-3356-4f59-ac71-be7ef2159050, error 64 Software Updates Patch Downloader 3/11/2015 11:50:33 AM 5608 (0x15E8)
    Will retry in 10000ms Software Updates Patch Downloader 3/11/2015 11:50:33 AM 5608 (0x15E8)
    Failed to move \\teg.teda\admin\SCCM\SU\Baseline\Patches\e7b56916-3356-4f59-ac71-be7ef2159050.1 to \\teg.teda\admin\SCCM\SU\Baseline\Patches\e7b56916-3356-4f59-ac71-be7ef2159050, error 5 Software Updates Patch Downloader 3/11/2015 11:50:43 AM 5608 (0x15E8)
    Will retry in 10000ms Software Updates Patch Downloader 3/11/2015 11:50:43 AM 5608 (0x15E8)
    Failed to move \\teg.teda\admin\SCCM\SU\Baseline\Patches\e7b56916-3356-4f59-ac71-be7ef2159050.1 to \\teg.teda\admin\SCCM\SU\Baseline\Patches\e7b56916-3356-4f59-ac71-be7ef2159050, error 5 Software Updates Patch Downloader 3/11/2015 11:50:53 AM 5608 (0x15E8)
    Will retry in 10000ms Software Updates Patch Downloader 3/11/2015 11:50:53 AM 5608 (0x15E8)
    Failed to move \\teg.teda\admin\SCCM\SU\Baseline\Patches\e7b56916-3356-4f59-ac71-be7ef2159050.1 to \\teg.teda\admin\SCCM\SU\Baseline\Patches\e7b56916-3356-4f59-ac71-be7ef2159050, error 5 Software Updates Patch Downloader 3/11/2015 11:51:03 AM 5608 (0x15E8)
    MoveFile() failed to rename \\teg.teda\admin\SCCM\SU\Baseline\Patches\e7b56916-3356-4f59-ac71-be7ef2159050.1 to \\teg.teda\admin\SCCM\SU\Baseline\Patches\e7b56916-3356-4f59-ac71-be7ef2159050 with GetLastError() = 5 Software Updates Patch Downloader 3/11/2015 11:51:03 AM 5608 (0x15E8)
    ERROR: DownloadContentFiles() failed with hr=0x80004005 Software Updates Patch Downloader
    ooGDoo

  • Problems with deploying file to one of the managed servers on a cluster

    We are running Weblogic 10.3.
    When I start both managed servers from the Admin Console, one fails with the error below and in Admin state, but the other managed server starts up correctly.
    The only difference from when it was first working is that the managed server ServerBox1 was imaged and loaded onto new hardware and all network/os properties configured the same as the old box.
    ####<Timestamp> <Info> <Deployer> <box1> <ServerBox1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1333048292425> <BEA-149059> <Module DocFile.war of application DocFile is transitioning from STATE_NEW to STATE_PREPARED on server ServerBox1.>
    ####<Mar 29, 2012 3:11:32 PM EDT> <Error> <HTTP> <box1> <ServerBox1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1333048292488> <BEA-101064> <[WebAppModule(DocFile:DocFile.war)] Error parsing descriptor in Web appplication "/domainPath/servers/ServerBox1/stage/DocFile/DocFile.war"
    java.lang.NullPointerException
           at com.bea.xbean.regex.RangeToken.match(RangeToken.java:485)
           at com.bea.xbean.regex.RegularExpression.matchString(RegularExpression.java:1673)
           at com.bea.xbean.regex.RegularExpression.matches(RegularExpression.java:1432)
           at com.bea.xbean.regex.RegularExpression.matches(RegularExpression.java:1370)
           at com.bea.xbean.schema.SchemaTypeImpl.matchPatternFacet(SchemaTypeImpl.java:1362)
           at com.bea.xbean.values.JavaDecimalHolderEx.validateLexical(JavaDecimalHolderEx.java:71)
           at com.bea.xbean.validator.Validator.validateAtomicType(Validator.java:1296)
           at com.bea.xbean.validator.Validator.validateSimpleType(Validator.java:1259)
           at com.bea.xbean.validator.Validator.validateSimpleType(Validator.java:1195)
           at com.bea.xbean.validator.Validator.handleText(Validator.java:835)
           at com.bea.xbean.validator.Validator.textEvent(Validator.java:820)
           at com.bea.xbean.validator.Validator.nextEvent(Validator.java:250)
           at com.bea.xbean.validator.ValidatingXMLStreamReader.validate_event(ValidatingXMLStreamReader.java:654)
           at com.bea.xbean.validator.ValidatingXMLStreamReader.next(ValidatingXMLStreamReader.java:544)
           at com.bea.xbean.richParser.XMLStreamReaderExtImpl.next(XMLStreamReaderExtImpl.java:1122)
           at com.bea.xbean.richParser.XMLStreamReaderExtImpl$CharSeqTrimWS.fillBuffer(XMLStreamReaderExtImpl.java:804)
           at com.bea.xbean.richParser.XMLStreamReaderExtImpl$CharSeqTrimWS.reload(XMLStreamReaderExtImpl.java:755)
           at com.bea.xbean.richParser.XMLStreamReaderExtImpl.getBigIntegerValue(XMLStreamReaderExtImpl.java:155)
           at com.bea.staxb.runtime.internal.UnmarshalResult.getBigIntegerValue(UnmarshalResult.java:467)
           at com.bea.staxb.runtime.internal.IntegerToIntTypeConverter.getObject(IntegerToIntTypeConverter.java:34)
           at com.bea.staxb.runtime.internal.BaseSimpleTypeConverter.unmarshal(BaseSimpleTypeConverter.java:39)
           at com.bea.staxb.runtime.internal.LiteralUnmarshalResult.unmarshalElementProperty(LiteralUnmarshalResult.java:167)
           at com.bea.staxb.runtime.internal.LiteralUnmarshalResult.extractAndFillElementProp(LiteralUnmarshalResult.java:136)
           at com.bea.staxb.runtime.internal.ByNameUnmarshaller.deserializeContents(ByNameUnmarshaller.java:51)
           at com.bea.staxb.runtime.internal.AttributeUnmarshaller.unmarshalIntoIntermediary(AttributeUnmarshaller.java:47)
           at com.bea.staxb.runtime.internal.LiteralUnmarshalResult.unmarshalElementProperty(LiteralUnmarshalResult.java:164)
           at com.bea.staxb.runtime.internal.LiteralUnmarshalResult.extractAndFillElementProp(LiteralUnmarshalResult.java:136)
           at com.bea.staxb.runtime.internal.ByNameUnmarshaller.deserializeContents(ByNameUnmarshaller.java:51)
           at com.bea.staxb.runtime.internal.AttributeUnmarshaller.unmarshalIntoIntermediary(AttributeUnmarshaller.java:47)
           at com.bea.staxb.runtime.internal.UnmarshalResult.unmarshalBindingType(UnmarshalResult.java:189)
           at com.bea.staxb.runtime.internal.UnmarshalResult.unmarshalDocument(UnmarshalResult.java:159)
           at com.bea.staxb.runtime.internal.UnmarshallerImpl.unmarshal(UnmarshallerImpl.java:65)
           at weblogic.descriptor.internal.MarshallerFactory$1.createDescriptor(MarshallerFactory.java:141)
           at weblogic.descriptor.BasicDescriptorManager.createDescriptor(BasicDescriptorManager.java:306)
           at weblogic.application.descriptor.AbstractDescriptorLoader2.getDescriptorBeanFromReader(AbstractDescriptorLoader2.java:788)
           at weblogic.application.descriptor.AbstractDescriptorLoader2.createDescriptorBean(AbstractDescriptorLoader2.java:409)
           at weblogic.application.descriptor.AbstractDescriptorLoader2.loadDescriptorBeanWithoutPlan(AbstractDescriptorLoader2.java:759)
           at weblogic.application.descriptor.AbstractDescriptorLoader2.loadDescriptorBean(AbstractDescriptorLoader2.java:768)
           at weblogic.servlet.internal.WebAppDescriptor.getWebAppBean(WebAppDescriptor.java:141)
           at weblogic.servlet.internal.WebAppModule.loadDescriptor(WebAppModule.java:1193)
           at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:350)
           at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:176)
           at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93)
           at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:387)
           at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
           at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:58)
           at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:42)
           at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:615)
           at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
           at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191)
           at weblogic.application.internal.SingleModuleDeployment.prepare(SingleModuleDeployment.java:16)
           at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:155)
           at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
           at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:141)
           at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:39)
           at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:187)
           at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:21)
           at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:233)
           at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:165)
           at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
           at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:173)
           at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:89)
           at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
           at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
           at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    >
    ####<Timestamp> <Info> <Deployer> <box1> <ServerBox1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1333048292506> <BEA-149061> <Module DocFile.war of application DocFile failed to transition from STATE_NEW to STATE_PREPARED on server ServerBox1.>
    ####<Mar 29, 2012 3:11:32 PM EDT> <Error> <Deployer> <box1> <ServerBox1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1333048292727> <BEA-149205> <Failed to initialize the application 'DocFile' due to error weblogic.application.ModuleException: [HTTP:101064][WebAppModule(DocFile:DocFile.war)] Error parsing descriptor in Web appplication "/domainPath/servers/ServerBox1/stage/DocFile/DocFile.war"
    java.lang.NullPointerException
           at com.bea.xbean.regex.RangeToken.match(RangeToken.java:485)
           at com.bea.xbean.regex.RegularExpression.matchString(RegularExpression.java:1673)
           at com.bea.xbean.regex.RegularExpression.matches(RegularExpression.java:1432)
           at com.bea.xbean.regex.RegularExpression.matches(RegularExpression.java:1370)
           at com.bea.xbean.schema.SchemaTypeImpl.matchPatternFacet(SchemaTypeImpl.java:1362)
           at com.bea.xbean.values.JavaDecimalHolderEx.validateLexical(JavaDecimalHolderEx.java:71)
           at com.bea.xbean.validator.Validator.validateAtomicType(Validator.java:1296)
           at com.bea.xbean.validator.Validator.validateSimpleType(Validator.java:1259)
           at com.bea.xbean.validator.Validator.validateSimpleType(Validator.java:1195)
           at com.bea.xbean.validator.Validator.handleText(Validator.java:835)
           at com.bea.xbean.validator.Validator.textEvent(Validator.java:820)
           at com.bea.xbean.validator.Validator.nextEvent(Validator.java:250)
           at com.bea.xbean.validator.ValidatingXMLStreamReader.validate_event(ValidatingXMLStreamReader.java:654)
           at com.bea.xbean.validator.ValidatingXMLStreamReader.next(ValidatingXMLStreamReader.java:544)
           at com.bea.xbean.richParser.XMLStreamReaderExtImpl.next(XMLStreamReaderExtImpl.java:1122)
           at com.bea.xbean.richParser.XMLStreamReaderExtImpl$CharSeqTrimWS.fillBuffer(XMLStreamReaderExtImpl.java:804)
           at com.bea.xbean.richParser.XMLStreamReaderExtImpl$CharSeqTrimWS.reload(XMLStreamReaderExtImpl.java:755)
           at com.bea.xbean.richParser.XMLStreamReaderExtImpl.getBigIntegerValue(XMLStreamReaderExtImpl.java:155)
           at com.bea.staxb.runtime.internal.UnmarshalResult.getBigIntegerValue(UnmarshalResult.java:467)
           at com.bea.staxb.runtime.internal.IntegerToIntTypeConverter.getObject(IntegerToIntTypeConverter.java:34)
           at com.bea.staxb.runtime.internal.BaseSimpleTypeConverter.unmarshal(BaseSimpleTypeConverter.java:39)
           at com.bea.staxb.runtime.internal.LiteralUnmarshalResult.unmarshalElementProperty(LiteralUnmarshalResult.java:167)
           at com.bea.staxb.runtime.internal.LiteralUnmarshalResult.extractAndFillElementProp(LiteralUnmarshalResult.java:136)
           at com.bea.staxb.runtime.internal.ByNameUnmarshaller.deserializeContents(ByNameUnmarshaller.java:51)
           at com.bea.staxb.runtime.internal.AttributeUnmarshaller.unmarshalIntoIntermediary(AttributeUnmarshaller.java:47)
           at com.bea.staxb.runtime.internal.LiteralUnmarshalResult.unmarshalElementProperty(LiteralUnmarshalResult.java:164)
           at com.bea.staxb.runtime.internal.LiteralUnmarshalResult.extractAndFillElementProp(LiteralUnmarshalResult.java:136)
           at com.bea.staxb.runtime.internal.ByNameUnmarshaller.deserializeContents(ByNameUnmarshaller.java:51)
           at com.bea.staxb.runtime.internal.AttributeUnmarshaller.unmarshalIntoIntermediary(AttributeUnmarshaller.java:47)
           at com.bea.staxb.runtime.internal.UnmarshalResult.unmarshalBindingType(UnmarshalResult.java:189)
           at com.bea.staxb.runtime.internal.UnmarshalResult.unmarshalDocument(UnmarshalResult.java:159)
           at com.bea.staxb.runtime.internal.UnmarshallerImpl.unmarshal(UnmarshallerImpl.java:65)
           at weblogic.descriptor.internal.MarshallerFactory$1.createDescriptor(MarshallerFactory.java:141)
           at weblogic.descriptor.BasicDescriptorManager.createDescriptor(BasicDescriptorManager.java:306)
           at weblogic.application.descriptor.AbstractDescriptorLoader2.getDescriptorBeanFromReader(AbstractDescriptorLoader2.java:788)
           at weblogic.application.descriptor.AbstractDescriptorLoader2.createDescriptorBean(AbstractDescriptorLoader2.java:409)
           at weblogic.application.descriptor.AbstractDescriptorLoader2.loadDescriptorBeanWithoutPlan(AbstractDescriptorLoader2.java:759)
           at weblogic.application.descriptor.AbstractDescriptorLoader2.loadDescriptorBean(AbstractDescriptorLoader2.java:768)
           at weblogic.servlet.internal.WebAppDescriptor.getWebAppBean(WebAppDescriptor.java:141)
           at weblogic.servlet.internal.WebAppModule.loadDescriptor(WebAppModule.java:1193)
           at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:350)
           at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:176)
           at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93)
           at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:387)
           at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
           at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:58)
           at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:42)
           at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:615)
           at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
           at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191)
           at weblogic.application.internal.SingleModuleDeployment.prepare(SingleModuleDeployment.java:16)
           at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:155)
           at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
           at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:141)
           at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:39)
           at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:187)
           at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:21)
           at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:233)
           at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:165)
           at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
           at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:173)
           at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:89)
           at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
           at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
           at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    null.
    weblogic.application.ModuleException: [HTTP:101064][WebAppModule(DocFile:DocFile.war)] Error parsing descriptor in Web appplication "/domainPath/servers/ServerBox1/stage/DocFile/DocFile.war"
    java.lang.NullPointerException
           at com.bea.xbean.regex.RangeToken.match(RangeToken.java:485)
           at com.bea.xbean.regex.RegularExpression.matchString(RegularExpression.java:1673)
           at com.bea.xbean.regex.RegularExpression.matches(RegularExpression.java:1432)
           at com.bea.xbean.regex.RegularExpression.matches(RegularExpression.java:1370)
           at com.bea.xbean.schema.SchemaTypeImpl.matchPatternFacet(SchemaTypeImpl.java:1362)
           at com.bea.xbean.values.JavaDecimalHolderEx.validateLexical(JavaDecimalHolderEx.java:71)
           at com.bea.xbean.validator.Validator.validateAtomicType(Validator.java:1296)
           at com.bea.xbean.validator.Validator.validateSimpleType(Validator.java:1259)
           at com.bea.xbean.validator.Validator.validateSimpleType(Validator.java:1195)
           at com.bea.xbean.validator.Validator.handleText(Validator.java:835)
           at com.bea.xbean.validator.Validator.textEvent(Validator.java:820)
           at com.bea.xbean.validator.Validator.nextEvent(Validator.java:250)
           at com.bea.xbean.validator.ValidatingXMLStreamReader.validate_event(ValidatingXMLStreamReader.java:654)
           at com.bea.xbean.validator.ValidatingXMLStreamReader.next(ValidatingXMLStreamReader.java:544)
           at com.bea.xbean.richParser.XMLStreamReaderExtImpl.next(XMLStreamReaderExtImpl.java:1122)
           at com.bea.xbean.richParser.XMLStreamReaderExtImpl$CharSeqTrimWS.fillBuffer(XMLStreamReaderExtImpl.java:804)
           at com.bea.xbean.richParser.XMLStreamReaderExtImpl$CharSeqTrimWS.reload(XMLStreamReaderExtImpl.java:755)
           at com.bea.xbean.richParser.XMLStreamReaderExtImpl.getBigIntegerValue(XMLStreamReaderExtImpl.java:155)
           at com.bea.staxb.runtime.internal.UnmarshalResult.getBigIntegerValue(UnmarshalResult.java:467)
           at com.bea.staxb.runtime.internal.IntegerToIntTypeConverter.getObject(IntegerToIntTypeConverter.java:34)
           at com.bea.staxb.runtime.internal.BaseSimpleTypeConverter.unmarshal(BaseSimpleTypeConverter.java:39)
           at com.bea.staxb.runtime.internal.LiteralUnmarshalResult.unmarshalElementProperty(LiteralUnmarshalResult.java:167)
           at com.bea.staxb.runtime.internal.LiteralUnmarshalResult.extractAndFillElementProp(LiteralUnmarshalResult.java:136)
           at com.bea.staxb.runtime.internal.ByNameUnmarshaller.deserializeContents(ByNameUnmarshaller.java:51)
           at com.bea.staxb.runtime.internal.AttributeUnmarshaller.unmarshalIntoIntermediary(AttributeUnmarshaller.java:47)
           at com.bea.staxb.runtime.internal.LiteralUnmarshalResult.unmarshalElementProperty(LiteralUnmarshalResult.java:164)
           at com.bea.staxb.runtime.internal.LiteralUnmarshalResult.extractAndFillElementProp(LiteralUnmarshalResult.java:136)
           at com.bea.staxb.runtime.internal.ByNameUnmarshaller.deserializeContents(ByNameUnmarshaller.java:51)
           at com.bea.staxb.runtime.internal.AttributeUnmarshaller.unmarshalIntoIntermediary(AttributeUnmarshaller.java:47)
           at com.bea.staxb.runtime.internal.UnmarshalResult.unmarshalBindingType(UnmarshalResult.java:189)
           at com.bea.staxb.runtime.internal.UnmarshalResult.unmarshalDocument(UnmarshalResult.java:159)
           at com.bea.staxb.runtime.internal.UnmarshallerImpl.unmarshal(UnmarshallerImpl.java:65)
           at weblogic.descriptor.internal.MarshallerFactory$1.createDescriptor(MarshallerFactory.java:141)
           at weblogic.descriptor.BasicDescriptorManager.createDescriptor(BasicDescriptorManager.java:306)
           at weblogic.application.descriptor.AbstractDescriptorLoader2.getDescriptorBeanFromReader(AbstractDescriptorLoader2.java:788)
           at weblogic.application.descriptor.AbstractDescriptorLoader2.createDescriptorBean(AbstractDescriptorLoader2.java:409)
           at weblogic.application.descriptor.AbstractDescriptorLoader2.loadDescriptorBeanWithoutPlan(AbstractDescriptorLoader2.java:759)
           at weblogic.application.descriptor.AbstractDescriptorLoader2.loadDescriptorBean(AbstractDescriptorLoader2.java:768)
           at weblogic.servlet.internal.WebAppDescriptor.getWebAppBean(WebAppDescriptor.java:141)
           at weblogic.servlet.internal.WebAppModule.loadDescriptor(WebAppModule.java:1193)
           at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:350)
           at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:176)
           at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93)
           at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:387)
           at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
           at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:58)
           at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:42)
           at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:615)
           at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
           at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191)
           at weblogic.application.internal.SingleModuleDeployment.prepare(SingleModuleDeployment.java:16)
           at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:155)
           at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
           at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:141)
           at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:39)
           at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:187)
           at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:21)
           at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:233)
           at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:165)
           at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
           at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:173)
           at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:89)
           at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
           at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
           at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    null
    I also noticed that the DocFile directory inside the stage directory is deleted once the ServerBox1 is started completely.
    Thanks for the assistance.

    Hi Partha. Did you get a solution to your problem with high connection delay times on your server? I'm having a similar problem and saw your post.
    Thanks,
    Mark

  • How to deploy config files to managed servers

    We have several configuration files that are used by our EJB application at
    startup. Is there a way to automatically deploy these configuration files
    to the managed servers. Right now, we are forced to FTP to files over to
    the managed servers as part of the deployment process. It would be nice if
    there were an easier way.
    Randy Ott

    why cant you include them inside your ejbjar as resource files ?
    prasen
    Nitin Shenoy wrote:
    >
    Guess no one replied!!
    "Randy Ott" <[email protected]> wrote in message
    news:3b67022e$[email protected]..
    We have several configuration files that are used by our EJB applicationat
    startup. Is there a way to automatically deploy these configuration files
    to the managed servers. Right now, we are forced to FTP to files over to
    the managed servers as part of the deployment process. It would be niceif
    there were an easier way.
    Randy Ott

  • Is there a way to auto deploy executable update?

    I am in a position  where I develope database systems. I control everything with LabVIEW executables, and I am constantly deploying updates. What I do is to load my flash drive with the latest and greatest and run around to 50 or so computers updating the different systems. About half of the computers have the user as an administrator, and the other half I am able to log on as an administrator to install the updates. This is a time consuming and interuptive process. Is there a way to force updates to the variious computers whether the user has an administrator account or not? I don't want the programs to be stored in an accessible location, because the security of the system depends on only certain people having certain programs. There are roughly 25 programs that make up the systems. Thank you for any suggestions that will make the deployment of updates less painful.

    Nickerbocker wrote:
    I can't think of anything built into LabVIEW that would allow this to happen seamlessly.  I would probably write in an automatic update feature in the main program that periodically checks a secure location for a new file or something along those lines.  That way, computers and users that are already authorized to use the program will get their updates when they are available and people who do not have it will not get their updates.  It will probably involve a lot of extra coding and be a whole lot of fun...  The process could be something like:
    1. Main VI checks secure network location for update.
    2. If new update exists, Main VI shuts itself down and calls an "updater" VI that replaces the Main VI's executable with the new one.
    3. Updater VI closes itself and calls the new Main VI to load
    You could also add something like an email alert that a particular system was updated successfully (or not).  Since LabVIEW comes with VI's for accessing FTP servers or SMB file shares, I think this would be fairly straight forward.
    Our IT guy did something like this for one of the main VB programs we use in engineering.  However, you could do it by eliminating a step.
    Let the exectuable that the user launches be the updating program.  If it detects a new executable is available, it copies that to the user's hard drive then launches that.  If a new exectuable is not present, then it just launches the executable already present.  I believe he just uses a comparison of the executable file dates.
    This will essentially eliminate step 2 where the main VI needs to shut itself down and call an updater, because the main VI executable that you want to update hasn't actually launched yet.

  • Auto Deployment versus Hot Deployment

    Hi,
    Can anyone one please tell me what the real difference is between auto deployment versus hot deployment in WLS 8.1 SP4 as I am confused after reading the documentation.
    Can they both be individually enabled or disabled?
    Can I just disable Auto deployment and only use Hot deployment (or is hot deployment another name for manual deployment).
    I know in Jrun that you can add hot-deploy directories in Jrun console, where now when a developers put a new WAR file or an updated WAR file - the server automatically deploys/redeploys it at that moment (this hot deploy directory could be any directory on the server or even on a different NTFS drive on same server).
    Can this be achieved with WLS 8.1?
    Thanks
    J

    AutoDeployment automatically deploy/redeploy or undeploy the application when the application is put or removed from the applications folder under the wls domain directory. It is only available in Admin Server while it is running in development mode (default mode). It is not available if the Admin Server is running in Production mode.
    Hot deployment deals with updating the application modules like ejb or war inside an ear without redeploying the complete application. This is dependent on the classloader structure of the given application. So if a ear has a webapp and a ejb with default classloader structure, then only the webapp can be hot redeployed without complete application redeploy. It can be used for apps deployed on both Admin and Managed servers and is available for both production and development mode.
    Autodeployment is mainly to save the developer from running the deploy command every time while the app is being developed iteratively. Just copying the updated application in the applications folder will redeploy the app on the Admin server.
    Hot deployment is mainly used to update the individual modules or jsps/servlets/classes in a module without redeploying the complete app.

  • Error auto-deploying a Web App (.WAR file)

    Hello,
    Weblogic 6.1 throws a FileNotFoundException about 10% of the time for me when
    auto-deploying a Web app. Has anyone else run into this? I searched the newsgroups
    but didn't come up with anything, so I thought I'd start here.
    My build/deploy cycle is managed by an Ant build file that creates a WAR file
    of my web application and then drops it into $WL_HOME/config/mydomain/applications.
    Occasionally when I do this, I get the error shown below. Originally I was building
    the WAR file right in the ../applications directory, so I thought that might be
    an issue. So, I started building the WAR file in a staging directory and copying
    it into ../applications. No luck. Next, I tried deleting the original WAR file
    from ../applications, and THEN copying the new one over from the staging directory.
    Still fails occasionally.
    Let's see. This is Weblogic 6.1 on Win2K. The only other thing is that my dev/build/staging
    environment is on a network share, and it's from there that I'm copying the WAR
    file to my local machine (where WL is running).
    If someone has seen and/or knows what is up with this, great. If not, it's not
    a show-stopper.
    Thanks!
    Cheers,
    David
    ========================================================
    <Apr 8, 2002 9:05:00 AM PDT> <Error> <Management> <IOException opening application
    mydomain:Name=private-banking,Type=Application, loading from path .\config\mydomain\applications\private-banking.war
    java.io.FileNotFoundException: error in opening zip file
         at weblogic.management.mbeans.custom.Application.findType(Application.java:1833)
         at weblogic.management.mbeans.custom.Application.adminLoad(Application.java:444)
         at weblogic.management.mbeans.custom.Application.load(Application.java:387)
         at java.lang.reflect.Method.invoke(Native Method)
         at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:636)
         at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:621)
         at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:359)
         at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
         at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
         at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:468)
         at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:209)
         at $Proxy8.load(Unknown Source)
         at weblogic.management.mbeans.custom.ApplicationManager.poll(ApplicationManager.java:840)
         at weblogic.management.mbeans.custom.ApplicationManager.poll(ApplicationManager.java:733)
         at weblogic.management.mbeans.custom.ApplicationManager.update(ApplicationManager.java:206)
         at weblogic.management.mbeans.custom.ApplicationManager$ApplicationPoller.run(ApplicationManager.java:1050)

    Michael,
    This is a problem with 6.1 SP2 also -- a very annoying error. Without auto deploy
    working properly, developers are spending alot of time waiting for WebLogic to restart.
    HELP!!! we need this fixed.
    I see the EXACT same stack trace (ERROR).
    Tom Markel
    Sr. Java Engineer
    Michael Young <[email protected]> wrote:
    Hi.
    This may be a known issue that was addressed in sp2. If you are not already
    at that sp level I suggest you upgrade.
    Regards,
    Michael
    David Ventimiglia wrote:
    Hello,
    Weblogic 6.1 throws a FileNotFoundException about 10% of the time forme when
    auto-deploying a Web app. Has anyone else run into this? I searchedthe newsgroups
    but didn't come up with anything, so I thought I'd start here.
    My build/deploy cycle is managed by an Ant build file that creates a WARfile
    of my web application and then drops it into $WL_HOME/config/mydomain/applications.
    Occasionally when I do this, I get the error shown below. OriginallyI was building
    the WAR file right in the ../applications directory, so I thought thatmight be
    an issue. So, I started building the WAR file in a staging directoryand copying
    it into ../applications. No luck. Next, I tried deleting the originalWAR file
    from ../applications, and THEN copying the new one over from the stagingdirectory.
    Still fails occasionally.
    Let's see. This is Weblogic 6.1 on Win2K. The only other thing is thatmy dev/build/staging
    environment is on a network share, and it's from there that I'm copyingthe WAR
    file to my local machine (where WL is running).
    If someone has seen and/or knows what is up with this, great. If not,it's not
    a show-stopper.
    Thanks!
    Cheers,
    David
    ========================================================
    <Apr 8, 2002 9:05:00 AM PDT> <Error> <Management> <IOException openingapplication
    mydomain:Name=private-banking,Type=Application, loading from path .\config\mydomain\applications\private-banking.war
    java.io.FileNotFoundException: error in opening zip file
    at weblogic.management.mbeans.custom.Application.findType(Application.java:1833)
    at weblogic.management.mbeans.custom.Application.adminLoad(Application.java:444)
    at weblogic.management.mbeans.custom.Application.load(Application.java:387)
    at java.lang.reflect.Method.invoke(Native Method)
    at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:636)
    at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:621)
    at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:359)
    at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
    at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
    at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:468)
    at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:209)
    at $Proxy8.load(Unknown Source)
    at weblogic.management.mbeans.custom.ApplicationManager.poll(ApplicationManager.java:840)
    at weblogic.management.mbeans.custom.ApplicationManager.poll(ApplicationManager.java:733)
    at weblogic.management.mbeans.custom.ApplicationManager.update(ApplicationManager.java:206)
    at weblogic.management.mbeans.custom.ApplicationManager$ApplicationPoller.run(ApplicationManager.java:1050)--
    Michael Young
    Developer Relations Engineer
    BEA Support

  • Deploy to single managed server checked and greyed out while performing upgrade to EPM 11.1.2.4

    Hi Gurus,
    We are trying to upgrade EPM from 11.1.2.2 to EPM 11.1.2.4 and have applied the maintenance release successfully.
    Issue:
    When we are trying to configure EPM 11.1.2.4 and are providing the same Shared Service database details, at the summary screen, we are not able to uncheck the option "Deploy to Single Managed server" which is checked and is greyed out.
    We have tried the following:
    1. We updated the HSS_COMPONENT_PROPERTY_VALUE table  and updated the PROPERTY_NAME "isCompact" to false.
    2. Modified the config.xml file located at EPMSystem/config and epmsystem1/config to remove the property for compactState.
    We are still having the issue where we are not able to uncheck the option for Compact Deployment. Any help would be appreciated.
    Thanks in advance.

    As it is a maintenance release and it deployed as a single managed server then you will not be able to change the deployment type when applying the maintenance release.
    There is a procedure to change a deployment type from compact to single managed server that I created as an internal document.
    you may want to give it a go but you would need to test this first as this was an in house test that I carried out.
    Hyperion Planning - Version 11.1.2.2.300 and later
    Information in this document applies to any platform.
    Goal
    The scenario:
    EPM system 11.1.2.3 was configured and deployed as a single managed server compact deployment so that only one JVM was used for all products EPMServer0.
    Later on, due to performance issues, the decision was made to go for using a JVM for each product and get rid of the compact deployment.
    The administrator went ahead and redeployed the application servers individually into their own JVM.
    However everytime the webserver is reconfigured, the weblogicCluster entry in the OHS file mod_wl_ohs has 2 servers, one for EPMSserver running on port 9000 and another server running on the product default port (as if it was being load balanced)
    The aim:
    It is clear that initial compact deployment has not been cleared from the EPM environment and the aim in this exercise is to clear the registry and the file system so that the compact deployment is removed fromthe EPMenvironment and we are left with the desired configuration Single JVM deployment for earch web application.
    Solution
    Caution:
    Make sure that you take a backup of the following:
    - TheFoundation Services database schema backup
    - Take a backup of the following folders:
    \Oracle\Middleware\user_projects\FOUNDATION1\httpConfig\ohs\config\OHS\ohs_component
    \Oracle\Middleware\user_projects\domains\EPMSystem\servers
    \Oracle\Middleware\user_projects\domains\EPMSystem\config\fmwconfig\servers
    Disclaimer:
    This was tested in House and it worked for this specific environment and it may not work for your environment. So the suggestion is to test first in a development environment and make sure that you take the appropriate backups in case it does not go according to plan.
    Use at your own discretion.
    Procedure:
    1- Run the epmsys_registry to generate the Registry report
    2- Search through the report for the word applicationServerDeployment with a corresponding value of configured and take the ObjectID number down for any entry of applicationServerDeployment that has a value of Configured
    i.e:
    Instance Tasks Configuration (INSTANCE_TASKS_CONFIGURATION)
    Object ID:   e4b3a86a82c26941S32ef81a1455fe48473S7adf
    3- use the object ID of each entry you have taken down throughout the Registry HTML Report to manually set it back to Pending using the following procedure:
                    Start a command prompt and set the working directory to
                     \Oracle\Middleware\user_projects\epmsystem1\bin
                    run the command:
                     epmsys_registry.bat updateproperty #e4b3a86a82c26941S32ef81a1455fe48473S7adf/@applicationServerDeployment=Pending
                    Repeat this command for each ObjectID that has its applicationServerDeployment
                     property set to Configured
    4- rerun the epmsys_registry.bat to generate the Registry HTML report and search for applicationServerDeployment in the newly generated report to make sure that they are all set to Pending and there none missed (very Important).
    5- Search the registry HTML report this time for EPMServer0 which is the default serverName given to the single managed server deployment (there will be multiple entries)
    Take note of the first ObjectID entry in the section header: for example
    WORKSPACE_WEBAPP (WORKSPACE_WEBAPP)
    Object ID:   e4b3a86a82c26941S32ef81a1455fe48473S7bd3
    - Start a command prompt and set the working directory to
                     \Oracle\Middleware\user_projects\epmsystem1\bin
    - run the command:
                     epmsys_registry.bat view #e4b3a86a82c26941S32ef81a1455fe48473S7bd3
    -Note the Parents ID in the output:
    For example:
    Parent 1
    NAME -  WORKSPACE_LWA
    ID -  e4b3a86a82c26941S32ef81a1455fe48473S7bd0
    TYPE -  LOGICAL_WEB_APP
    Parent 2
    NAME -  HOST:BACHVMPS3TR
    ID -  e4b3a86a82c26941S32ef81a1455fe48473S7ffe
    TYPE -  HOST
    - Note the single child ID:
    For Example:
    Child 1
    NAME -  WebLogic 10
    ID -  e4b3a86a82c26941S32ef81a1455fe48473S7fd6
    TYPE -  APP_SERVER
    Now run the following command to remove the Link between Parent and child:
    epmsys_registry removelink #parentObjectID #childObjectID
    In this example that would translate to:
    To remove the single child1 link to the WORKSPACE_WEBAPP (#e4b3a86a82c26941S32ef81a1455fe48473S7bd3 ):
    epmsys_registry removelink #e4b3a86a82c26941S32ef81a1455fe48473S7bd3 #e4b3a86a82c26941S32ef81a1455fe48473S7fd6
    And do the following To remove the link between WORKSPACE_WEBAPP (#e4b3a86a82c26941S32ef81a1455fe48473S7bd3 ) and Parent1 and Parent2:
    epmsys_registry removelink #e4b3a86a82c26941S32ef81a1455fe48473S7bd0
    #e4b3a86a82c26941S32ef81a1455fe48473S7bd3
    epmsys_registry removelink #e4b3a86a82c26941S32ef81a1455fe48473S7ffe
    #e4b3a86a82c26941S32ef81a1455fe48473S7bd3
    - Now that the link has been removed, delete the WORKSPACE_WEBAPP component using its ObjectID :
    epmsys_registry deletecomponent #parentObjectID
    In this example:
    epmsys_registry deletecomponent #e4b3a86a82c26941S32ef81a1455fe48473S7bd3
    - Delete also the Parent representing the WORKSPACE_LWA
    epmsys_registry deletecomponent #e4b3a86a82c26941S32ef81a1455fe48473S7bd0
    Note:So we have now deleted the WEBAPP and LWA for workspace.
    6- Repeat steps in section No 5 for every WEBAPP with EPMServer0
    7- Start the Weblogic admin console and login
    Then go to the left panel and Expand Environment -> Server
    Click on Lock & Edit -> Select EPMServer0 -> click on Delete and confirm
    Activate Changes and Log off
    8- Stop the weblogic admin console server
    9- Go to the following location and delete the folder EPMServer0:
    \Oracle\Middleware\user_projects\domains\EPMSystem\servers
    Delete also EPMServer0 from the following location:
    \Oracle\Middleware\user_projects\domains\EPMSystem\config\fmwconfig\servers
    10- Start a command prompt and delete the Windows service that was created for EPMServer0 (if using Microsoft Windows Operating System):
    Right click on the service 'OracleHyperion EPM Server - Java Web Application (epmssystem1)' and get its service name i.e: HyS9EPMServer_FOUNDATION1
    Run the following command: sc delete HyS9EPMServer_FOUNDATION1
    11- Launch the EPMSystem configurator and redeploy the web application server to their own JVM
    12- Go to the following location \Oracle\Middleware\user_projects\FOUNDATION1\httpConfig\ohs\config\OHS\ohs_component and rename the file mod_wl_ohs.conf to mod_wl_ohs.conf.old.
    13- Copy the unconfigured mod_wl_ohs.conf file from the location C:\Oracle\Middleware\ohs\ohs\conf to the location \Oracle\Middleware\user_projects\FOUNDATION1\httpConfig\ohs\config\OHS\ohs_component
    14- Run the EPM System Configurator again and configure the WebServer to reconfigure the OHS configuration file mod_wl_ohs.conf.
    Once done then open the mod_wl_ohs.conf file and make sure that there are no servers configured with Port 9000.
    15- Start the services and test the workspace

Maybe you are looking for

  • XML BURSTING PROGRAM

    Hello All, I have customized an oracle application program with xml publisher.The program prints the report in PDF format. My questions is where this output copied in the server .I am not able to find the pdf report in $APPLCSF/out/. Do i need to use

  • Can you use two ipads with one itune account

    We have two ipads and one Itunes account.  Are we able to have separate accounts within iTunes so my husband can have his games on his account and I can have mine?

  • Xsql pages not displaying properly

    Hi, I have downloaded & installed the XSQL Servlet as mentioned in the document. I have apache web server with apache jserv. Also I have the access DB & for the example (helloworld.xsql) below am using "Student" data source name & "Contact" table nam

  • Issues with updating software

    I have (2) 9810 Torch's about 18 months old. Mine works and updates fine with no problems. My wife's phone however will not update using the desk top software and sometimes will display an error msg concerning an app failure. I've tried numerous time

  • Monitoring PRi's with snmp traps

    I am looking to monitor when my pri's go down and generate a trap. Is this the best way: snmp-server enable traps isdn layer2 or are there some other traps that I can enable? Thanks,