Obtain Ip address of hand held terminal

Hi all..
We are writing an application for hand held terminals. We are using PDT6846. The HHT application runs on a solaris machine from where the requests are routed to the server. Individual users connect to the HHT application through telnet.
There are two things that i need to know.
1. How to get the ip address of the terminal which is connecting to the aplication.
2. As of now, the user has two stages of authentication. One to sign in to the telnet session and then to sign in to the application. Is there a way to automatically sign in to telnet when the device is switched on. ie to configue some exe on start up of these terminal which would automatically login to the telnet session.
Please help me with these two sections
Regards
DST

Same old thing...
Do the devices actually have a public IP address (or an IP address relevant in an intranet)? If not then getting the IP address is worthless information.

Similar Messages

  • Enter Key in HHP Hand Held Terminal -Dolphine Model

    Hi All
    Afet Bar code scanning the "ENTER KEY" has to be activated automatically.
    Please refer the code and logic.
    Iam ready to built that code during Barcode Printing
    Please guide
    K.Prabakaran

    My issue has resolved
    thanks
    K.Prabakaran

  • Enterprise Server vs. wipe hand held

    i bought my blackberry 8330 from eBay flashed for Cricket service. when i went to set up my Setup Wizard, not being used to the ball, i accidentally pressed use for work phone & now it keeps asking me for my blackberry enterprise server email. i reset the phone causing me to loose my cricket internet service but not my phone service. so i re-flashed it back to cricket but it still wont let me add my personal email address so that my apps will work or so that i can send email from my phone. i read somewhere that if i wipe my hand held that it might reset the Setup Wizard, but i don't want to have to re-flash it cause it removes my internet service again. what exactly will happen if i wipe my hand held? will it reset the Setup Wizard? Will I have to re-flash again back to my service provider? i would be forever greatful if someone would point me in the right direction
    dallaskimfox   Posts: 1 Joined: Sat Jul 03, 2010 3:08 pm

    Hi Bowtiecj7,
    My name is Ryan and I work on behalf of Cricket Wireless. I would love to share more details regarding Cricket Wireless' new BlackBerry Curve 8530 Smartphone and plan.
    The device's current MSRP is $299.99 and requires our BlackBerry $60/month plan. You pay $60 per month, period. No monthly data fee required. Other carriers charge up to $30 a month in data fees. At Cricket it's simple: get unlimited talk, text and data and use your BlackBerry Smartphone to stay connected, anywhere within Cricket's coverage area.
    You will have the freedom to travel with access to mobile email, full HTML browsing and exclusive BlackBerry features including BlackBerry push email, BlackBerry Messenger, and BlackBerry App World.
    Plus, you get caller ID, voicemail, call forwarding, international text, video and picture messaging, mobile web, 3-way calling  and data backup.
    More device details at  http://www.mycricket.com/blackberry
    Plan details at http://www.mycricket.com/cell-phone-plans/plan/60_60b
    Best,
    Ryan on behalf of Cricket

  • Hand Held application not recognising a database instance when running in cradled mode through Windows Mobile Device Centre.

    How do I get a Hand Held application to recognise a database instance when running cradled through Mobile Device Centre?
    I have a database instance on a networked machine as NZTESTSERVER2\NZ2008.
    If I run the Hand Held application in WI-Fi connected mode it resolved this database connection name without any problems.
    This database connection name also works from a Desktop application running on the PC that I have cradled the Hand Held to.
    But the instance isn’t being resolved when I run the Hand Held application in cradled mode, without a Wi-Fi connection. In this case it still recognises the server address part ‘NZTESTSERVER2’ but it doesn’t recognise this with the database instance included
    (\NZ2008).
    I even tried using it with the servers IP and the instance (192.168.0.14\NZ2008), but again it recognises the server IP address (192.168.0.14), but not with the instance (\NZ2008).
    So why does the app run in WI-Fi but not cradled mode?

    It would better to understand your problem if you can share some code here,

  • Mouse acting strange in Console one with Hand Held Snap ins

    Has anyone else noticed that Console One acts strange after installing the
    Hand Held snap ins?
    Thanks,
    Cactus

    cactus wrote:
    > I was able to fix this issue by deleting or renaming one snapin file.
    > The file C:\novell\consoleone\1.2\snapins\zen\ZENLicensingS napins.jar
    > seems to be causing all this trouble. Restoring the file causes the
    > problems again.
    >
    >
    > "cactus" <[email protected]> wrote in message
    > news:Z5XRg.500$[email protected]..
    >> Has anyone else noticed that Console One acts strange after installing the
    >> Hand Held snap ins?
    >>
    >> Thanks,
    >>
    >> Cactus
    >>
    >
    >
    I had issues with that file as well when I was running ZFD and ZFS 6.5
    SP2 with ZFH 7 SP1. See my thread "Bug found with ZFH7 ConsoleOne
    plugins." Deleting the license snapin file or updating all components
    to 7 SP1 resolves the issues.
    Jason Doering
    Address is munged; I already get enough spam.
    Remove three nospams to reply.

  • Obtain bad address bge0

    Hi
    i was changing the ip address, gateway and dns of a sun solaris 9 machine. i have edited the files hosts, resolv and defaultrouter elsewhere. however, i forgot to copy the edited hosts file over and reboot the system. i thus obtained bad address bge0 and when ifconfig -a , it shows inet 0.0.0.0. have used terminal to get in and managed to use vi to create a file and mv to replace the hosts file. (hosts file is read only under vi). after reboot, inet still is 0.0.0.0. Have then use ifconfig command to change it and it manages to change to the required ip address. But the problem lies here, after reboot, the inet jumps back to 0.0.0.0 although the hosts file is correct now..
    any one knows a solution to this? please..
    thanks

    You also needed to edit /etc/hostname.bg0 in order to set an hostname. Also; just because a file is marked 'readonly' in vi doesn't mean you can't edit it. If you have the proper permissions (root) you can force vi to save your changes regardless of the lacking w permission flag using !.

  • Mac OS 10.4.6 Update and Palm Hand Held Issues

    Recently I installed the Mac OS 10.4.6 update after confirming that it should improve some minor issues with "Hot Synching".
    Previously I could "Hot Synch" with my Palm Mac Desk Top software 4.2.1 and also with my PC with no issues.
    I noticed now I can "Hot Sync" on my Mac--with no issues. However, when I take the Palm out of the USB Cradel and try to access the Palm Display page with the featured icons, I get a very unusual error:
    "Application can not be launched because it is missing localization info file xxx--enUS.prc."
    I checked the Palm site and entered the error message and the response was returned that indicated "several applications with the Palm Tungsten T require overlay files to run properly. "Dialer, SMS, & WAP Browser" require and overlay "prc" file that determines which language he application displays on the device. If this "prc" file is missing, it will cause this message to be displayed."
    I was instructed to install the "xxx_enUS.prc" using the Palm Install tool.
    I installed all of the "xxx_enUS.prc" files on Disk 2 and have performed a "Hot Sync" again. A successful "Hot Synch" was performed.
    The above message is still displayed on the Palm screen even after that successful "Hot Synch".
    I can not use any of the screen icons to select any of the features or vprograms on the Palm.
    The face buttons can be depressed but the selection from the Palm hand held icons with the stylus can not be accessed as the "missing localization info, ect" is displayed.
    I have performed soft resets to no avail.
    I still can not get this issues resolved.
    Anyone out there have any suggestions.
    POWER MAC G-4 (933 MHz QuickSilver) Mac OS X (10.4.5) iSite

    I don't use the synch. option. However, my RSS feeds are updating without problem after the update. If I remember correctly, the RSS feed update was affected by synching through .Mac? Is that true?
    What method did you use to update your system. As a rule, I use the combo update. If you used the incremental method, I suggest using the combo update. Remember to repair permissions via Disk Utility after the update.

  • I have a Mac Pro using OSX 10.7.4.  When using apple mail I click on the address icon to obtain email address and nothing happens.  I've restarted both the application and the Mac but still won't open address book.  Any ideas please.

    I have a Mac Pro using OSX 10.7.4.  When using apple mail I click on the address icon to obtain email address and nothing happens.  I've restarted both the application and the Mac but still won't open address book.  Any ideas please.

    Assuming you have these accounts set up in Mail, open preferences and under Accounts tab, edit the SMTP outgoing server list. Do you have a .mac address in the list? If so, delete it.
    Are you using iCloud?
    For the troubled account, select the correct SMTP server for that account in the box and check the box to use only that server with that account.

  • How can I read my ebook on a hand held?

    I bought $350 worth of ebooks from ebooks.com. They have no support and refer all of their technical questions to Adobe, so I hope someone from here can answer me.
    These are the instructions on how to transfer the ebook to the hand held on the ebooks.com site:
    Transferring your Mobipocket eBook to your Hand Held Device
    Download the Mobipocket Reader setup program for your hand held onto your PC from;
    http://www.mobipocket.com/en/DownloadSoft/DownLoadReaderStep1.asp
    Follow the prompts to install the Reader.
    Synchronize your hand held to complete the installation of Mobipocket Reader.
    With Mobipocket Reader open, select Help / About, then copy the PID and paste it into your account by clicking the Register a PID link on your account. You must do this before you download your eBook.
    Download your eBook.
    * Go to < https://secure.ebooks.com/user/login.aspx >
    * log in with your user name and password.
    * You will find your book listed there. Click on the "Download" link next to it.
    Your eBook should download directly to you hand held device.
    It says on there you need to "synchonize your hand held to complete the installition". How do I do that? I was never prompted to synchronize my hand held. I registered my PID on my ebooks page for both my computer and my hand held but I did it after I downloaded the ebooks and not before like you are supposed to. I tried taking off my ebooks again and downloading them again and it didn't work because I couldn't read the ebooks at all because the second time I downloaded it only a 1 K file in Digital Editions downloaded and so I had to recover the ebooks from my recycle bin.
    Then I tried to download it directly to my bebook but nothing showed up when I looked for it and when I looked at what downloaded to my bebook all that showed up was an 848 bytes .EDT file. Then I transferred the corresponding ebook from my computer to my ebook and it showed up on my hand held but it won't open.
    I have the EDT file and the ebook itself on my computer and I did everything right but it won't open on my ebook. What now?

    These all have drm so i cannot read them without a i-Device. 
    Correct.  If you do not have an iOS device or a Mac running Mavericks, do not buy Apple iBooks.  They will be unreadable.

  • HP LJ8000n unable to obtain IP address

    We have an old LaserJet 8000n that is unable to obtain an IP address. It has been working for the last 10 or so years. In the last two weeks or so, the printer is unable to get an IP address. I did a cold reset and nothing happens. The printer is setup to use DHCP to obtain IP address. I did also tried putting the IP address in manually but that does not work either. Below is the JetDirect configuration page printout.
    Any help/suggestion is much appreciated.

    This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
    You can find the Commercial Laserjet board here:
    http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • Problem to show "applet" in Hand Held PC(Palmtop PC)?

    Hi,
    I'm trying to open the Applet(i.e Calendar Applet) in Palmtop PC(Hand held PC).
    It is having Windows CE 5.0 version(which is the latest version in Market).
    It showing only the rectangle with "<b>RED Cross mark</b>".
    I don't have any menus in this version like Tools--->"Internet Options"(like IE 6.0) to modify settings..
    So,Is there any other way to solve this problem?
    10X,
    Rakesh Yeluri.

    Hi,
    I follow with the link  <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9d3b9b9b-0e01-0010-d58a-a3a9415aab28">xMII Mobile How To Guide</a>. With the help of that document I can change an xMII applet to an xMII servlet i.e Only for Query templet.
    But my Requirement is I have to show xMII calender applet in Windows CE Hand held device when I click on a link to select a date.
    But, I can't able to show xMII calender applet in Windows CE hand held device.
    Could you please help me out in this problem.
    Advance Thanx,
    Rakesh.

  • Hand held bar code scanner

    my hand held barcode scanner worked with my hp compaq with XP but doesn't with my new hp pavillion with windows 8 - why?

    Catsandflowers, welcome to the forum.
    You will have to check with the manufacturer of the barcode device for a driver for Win 8.  The driver is provided by the device manufacturer.
    Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • Error using the SQL conversion tool for Hand Held Management 7

    This is for Zenworks 7 HandHeld Management.
    I can't seem to find any mention of the SQLConv.exe tool in the
    documentation for Hand Held Management??
    Does any one have any?
    Also when using this tool I get the following error message:
    Error: DB-29 Database Message (1 of 2)
    Thursday, October 05, 2006
    An error occurred while executing the SQL command <CREATE
    DATABASE [ZENHM]>.
    Error: GEN-2 General Message (2 of 2)
    Thursday, October 05, 2006
    A database exception was caught: <>.
    ODBC Return Code: <-2>
    Return Code Meaning <>
    Additional Information: <>

    cactus,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
    - Check all of the other support tools and options available at
    http://support.novell.com.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://support.novell.com/forums)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://support.novell.com/forums/faq_general.html
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • Cant establish a bluetooth connection with my hewlett packard hand held

    I have an iMac G5 and a linux operated laptop working wirelessly from an Airport Express but cannot get the mac to "discover" my newly acquired HP travel companion hand held ( windows mobile 5) .My Mac does not have the intel processor although I am not sure whether that is relevant as i have the missing Sync programme installed.I am also getting 5 "errors on last sync" in Calender,Call log, Contacts,Music and SMS log.Also Entourage could not be located whilst Bookmark,File ,Notes and Photos all "last syncd"
    I have done a soft and hard reset on the HP to no avail.
    Could someone please advise me .Thanks

    Well i have finally go the screen back working but configuring the device to my Mac ( bluetooth) and synching is a different matter.I am none the wiser

  • WebSAPConsole - sending a beep to a hand-held device!

    Hi All,
    I am having trouble sending a sound to a hand-held device using WebSAPconsole. I have set up all of the configuration correctly (incl. ref to Rich Heilman's blog) and when I use the transaction in IE on my PC the sound (the default alert.wav file) plays fine.
    The transaction is a standard ABAP dialog transaction which is accessed through IE via WebSAPConsole on the hand-held device. The device we are using is a Teklogix 7535 running WinCE.
    The problem is that the hand-held device will not play wav files! It can play standard system level sounds but not wav files. So my problem is that SAPWebConsole wants to play a wav file when I send a sound.
    Any ideas? Am really here...
    Thanks,
    N.
    PS: I'll also post in the ABAP forum.

    Dear Naill F,
    did you find any solutions for this problem?
    I have the same problem with a windows-CE based scanner.
    Thanks for your reply,
    Marc,

Maybe you are looking for