Auto_home map not shared to client?

Hi,
We would like to cross-mount home directories the same way we've had it working on Linux/Solaris for years. Reading the recommendations here and elsewhere we realized early on that NFS was the way to go.
The good news is that I have everything working when I edit files directly both on the client and server, but of course I'd like Leopard server to provide all the information through Open Directory.
I have added home directory entries in /etc/auto_home on the server, and if I put the actual home directory on one of the clients I can access them on the server.
However, the clients don't appear to see this map (auto_home) from OpenDirectory? Do I need to enable it in some special way, or edit other files/settings?
Cheers,
Erik

You need to nest it under the cn=automountMap key and use automount objects:
ie:
dn: automountMapName=auto_home, cn=automountMap, dc=myserver,dc=com
objectClass: top
objectClass: automountMap
automountMapName: auto_home
n: automountKey=tuser, automountMapName=auto_home, cn=automountMap, dc=myserver,dc=com
objectClass: top
objectClass: automount
automountInformation: myserver:/export/home/tuser
automountKey: tuser
dn: automountKey=xtuser, automountMapName=auto_home, cn=automountMap, dc=myserver,dc=com
objectClass: top
objectClass: automount
automountInformation: myserver:/export/home/xtuser
automountKey: xtuser
You might have to add the auto_master the same way.
This setup will work natively with redhat linux, Sun Solaris you need to do search mappings
because it expects there to be an automountMap container off the the root search tree.
Message was edited by: soulsurf

Similar Messages

RSA1 not shared between clients

hi experts,
on our BW 3.5 DEV server, we have 2 clients (310,410).
the problem appears when I log in 410 and I execute rsa1, the system posts the following message you can only work in customer 310.
how can I execute rsa1 in the 410?
thank you in advance

Hi,
Go through links:
ERROR : You can only work in client 900
A question about RSA1
Re: client creation
Re: BW can have multiple client?
Best regards,
Eugene

How to change the 'Default operating mode' of a mapping on the repository and not from the client

Hi everybody,
I am using OWB 11.2.0.3 and under the mapping's configuration property, I have the necessity to change the Run time parameter "Default operating mode" to SET_BASED in almost all my mappings.
Because I have 745 mappings in which the Default operating mode is different from SET_BASED, instead to open 745 times the 'Configure' and update manually the value, is there a way to update safely these values (with an oracle predefined script) directly on the repository ?
I know that exists a view called CMPSTRINGPROPERTYVALUE_V based on a table called CMPSCOPrpClasses, but changing this table it's very complicated for me because contains only keys and then I don't know in which way is connected with all the other structures....
If somebody knows a method more efficient to do these updates on the repository and not from OWB client I will appreciated it!
Thanks in advance
Alessandro

Urgent... help!!! Thanks
in short, my server log says transaction access mode is "read only", so my calling home.create() always triggers a transaction rollback. How to change the access mode to "read write"?
Is possible to work out through one of the descriptor files? Or ini settings of the underlying pointbase database? Or any other way around?

GL Account/Product category mapping not working in transported client

We have implemented SRM 5 and an Ecc 6.0 backend.
We have transported the GL Account /Product category mapping config from the DEV client to the Quality client. In the quality client we run BDLS to set the correct backend system for the GL account/product category mapping.
When we create a shopping cart, GL accounts are not determined. We have noticed that in table BBP_DET_ACCOUNT, the backend system is still pointing to the DEV client backend system not the quality client backend system. Why is this?
Do we have to always manually reset this config in every client that we transport this table if we have new or changed entries?

Hi,
See this related threads:
Re: Client Copy SRM from prod to dev -Urgent
product category creation and g/l account assignment updation
BR,
Disha.
<b>Pls reward points for useful answers.</b>

Selectable map not saved in fillable PDF form file

Hi all, I have a problem with a document (it's a book for children) which has been created using InDesign CS6 on Macintosh. I need to make a fillable form (which is not a problem) and I have applied the "Extended Features for Acrobat Reader". I guess the client uses Acrobat Reader for Windows.
The problem comes when the client asks me to include a map where the pupils can select the countries, and that I have solved using buttons that show/hide these countries. It works fine, but when the client fills the form and saves the document, the map doesn't save the selected fields.
How can I make it work properly? I also tried creating a "SAVE MAP" button, but unfortunately, Acrobat only applies this feature to the current state when I create the document, NOT when the client clicks on this "SAVE MAP" button. Is there another solution, please?
And there's still more... In another page, the pupils must select 5 words, and the problem remains the same... the selected fields are not saved.
I hope I've explained myself correctly, I know it's a bit confusing.
Thanks in advance!!

If you will be adding up the mileage reimbursement amounts you might need to round the result of the calculation to 2 decimal places and that will require a custom JavaScript calculation. Using unrounded values can result with an answer that does not add up to the displayed value.
Using the simplified field notation also requires that field names meet a very specific format. The field names need to start with an alphabetic character and it cannot have any white space character in the name unless some additional coding is done. These restrictions are a result of processing the formula string with JavaScript and how the data string is parsed for processing.

User does not exist in client 900,

Hi All,
I am getting a user mapping error in my Fixpack1 setup and I have looked all over and cant see where I am going wrong.
The error I see in SRUTIL on my SCL is: User ess\domass does not exist in client 900
I have checked and completed the setup: /IWFND/WSS_SETUP and am sure my WS Security options are correct.
I configured the user mapping using SIMGH but had to update the entrys in SM30 but VUSREXTID looks to be set with the correct mapping of the problem account: SharePoint::ess\domass
I have checked in SE16 and table /IWFND/V_C_ISSUR has the correct Sharepoint config: SHAREPOINT_INT - SharePoint - CN=SharePoint Security Token Service, OU=SharePoint, O=Microsoft, C=US
The settings in LDAP are correct and I am connecting to my ADS OK.
I have checked the ISSUERH field in table USREXTID and that does have data inside it but when I delete that data as instructed from other SDN posts this does not make a difference to my connection.
Is there something else I can check?
Many Thanks
Mike

Hi Mike,
I haven't seen this error before. It almost sounds like the user mapping is by-passed all together.
There is one more place you should check. Go to SAML2 and verify the following:
Trusted provider tab --> Secure Token Service --> select SharePoint --> Identity Federation tab:
Here you should have one entry called 'Unspecified' and the setting for 'Details of NameID Format' should be set to 'Mapping in USEREXTID table'.
Cheers, Alex

Auto-mapping of shared mailboxes in a resource forest scenario

In a resource forest scenario you assign full access to a shared mailbox using:
Add-MailboxPermission -Identity SharedMailbox -User AccountForestDomain\UserID -AccessRights FullAccess
This provides the user in the account forest full access, but it will NOT auto-map the shared mailbox in Outlook.
If you use the command:
Add-MailboxPermission -Identity SharedMailbox -User UserID -AccessRights FullAccess
and UserID is the disabled account of the linked mailbox in the resource forest then the user in the account forest does not have the necessary permission to
open the mailbox, but the auto-mapping of the mailbox in Outlook works.
You have to use both commands to have the auto-mapping feature and have access to the shared mailbox.
This looks like another issue of the auto-mapping feature. The intention of the feature is good, but the way it was implemented can be improved.
How do you configure full access to shared mailboxes in a resource forest scenario?

Hi J-H,
Because i don’t have such a lab environment, so I am unable to do a test.
Now let’s separate the issue.
1. The first issue is
[email protected]
unable to auto configure outlook profile.
I suggest you
changing the user’s attributes in the account forest, does it work?
2. The second issue is
[email protected] unable to open a shared mailbox in the resource
forest.
At first, I suggest you create a shared mailbox in resource forest with this command.
New-Mailbox -name
<name> -Database <Database name> -OrganizationalUnit Users –UserPrincipalName
<UPN value, example: [email protected]> -<ResourceType: Room, Equipment or Shared>
Managing
Resource Mailboxes in Exchange Server 2007 (Part 1)
Then test if you can log on the shared mailbox via outlook.
If yes, then grant full access right for
[email protected]
to [email protected]
Resource:
Shared mailbox
permission in resource forest with linked users
Manage Full Access Permissions
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Alternate Access Mapping not working for Zone : Intranet

One of our client want to set Alternate Access Mappint (intranet) with url "intranet.theirDomain.com" with local IP address.
is it possible?
subsequest to my previous question (
http://social.technet.microsoft.com/Forums/sharepoint/en-US/3f39711e-301a-40e8-aa7a-855fa2c268b1/alternate-access-mapping-not-working?forum=sharepointadmin )
I want to ask one more question
Can we configure "intranet.theirDomain.com" with local IP address for any other zone?
or
If there is ".com" within the url then it can't be configured for InTRAnet?
Thanks
S H A J A N

The names for the zones don't matter. You could use the 'extranet' zone for another intranet name if you wanted, the names are just to make it a bit more friendly for beginners.
What you describe sounds routine, you create a web application with a name, then use an AAM to allow users to access it with a more friendly name. Frequently you end up creating
http://intranet.domain.com and
http://intranet as an AAM, or vice versa.
You can use .com for an intranet site, you would need to add the site as an A Host record in your DNS server so that traffic is sent to your internal server rather than out into the wider world.

TNS-12518: TNS:listener could not hand off client connection

All,
I am getting the below error while connecting the db from client.it is a shared server and also have enough free memory.
The db version is : 9.2.0.6
TNS-12518: TNS:listener could not hand off client connection
TNS-12547: TNS:lost contact
TNS-12560: TNSrotocol adapter error
TNS-00517: Lost contact
Solaris Error: 32: Broken pipe
Please suggest me on this to avoid the issue.

When was last time SQL*Net worked?
What changed since then?
Solaris Error: 32: Broken pipeError occurs at Operating System level & Oracle is the victim.
What clues exist in the messages file?

Qmaster error: shared storage client timed out while subscribing to...

Here's my Qmaster setup:
computer 1: CONTROLLER, no nodes
- 8TB RAID hooked up via Fiber
- connected to the GigE network switch via a 6-port bond
- cluster storage set to a path on the RAID
computers 2, 3, 4, 5: RENDER NODES
- each computer has a 2-port bonded connection with the GigE switch
computer 6: Client, with FCS2 installed.
- connected with a single GigE link
I have set up this cluster primarily for command-line renders, and it works great. I submit command-line renders from the client computer, which get distributed and executed on each node. The command line renders specify a source file on the RAID, and a destination path on the RAID. Everything works great.
I run into trouble when trying to use Compressor with this same setup. The files are on the RAID, and all my computers have an NFS automount that puts it in the /Volumes folder on each computer.
I set up my Compressor job and submit it to the cluster. It submits sucessfully, and distributes the work. After a few seconds, each node gives me a timeout error:
"Shared storage client timed out while subscribing to [computer1.local/path to cluster storage]"
Is this a bandwidth issue? Command line renders work fine, I can render 16 simultaneous Quicktimes to the RAID over NFS. I don't see much network activity on any of the computers when it's trying to start the Compressor render, it's as if it's not even trying to connect.
If I submit the SAME compressor job to a cluster with nodes ONLY on the controller computer, it renders fine. Clearly the networked nodes are having trouble connecting to the share for some reason.
Does anybody have any ideas? I have tried almost everything to get this to work. Hooking up each node locally to the RAID is NOT an option unfortunately.

WELL I DO NOW!
Thanks. it's taken 6th months and several paid 'professionals' and then you come in here...swinging your minimalist genius. one line. one single line. and its done.
if you are in london, lets lift a beer or five together.
thank you sir. thankyou!

Shared storage client timed out error

Hello everybody, please help
I have been at this now for about 2 days and still can't find out the source of my issue using FCP to render a project through compressor to multiple macs using Qmaster.
What is happening is that I start the render and it gets sent to the second computer, I can see the prosessor ramping up then after (+-) 30 seconds I get the error bellow, and the render fails.
Here is my set up:
MacBook1 as the cluster controller
Macbook2 as the service node
connected via a gigabyte switch using an ethernet cable
The error I keep getting is this ("Macintosh-7" is the name of MacBook1, "chikako-komatsus-computer" is the name of MacBook2):
3x HOST [chikako-komatsus-computer.local] Shared storage client timed out while subscribing to "nfs://Macintosh-7.local/Volumes/portable/Cluster_scratch/4AD40699-B5BD6A1A/sha red"
The volume mentioned above in the error is a shared Fire wire drive connected to the MacBook1. It is have full read and write privileges to everyone. This drive is where the project file and all the source video are located. MacBook1 via the Qmaster system preferences is pointing to a folder "Cluster_scratch" on this drive.
I have been mounting this drive from macBook2 using the connect to sever option in the finder under Go menu. This method seems to only enable me to connect to this drive using AFP, is this my problem?
I have "allowed all incoming traffic" of the fire wall on the MacBook1
What is funny (not really) is that i can Compress a previously compiled video with the cluster If I don't go thou Final Cut Pro!
Any help with this would be greatly appreciated.
Thanks

I also administer a managed cluster with 6 machines, and have been using it successfully for almost a year now. But the only encoding that is submitted is directly through Compressor, never via FCP.
With QMaster, it sees a Quickcluster and a managed cluster the same way. While they are set up differently, the principle is the same, QMaster only sees services.
Exporting out of FCP to any cluster has always been slow. If you want to harness the power of distributed encoding, you could export a Quicktime reference file and take that into Compressor to be submitted to the cluster for encoding.

Network account public folders are not shared?

Ok - I have posted before... but I have done more looking and have confirmed:
When I log into my mac using a network account, my public folder is not shared for guest users. I have set the permissions for my Public folder: chmod -R 0777 /Public but this does not help - the share is not visible. I can only imagine that there is a config file somewhere... maybe accessible through netinfo? Does anyone have any idea?
Thanks,
Davod

Heh... no problem.
Well, I am the network administrator.
Since the network account(s) I am referring to are MS Active Directory accounts (opposed any other LDAP or OS X Server Open Directory accounts), there is no other NetInfo database other than what is local to the Mac workstation.
I don't know why Apple thought it was more secure to lock down file sharing like this. I say that because the alternative (that I have seen in practice anyway) is to have all users run as an admin account all the time. Then when users want to access a coworkers files over the network, they are sharing thier (admin) account passwords to do so. It just seems really backwards to me is all. Run as least privilege. I always thought that was computing 101.
Anyway, this question is expanding, because there are scenarios where a user will get external hard drives from a client, and plug them into thier Mac. THey may want to have a coworker access some of the files on these drives for assistance with the job or whatever... but the drives do not show up just as the user's public folder does not show up.
Has anyone had good luck using a Preferences Panel applet called SharePoints? It seems like it could help me to solve this sharing dilema...
Thanks...

URL iviews are not cached in client browser!!!

Hi All,
We have URL ivews of ASP.NET pages in our Portal Home page.
Those ASP.NET pages are located in MS Windows Server (IIS).
It takes long time to load the Portal Home page.
We set the Allow Client-Side Caching - Yes, Cache Level - Shared, Cache
Validtiy Period: 7.59.59 for all URL iviews.
For the Home page which contains all URL iviews Isolation Method
property is set to Embedded.
We set "Enable Content Expiration" - 8 Hours for the "Root - virtual
directory" in IIS.
When I browse those pages with the URL directly in IE (outside Portal).
It runs faster and returns with HTTP status code "cached".
All the pages including HTML are cached in client browser.
When I logged into portal all images, css and javascript files are
cached in the client browser but not the HTML content. It returns with
HTTP status code 200 whick means URL iviews are not cached in client browser.
Thanks
Thruna Shanmuga

Hi Thruna,
The only header which influences caching behaviour in your request is the 'Cache-Control: private' header, which afaik means that the page cannot be cached by a shared cache (such as a web proxy), but can be cached in a personal proxy such as the browser cache.
However the headers do not specify a specific expiration date which means that the browser cannot know how long the response can be cached and thus has to check validity every browser session. The most optimistic scenario would be that the browser checks if the cached entry is still valid by requesting the resource and adding a If-Modified-Since or If-None-Match header. The server could then respond with a 304 Not Modified, skipping sending the actual resource in the response body.
If you want the resource to be fully cached you have to give it an expiration date in the future. This has to be done in the IIS server, maybe through ASP tags in the page.
I do not know why the page is loading from cache in the non-portal scenario but I can only suggest that you make absolutely sure the cache item was not validated already in the session.
With kind regards,
Thijs Janssen

Outlook 2013-Calendar can access which is not shared.

Dear Support,
i'm facing a problem with outlook 2013.
my exchange server is 2010 and i have lots of clients using MS Office 2007,2010 and 2013.
from Outlook 2010 and 2007 i can not open a calendar of any other user without their permission with sharing.
But recently i installed Outlook 2013 for 3 client machine and from that i can see the calendar of any other user and they were not shared the calendar.
i can see the free/busy time as its permission came as default.
but from 2010 and 2007 its not possible and asking for permission as normal.
i got confirmation as its the feature of outlook 2013.
Now my problem is only one user can see another user calendar complete details(subject,location etc)which is not at all shared.i have added my account in same OU where that same user is sitting in the Active directory OU also.but i can not see the complete
details, can see only free busy.
please help me how i can find out this permission from Exchange?
i want to know how only one user can see all the calendar data and can not see from a Administrator account?
Thank you,
Najim.

Hi Winnie,
please find the below details from cmdlet.
first command is run for the user 2.(user who did not shared his calendar)
PS] C:\Windows\system32>Get-MailboxPermission User2 | fl user,accessrights
User         : NT AUTHORITY\SELF
AccessRights : {FullAccess, SendAs, ReadPermission}
User         : Domain\Domain Admins
AccessRights : {FullAccess}
User         : Domain\Enterprise Admins
AccessRights : {FullAccess}
User         : Domain\Organization Management
AccessRights : {FullAccess}
User         : Domain\******
AccessRights : {FullAccess}
User         : Domain\*******
AccessRights : {FullAccess}
User         : Domain\Exchange Servers
AccessRights : {FullAccess}
User         : Domain\Exchange Domain Servers
AccessRights : {FullAccess}
User         : Domain\Organization Management
AccessRights : {ReadPermission}
User         : Domain\Public Folder Management
AccessRights : {ReadPermission}
User         : Domain\User2
AccessRights : {ReadPermission}
User         : NT AUTHORITY\SYSTEM
AccessRights : {FullAccess}
User         : NT AUTHORITY\NETWORK SERVICE
AccessRights : {ReadPermission}
User         : Domain\Exchange Servers
AccessRights : {ReadPermission}
User         : Domain\Exchange Domain Servers
AccessRights : {ReadPermission}
User         : Domain\Delegated Setup
AccessRights : {ReadPermission}
User         : Domain\b***min
AccessRights : {ReadPermission}
User         : Domain\Organization Management
AccessRights : {FullAccess, DeleteItem, ReadPermission, ChangePermission, ChangeOwner}
User         : Domain\Exchange Trusted Subsystem
AccessRights : {FullAccess, DeleteItem, ReadPermission, ChangePermission, ChangeOwner}
User         : Domain\m*****an
AccessRights : {FullAccess, DeleteItem, ReadPermission, ChangePermission, ChangeOwner}
User         : domain\s****n
AccessRights : {FullAccess, DeleteItem, ReadPermission, ChangePermission, ChangeOwner}
User         : BUILTIN\Administrators
AccessRights : {ReadPermission}
User         : Domain\Enterprise Admins
AccessRights : {FullAccess, DeleteItem, ReadPermission, ChangePermission, ChangeOwner}
User         : Domain\Domain Admins
AccessRights : {FullAccess, DeleteItem, ReadPermission, ChangePermission, ChangeOwner}
Same command run with User1.(who can view all other users calendar details completly which not shared)and using outlook 2013.
[PS] C:\Windows\system32>Get-MailboxPermission User1 | fl user,accessrights
User         : NT AUTHORITY\SELF
AccessRights : {FullAccess, SendAs, ReadPermission}
User         : Domain\User1
AccessRights : {FullAccess}
User         : Domain\Domain Admins
AccessRights : {FullAccess}
User         : Domain\Enterprise Admins
AccessRights : {FullAccess}
User         : Domain\Organization Management
AccessRights : {FullAccess}
User         : Domain\******n
AccessRights : {FullAccess}
User         : Domain\********n
AccessRights : {FullAccess}
User         : Domain\Exchange Servers
AccessRights : {FullAccess}
User         : Domain\Exchange Domain Servers
AccessRights : {FullAccess}
User         : Domain\Organization Management
AccessRights : {ReadPermission}
User         : Domain\Public Folder Management
AccessRights : {ReadPermission}
User         : Domain\User2
AccessRights : {ReadPermission}
User         : NT AUTHORITY\SYSTEM
AccessRights : {FullAccess}
User         : NT AUTHORITY\NETWORK SERVICE
AccessRights : {ReadPermission}
User         : Domain\Exchange Servers
AccessRights : {ReadPermission}
User        : Domain\Exchange Domain Servers
AccessRights : {ReadPermission}
User         : Domain\Delegated Setup
AccessRights : {ReadPermission}
User         : Domain\b***
AccessRights : {ReadPermission}
User         : Domain\Organization Management
AccessRights : {FullAccess, DeleteItem, ReadPermission, ChangePermission, ChangeOwner}
User         : Domain\Exchange Trusted Subsystem
AccessRights : {FullAccess, DeleteItem, ReadPermission, ChangePermission, ChangeOwner}
User         : Domain\******
AccessRights : {FullAccess, DeleteItem, ReadPermission, ChangePermission, ChangeOwner}
User         : domain\*******
AccessRights : {FullAccess, DeleteItem, ReadPermission, ChangePermission, ChangeOwner}
User         : BUILTIN\Administrators
AccessRights : {ReadPermission}
User         : Domain\Enterprise Admins
AccessRights : {FullAccess, DeleteItem, ReadPermission, ChangePermission, ChangeOwner}
User         : Domain\Domain Admins
AccessRights : {FullAccess, DeleteItem, ReadPermission, ChangePermission, ChangeOwner}
regards,
Najim.

User Mapping not fully Available Error

Hi
while connecting from EP to Sap R/3
created folder in System Administration and System object as Dedicated
system name: sapsystem - next - finish
selected propety category :Connector
AppHost : 101.110.110.105
Remote Host : 3
SAP Client : 800
SAP SYstem name : global
SAP SYstem ID : 00
SAP Server Port : 3200
System TYpe : SAP_R3
SAVE
Property Category : usermanagement
logon method - UIDPW
user mapping type - admin,user
SAVE
System alias as (sys1)
User Administration - UserMapping- search
Administrator in Users - start - edit-
System alias - sys1
user - sapuser i.e( R/3 server)
password - xyzabc
SAVE
then raising error Portal Runtime error
User Mapping not fully Available
with Exception id
Regards
Rakesh

Hi,
First you must import sap crptographic toolkit from help.sap.com, following link: http://help.sap.com/saphelp_nw2004s/helpdata/en/04/d246215f1d4f588d1d9c49391acb01/frameset.htm
Here be careful to follow all the steps, have a look at the link and the subt topic deploying crptographic toolkit.
Onec you have done that, restart the portal and related services.
Now it is possible that you might face other new probles or exceptions.
In that case you might need to update your jce files etc.
Please refer to the sap note: 796540
in that case

Auto_home map not shared to client?

Similar Messages

Maybe you are looking for