Auto GR not posting in CO12 Mass Confirmation Screen

Dear All,
I m using Auto GR control Key PP03, But while doing mass confirmation operations are getting confirm but Auto GR is not taking place , but if I do the confirmation using CO11N auto GR is posted, please let me know the reason i want to do auto GR in CO12.
Regards
Nishj

Hi Nishj,
Please check in production order, in header there is an Total quantity & then check operation tabs there is a operation qty. in your case these two should be different. yield is your operation quantity & gr comes in goods movement tab depends upon the ratio of total & operation quantity, Operation quantity is comes different because of operation scrap , so check it, it should be in routing operation.
And also try using COGI t-code so that you can find the reason for that OK.
I hope it helps you any questions please revert me back.
Regards,
Madhu.G
Edited by: madhu333mac on Jan 17, 2012 6:22 PM

Similar Messages

Control to not posts costs during activity confirmation

Hi PS gurus
Is there a way in config to prevent costs to be booked while confirming an activty through CJ20n transaction
i want the costs to be booked only through CATS and not through any other transaction
Is it possible. I couldnt find any config to control this???
Amit

Yes definately. Planned cost will be zero for that activity. For tracking plannined cost he has to do manual plannning inn WBS Elemetns or in some other exteranl activity where material planning filed.
I do have some other ideas. Fundamnetally not complementing each other so I have not sahred here. Just sharing someone can check. As CATS and manual confirmation CJ20n both are confirmation so both will not work out, but stilll some doubt for option 1 in my mind.
1. In activity set cotrol key confirmation not possbile and see how system behaves while doing confimration from CJ20n and CATS
2. Remove Costing tick from control key and check how system behaves in CATS perticularly
With Regards
Nitin P.

By product not getting posted to stock while confirming the order

Hi PP gurus,
I am facing a problem. The scenario is : My client is running foundry for manufacturing castings. In case a) He gets pattern as a free issue material from the customer for manufacturing casting. In this case he charges only the rework charges from . In this what need to be done: My doubts are:
1) What type of material should the pattern be made( free issue material or HALB) because for free issue material i cannot make a routing.
2) How the above process of charging only the service fro customer be carried out.
3) If i make the BOM of casting as Pattern as one line item & Used pattern as a by product whose value is negative. When i confirm the production order for casting only casting comes to stock , the by product doesnt come to stock.
What should i do.
I really need help for these queries. Whoever answers i will give him 10 points.I am at client site i need a quick solution to it.
Regards
Ashish Khurana

Hi Ashish,
When you confirm the prod order for the fert, the fert material will be posted the unrestricted use stock & to move the byproduct ie p003, you have to use the 531 movement.
use migo, GR , enter the reservation no. (you can get the reservation no. form the prod order of the FERT). & then 531 mvnt,
After this byproduct will be posted.
Also ensure that "clear open reservations" indicator is not selected when you do confirmation of the prod order.
Regards,
SDs

Quantity not posted to object error in while activity confirmation

Hello All,
i am getting below error while activity confirmation , please help me on this below.
Note : Activity and cost center and KP26 no changes are made compare to preview year and current year , for the fiscal year 2014 i didn't get any error , only for the fiscal year 2015 i getting below error.

Dear Hari,
If the activity type of the confirmation has set the flags as
mentioned (indicator MANIST in table COKL is set) the system will simply
NOT post any quantity on the sender cost center/activity type during
the confirmation.
So all quantities which are currently missing (as these were not
updated by the confirmation) must be posted with transaction KB51N.
If you implement the coding corrections of #760437 you have the
possibility to change the message BK263 from "I" to "A" in transaction -
which is however not recommended.
So the advised procedure is:
-post all mising quantities with transaction KB51N first
-then run the report ZRKMANIST_RESET to remove the flag MANIST (which is
the reason why the confirmations did not post quantities on the
sender cost centers)
After this procedure, the quantities will again be updated when you
post confirmations.
Best regards,
Jason

Confirmation reversed Using T code CORS, goods movement not posted

Hollo Everybody
i am facing a problem pl help me. I have posted a corfimation by TCODE CORK , and subsequently reversed by CORS.
while forward goods movement posted the reversal did not posted against the Process order. it is not appering in COGI listing.
I can't close the process order. pl guide me to post the unprocess reversal.
Regards
Debashish

Dear Debashis,
Kindly check the material movements in MB51. Enter the date of confirmation as well as confirmation cancellation as selection criteria. Please carefully see all the movements .
Then analyze which movements are not reversed.
And in CORT -Display confirmation You can see the "Cancel" indicator ticked or not for the confirmations you need. If the confirmation reverse is successful then this indicator must be ticked there automatically by the system.
Regards,
Girish

Episodes do not auto-download even though I receive email confirmation they are ready. 'Check For Avail. Downloads' says all available are already downloaded. Signed in properly on an authorized machine.

episodes do not auto-download even though I receive email confirmation they are ready. 'Check For Available Downloads' says all available are already downloaded. Signed in properly on an authorized machine. Can anyone explain this? Give directions to fix?

Thank you for the reply. These are not, however, past purchases; these are fresh episodes of purchased seasons. For instance, I receive an email that a new episode of Elementary is ready for me to download. When I check for available downloads, though, I am told there are none. So these are not previous purchases that I am trying to re-view or download again. These are fresh items for which I have paid but which I appear unable to access unless, perhaps, I were to re-purchase them. Grrrrrr.

Mass Confirmation

My requirement is - for many order while confirmation -
1)Auto confirmation (Not necessarily mass confirmation)
2) Errors to be highlighted (Order with error,material no in error & description of error, error log)
3) No COGI generation
4) Should be able to run in backround
5) Part confirmation should be possible
6) Collective order scenario is there
I am able to achieve this by CO11.
In CO11, I have blocked the COGI generation. All the above 6 points are met.
Point is I want to do in mass say.
If I use - COHV - it is not supporting part confirmation and taking me to COGI for errors
CO12 is also taking me to COGI for errors
How to achieve the above 6 points for using CO12 and COHV functionality?
Can anyone help me on this?
Thanks in advance,
Srini

Hi Srini,
Check out this BAPI "BAPI_PRODORDCONF_CREATE_TT", it might be of interest to you.
BR,
UK

Video's are missing and can not post any video's and can no longer see on Facebook after upgrading mac software. Facebook says content is unavailable. Is this a facebook issue or is there something that I can do to fix on my mac.

Video's are missing from facebook album under photo's. It shows that I have 99 and only shows 24. These are not copyright problems. I have had them up for years. Now, I can not post any video's too. Message says that content is currently unavailable. It seemed to happen after I upgraded to 10.7.5 but it could be coincidental. Of course, I have not got any email from facebook to help with this problem and I am really frustrated that I can not find my video's and post any new ones anymore. Any help would be appreciated.

I would like to add that Comcast is my internet provider. Perhaps that is part of the issue although the Connection Doctor confirms the mail box is connecting to the internet. No other function processes when Connection Doctor program is used to find the source of the issue. I have read forum posts but am unable to find a way to get my Apple mail to be delivered to my computer. It worked fine up until I chose to transfer mail to the Cloud. My mail account is a .mac account.
Still hoping someone out there can help me.
thanks,
anne

Exchange rate gain /loss is not posted in the contract

Hi Sap People,
Exchange rate gain /loss is not posted in the contract(cashflows). This is w.r.t SAP Banking Module.
The open items are posted with a certain exchange rate in the contract at the time of disburesment,while clearing thru FF68(incoming payment) with a new exchange rate the items
are cleared with the same exchange rate and the Exchange gain/loss is posted as zero.
Regards
Ravi

Hi,
Check the exchange rate type for the disbursement. It is M for FF68. Check in configuration the exchange rate type. Also check the exchange rates maintained in OB08 for this exchange rate type and confirm if there is any difference.
Is it Loans module?
Regards,
Ravishankar

Auto more not working

Hello all,
From the ECB IT dept, having an issue with a users 8800. When the user views emails, it only displays the the first part, to view the rest user must click on more all. Did some research and found out about more all, set the user blackberry to have yes on auto more. When the user is still not bale to view the entire message with out clicking on more all. I did a reset on the hand set, wiped it and the auto more does not seem to work.
Am I miss understanding the auto more function? Or am I missing a step?
Any help of ideas or info would be grateful.
Thanks

This is a user to user support forum and not Apple employees so it is best to not post your email address in an open discussion group.
Have you tried a reboot of the iPhone? Hold both the power and home buttons until the apple logo appears and it restarts, ignoring the red slider if it appears.
My iPhone went to full brightness all the time after updating to iOS 6.1.3. A reboot seems to have helped make it work as it should. Also check Settings > Brightness and Wallpaper and see how it is set, reduce the brightness level it is too bright for you.

Outbound delivery PGI getting done though GR not posted

Hi Experts
I have an issue wher in the process is
SO is created then a PR is automatically created for the SO , this PR isconverted to PO then GR is being done . Now once there is a GR an outbound delivery is created automatically via jobs using the program RV50SBT1 ,
My problem is when i create a GR on current date and have the posting date as in a future date , I am able to create an outbound delivery and even able to do the PGI
Could u please let me know if this standard SAP , because i think this should not happen , until the GR is not posted the PGI should not get posted
Regards
Ramakanth

Hi Raja
The actual process is
A slaes order is created for a plant and scheduled lines are confirmed this generates a PR automatically for the same plant , this is converted to the Po for the same plant ,Now consider there are 10 qty all the documents , i recieve an order acknowedgement is updated in the PO
when i do a partial GR in the system this creates the delivery for the same qty (say qty 3) i.e 1Delivery for 1 GR till the order acknowledge ment date but after the order acknowledge it is creating only 1 single delivery for all the rest qty after the order acknowledge date
Please let me know if i an clear
We are using the program RV50SBT1 for creatin the deliveries
Regards
Ramakanth

Mass confirmation TO after PP. There are no TRs. HUM activated : 1HU = 1TO

Hi,
Thanks in advance for help.
We have activated HUM and WM for one of our Finished Goods Store.
Finished Goods will come from PP directly to that location.
As we have HUM, hence no Transfer Requirements(TR) are created.
Transfer Orders are created directly and immediately as soon as
Handling Units are confirmed from PP.
Transfer Orders are per HU, i.e. for one Handling Unit we will have one
TO created. And there are pallets, one pallet equals one Handling Unit.
1 Pallet = 1HU = 1 TO.
This gives many of open Transfer Orders at a given time.
Is There transaction for Mass confirmation of Open Transfer Orders?
The transaction for confirming Group is available, but then the Group
cannot be created of Transfer Orders.
Please suggest stpes if - we want to confirm Transfer Orders in Mass.
Thanks & Regards,
Ravi Davda

Old posting but just in case: You can use Warehouse Activity Monitor. It needs to be configured but has a mass confirm/cancel option.
Thanks,
Abdul

Error "Application document not posted" when tried to receive an idoc

Hi All,
My scenario is File to IDOC. the idoc reaches the R/3, but when i check in the transaction we02, under Inbound IDOCS, i see my idoc in status 51 - Application document not posted.
Does it mean idoc has reached R/3, but it didnt update the respective table in R/3? i'm sending idoc of type MATMAS05, its supposed to update table MAKT, but its not. Do i need to make any special settings for this? pls help me, its urgent.
Thanks & Regards,
Bhavana

Hi,
The IDOC is successfully coming from XI, but there is problem in R\3 end.
Idoc status is 51 with "Application document not posted"
This indicates that the logic for posting the application document is not coded properly in inbound function module. Verify the logic once again.
Also you need to confirm that the data related or in application configuration is right. If the data values are not correct the above error get generated.
refer blow link for the program
http://help.sap.com/saphelp_nw04/helpdata/en/78/21760251ce11d189570000e829fbbd/frameset.htm
Thanks
Swarup
Edited by: Swarup Sawant on Jan 28, 2008 11:13 AM

Idocs statsu 51 Application document not posted

Hi All,
We are having an issue with orders having large number of line items in which Shipping confirmation Idocs coming from warehouse are going to status 51 (Application document not posted) when we look at the status record it shows "Object requested is currently locked by user" . This issue started happening after the ECC 6.0 upgrade.
Please advice for the same.
Thanks

Dear Abid,
Did you try to search the Forum? There are lots of threads regarding this..... Please use the search option of the forum and you will get lots of material which may further enhance your knowledge.
Check this thread....
Object requested is currently locked
Thanks,
Raja

Idoc number have status is 51 Error: Application document not posted

hi friend
i have error in idoc number status 51 Error: Application document not posted. basic type is ORDERS05 Purchasing/Sales
what i do for solve this issue
with regards
dinesh
Edited by: code acess on Feb 9, 2011 4:35 AM

Hi,
{1.how i check in the delivery documents have idoc number ? }
Go into the delivery, output. Check if any output has been triggered for EDI. If yes, then select the output and click on 'Process details' (it is the button just after communication where you give the print name). It will display the Idoc number.
{ what are the required for cofiguration of EDI. Pls Send me the configuration setting . i didnt have help here ..iam expecting configuration setting }
Though it is difficult to share all the config settings in this thread, what I will do is to put in a few steps which are general settings. Only a few things vary.
For EDI / ALE - Idoc the common settings are
a. The port should be enabled for sending and receiving the data thru Idocs. Usually basis does this.
b. Partner profile should be configured in WE20. Example if you are sending a sales order confirmation to ship to party then, You should set up a partner profile in WE20 for partner number in KU (Customer) folder. You can copy any of the existing customer. What you have to make sure is you have added the message type and the Basic Type in the outbound parameters of the partner in WE20. Also, you have to make sure that you are giving the output type and the process type as well.
This is same even when you are receiving the Idocs from customer. Say for example customer PO. However, instead of outbound, you will add all these details in inbound.
Similarly, if you are sending PO to your vendos, then, you have to make changes in folder for partner LS. There are so many other folders as well.
Check WE60/61 for the documentation for what is Basic types, Message types and segments. It is very important for you to know about these when you are dealing with Idocs. To start with, you can give Orders01 in Basic types in WE60 selection screen and read out the details.
c. Once the partner profile is set up, there is a table called VOE4. This is the table where you can maintain the customer cross reference for incoming idocs.
d. Output type should be set up for EDI trigger (Tcode NACE) . You can use the existing programs. You can Check BA00 which is normally set up for EDI trigger as well. You can try triggering that first. You may get some errors at first. But do not panic. Just read those errors and then search the form for errors. You will get to know the next step.
e. Once you have the above settings, I think you are pretty much ready for EDI... you can try these. If you get struck in between, the form is there to help you...
Hope this helps...
Regards,
Mukund S

Auto GR not posting in CO12 Mass Confirmation Screen

Similar Messages

Maybe you are looking for