Auto mailers in recruiter's page ( E - Recruitment )

Hi ,
I have one client requirement. In the format  of sending interview invite to candidate the format of the letter should have a check box or radio button of attending , by which he can confirm the recruiter that he is attending the interview. Basically that tick or radio button while send a confirmation mailer to recruiter. Now to enable this adobe needs to be used as per my understanding as it is not possible through smartform to enable interaction. In standard system, adob is deactivated.
Request your suggestion or if you could refer any notes on the same . This is the class and method for the same . CL_HRRCF_CS_DOC_CAT_SF_SUPER ( Class )
SET_SF_PROPERTIES ( Method )
Require help on urgent basis.
Regards,
Shiva

Hello,
I have another idea besides trying to use forms. You could possibly consider using the Confirmation activities as they standard and just require some configurations. You will configure an activity type for exmaple called "Interview Confirmation" and assign it to  Category 9. You will then  choose confirmation decisions and reasons. Maybe through the workflow you can then create the confirmation activity and send it through e-mail to the candidate once the interview invitation activity is created. The candidate will open the link and choose their response from the activity and submit back to you. You could also maybe include the URL for the confirmation activity in the interview invitation correspondence with "Click the below link to confirm". It might require some bit of enhancement to automate the activity creating and generate the link as you create the interview activity.
Regards,

Similar Messages

  • Unable to access E-Recruiting Start Pages Externally

    Hello,
    I’m hoping for some assistance with an E-Recruiting issue (standalone system; Version 3.0).  We are currently only able to access the start pages while inside of our network, and receive a “page cannot be displayed” message while outside of our network.  This is with the exception of the candidate registration page.  We can successfully register, and then pass on to the main E-Recruiting start page for an external candidate.
    The hrrcf_start_int bsp/service is used to call the start page for registered internal candidates, recruiters, and administrators (different view for each).  The hrrcf_start_ext bsp/service is used to call the start page for registered external candidates.  And, the hrrcf_cand_reg bsp/service is used to access the external candidate registration page. 
    The URL’s for the start pages were created using program RCF_GENERATE_URLS.   We are requiring all traffic be routed through our WebDispatcher, and all traffic be HTTPS, so the URL’s start out with https://recruiting....  Our E-Recruiting system is actually “careers”, but again, we want all traffic to go through our WebDispatcher, which is “recruiting”.
    We have created external aliases in transaction SICF for all three URL’s, and using the alias, I can successfully login to all pages within our network.   When I test the external aliases within SICF, I get an internal error (The user is not assigned a candidate or an employee) for the hrrcf_start_int and hrrcf_start_ext services.  When I test the external alias for hrrcf_cand_reg, it is successful.
    When I test the hrrcf_start_int  service within SICF, I get the logon page, but after logging on, I get message “Name of logical port’&&lp_named” is invalid”.  When I test the hrrcf_cand_reg service, it is successful. 
    When I test the hrrcf_start_int and hrrcf_start_ext BSPs in SE80, I receive an Internet Explorer “cannot display page” message.   The same is true for the hrrcf_cand_reg.  However, it is trying to access http://recruiting instead of https://recruiting.  I can see that URL address in the application.do Controller, but have no idea where to change it, because it is greyed out (any help with this would be appreciated as well.)
    We have created internal users using program RCF_CREATE_USER, and when I look at transaction BP, I see that it is creating a business partner for each user.
    We have had SAP tell us that it is not a WebDispatcher issue, and we have also confirmed that it is not a firewall issue.
    It seems interesting to me that we can only get to the one page that does not first require authentication.  If anyone has any information that would be helpful, I would appreciate your time.
    Sorry for such a long message, but I was just trying to be as clear as possible.
    Thank you,
    Leeanna Travis

    Hello Leeanna,
    quite a lot of topics and doing remote analysis for netwok issues is difficult.
    Some ideas:
    - starting hrrcf_start_ext / hrrcf_start_int via SICF or SE80 will never be successful as these applications need parameters. The message you got when testing startpage from SICF is classical for invalid startpage Id
    - if you do not reach pages from outside, check network traffic / access rights in firewalls. Usually the sap server name cannot be resolved through a dns for an outside call as you companies dns is not visible for internet users. You will need a relay.
    - check that full qualified server name is set on the server
    - check eeb infrastructure that it allows the access protocoll. If ICF service says http but firewall only allows https you won't get a responde. Sometime switching protocolls within the request produces problems.
    - WebDispacher is known for eating parameters / url parts. Try to get your hands on the traces of the requests which really reach the server.
    - if possible supply some more information on release & support package level. E.g. there is a support package which has an error that if you activate 'do not show https warning' in an icf service it does not only hide the warning but the whole logon screen :o(
    Hope that helps, if not just reply - perhaps w/ focus on one special point.
    Best Regards
    Roman Weise

  • E-Recruitment Recruitment home page under Talent Pool Database

    Hi
    E-Recruitment
    Recruitment home page under Talent Pool Database under search for candidate getting Internal Error
    u201CAn internal error occurred. Please try again lateru201D
    Why this error coming?
    Please any one guide me
    Regards,
    Eshwar

    Hello eshwar,
    whenever there is this "An internal error occurred, ..." message in sap e-recruiting you should have a look into T-Code SLG1 and check the application log. There you will find additional information.
    If you cannot solve the problem with this additional information just post the log information here. Probably someone will be able to help.
    Kind Regrads
    Roman

  • Removing e-recruiting start page links

    Hi,
    I want to remove some links from start page of recruiter. After some debugging, i found two views through we can maintain the links for start page. These are the views i found:
    V77RCF_SP_ASGRP
    V77RCF_SP_ASGRPC
    To my understanding, view V&&RCF_SP_ASGRP is a standard view which can not be modified ( i get a alert "do not modify sap data") and the view V77RCF_SP_ASGRPC dows not have any entries by default and is customizable.
    Can I make use of these views to remove some links on start page of recruiter? If yes... how can I do that?
    Can some one help me??
    Regards,
    Nrisimha

    Removing links in a start page is done in configuration. You have to create your own start page group and assign the links. You will then assign the group to your won start page. All this is done under - under Technical Settings -> Start Pages. Since you will be creating a new start page you have to assign this new start page in the authorizations to the role of the person who will be accessing the start page.

  • E- Rec - Hiding links - Create / copy requisistions in Recruiter start page

    I use a MSS view for creating Requisitions and hence want to hide Create / Copy requisitions link in Recruiter start page --> maintain requisitions.
    Cn it be done with context changes. If yes, Can some one provide some info on the steps required.
    Thanks
    G Raj

    Hi,
    if you want to change the the appearance (grouping, links, texts) of a startpage this is completely done in customizing or better said you can define your own startpages and use some parts of the sap delivery if you like. The customizing for sartpages can be found in the IMG (T-Code SPRO) under SAP E-Recruiting -> Technical Settings -> User Interfaces -> (Settings for User Interfaces with Business Server Pages (BSP)) -> Start Pages.
    We usually define customer startpages in every project, this is really no big deal.
    If you want to remove a link from a page you should start by analysing the standard startpage as you will have to "rebuild" it. The standard startpage for the recruiter is 0003. Important to know is that IMG only contains customer customizing. The sap standard delivery is stored in own tables which can only be accessed using table tools e.g. SE11 or SE16.
    The tables for startpage customizing are named T77RCF_SP*:
    T77RCF_SP_ID(C) - Startpages
    T77RCF_SP_ID(C)T - Startpages texttable
    T77RCF_SP_GROUP(C) - Startpage groups (the blocks with a number of links)
    T77RCF_SP_GROUPT/GRPCT - Startpage groups texttable
    T77RCF_SP_LINK(C) - Links
    T77RCF_SP_LINK(C)T - Links texttable
    T77RCF_SP_ASID(C) - assignment of groups to startpages
    T77RCF_SP_ASGRP(C) - assignments of links to groups
    The table without C is the standard delivery, the one with C is the one for customer customizing.
    Just take a sheet of paper and start by getting all groups to the startpage 0003. This should be 1005, 1000, 1001, 2000, 1002, 1004, 1003 but could differ depending on release and support package. As you only want to change the 2nd group you will be able to reuse the others. Next get the links to the group you want to change. In my system it's group 1000 which contains links 1000, 1001, 1003 and 1004 according to T77RCF_SP_ASGRP.
    When you have this info you can start customizing your own startpage. you will need to create a new group in the IMG node -> Define Start Page Groups. Just use the information you find in the standard delivery and assign the 3 links you want to keep. Then create your startpage and assign the standard groups and instead of 1000 your own.
    Althought it is possible to use the same numbers for IDs like SAP I prefere using 9NNN for the ids so you always know if its standard or customer. furthermore do not forget to udate your authorization roles and add the new startpage.
    Best Regards
    Roman Weise  
    PS: of course it is your decision to hide links. But even if the managers create the requisitions using MSS the recruiters will work with their startpage only and they will have to be able to create and maintain requisitions so i am not sure if hiding the link is a good idea.

  • E-RECRUITING Start Pages and WebDynpro

    Hello All,
    I need to implement a new Link in E-Recruiting Recruiter Start Page.
    But my new link is an ABAP WebDynpro and not a BSP application.
    I followed all steps of creation.
    I Created the OTR Links, and the entries in tables: T77RCF_SP_GROUP, T77RCF_SP_ASID, T77RCF_SP_LINK and T77RCF_LOG_APPL.
    I can see the link in the Start Page of Recruiter.
    But when i click on it, the follow error is displayed:
    BSP Exception: the Application Name erc_a_class_ui_ps in URL XXXXXXXXXXXXXXXXXX is invalid.
    I have no experience with e-recruiting, but i think in the T77RCF_LOG_APPL is possible to enter only BSP apllication. Is that correct?
    If yes, how can i to point an ABAP WebDynpro apllication?
    Thanks.

    Hello João Mariano,
    As you know that you need to maintain your entry in the view table V77RCF_SP_LINKC or T77RCF_SP_LINK
    and link the same entry in V77RCF_SP_ASGRPC Assignment of Links to Start Page Groups.
    Prerequisite:
    Start page link : 9001
    Name : XYZ
    OTR Alias Link :
    External URL as ' https://mail.google.com/mail/#inbox ' or Web Dynpro ABAP URL with https://
    I am sure it will work i have done this for you in my sand box however I am unable to attach the document.
    Thanks & Regards
    Ravi Sabba
    Certified SAP Talent Management Consultant

  • HR Recruitment compare with E-Recruiting

    Hi everybody
    I've the task to discover a good Recruitment Tool for our company. At first, do you know a good website, which I can compare some Recruitment Tools together? I know, SAP has also the Recruitment.
    Now the question about SAP HR Recruitment. We have the Component version from SAP "SAP ECC 6.0".
    I'm not sure, if the SAP Standard Recruitment from HR Modul is the same like the E-Recruiting. When I've the Recruitment can I use this also for E-Recruiting? Is this the same one? Or is the E-Recruiting a stand-alone new Modul, which we have to pay it?
    Hope you can help me as soon as possible.
    Thanks OeA

    E recruiting is far better compared the the Recruitment which is available so many advantages as it can be portal based.
    This can linked to the careers tab in your company's URL  this will stream line the whole recruitment process in your clients organization.
    E recruiting is better than Recruitment, you need to pay for e recruiting separately

  • Auto refresh or reload a page on Firefox for Android ?

    Is there a way to auto reload or refresh a page on Firefox for Android ?
    I looked at the extensions but I could not find any. I am using my tablet for Google Drive Slides and unfortunately their publish web page does not force the browser to refresh a page so the content do not change. The only solution I found is to auto reload a page. Dolphin has this add on but the full screen does not hide the status bar. Firefox full screen hides the status bar but there is no auto reload a page extension.
    Can someone help please?

    Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
    The Firefox cache temporarily stores images, scripts, and other parts of websites while you are browsing. <br>
    Note: ''This will temporarily log you out of all sites you're logged in to.''
    To clear cache and cookies, do the following:
    #Tap the menu icon located at the top right corner. This is the icon with 3 bars. On older Android devices you'll have to press the hardware menu key and then tap More.
    #Tap '''Settings'''.
    #After that, you will be taken to the settings screen. In the settings screen, look under the section '''''Privacy & Security''''' and select '''Clear private data'''.
    #You will then be taken to a list of what can be cleared. Select the following 2 for deletion:
    #*Cookies & active logins
    #*Cache
    #After those have been selected, tap the '''Clear data''' button to actually clear the cache and cookies.
    Did this help you with your problems? Please let us know!

  • I'm using OXO e-commerce template, and trying to auto advance slides on home page; In jquery.main.js

    I'm using OXO e-commerce template, and trying to auto advance slides on home page; In jquery.main.js option autoslide is set to true, how do I make slides change besides clicking on switcher? ..pls help

    I'm using OXO e-commerce template, and trying to auto advance slides on home page; In jquery.main.js option autoslide is set to true, how do I make slides change besides clicking on switcher? ..pls help

  • E-recruitment-- Requisition Page

    Hi All,
    I am working on E-recruitment in ECC 6.
    I have generated report using RCF_GENERATE_URL for the employee( 0001 ) and pasted the link in the browser.the Following error was displayed. 1. How can i solve this error. Logon Error
    "Logon requires activated Single Sign-On on this server. This is not the case. Contact your system administrator"  2. My Second questions      Is there any way we can see this page without activating the Single sign-on

    Hi Ram,
    Go to Tcode RZ10 Select the Instance Profile.
    Select the Extended Maintenance Mode.
    and set this two parameters
    <b>Parameter Name                              Parameter value
    login/create_sso2_ticket                    2
    login/accept_sso2_ticket                    1</b>
    and restart the system.
    Note: this is a basis activity
    Regards,
    Rao
    Message was edited by:
            Rao

  • Logical port error when accessing e-recruiting web pages

    Hi,
    We are trying to set up our e-recruiting 3.0 and web dispatcher systems. We were receiving an error in our e-recruiting system in transaction SM20 that states “Logon Failed (Reason=34, Type=H)”.  The user is SAPSYS for client 000.  The system was attempting to log on to our web dispatcher system.  SAP suggested creating an entry in SM30, table VUSREXTID, mapping the External ID to our web dispatcher  system.  This entry helped in that we are not receiving the above error message anymore.  However, when we attempt to access the web pages we are receiving the error “Name of logical port ‘&lp_name&’ is invalid.  Prior to adding this entry we were able to access the logon page by entering the following url using an external alias (ex. https://recruiting.mphi.org/internal).  Recruiting.mphi.org is our web dispatcher system.  We do not want our e-recruiting system to be accessible from the outside.  We want everything to go through our web dispatcher.  Has anyone had a similar issue setting these up?
    Thanks!
    Heather

    Hello Heather,
    I am no specialist in network infrastructure but i remember a customer setting up a web dispüatcher szenario. I also encountered this &lp_name& error from time to time during my work.
    The error points towards damaged urls and the customer also encountered such problems when setting up the web dispatcher landscape. Sometimes the last parameter of the URL was ignored or lost. Sometimes the web dispatcher transformed the URL including the parameters. But as parameters are case sensitive transforming them to upper/lower result in errors as the system no longer recognizes them.
    Perhaps you can check the URL with which the web dispatcher is calling the sap server to find out if it does any funny things w/ the links.
    Best Regards
    Roman Weise

  • E-Recruiting start page

    I'm currently implementin E-Recruiting, and I find some problems due to delivery customizing missing entries in "Define start page" step. Could anyone provide customizing entries in tables:
    define start page, V77RCF_SP_IDC,
    define start page groups V77RCF_SP_GROUPC
    define links for start pages V77RCF_SP_LINKC
    Thanks a lot in advance
    Christian

    Hello Christian,
    the E-Recruiting tables T77RCF_SP_C (and so the views V77RCF_SP_C) do not contain any entries in the SAP delivery. These tables are customer only customizing. The SAP standard entries for startpage customizing are stored in the tables T77RCF_SP_* - that means the same name without C at the end. E.g. the customizing table T77RCF_SP_IDC contains all customer difined startpages - there is the table T77RCF_SP_ID which contains all SAP delivered startpages. These tables are not displayed in the IMG but refered in most search helps.
    E.g. if you add a link to a customer startpage group the search help displays all sap delivered links (T77RCF_SP_LINK) and the customer defined ones (T77RCF_SP_LINKC).
    Best rgds.
    Roman
    If you want to have a look at the SAP delivery you have to you any table access transaction (SE11, SE16, SM30, ...)

  • Application Name of Personal Pages E-Recruitment

    Hi All,
    We are using "rcf_generate_url" program to generate URL in E-Recruitment. Using the URL, we login to Personal Pages. Can anyone tell the application name of Personal Pages. And the application name of "Process Template" in personal pages. Also please tell how to find the applications which are linked in the URL.
    thx,
    Anand

    Did you figure this out already?  If not, I can help.
    John

  • I Recruitement - Recruiter - Candidate Page

    Hi,
    Responsibility - iRecruitment Recruiter
    Menu - IRC Recruiter Menu
    Issue 1 : In Recruiter Login-->Click any one Applicant name to get the candidate details page. In this we have tabs like Candidate Profile, Qualifications, Resumes and Documents, Applications, Communications, Interviews and Offer
    Under Applications tab I could not find any vacany details of the applicant.
    Issue 2: In the same Candidate Details page also I could not find the tab name called Offer.
    Kindly afford solutions for the above mentioned two issues.
    Thanks
    Arunsankar
    Edited by: 1000114 on Apr 16, 2013 6:31 AM

    Dear All,
    Kindly reply to this post, as it seems some patches are missing. Need guidance.
    Thanks
    Arunsankar

  • E-Recruitment start pages ehp4

    Hello experts,
    How to configure e-recruitment / e-recruiting ehp4 start pages for external candidate, internal candidate? Also how to enable/link recruiter and administrator pages from the portal?
    Help please
    Danny

    Hi,
    SAP Customizing Implementation Guide -> SAP E-Recruiting -> Technical Settings -> Set System Parameters
    SAP Customizing Implementation Guide -> SAP E-Recruiting -> Technical Settings -> User Administration.
    SAP Customizing Implementation Guide -> SAP E-Recruiting -> Technical Settings -> Periodic Services -> Define Periodic Services / Activate Periodic Services / Determine Rules for Periodic Services / Schedule Background Process for Periodic Services. Setting up business partners You must create a number range interval for SAP business partner. Ensure that an interval is indicated as 'standard internal'.
    SAP Customizing Implementation Guide -> SAP E-Recruiting -> Technical Settings -> SAP Business Partner -> Set SAP business partner for E-Recruiting / Define Number Ranges / Define Groupings and Assign Number Ranges.
    SAP NOTE : Note 874725
    All the BEST
    KRC

Maybe you are looking for