Auto-Populate a Textbox in BSP

I would like to write an ABAP program that references an existing BSP application.
The ABAP program needs to read through a file - and pass fields from the file to the BSP screen fields. Then the ABAP program needs to execute the SAVE operation on the BSP screen.
Any guidance from anyone?
Thank you in adv

Hi,
you´re trying to mix oil with water !! an ABAP programme is very independent from a BSP application and you´ll never make them work together, specially for clicking a button.
Either you write the programme, which reads the file and saves the information directly in DB tables, which is later read by the BSP application for display or you extend the BSP application for reading the file and executing the data load (?) from within the BSP application.

Similar Messages

Auto Populate Textbox in sharepoint Visual Webpart

Hi all,
I have requirement in My organization. all the web users need to be auto populating while typing letters.
I have done this earlier in .net with web method but web method scenario is not working in visual webpart
Can any one help me out ....
Thanks
Nag

Hi Nag,
From your description, my understanding is that you want to ac auto populate/suggest all the users from current web in textbox in visual webpart.
You could use jQuery to AutoComplete text box in SharePoint 2010 Visual Web part. Please refer to this article(you need to replace the data source ”availableTags”
in the demo):
http://sharepointwings.blogspot.in/2012/05/autocomplete-textbox-using-jquery-in.html
Please refer to this article about how to add jQuery to SharePoint Visual Web part:
http://sharepointdragons.com/2012/04/18/adding-jquery-to-a-visual-web-part-and-then-implement-parentchild-radio-buttons/
Best Regards,
Vincent Han
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Auto populate in forms

I'm creating textboxes in a form where multiple users will fill out their contact info. As I fill in the text box the lines below a given column automatically populate with the information above. So if in line 1 I filled out John Smith for name When I began typing for line 2 John Smith would auto populate. I'm not sure because the PDF was created before I started my current job but I think it was a PDF created from a word doc. Any advice would be much appreciated, thanks.

If the field names are the same, this is the behavior that you will get. So if you want to avoid this, simply give the fields unique names.

Is there a way to auto-populate text based on a selection?

I honestly don't even know how to word my question haha... so the title may be misleading...
For my job I need to fill out indesign files, and at one part of the file based on the state a person is from I need to paste a specific e-mail in several places.
Is there a way where maybe I create a dropdown menu of the several state e-mails I can choose from, and upon choosing it auto-populates that choice into the several other places?
I guess, is there a way where if I make a select or input text into one area it will generate in the other areas as well?

Maybe you need some kind of clipboard manager to choose several texts to paste
http://lifehacker.com/5298615/five-best-clipboard-managers

How do I auto populate a text box if a check box is ticked in Acrobat XI Pro?

Basically, i have been asked to create a catalogue of sorts for my organisation with a form at the end that will be completed by the end user. it will be a catalogue of books and toys that people can request to borrow from us. Its all specialist equipment that we loan out for disabled people. When they are scrolling through the catalogue i would like there to be a check box and if they would like to borrow that item they would tick that box and any other products that they would like to borrow. Is it possible to have a text box that auto populates with a list of the items they have selected. the form would be similar to the one below. it the box next to Products to borrow i would like it to add products as they tick the boxes in the preceeding pages. I would be happy to share an example document if needed. thanks in advance for any help.
Name
Address
Products to borrow

Thank you for your willingness to help.
The problem with a drop down is that it would not present all options when printed, and some of our users will be completing this form manually (printed). All options need to be displayed.
Here's an example:
SELECT PREFIX:
A12
B12
C12
They can check one of the above and then based on what they select, I want the next box (a text field) to pre-fill with their selection.
So if they select A12, the text box would automatically fill with A12.

Auto-populate fields in Custom Object Based on Another Record

Hello,
I am hoping to auto-populate a few default values in a new Custom Object record based on an associated Lead record. The layout is this:
I use the Lead record to take care of most of the information in the sales stages until the product is sold. The Lead record has fields to record information for a one product sale. The sales person can then use the Custom Object (called 'GX Additional Product') (which shows up in the Related Information section of the Lead record) to add additional items to a sales order request. Many of the fields in the GX Additional Product (custom object) record are identical to fields already filled out in the Lead record.
What I would like to do, is when a new GX Additional Product (custom object) is added to the Lead record, those identical fields already filled out in the Lead record, by default, populate the corresponding fields in the new GX Additional Product (custom object) record.
Is this possible? Is this something that can be done with JoinFieldValues? If so, I've had a bit of confusion trying to set up a JoinFieldValues expression.
If you have any information to share that would be helpful, that would be greatly appreciated! THANKS!

Hi,
You can use JoinFieldValue to Custom Objects from other entities, cause you will have other objects' ID recorded inside the CO's, when you open a new detail record associated with the parent. Make sure your custom object is showing as a detail section (N:1) into lead´s main page. Try with one field first, using the exact syntax provided at samples listed at product documentation.
regards,
Flavio Amorim
Brazil
www.triscal.com.br

PROBLEM WITH AUTO POPULATE IN THE GOOGLE SEARCH BOX

When I type in the google search box it auto populates search terms as it always has. However since upgrading to FF4 when I click on the one I want to go to ... nothing happens. I have to type the full search every time. I don't see this issue anywhere in the forum, am I the only one having this problem?

How Firefox is opened should not matter.
It could be the work of one of your add-ons, or even add / mal-ware.
Open your '''Add-ons Manager <Control><Shift > A''' and make sure you
know what each one is and what it does.
Some added toolbar and anti-virus add-ons are known to cause
Firefox issues. '''Disable All of them.'''
Also, check the programs that are on your computer
'''Windows:''' Start > Control Panel > Uninstall Programs.
'''Mac:''' Open the "Applications" folder.
'''Linux:''' Check your user manual.
Go thru the list. If you find something that you don't
know what it is, use a web search.
'''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-caused-malware Troubleshoot Firefox Issues Caused By Malware]''' {web link}

Auto populate for fields in ZTable

Hi
I created a Z Table with 10 Fields,Out of those 2 fields are timestamp and Created by.
Timestamp and Created by are made Output only fields in Table Maintenance Generator
SE11> ZTable>Table Maintenance Generator>Environment>Modifications-->Events
Type -5 concatenate sy-datum sy-uzeit into ZTable-Timestamp.
With which when user performs a manual posting in the table and save a record in SM30 the Timestamp is populated automatically.
Similar to these how can i Auto Populate the Created By with the user id (logon id) of the user who made the posting.
I tried to create a new event of type-5 - System is not allowing me to create a event another event of same time
How can i enhance the exisisting event so that i can get Auto Populate of Created By
Thanks in advance

Hi friend,
Put your code which populate user name inside form of event 5 (maybe below your existence code).
regards,

Auto-populate PDF opended in Reader

Do anyone know of a way to Auto-populate a Form PDF created with adobe designer and opended in Adobe Reader. I do not need to save, I just need to Autopopulate the Form fileds and then print.

Autopopulate with what?
Mike

Auto-populate of SHELL_shellName_shell Upper form DE only functions in one single-instance project shell. The DE in the BP Upper Form needs to auto-populate in two separate single-instance shells. How can I get this DE to autopopulate in both?

The Unifier environment
contains two single-instance project shells, INF and PBS, and two multiple-instance child project shells, INFS and
PB. There is a single instance, non-workflow
business process, ‘Project Information’ that contains a data element in the
upper form definition, Project ID. The Project ID is set to auto-populate from the multi-instance “INFS”
project shell attribute, which is populated manually.
Issue: The auto-populate functionality for the
Project ID ‘Shell_shellName_shell’ data element within the single-instance
Project Information BP only functions within one of the shells, either
INFS or PB, but not both. The INF and INFS shells are currently deployed
to production, PB and PBS shell are not.
It is critical that Project ID ‘Shell_shellname_shell’ data element is populated correctly in the
Project Information upper form of both shells, INFS and PB,
because that data element is referenced by multiple business processes and
integrations.
The attribute form definitions for both single and multiple instance project shells are identical. The Project ID utilizes the same data
element ‘SHELL_shellName_shell’ as is defined in both shell attribute forms
(INFS and PB).
The data definition source is a Unifier system-level variable, SYS Shell
Name (String, 128, Text Box)
Potential Solutions:
1. Create a Project ID DE of another data type which can
be successfully auto-populated from either shell. Drawback: all BPs and integrations which
reference Shell_Shellname_shell will need to be rewritten.
2. Investigate converting the Project Information single-instance
to a multi-instance BP, and create a
separate instance for each single-instance shell type. Same Drawback as Option #1, but with additional
rework. Most likely Project Information
would have to be recreated as a new BP.
Not sure that this option would even work.
3. Create a separate Project Information BP for PB. Drawback: Two separate BPs for Project Information would
need to be created. All existing BPs
refer to Project Information, so this option could potentially invalidate the
ability to use the existing BPs in the PB shell.

Was it really necessary to post the whole API description?!?
Locale[] locales = Locale.ENGLISH();ENGLISH is not a method in class Locale, so do not add the braces "( );".
Also, the constant ENGLISH is not an array, but just a single Locale object.
You didn't say what your problem was. What do you want to achieve with your program and what is it that you don't understand?

Auto populate text fields with a trigger such as entering text into input fields in ADF

Hello all,
I am not able to auto populate text fields with a trigger such as entering text into input fields in ADF.
I tried AdfFacesContext.getCurrentInstance().addPartialTarget(val); in the back end using setter method of input text field.
its not working ..
is there any way to achieve it
Regards,
Shakir

Hi,
Always mention your JDev version.
The valueChangeListener would fire only when you set the autoSubmit property of the field to true. Can you elaborate your requirement? What do you mean by related data? Are you performing some sort of search?
If you want to get the value you entered on the field, just set autoSubmit to true and get the new value from the valueChangeListener. If your requirement is something like as and when you type, do something, you need to check out this approach :https://blogs.oracle.com/groundside/entry/auto_reduce_search_sample
-Arun

How to auto-populate dates in a calendar based on radio buttons?

Hi,
I'm trying to create an availability form that is submitted on a monthly basis. What I'd like is to have a radio button the user could click to indicate what day the first of the month falls on (Monday through Sunday), and have fields auto-populate with the remainder of the dates on the calendar. As it stands right now, I've got the radio buttons and the text fields, but I'm running into serious issues getting the text fields to auto-fill based on the selected radio button.
I've labelled the radio button group "First Day of Month" and the individual values are "Monday" "Tuesday" "Wednesday" "Thursday" "Friday" "Saturday" "Sunday" and "Start". The "Start" button is hidden but is checked by default.
My text fields are even simpler: "Monday 1" "Monday 2" "Monday 3" "Monday 4" and "Monday 5" (and then, obviously, repeated for each day of the week.
I am horrible at scripting, so I think that might be where I'm running into issues. What I'd like to put is something like this (only, you know, functional, and for each days' text value):
For "Monday 1"
if "First Day of Month.value" = "Monday", "Monday 1.value" ="1"
else "Monday 1.value" = ""
For "Wednesday 3"
if "First Day of Month.value" = "Sunday", "Wednesday 3.value" = "11"
if "First Day of Month.value" = "Monday", "Wednesday 3.value" = "17"
if "First Day of Month.value" = "Tuesday", "Wednesday 3.value" = "16"
if "First Day of Month.value" = "Wednesday", "Wednesday 3.value" = "15"
if "First Day of Month.value" = "Thursday", "Wednesday 3" = "14"
if "First Day of Month.value" = "Friday", "Wednesday 3.value" = "13"
if "First Day of Month.value" = "Saturday", "Wednesday 3.value" = "12"
else "Wednesday 3.value" = ""
For "Sunday 5"
if "First Day of Month.value" = "Sunday", "Sunday 5.value" = "29"
if "First Day of Month.value" = "Friday", "Sunday 5.value" = "31"
if "First Day of Month.value" = "Saturday", "Sunday 5.value" = "30"
else "Sunday 5.value" = ""
Is this possible? I have no doubt there's a better way to do it (with proper coding and everything), so any help would definitely be appreciated!

Hello,
Which sharepoint edition you are using? I would prefer to customize your list form in infopath form then add new connection which will connect to your SQL. Later you can filter data based on cust ID. Here is the link to add connection in infopath:
http://office.microsoft.com/en-in/infopath-help/add-a-data-connection-to-a-microsoft-sql-server-database-HP010092823.aspx
If you want to do it via code then simple ADO.NET connector will help.
http://www.codeproject.com/Articles/33862/Connecting-to-Database-Using-Custom-Webpart-in-Sha
Hope it could help
Hemendra:Yesterday is just a memory,Tomorrow we may never see<br/> Please remember to mark the replies as answers if they help and unmark them if they provide no help

Auto-populate checkboxes in a form

I'm working on a form in ApEx that has several checkbox fields on it, and am having some trouble getting them to auto-populate. Based on a selection on the welcome page of this application, certain checkboxes should auto-populate so that users should be able to opt out of certain criteria on the form.
Here's an example:
On page 1 of this application, the user chooses what type of report they are requesting. Their options are: "Internal Use" "Non-Solicitation Mailing" "Solicitation Mailing" "Solicitation" "Invitation" and "Other." On the next page (the form itself), there are several different conditional items called "(type of request)_Exclusions," and all of these are checkboxes based on a Static LOV. For example, for a request that is listed as "Internal Use," the checkboxes for "Deceased" "Lost" and "No Mail" should be automatically checked so that the user has the option to opt out, and their values should be returned to the database.
Any help would be greatly appreciated.

Hi,
You want the checkboxes to be checked by default in the form while creating a new record in the database. Suppose that form page number is 7 and it has a hidden item P7_ID (refererring primary key of database table) and checkbox item P7_IS_ACTIIVE (refererring IS_ACTIVE column of database table and can have values 'Y' or 'N'). Now edit P7_IS_ACTIIVE item and scroll to Default section.
Type Default Value = case when :P7_ID is null then 'Y' end;
Default Value Type = PL/SQL Expression
In the List of Values section type List of Values Definition = STATIC2:Active;Y.
Click Apply Changes and create Automatic Row Processing (DML) process On Submit -After Computations and Validations for insert, update and delete of database table records. Type Item Containing Primary Key Column Value = P7_ID.
Whenever you create a new record the P7_IS_ACTIIVE is always checked.
Else if this is not what you need you can refer the example posted by Denes as 'Checkbox Y/N' on http://htmldb.oracle.com/pls/otn/f?p=31517:123:1499221457271585::NO
Thanks,

Auto populate values in the the database table

Hi All,
I have a requirement where user enter values in one of the ZTransaction. This will update a Ztable. So the new requirement is to add two new columns in the fields, which is completed. Now this two new fields are supposed to auto populate values based upon the key field .
The transaction code is defined with Transaction as SM30 and Default values as
Name of the screen field     value
Update                               X
VIEWNAME                      "table name which the values are updated".
Please let me know how to do this.
Thank you!!

Hi Swetha,
I am unsure of what you are trying to accomplish so I will make a few assumption and perhaps you can find some benefit in it.
I suppose you are trying to add new fields to a custom (Z) database table.
If so then use SE11 to add the two new columns.
After this is complete then rebuild the table maintenance by using the following path: SE11-> Utilities->Table Maintenance Generator. (Remember to double check the Recording Routine Radio button.)
If the user needs fields automatically populated then check the following link. It describes how to use table maintenance events. I suppose you need to use Event 01 and Event 05.
http://help.sap.com/saphelp_nw04/helpdata/en/91/ca9f0ea9d111d1a5690000e82deaaa/frameset.htm
Good luck and reward points if helpful,
AK
Moderator message - Asking for points is against the Forum's RoE
Message was edited by: Suhas Saha

Using JavaScript to auto populate a field based on numeric value of a separate drop down field

Hello, I am trying to set up a simple, I hope, javascript which will enable to me auto populate one field based on the numberic value of another field using Acrobat Pro XI.
Essentially I have 2 drop down fields (we'll call them DD1 and DD2).
DD1 is the sum of 8 preceding drop down values. That sum can be anywhere from 0 - 40. Whatever that sum falls within a range which identifies a rating. The ratings and ranges are below:
0-8: Non-Performer
9-16: Low Performer
17-24: Performer
25-32: High Performer
33-40: Exceptional Performer
DD2 is where the rating ("non-performer", "low performer", etc.) will be captured. Instead of requiring the user to look at DD1, determine the value, and then identify and input the rating manually, I would like DD2 to auto populate the rating based on the value (sum) in DD1.
For example, if DD1 shows a value of 27 then DD2 would auto populate "High Performer". So how do I write this code or execute this? In excel I would use an if, then statement. Is there something similar in Acrobat Pro XI.
Any help is greatly appreciated. Thank you in advance.

If you use a text field, the custom calculation script could be:
// Custom calculation script for text field
(function () {
    var s = getField("DD1").valueAsString;
    // Blank this field if input is blank
    if (!s) {
        event.value = "";
        return;
    // Convert string to number
    var v = +s;
    // Set this field's value based on the input
    if (v <= 40 && v >= 33) {
        event.value = "Exceptional Performer";
        return;
    if (v < 33 && v >= 25) {
        event.value = "High Performer";
        return;
    if (v < 25 && v >= 17) {
        event.value = "Performer";
        return;
    if (v < 17 && v >= 9) {
        event.value = "Low Performer";
        return;
    if (v < 9 && v >= 0) {
        event.value = "Non-Performer";
        return;
    // If none of the above fit, blank this field
    event.value = "";

Auto-Populate a Textbox in BSP

Similar Messages

Maybe you are looking for