Auto image load failure, ssl failure, secure connection failure

First their is a problem with some ssl web sites, now I have read the article and if it had worked I would not be posting this here. so for the last time, I go to a bank web site it has the page that tells me to add a exception. then when i get to the page for the exception it says their is no problem and no exception will be added. period. it is a loop, it will not not not let me add the web site to the exception list and sits their and fights with me. when i go to add it to the list it says no their is no problem with the cert so it will NOT be added, but when i try to go their it pops up the page again saying i cant go their because their is a problem. so this is a loop which means it does the same thing over and over and over again. so trying to add it to the exception list can not happen because firefox will NOT let me add it and will NOT let me go their any longer.
Problem 2. I was not able to post a question in this forum until i told it to search for bearded dragon as the problem with firefox THEN and ONLY THEN would it let me open this question.
problem 3 : in ebay in my own listings i am having a auto load image failure, yes yes yes I did add the web addresses under auto load images , exceptions and allow for both hosting web sites and even though they are in their it will still NOT NOT NOT load the images. it will make me, by forcing me, to go to view 1 image on the page then it says WARNING YOUR ABOUT TO GO FROM A SECURE CONNECTION TO A UN SECURE CONNECTION. then AFTER I say yes and go to view that 1 image it unlocks all of the other images on the web page.
and why is that happening because the firefox is not programmed correctly as in the base coding i can not change, I would need to tell it to STOP STOP STOP blocking the images and stop warning me when i am going from a secure connection to a unsecure connection.
and it will not not not for the love of god not load images on ebay in secure when the images are hosted from a unsecure web site.
their is really no discussion, I am simply telling you all what it is doing, period.
I have a iq of 165 and I am not stupid so what I am saying it is doing is what it is doing.
so telling me to read crusty old articles will just make me madder as I have all ready read them front, back, up side down and sideways and if they really worked like it says they do you would not be reading this.

so far under 9.0it is accepting the security certs, so I do not know if that happened again if it would have the same error or not.
but ty 4 trying to help.

Similar Messages

  • Image Load Failure

    I have a program that dynamically loads images from a
    database, loads them mirrors them, then adds them to the
    rawChildren of the Canvas, however, if an image does not exist is
    there a way to test the image existence and if that fails load a
    'dummy' image? I have the following code:
    public function imgLoader():void
    var context:LoaderContext = new LoaderContext();
    context.checkPolicyFile = true;
    this.img = new Image();
    this.img.source = this.img_path;
    this.img.maintainAspectRatio = true;
    this.img.scaleContent = false;
    this.img.autoLoad = false;
    this.img.loaderContext = context;
    this.img.addEventListener(Event.COMPLETE, handleImageLoad);
    try {
    this.img.load();
    } catch(err:*) {
    Alert.show("Cannot load Image: " + this.img_path);
    then of course i have a event listener function that does all
    the fun img stuff once the image loads.
    However, if the image does not exist, then the Event.COMPLETE
    is never called, the try is "successful" as far as Flex is
    concerned, is there an event listener that I'm missing that fires
    if the load fails?
    -Mike

    As it turns out this was easier than expected....
    I added the following listener:
    this.img.addEventListener(IOErrorEvent.IO_ERROR,
    handleImageError);
    function handleImageError(e:IOErrorEvent):void {
    Alert.show("cannot load image: " + img_path);
    and there it was the Alert that i was expecting when my image
    path fails!

  • Why doesn't flash player load movies when in secure connection?

    I have a new computer running on Windows 7 64bit with ESET Smart Security 5 RC. I installed the latest flash player which works perfectly fine as long as I don't use a secure connection (https). Whenever I'm on a secure webpage I see an empty white frame where there should be a flash object. Rightclicking produces a menu with two items: "movie not loaded" (in grey) and "about Adobe flash player". I've gone through troubleshooting and I've checked the security settings of my 32bit IE9 browser, which are all set to default. Also I checked my firewall and couldn't find anything unusual; anyway, turning it off altogether didn't fix the problem. Does anyone have any idea what else could cause this behaviour?

    Thanks for these suggestions.
    I have added the sites to the trusted sites in IE and that didn't help.
    Things are a bit more complicated with the global security settings of the flash player. When I click your link, I see the note (Note: The Settings Manager that you see above is not an image; it is the actual Settings Manager itself.), but no settings manager, so I cannot click any tabs. I can rightclick to go to global settings, but I can find no global security settings. A complicating factor is that I'm located in Poland and even though the installer correctly notes that I'm running an English language Windows system, it will only install flash player in Polish - and translations are usually not so good. So I have an "advanced" tab in the settings manager and I added my secure sites to the trusted sites, even though it says this is for programmers only. Anyway - this didn't help either.
    Please help, as this problem has cut me off from my bank account!

  • SSL/TLS - secure connection could not be established but passes diagnostics

    Any other ideas for the ever popular inability to create a secure connection issue?
    I've tried just about everything I could find in all the posts on this issue and continue to get the inability to create a secure connection messag4e when logging in.
    We tried the various Apple non-support channels: e-mail, chat, phone, and Genius Bar with no success.
    Here's what I've tried (attempting to log in after each change):
    SSL3.0 and TLS 1.0 are enabled (and always have been)
    iTunes and iTunes Helper are in the Windows Firewall Exception list
    reinstalled itunes 9.02 several times.
    UNINSTALLED Norton Internet Security
    Turned off Windows firewall.
    deleted contents of /etc/hosts
    Cleared SSL state
    Unchecked “Check for server certificate revocation, restarted IE
    --After this change I got an "network connection timed out." message
    Cleared SSL state
    --Back to "secure network connection could not be established"
    This happens on my daughter's college network and on our home family area network. And other PCs have no trouble accessing this iTunes account on both of these networks.

    Hi there,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    -Griff W.

  • Image loading problem with weblogic security page

    I developed an j2ee application on tomcat server. After successful working in tomcat I migrated to weblogic server.
    So problem is the application is working properly with out security in weblogic. Later security is added to the application, then the back ground images are not loading in .jsp pages. Please suggest me what i have to follow to display back ground images in the .jsp pages. I was unable to find solution.
    Thanks
    Ananda

    Hi,
    There is a BADI (TRIP_IMP_EXP) that can help you to restrict trip amount by set delimit date.
    Use RESTRICT_TRAVEL_RANGE method ot do this.
    BR, Jurijs

  • I receive secure connection failure if I try accessing certain websites

    I have been trying to access certain websites and I keep getting secure connection failure for about a week now. When I try using other browsers they don't work either. I tried most of the troubleshooting methods mention here but its still persists. Below are the screenshots of the message I receive and the browser console error message.
    http://prntscr.com/6yjmfz
    http://prntscr.com/6yjokf

    Strangely, I noticed a couple of https sites I had trouble logging into from a link inside a https site.
    In System Preferences I went to Accouns and for myself unchecked "Enable parental controls".
    I was then able to log onto the the https site.

  • Secure connection failure in browser for https sites

    Recently I kept getting the error message "Secure Connection Failure" when using Firefox to go to https sites. I had a similar problem when I tried using Safari to connect to https sites.
    I fixed the problem by opening System Preferences > Parental Controls > selecting the appropriate User (as long as you have administration rights) > selected Allow unrestricted access to websites (by default Try to limit access to adult websites automatically is selected).
    Once I checked unrestricted access I was able to go to the https sites I wanted, which were my bank's site and the Firefox homepage for FAQs. Then I went back and checked "Try to limit ...". That brought back the error message again so I checked "Allow unrestricted access ...".
    The issue may have arisen because I downloaded a system security update a few days ago. Perhaps it reset the Parental Controls default.
    It would be good to block adult sites but the alternative seems to be to customize in Parental Controls the sites that are OK. This would be a tedious job because so many sites are https eg this site.
    I no longer have a problem but thought this might help others.

    Strangely, I noticed a couple of https sites I had trouble logging into from a link inside a https site.
    In System Preferences I went to Accouns and for myself unchecked "Enable parental controls".
    I was then able to log onto the the https site.

  • How do I over-ride a secure connection failure to access the IP address for my wirelss router?

    I have a Linksys WRT54G wireless router. Yesterday all wireless functionality dropped out. I tried going to the router's IP address and got this message:
    Secure Connection Failed
    An error occurred during a connection to 192.168.1.1.
    You have received an invalid certificate. Please contact the server administrator or email correspondent and give them the following information:
    Your certificate contains the same serial number as another certificate issued by the certificate authority. Please get a new certificate containing a unique serial number.
    (Error code: sec_error_reused_issuer_and_serial)
    I searched for this message in Firefox help and tried the steps listed on:
    http://support.mozilla.com/en-US/kb/Certificate%20contains%20the%20same%20serial%20number%20as%20another%20certificate
    But it did not work. I could not access the IP address. I needed to do so, to reset and re-secure the wireless router. I was able to do this in IE because there is an option to ignore the warning. I would like to be able to access the router in Firefox.

    Delete the certificate in servers and authorities.
    Enter URL about:config
    Change browser:ssl_override_behavior to 1
    Accept the certificate again

  • Suddenly getting a warning about a self issued certificate for a secure connection failure..is this a spoof?

    when starting up firefox, our fortigate firewall has started issuing a warning..
    "Secure connection failed- s-static.ak.fbcdn.net:443 uses of invalid security certificate. The certificate is not trusted because it is self signed. The certificate is valid for FGT50B3G10615174 Fortinet. (Error code: sec_errror_ca_cert_invalid). This could be a problem with the server's configuration or it could be someone trying to impersonate the server.
    If you have connected to the server successfully i the past the error may be temporary and you can try it again later."
    This error is coming up on more than one computer when going into Firefox.

    Try to disable secure connection in Facebook.
    *[https://www.facebook.com/settings?tab=security#!/settings?tab=security&section=browsing&t]

  • WSUS Sync is not working Sync failed: UssCommunicationError: WebException: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. --- System.Security.Authentication.AuthenticationException: The remote

    I know there are loads of posts with same issue and most of them were related to proxy and connectivity .
    This was case for me as well (few months back). Now the same error is back. But I've confirmed that FW ports and proxy are fine this time around.
    server is configured on http port 80 
    ERROR
    Sync failed: UssCommunicationError: WebException: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. ---> System.Security.Authentication.AuthenticationException: The remote certificate is invalid
    according to the validation procedure.~~at System.Web.Services.Protocols.WebClientProtocol.GetWebResponse(WebRequest request). Source: Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.WSyncAction.WSyncAction.SyncWSUS
    I've checked proxy server connectivity. I'm able browse following site from WSUS server
    http://catalog.update.microsoft.com/v7/site/Home.aspx?sku=wsus&version=3.2.7600.226&protocol=1.8
    I did telnet proxy server on the particular port (8080) and that is also fine.
    I've doubt on certificates, any idea which are the certificates which we need to look? And if certificate is expired then (my guess) we won't be able open the above mentioned windows update catalog site?
    Any tips appreciated !
    Anoop C Nair (My Blog www.AnoopCNair.com)
    - Twitter @anoopmannur -
    FaceBook Forum For SCCM

    Hi Lawrence ! - Many thanks for looking into this thread and replying. Appreciate your help.
    Your reply  ("SSL is enabled/configured, and the certificate being used is invalid
    (or the cert does not exist or cannot be obtained), or the SSL connection could not be established.") is very helpful.
    I've already tested CONTENT DOWNLOAD and it's working fine. WSUS Sync was also working fine for years with proxy server configured on port (8080) and WSUS server on port 80.
    My Guess (this is my best guess ;)) is this something to do with Firewall or Proxy side configuration rather than WSUS. However, I'm not finding a way to prove this to proxy/firewall team. From their perspective all the required port communication open and
    proxy server is also reachable. More over we're able to access internet (Microsoft Update Catalog site) over same port (8080).
    Any other hints where I can prove them it's a sure shot problem from their side.
    Thanks again !!
    Anoop C Nair (My Blog www.AnoopCNair.com)
    - Twitter @anoopmannur -
    FaceBook Forum For SCCM

  • Package Load Failure message in VS 2005 and Error: WIJ 20002

    After installing BusinessObjects Enterprise XI 3.1 .NET SDK when ever I open any project in VS 2005 I get the error message (the same happened on other system as well)
    Package Load Failure
    Package 'BusinessObjects.Enterprise.Vsip.BOEVsPackage, BOEVsPackage, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=... has failed to load properly (GUID = {...}). Please contact package vendor for assistance. Application restart is recommended, due to possible environment corruption. Would you like to disable loading this package in the future? You may use 'devenv /resetskippkgs' to re-enable package loading.
    I did try 'devenv /resetskippkgs' but still get this error. Any idea reagarding this.
    Next issue using the code sample provided in the site to create webi document by passing the universe id gives error message :
    "The Web Intelligence Java Report Panel cannot connect to the server. close the report panel and try to connect again or see your BO Administrator. (Error: WIJ 20002)."
    The Java version I have is 6 and I checked the Universe is not locked.
    Need help to identify the cause for both errors.

    Try the following as posted on another forum:
    Two solutions: 
    1.  -Go in to the Tools menu in .NET, and choose Import and Export Settings.
        - From the dialogue box, choose Reset All Settings and follow the steps
    2. If you have installed VS.NET to a drive other than the C drive, copy all files from the folder C:\Program Files\Microsoft Visual Studio 8\Common7\IDE to the same folder on the drive where .NET is installed, ie :
    D:\Program Files\Microsoft Visual Studio 8\Common7\IDE
    Regards,
    Jonathan

  • Package Load Failure, no beta versions of anything

    Hi,
    I get a "Package Load Failure" when starting VS2008. I've tried everything I can
    possibly think of, including reading about the problem in this forum, but nothing
    helps. The installation has installed five different asseblies correctly (as far as
    I can see) in the GAC, two for Oracle.DataAccess, and one each for the others.
    To avoid problems, I made completely fresh install of Windows Vista Ultimate, then
    I installed all security updates from MS, then VS 2008, then ODT 1110620. No betas
    has been installed at any point.
    I got one error message during install of ODT, "The request to star the service
    OracleMTSRecoveryService has timed out", but I dont think that should matter for
    this problem.
    Are there any other things to try to get ODT to work? I would appreciate any help I can get.
    The guid in the error message when staring VS 2008 is "D601BB95-E404-4A8E-9F24-5C1A462426CE".
    Regards,
    Carl

    Hi
    I run the 'gacutil /l | findstr Oracle' and that result seemed OK. I post the output here:
    Oracle.DataAccess, Version=2.111.6.20, Culture=neutral, PublicKeyToken=89b483f429c47342, processorArchitecture=x86
    Oracle.Management.Omo, Version=2.111.6.20, Culture=neutral, PublicKeyToken=89b483f429c47342, processorArchitecture=x86
    Oracle.VsDevTools, Version=2.111.6.20, Culture=neutral, PublicKeyToken=89b483f429c47342, processorArchitecture=x86
    Oracle.Web, Version=2.111.6.20, Culture=neutral, PublicKeyToken=89b483f429c47342, processorArchitecture=x86
    Policy.2.102.Oracle.DataAccess, Version=2.111.6.20, Culture=neutral, PublicKeyToken=89b483f429c47342, processorArchitecture=x86
    Policy.2.111.Oracle.DataAccess, Version=2.111.6.20, Culture=neutral, PublicKeyToken=89b483f429c47342, processorArchitecture=x86
    System.Data.OracleClient, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089, processorArchitecture=x86
    Oracle.DataAccess, Version=1.111.6.20, Culture=neutral, PublicKeyToken=89b483f429c47342
    Policy.1.102.Oracle.DataAccess, Version=1.111.6.20, Culture=neutral, PublicKeyToken=89b483f429c47342
    Policy.1.111.Oracle.DataAccess, Version=1.111.6.20, Culture=neutral, PublicKeyToken=89b483f429c47342
    Policy.10.1.Oracle.DataAccess, Version=1.111.6.20, Culture=neutral, PublicKeyToken=89b483f429c47342
    Policy.10.2.Oracle.DataAccess, Version=1.111.6.20, Culture=neutral, PublicKeyToken=89b483f429c47342
    Policy.9.2.Oracle.DataAccess, Version=1.111.6.20, Culture=neutral, PublicKeyToken=89b483f429c47342
    It is by the way VS 2008 (not 2005), if that makes any difference. I did not try to reregister the assemblies since they seemed OK (but my path to them are a bit different not c:\Oracle\Product, but c:\Oracle\Developer\Product because Developer is the users username (default with Oracle installer), but I did the 'devenv /setup' but that did not help.
    regards
    Carl

  • Unsigned applet load failure via HTTPS

    Java Plug-in 1.5.0_06
    MSIE 6.0
    Unsigned applet loading via HTTPS failed.
    We used a relative URL in an APPLET tag :
    <APPLET CODEBASE="/TEST/" ARCHIVE="test.jar" CODE="nl.myorganisation.test">
    The plugin does not seem to reuse the browser SSL-session.
    It looks like the plugin does not find installed certificates in Explorer stores.
    The 2th and 3th connection retry use an erroneous URL.
    network: Connecting https://myorganisation.nl/TEST/test.jar with proxy=DIRECT
    security: Loading Root CA certificates from <jre-home>\lib\security\cacerts
    security: Loaded Root CA certificates from <jre-home>\lib\security\cacerts
    security: Loading SSL Root CA certificates from <jre-home>\lib\security\cacerts
    security: Loaded SSL Root CA certificates from <jre-home>\lib\security\cacerts
    security: Loading Deployment SSL certificates from <user-home>\Data\Sun\Java\Deployment\security\trusted.jssecerts
    security: Loaded Deployment SSL certificates from <user-home>\Data\Sun\Java\Deployment\security\trusted.jssecerts
    security: Loading certificates from Deployment session certificate store
    security: Loaded certificates from Deployment session certificate store
    security: Loading certificates from Internet Explorer ROOT certificate store
    security: Loaded certificates from Internet Explorer ROOT certificate store
    security: Checking if certificate is in Deployment session certificate store
    security: Checking if SSL certificate is in Deployment permanent certificate store
    network: Connecting https://myorganisation.nl/CGI-BIN/nl/myorganisation/test.class with proxy=DIRECT
    security: Loading certificates from Deployment session certificate store
    security: Loaded certificates from Deployment session certificate store
    security: Checking if certificate is in Deployment session certificate store
    security: Checking if SSL certificate is in Deployment permanent certificate store
    network: Connecting https://myorganisation.nl/CGI-BIN/nl/myorganisation/test.class with proxy=DIRECT
    security: Loading certificates from Deployment session certificate store
    security: Loaded certificates from Deployment session certificate store
    security: Checking if certificate is in Deployment session certificate store
    security: Checking if SSL certificate is in Deployment permanent certificate store
    load: class nl.myorganisation.test not found.
    Does anybody have any suggestion ?
    Thanks and greetings,
    Marc

    First, Java plugin don't use browser https connection starting JRE 1.4, for running an applet in https server, the browser need to establish a https connection first, then Java pugin will use another https connection.
    Second, Java plugin can read certificate from browser, starting JRE 1.5, you can go to Java control panel, Advanced tab, under security, check on the box:
    "Use certificate and keys in browser keystore"
    This way the Java plugin will read the certificate from browser too. (It will work automatically in IE browser, if you use Mozilla, you have to install JSS package first).
    To answer your question, you can either turn on that option or import https certificate into JRE keystore (using Java control panel) for https connection.
    Hope that answered your question.
    Dennis

  • How do i fix 'error; texture load failure' problems for an online game?

    i play chaoticgame.com online. it currently has no admin staff to help. the problem is that the website pages do not fully load. there is a function i can access that shows me all the errors im getting, most are- error; texture load failure and error; failed downloading....
    this is a recent problem. also if i access the website via iphone using wifi from my home connection i get the same errors, so i dont know if this is a interent connection problem because ive had no other problems with websites.
    i believe it has something to do with texture memory?

    Hi Lorne.V.,
    How exactly are you installing NI DAQmx on the target machines?  Even if you include the DAQmx merge module in your build, you will still need to install DAQmx on the target machine separately. 
    Can you also confirm that the DAQmx.dll is installed in the same directory on both the development and deployment machines?  And that you have the same version of DAQmx on both machines?
    Regards,
    Lindsey W. | Applications Engineer | National Instruments

  • BizTalk admin console error Provider load failure

    Hi,
    I am facing issue with BizTalk admin console, getting below error, 
    i  thought it will be due to sql server or WMI so restarted sql services as well WMIS services but no luck. restarted Distributed transaction services as well as restarted machine but it did not solve.
    TITLE: BizTalk Server Administration
    Failed to load Group [AMTROWBT13DV04\AMTROWBT13DEV:BizTalkMgmtDb] data providers. (Microsoft.BizTalk.Administration.SnapIn)
    For help, click: http://go.microsoft.com/fwlink/?LinkId=47400&ProdName=Microsoft+BizTalk+Server+2013+R2&ProdVer=3.11.158.0&EvtSrc=Microsoft.BizTalk.Administration.SnapIn.Properties.Errors&EvtID=FailedLoadingGroupProviders&EvtChain=Microsoft.BizTalk.Administration.SnapIn.Properties.Errors+%2cFailedLoadingGroupProviders
    ADDITIONAL INFORMATION:
    Failed to load Group [AMTROWBT13DV04\AMTROWBT13DEV:BizTalkMgmtDb] data providers. (Microsoft.BizTalk.Administration.SnapIn)
    For help, click: http://go.microsoft.com/fwlink/?LinkId=47400&ProdName=Microsoft+BizTalk+Server+2013+R2&ProdVer=3.11.158.0&EvtSrc=Microsoft.BizTalk.Administration.SnapIn.Properties.Errors&EvtID=FailedLoadingGroupProviders
    Provider load failure  (System.Management)
    after looking at event viewer i can see few more error messages, 
    Faulting application name: mmc.exe, version: 6.3.9600.16384, time stamp: 0x52158765
    Faulting module name: KERNELBASE.dll, version: 6.3.9600.17055, time stamp: 0x532943a3
    Exception code: 0xe0434352
    Fault offset: 0x00011d4d
    Faulting process id: 0x215c
    Faulting application start time: 0x01d004a6e0c31506
    Faulting application path: C:\windows\SysWOW64\mmc.exe
    Faulting module path: C:\windows\SYSTEM32\KERNELBASE.dll
    Report Id: 3d994be7-709f-11e4-80ee-00505689506c
    Faulting package full name: 
    Faulting package-relative application ID:
    Application: mmc.exe
    Framework Version: v4.0.30319
    Description: The process was terminated due to an unhandled exception.
    Exception Info: System.Reflection.TargetInvocationException
    Stack:
       at Microsoft.ManagementConsole.Internal.SnapInMessagePumpProxy.OnThreadException(System.Object, System.Threading.ThreadExceptionEventArgs)
       at System.Windows.Forms.Application+ThreadContext.OnThreadException(System.Exception)
       at System.Windows.Forms.Control.WndProcException(System.Exception)
       at System.Windows.Forms.Control+ControlNativeWindow.OnThreadException(System.Exception)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr, Int32, IntPtr, IntPtr)
       at System.Windows.Forms.UnsafeNativeMethods.IntDestroyWindow(System.Runtime.InteropServices.HandleRef)
       at System.Windows.Forms.UnsafeNativeMethods.DestroyWindow(System.Runtime.InteropServices.HandleRef)
       at System.Windows.Forms.NativeWindow.DestroyHandle()
       at System.Windows.Forms.Control.DestroyHandle()
       at System.Windows.Forms.Control.Dispose(Boolean)
       at Microsoft.BizTalk.Administration.SnapIn.Forms.GroupHub.OperationsCtrl.Dispose(Boolean)
       at System.ComponentModel.Component.Dispose()
       at Microsoft.ManagementConsole.FormView.InternalShutdown()
       at Microsoft.ManagementConsole.View.HandleShutdownRequest(Microsoft.ManagementConsole.Internal.IRequestStatus)
       at Microsoft.ManagementConsole.View.ProcessRequest(Microsoft.ManagementConsole.Internal.Request)
       at Microsoft.ManagementConsole.ViewMessageClient.ProcessRequest(Microsoft.ManagementConsole.Internal.Request)
       at Microsoft.ManagementConsole.Internal.IMessageClient.ProcessRequest(Microsoft.ManagementConsole.Internal.Request)
       at Microsoft.ManagementConsole.Executive.RequestStatus.BeginRequest(Microsoft.ManagementConsole.Internal.IMessageClient, Microsoft.ManagementConsole.Internal.RequestInfo)
       at Microsoft.ManagementConsole.Executive.SnapInRequestOperation.ProcessRequest()
       at Microsoft.ManagementConsole.Executive.Operation.OnThreadTransfer(Microsoft.ManagementConsole.Executive.SimpleOperationCallback)
       at System.RuntimeMethodHandle.InvokeMethod(System.Object, System.Object[], System.Signature, Boolean)
       at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(System.Object, System.Object[], System.Object[])
       at System.Reflection.RuntimeMethodInfo.UnsafeInvoke(System.Object, System.Reflection.BindingFlags, System.Reflection.Binder, System.Object[], System.Globalization.CultureInfo)
       at System.Delegate.DynamicInvokeImpl(System.Object[])
       at Microsoft.ManagementConsole.Executive.DelegateMessage.OnExecute()
       at Microsoft.ManagementConsole.Executive.Message.Execute()
       at Microsoft.ManagementConsole.Executive.SnapInThread.DispatchPendingSnapInMessages()
       at Microsoft.ManagementConsole.Executive.SnapInThread.OnDataReadyAsync(System.Object, System.EventArgs)
       at Microsoft.ManagementConsole.Executive.MmcThreadMessageWindow.WndProc(System.Windows.Forms.Message ByRef)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr, Int32, IntPtr, IntPtr)
       at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG ByRef)
       at System.Windows.Forms.Application+ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(IntPtr, Int32, Int32)
       at System.Windows.Forms.Application+ThreadContext.RunMessageLoopInner(Int32, System.Windows.Forms.ApplicationContext)
       at System.Windows.Forms.Application+ThreadContext.RunMessageLoop(Int32, System.Windows.Forms.ApplicationContext)
       at System.Windows.Forms.Application.Run()
       at Microsoft.ManagementConsole.Internal.SnapInMessagePumpProxy.Microsoft.ManagementConsole.Internal.ISnapInMessagePumpProxy.Run()
       at Microsoft.ManagementConsole.Internal.ISnapInMessagePumpProxy.Run()
       at Microsoft.ManagementConsole.Executive.SnapInThread.OnThreadStart()
       at System.Threading.ThreadHelper.ThreadStart_Context(System.Object)
       at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
       at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
       at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object)
       at System.Threading.ThreadHelper.ThreadStart()
    does any one face similar issue if yes can you please help me to solve this?
    Regards,
    Amit
    Regards, Amit More

    here is log generated during configuration,
    [2014-11-24 05:16:10:0572 Info Configuration Framework]Configuring feature: WMI
    [2014-11-24 05:16:10:0588  Info BtsCfg] Entering function: CBtsCfg::ConfigureFeature
    [2014-11-24 05:16:10:0588  Info BtsCfg] Configuring feature: WMI
    [2014-11-24 05:16:10:0588  Info BtsCfg] Entering function: CBtsCfg::IsSelectedAnswer
    [2014-11-24 05:16:10:0588  Info BtsCfg] Leaving function: CBtsCfg::IsSelectedAnswer
    [2014-11-24 05:16:10:0588  Info BtsCfg] Entering function: CWMI::Connect
    [2014-11-24 05:16:10:0588  Info BtsCfg] Leaving function: CWMI::Connect
    [2014-11-24 05:16:10:0603  Info BtsCfg] Entering function: CWMI::CreateGroup
    [2014-11-24 05:16:10:0791  Error BtsCfg] d:\bt\127854\private\source\setup\btscfg\btswmi.cpp(438): FAILED hr = 80041013
    [2014-11-24 05:16:10:0791  Error BtsCfg] Provider load failure
    [2014-11-24 05:16:10:0791  Error BtsCfg] d:\bt\127854\private\source\setup\btscfg\btscfg.cpp(1801): FAILED hr = 80041013
    [2014-11-24 05:16:10:0791  Info BtsCfg] Entering function: CBtsCfg::UnConfigureFeature
    [2014-11-24 05:16:10:0791  Info BtsCfg] Unconfiguring feature: WMI
    [2014-11-24 05:16:10:0791  Warning BtsCfg] BTS management server or DB names are not found in the registry.
    [2014-11-24 05:16:10:0791  Info BtsCfg] Entering function: CWMI::StopHostInstance
    [2014-11-24 05:16:10:0807  Error BtsCfg] d:\bt\127854\private\source\setup\btscfg\btswmi.cpp(1553): FAILED hr = 80041013
    [2014-11-24 05:16:10:0807  Error BtsCfg] Provider load failure
    [2014-11-24 05:16:10:0807  Info BtsCfg] Entering function: CWMI::UnMapHost
    [2014-11-24 05:16:10:0807  Error BtsCfg] d:\bt\127854\private\source\setup\btscfg\btswmi.cpp(1698): FAILED hr = 80041013
    [2014-11-24 05:16:10:0807  Error BtsCfg] Provider load failure
    [2014-11-24 05:16:10:0807  Info BtsCfg] Instantiating IBTSMsgBoxPerformance object
    [2014-11-24 05:16:10:0869  Info BtsCfg] Calling IBTSMsgBoxPerformance::UninstallArtifacts
    Exception in CounterManager.UninstallArtifacts when uninstalling the perf counter instances. The exception details are: 
    Source of exception: System
    Message: Cannot delete Performance Category because this category is not registered or is a system category.
    Stack trace:    at System.Diagnostics.PerformanceCounterCategory.Delete(String categoryName)
       at Microsoft.BizTalk.MsgBoxPerfCounters.MgmtDbAccessEntity.UninstallInstances(Boolean regularUninstall)
       at Microsoft.BizTalk.MsgBoxPerfCounters.CounterManager.UninstallArtifacts(Boolean regularUninstall, String logFileName)
    [2014-11-24 05:16:11:0166  Info BtsCfg] Stopping Tracing
    [2014-11-24 05:16:11:0166  Info BtsCfg] Entering function: CWMI::DeleteServer
    [2014-11-24 05:16:11:0182  Error BtsCfg] d:\bt\127854\private\source\setup\btscfg\btswmi.cpp(1353): FAILED hr = 80041013
    [2014-11-24 05:16:11:0197  Error BtsCfg] Provider load failure
    [2014-11-24 05:16:11:0197  Info BtsCfg] Entering function: CWMI::UnConfigureGroup
    [2014-11-24 05:16:11:0197  Error BtsCfg] d:\bt\127854\private\source\setup\btscfg\btswmi.cpp(1076): FAILED hr = 80041013
    [2014-11-24 05:16:11:0197  Error BtsCfg] Provider load failure
    [2014-11-24 05:16:11:0197  Info BtsCfg] Leaving function: CBtsCfg::UnConfigureFeature
    [2014-11-24 05:16:11:0197  Info BtsCfg] Leaving function: CBtsCfg::ConfigureFeature
    [2014-11-24 05:16:11:0213 Warning Configuration Framework]Feature failed to configure: WMI.
    [2014-11-24 05:16:11:0400 Info Configuration Framework]Configuration Summaries:
    [2014-11-24 05:16:11:0400 Error Configuration Framework]Feature: [Group] Failed to configure with error message [Provider load failure
    [2014-11-24 05:16:11:0400 Error Configuration Framework]Feature: [BizTalk Runtime] Failed to configure with error message [Feature is skipped due to dependent feature (Group) failed to configure correctly.]
    [2014-11-24 05:16:11:0400 Error Configuration Framework]Feature: [BAM Tools] Failed to configure with error message [Feature is skipped due to dependent feature (Group) failed to configure correctly.]
    [2014-11-24 05:16:11:0400 Error Configuration Framework]Feature: [BAM Portal] Failed to configure with error message [Feature is skipped due to dependent feature (Group) failed to configure correctly.]
    [2014-11-24 05:16:11:0400 Info Configuration Framework]
    Feature: SSOServer,Engine Configuration Enabled: yes
    Sub UI: no Configured: yes
    [2014-11-24 05:16:11:0400 Info Configuration Framework]
    Feature: SSOServer,Engine Configuration Enabled: no
    Sub UI: yes Configured: yes
    [2014-11-24 05:16:11:0400 Info Configuration Framework]
    Feature: WMI Configuration Enabled: yes
    Sub UI: no Configured: no
    [2014-11-24 05:16:11:0400 Info Configuration Framework]
    Feature: Engine,BTSCfg Configuration Enabled: no
    Sub UI: no Configured: no
    [2014-11-24 05:16:11:0400 Info Configuration Framework]
    Feature: RulesEngine Configuration Enabled: yes
    Sub UI: no Configured: yes
    [2014-11-24 05:16:11:0400 Info Configuration Framework]
    Feature: MOT Configuration Enabled: yes
    Sub UI: no Configured: no
    [2014-11-24 05:16:11:0400 Info Configuration Framework]
    Feature: BAMTools Configuration Enabled: no
    Sub UI: no Configured: no
    [2014-11-24 05:16:11:0400 Info Configuration Framework]
    Feature: BAMTools Configuration Enabled: no
    Sub UI: yes Configured: no
    [2014-11-24 05:16:11:0400 Info Configuration Framework]
    Feature: BAMPortal Configuration Enabled: no
    Sub UI: no Configured: no
    [2014-11-24 05:16:11:0400 Info Configuration Framework]
    Feature: MsEDIAS2 Configuration Enabled: no
    Sub UI: no Configured: no
    [2014-11-24 05:16:11:0400 Info Configuration Framework]Leaving function ConfigureFeatures().
    [2014-11-24 05:16:11:0416 Info Configuration Framework]Entering function WizardStep_NextStepChanged.
    [2014-11-24 05:16:11:0416 Info Configuration Framework]Entering function ConfigWizardResult_Load.
    [2014-11-24 05:16:11:0447 Info Configuration Framework]Leaving function ConfigWizardResult_Load.
    [2014-11-24 05:16:11:0478 Info Configuration Framework]Leaving function WizardStep_NextStepChanged.
    [2014-11-24 05:16:14:0416 Info Configuration Framework]Displaying information notification to user. Message: <Exception Message="Provider load failure
    " Source="" HelpID="" />
    Regards, Amit More

Maybe you are looking for