Auto Navigation to Next field.

Hi All,
I have a typical requirement. I have three fields for entering Telephone Numbers. The 1st is Area Code( Length 3 Chars), 2nd is Exchange( Length 3 Chars), , 3rd is Number( Length 4 Chars), .
I want the cursor to navigate automatically to 2nd field (i.e to exchange) when user finishes entering the 1st field( i. e three numbers in the Area Code field)
thanks in advance,

You can use 'Auto skip' property in your field.
If you go on the property palette of your item there would be this property.
And if you want more informations see the online help.
Hope it helps you,
Fabrizio

Similar Messages

Auto Forward to next field?

I have had this program for a very short time and have created my
first form. On the form I am requesting an account # that is between
6 and 7 digits using a total of 7 text fields to separate each
character in the account #.
Is there a way to have the cursor automatically tab or forward to the
next field after the maximum of 1 character is added to each field?

Rather than using 7 separate fields I recommend using a single field that has a max size of 7 digits and set a comb. The comb will be applied after you enter your info and then the comb will appear.

Auto tab to next form field

In some forms, when the user types in, for example, the area code for   their phone number, they are automatically tabbed to the cell for the 3   digit prefix and upon completing the prefix they are automatically tabbed to the final cell for the phone number. I know that the user can hit the tab key themselves, but is Acrobat capable of automatically doing this using form fields created in Acrobat in version 9 or 10 Pro?

It should be the actual name of the next field. The problem with that particular script is for a text field with a three character limit, you have to attempt to enter another character before it will set the focus to the next field.
Here's a function you can create in a document-level JavaScript that you can call in a text field's custom Keystroke JavaScript that should behave as you want:
// Document-level function
function tab_next(next_field_name) {
    // Move to next field if Enter key is pressed
    // or the user has clicked outside of the field
    // or if the number of character is the character limit
    if (event.willCommit || AFMergeChange(event).length === event.target.charLimit) {
        getField(next_field_name).setFocus();
Then call it like this as the Keystroke script of a text field:
// Autotab to the "text2" field
tab_next("text2");
This particular script will only work if you're set the character limit for the field from which it is called. There are a lot of autotab scripts that folks have created for use with Acrobat (some better than others) that address a particular circumstance, so you'll probably run across more with a search.

Field Property dialog jumping to next field

When I finish entering the field NAME in the field property dialog and tab or select with mouse to enter information in the TOOL TIP field, I am taken to the Tool Tip of the next field in the tab order. (This only happens when I paste in the field name, not when I type it in by hand.)

This is either a progam error or some strange feature built into Acrobat 9.
I discovered it doesn't matter if you paste info or type in by hand. In field propeties, when the name field looses focus the dialog automatically tabs to the next field. So, I wind up looking at the tool tip window of the following field.
If I enter the tool tip first, and then shift-tab to get up to the name this doesn't happen.
(Note: this auto field tab happens when the field navigator is open and we open the propeties dialog from a selected field by Alt- p.)

Auto populating the Notes field in XK02/FK02

Hi Experts,
I have a requirement where I need to auto-populate the Notes field with some text.
When the user clicks the arrow next to Email field a pop up comes up. In this pop up there is a Notes field. (Please see the Screen shot)
I want this Notes field to be auto-populated with "Notes".
How can I accomplish this?
Please advice.
Thanks.

Hi -
1. In SE51, go to progrram - SAPLSZA6 and screen 600, you will find in the PBO
MODULE precalculate.                                      "*981i
MODULE d0600_status.
MODULE d0600_output.
LOOP AT g_d0600_adsmtp WITH CONTROL t_control6 CURSOR
    t_control6-current_line.
    MODULE d0600_display_line.
ENDLOOP.
MODULE d0600_cursor.
2. In the 1st three module below check if any user exit / BADI is there .
(a) MODULE precalculate.
(b) MODULE d0600_status.
(c) MODULE d0600_output
If yes check for modifying the value of the field 'REMARK' in the interanl table g_d0600_adsmtp.
Example g_d0600_adsmtp(1)-Remark = 'Notes'
3. If no BADI / exit is available, then go for implicit enhancement in the perform inside MODULE d0600_output. i.e    FORM dynpro_output .
At the end of form    FORM dynpro_output - modify the internal table   ct_comm_table.
Please note - This form may be used by other programs, so you can put some conditions like restricting to trasaction code etc.

Data with "," overflows to the next field when importing data with DTW

Dear all,
When I tried to import data with DTW, for the data that includes ",", the data after "," all jumps into the next field after import.
E.g. Column A(memo): bank, United state
       Column B(project code): blank
       Result in SBO: Memo field : bank
                              Project code: United state
I have tried 2 ways.
1. Save the file as csv, and adding double quote(") at the beginning and ending of the data. However, it didn't work. It didn't work with single quote as well.
2. Save the file as txt, without amending the data at all.
It worked, however, in SBO, double quote is auto added, it becomes "bank, United state".
Please kindly advise how to handle such case.
Thank you.
Regards,
Julie

Hi,
Check this if it is useful :
Upload of BP Data using DTW
Rgds,
Jitin

ADF Faces -- af:inputText + autosubmit + navigate to next field. How?

Hi,
I have the following problem:
I have an ADF Faces inputText component. I have set its autoSubmit property to "true" because I wish to do some additional processing of the value.
<af:inputText autoSubmit="true" ........... />However, if I change the value and press the "Tab" key, the navigation to the next field does NOT occur. I can only navigate to the next field, if no change has been made to the value of the inputText field.
Does anybody know how I can force the focus to pass on to the next field even if the inputText's value is changed?
Best regards,
Bisser

Here's a super-minimalistic sample:
<afh:body>
 <h:form>
 <af:inputText label="Name:" autoSubmit="true"/>
 <af:commandButton text="Submit"/>
 </h:form>
</afh:body>Just type something in the field and then press the TAB key. The navigation won't happen.
We use IE6 because that's the client's requirement. The final product must run on IE6. I have tried with IE versions:
6.0.2900.2180.xpsp.050622-1524 with SP2
6.0.2900.2180.xpsp_sp2_gdr.070227-2254

Nokia 330 Auto Navigation

Has nobody out there got a 330 Auto Navigation system?
I lost the car lighter end of my in-car charger over six months ago. Despite many emails to the Nokia help centre and to Nokia shops, nobody could help me. Not even supply me with a new one!!
Now I am informed that Nokia do not supply this charger any more. It is a DC3 12/24V input, 6V 2A output.
No help from Nokia then!!
Can anyone help me. Even a mains charger would help. If my sat nav has not been charged for some months will it lose it's data?
Cheers

the closest match to the dc-3 is the dc-4 - not sure if it would be compatible though - mebbe get nokia to try testing and confirm this?
if my post helped u out, please click the Star next to it to add some KUDOS to my name

Auto-Advance to a field if previous field is disabled?

Hello,
I have an InfoPath form where I have a a field that depending on the choice selected makes the next field required or disabled. If the field is disabled, I would like to be able to advance automatically advance to to the third field. How can
I accomplish this? I'm sure it could be conditionally formatted, but I am just not sure how to accomplish it. Please help.
Kind Regards,
SharePointPonderer

Hi ,
According to your description, my understanding is that you want to Auto-Advance the third field if the second field is disabled.
For your issue, you can add a section and put the second field into the section. Then create a rule on the section that when the first field is equal to “disable” , hide the section. And create a rule on
the second field that when the first field is equal to “disable”, disable the second field.
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Eric Tao
TechNet Community Support

How can I get netflix on Apple TV to auto play the next episode?

How can I get netflix on Apple TV to auto play the next episode?

I don't have the answer to this question, and yes, I checked the "I have the same question, too" box.. But so did 30 some other people.. So, I've scoured the web and looked high and low into the Apple TV device.. HOW CAN I DO IT? My playstation 3 did it[.. My WDTV box top I've had for 2 years can do it! My Smart Vizio TV [netflix app built in to the tv] can do it! My Apple ipad can do it. My iPhone can do it.. So, can my Apple TV do this? Or Not?

How can I change the behavior of the Green Enter button when filling out a field in a form? Current it submits the entire form, I would like it to tab to the next field instead

When using Firefox for Andriod:
When filling out a field on a form, they keyboard has a Green Enter button that submits the entire form. However, there are multiple fields on the page, and I would like it to tab to the next field. At the very least not submit the form.
Also, is there a way to configure the keyboard that shows up for each html5 input type?

They keyboard that shows up has the large "Green Enter" go button, a backspace and some arrow keys, but no tab button.

Digital Signature - Auto-Populate Multiple Signature Fields

Hello,
I am in the process of testing digital signatures with PDFs. I have a Topaz Signature Pad working in conjunction with Acrobat 9 and Reader 9 so that I can insert digital signatures with no problems.
We are wanting to take this a step further and streamline a particular business process. Does anyone know of a way to have a digital signature auto-populate multiple designated signature fields? We have about 15 documents that require an employee signature in multiple places and rather than having someone sign a document over and over again, we'd like the option for a single signature that auto-fills in all the required signature fields.
This doesn't necessarily have to work with Topaz Signature Pads. I am completely open to other suggestions, products or methodologies for making this work as long as something can be automated to auto-fill multiple signature fields.
Many thanks to the forum!
Regards,
Geoff

Hi Geoff,
Maybe there is no need to re-inent the wheel. Auto-population of forms is a feature of SignDoc - se http://www.signplus.com/en/products/signdoc/features.php#Form_Preparation
Auto-filling of forms is requirement which can be achieved through various processes.
In combination with Adobe LiveCycle this is executed in the case study of Adobe/SOFTPRO.
http://blogs.adobe.com/security/2010/01/adobe_secured_customer_showcas_8.html
http://www.adobe.com/cfusion/showcase/index.cfm?event=casestudydetail&casestudyid=762388&l oc=en_us
However there are also other ways to move forward depending on the envrionment you are using.
If you are based in the US you may want to get in touch with Rod Vesling SOFTPROs E-Signature Specialist, based in CA near LA, for a chat. His office phone is 805 435 1214. His email is [email protected]
Depoending on the deice of Topaz you are usinfg you may start right away as quite a decent number of Topaz tablets are supported by SignDoc. However the best idea might be to give Rod a ring and idscus your business requirements in detail.
Kind regards
Joerg

Auto scrolling dynamic text field(news ticker)

> This message is in MIME format. Since your mail reader
does not understand
this format, some or all of this message may not be legible.
--B_3272625483_2679871
Content-type: text/plain;
charset="US-ASCII"
Content-transfer-encoding: 7bit
Does anyone know how to make a scrollable dynamic text field
scroll on its
own and also with user interaction?
Thanks in advance for your help.
Bill
--B_3272625483_2679871
Content-type: text/html;
charset="US-ASCII"
Content-transfer-encoding: quoted-printable
<HTML>
<HEAD>
<TITLE>Auto scrolling dynamic text field(news
ticker)</TITLE>
</HEAD>
<BODY>
Does =
anyone know how to make a scrollable dynamic text field
scroll on its own an=
d also with user interaction? 
 
Thanks in advance for your help. 
 
Bill
</BODY>
</HTML>
--B_3272625483_2679871--

I found this:
http://www.kirupa.com/developer/mx/dynamic_scroller.htm
I copied the actual scroller and put it in my .fla and it
worked! Now if I can only figure out links in XML...

Text in form field disappears when I move to next field

I have a PDF form for doing estimates for my business. I e-mailed it to myself and open it up on iPad. Then I selected open in Adobe.
I can enter data in any of the fields just fine but when I move to the next field the data I previously entered disappears unless I go back to that field to edit.
I tried e-mailing a document to myself and when I opened it up on my laptop computer the data fields are empty regardless of whether I highlight that field.
Can anybody help me out with this problem?
Thank you, Bob Kroth
[email protected]

Hi Pat,
Well I'm not sure what doc you were looking at but here is a similar pdf.
I have both Adobe and Scan soft PDF software. If you mouse over the area
where the address would be typed in and click on that area the text that is
there will appear. When you click to new field text disapears. I typed in a
price for mowing and when you click on that field you can see the price. I
have also tried this on Adobe for iPhone and have the same problem.
Sorry if I'm not explaining this clearly.
Bob 612 889-5720

Auto populate Infopath 2013 fields after selecting a specific dropdown option.

Auto populate Infopath 2013 fields after selecting a specific dropdown option.
Hi.
I have a Sharepoint 2013 list with three fields. Code, Section and Sub Section.
I would like to be able to have the form autopopulate the Section and Sub Section fields when a value for code is entered.
How would I go about this please?
Thanks
Jon

Hi JonMorgan,
Based on your description, my understanding is that you want to achieve that the second dropdown gets populated depending on what the first dropdown is set to.
To achieve your requirement, creating cascading dropdown fields with InfoPath.
Please refer to the following links about cascade drop down in InfoPath form:
http://msreddysharepoint.blogspot.in/2012/12/infopath-2013-web-browser-creating.html
http://www.pointbeyond.com/2011/11/20/cascading-dropdowns-in-infopath-2010/
Best Regards,
Lisa Chen
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Lisa Chen
TechNet Community Support

Auto Navigation to Next field.

Similar Messages

Maybe you are looking for