Auto SAVE to excel

Hi Folks,
I have a requirement like this, when ever a user runs obiee report it has to store in excel file automatically at the specified destination folder.
I mean to say that the user no need to clikck on "Dowload" option explicitly.
I sthis achievable ? Please help out in this !!!
Thanks in Advance.

Hi Siva,
As per my knowledge we don't have such option but we can do one way.
Using IBOTS you can store specific report and specific time in specific location.
Note : Using JS script.
Are you going to implement this way send me your mails id will send you js script for doing this.
Award points it is useful.
Thanks,
satya

Similar Messages

The Versions and Auto Save functions do they work with Office 2011?

I recently installed LION on my Apple Pro. However the VERSIONS and AUTO SAVE functions do not seem to work with OFFICE 2011 Word and Excel. Does anyone know why?
Gabriel

Waiting for Microsoft to update them

Numbers 3.1 "Couldn't auto-save document"

I have a very basic smallish spreadsheet with no forumlas, formating, etc and it won't save after the initial save. When I attempt to save I get this: "Couldn't auto-save document". I checked the file in Finder and it wasn't modified.
I won't save to CSV or Excel formats either. I've tried copying and pasting the table into Excel 2007 and no luck.
OSX 10.9.1, Macbook Pro Retina 2012
Any ideas? I haven't found advice on the Web. Fortunately I have Excel with VMware and Win7 and Open Office and Libre Office on the Mac side.
Jim

I saved my work by copying the table to an Open Office spreadsheet.
When quitting Numbers I received this message:
[filename} is on a volume that does not support permanent version storage. The filename was my file's of course. I tried to save this file on my MBP SSD and on a network hard drive that is working fine for everything else.

RE: Auto Save working on Office 2011

After upgrading to OS Lion Auto-Save/Versions will not work with my Office 2011 Excel or Word. Any suggestions?

Microsoft Office does not currently support Lion's Auto-Save or Versions functionality. Microsoft would need to add that.

Auto-save in Logic 8

Hey Guys
I've been trying to find an option for auto-save in Logic (and to set how often it does this)... but I can't find anything...
Does it just do auto-save in the background? Or is there no auto-save feature?
It's easy to forget to keep saving in a long session and would be nice to know Logic does it for you!!
Cheers
Mike

I'm sure that Logic will never need auto save.
the reason is: Logic have a .crash save function...
it works great... (if you don't use 3rd party plugs with false Audio Units validation Pass.
I'm a Logic user from the Notator version...
Auto save is dangerous...
the only usefull thing should a Fix with save before Crashing happen
Auto save is not "intelligent solution"
*Logic 9 should be comes with an intelligent way to save function that works ONLY WHEN AND IF NEEDED*
I'm sure that Logic 8.1 will solve the .crash issue with 3rf party plugs that are intentionally developed with only AU version bugs.
this is another of the "milion" fermusic ideas about sh*t auto save dangerous and *really obsolete* function
No Auto save... *vote for an intelligent way to automatic save function*
(vote for fermusic )
Thanks... expacially focused to Bee Jay and Erik

I have a site I do business with. They do not authorize passwords unless a dealer. I do no have on an auto save function, as I want to type my passwords in ea

I have a site I do business with. They do not authorize passwords unless you are a dealer. I do not have passwords on an auto save function, as I want to type my passwords in each time for security. My password for this site will only work a short WHILE, AND THEN it will not be recognized by the site and I cannot get in.
Then I must contact the company to reset or clear it manually on their end so it can be reset. They always give me the SAME SETUP PASSWORD to use. I use it, then I RESET PASSWORD on my end. The computer seems to remember my user NAME AT least on my computer as it comes up once I start typing the username in. They SAY IT is a settings issue on my end. I do not have this problem on any other site even THOSE WITH higher SECURITY. I need to FIX the issue OR may LOSE ACCESS To the site as is very aggravating for them and they say other have had the problem but usually with chrome but never constantly.I am not that computer literate ,but my husband is an IT Security professor and textbook writer but says doesn't really know Firefox. I do not really want to store passwords on computer as have been hacked several times. He and I do not understand some of the terms mentioned. since it is not a problem with other sites it should be fixable. Please me help using terms I or my husband can understand without having to give Firefox all my passwords. I would be happy to set up something different just for this one site if I need to but need easy instructions. Have cleared the cookies before but it still happens. What setting do I need to change or set to fix this? the other questions that come up seem very different and do not apply. FF 22 now but happened w other FF versions.

I'm having a little trouble understanding the part about your password having to be reset. Why is that happening??
Let's start with Firefox's settings:
(1) You can configure the password manager feature on this tab:
orange Firefox button (or Tools menu) > Options > Security
There is a checkbox to enable/disable the feature.
There also is a "Saved Passwords" button to review and remove any passwords you do not want Firefox to keep.
That tab also has a feature to set a Master Password so that no one can use your saved passwords without knowing the Master Password. You may need to exit Firefox in order for Firefox to ask for that again.
Related articles:
* [[Password manager - Remember, delete and change saved passwords in Firefox]]
* [[Use a Master Password to protect stored logins and passwords]]
(2) Site-specific permissions
If you want to use the password manager for other sites but NOT a particular site, you can configure that in the Permissions Manager.
In a new tab, type or paste '''about:permissions''' in the address bar and press Enter.
After the page loads, use the search box in the upper left corner to narrow down the list to the site you want to configure. Highlight the site on the left side, and on the right side, choose Block under Store Passwords.
(3) Form autocomplete suggestions
Separate from passwords, Firefox remembers entries you've made into forms (in most cases) and lists the matching ones below the form field in a drop-down.
To clear a suggestion, press the down arrow key to highlight it and press the Delete key.
To turn off this feature, see this article: [[Control whether Firefox automatically fills in forms with your information]].
To review and selectively edit or delete form history entries, you need an add-on. For example, you could try this one: https://addons.mozilla.org/firefox/addon/form-history-control/

No column heading in second page in alv report when save in excel file

Hi Expert,
How can i remove the column header from Alv report when program execute in background and save in excel file right now
its comming column header in each page. Client dont want header column in excel from second page. is this possible?
with regards
chandan_viji

Hi Ravi,
thanks for reply i have solved this problm throug line count and NEW-PAGE LINE COUNT 10000 bcoz client want output in excel file only one page header.
with regards
chandan_viji

Cannot save the excel report in my application

Hi I wrote a program which can save the data to an Excel report. It runs perfectly on my own computer. After I built the application (exe file), and run it in another computer, which can not save the excel report. On my own computer, it has LabVIEW 2011 and report generation toolkit for Microsoftoffice; and on the other computer, I installed the LabVIEW runtime engine. Did I miss installing some other support software? Can anyone tell me why this is not working?
Thanks a lot,
Jane

Do you have Excel installed on the other computer?
I also suggest that you read this page : Including Report Generation VIs in Stand-Alone Applications (Report Generation Toolkit)
Hope this helps
When my feet touch the ground each morning the devil thinks "bloody hell... He's up again!"

Why does Apple say that Numbers can open and save Excel files, when in actuality, it can only open .XLSX files and only Export to Excel (not save-as excel)?

When attempting to open .XLS files in Numbers, the format is not recognized. When the format is .XLSX, the format is recognized. Why is it this way? It's still much more common for folks to have the .XLS file format on their excel files. Why would Numbers not be backwards-compatible?
Additionally, to state in the benefits of this program that one can save to 'Excel' is a little misleading. You can't save to anything except .numbers. Sure, you can export to Excel (with file extension .XLS, I might add), but you can't save or save-as.
Does anyone else see the irony in being able to export to .XLS but not be able to open an .XLS?
There is something to be said for clarity.
You can't expect folks to have Numbers and Excel on their systems, so how else are they supposed to open .XLS files in Numbers?
And I don't need to see another advertisement for NeoOffice or OpenOffice here, thanks. I'd actually like Numbers to be a little more sensible.
That is all.

When the advertisements were written, there was no Lion so we were able to Save As Excel.
At thiqs time there is no longer Save As command under Lion but the feature is always available.
When your editing task is ended, you are free to use this scheme:
File > Duplicate
File > Save and in the dialog you will have the option save as Excel.
Numbers isn't and I hope that it will not become an Excel editor.
Its resources contain a flag defining it this way.
I posted several times a script editing this resource.
This morning I'm not in a mood allowing me to do your duty.
Search by yourself in existing threads with a keystring like
viewer AND editor
Yvan KOENIG (VALLAURIS, France) jeudi 27 octobre 2011 09:40:23
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community

How do I auto save all newly created contacts to a pre-determined group in Maverick? Could do this on iTunes, can't do it on iCloud...

Hi,
Before upgrading to Maverick, I used to sync all my contacts via iTunes.
iTunes used to have an option to "Add contacts created outside of groups on this iPhone to: (drop-down)".
I had created a group called ' RECENTLY ADDED ', so that every time I saved a new number whilst meeting people / networking, etc, it would auto-save to that group. I would then sync via iTunes, and voila- all my new contacts would be in there.
As a marketer, I allocate my contacts into various complicated groups... so from there, I would proceed to move each contact into their relevant group, and then 'delete' from group (not delete completely). I would repeat this step until all contacts were moved out, leaving an empty 'recently added' group.
The next time i was out networking/saving new numbers, the process would repeat...
Now that I have upraded to Maverick and using iCloud syncing, I cannot find this feature.
The previous method I used worked brilliantly, and I do not always have time to add notes, etc (for a smart group) when saving new numbers.
I'm struggling to find a solution now that I'm using the iCloud syncing service...
Any suggestions to make it easy??

If the information is in iTunes on the computer you have synced with in the past another sync, being sure you select the items you want on the iphone, should copy those things back to the iPhone.

HT5824 I've been using numbers for iPad and I accidentally deleted a column. And the auto-save feature saved that and now I can't undo it. Does iCloud storage have backups of saved files from like 10 minutes ago? I have number

I've been using numbers for iPad and I accidentally deleted a column. And the auto-save feature saved that and now I can't undo it. Does iCloud storage have backups of saved files from like 10 minutes ago? I have numbers synced to iCloud.
I tried to undo it but the app crashed.
I am hoping there's like a previously saved version of my file in iCloud somewhere.

No, iOS does not do short term incremental back ups to iCloud such as you get with Time Capsule.It backs up when you do soo manually, or if set properly, when the device is plugged in and connected to WiFi. It will not have saved your changes as of 10 minutes prior.

[OIM] Error in Direct Provisioning (with auto save form) - GTC DB App Table

Hi,
I am getting an error when setting up direct provision of a GTC DB App Conn using OIM access policy (and group membership) or through manual provisioning with prepopulate and auto save form.
Manual provisioning with prepopulate ONLY (not with auto save form) WORKS!!!
Some information about my OIM config:
- Prepopulate adapters are set up on both forms (parent and child)
- "Auto prepopulate" and "Auto save form" are set up at Process Definition
- For direct provisioning, I have created an access policy with an associated group which has a membership rule
What it is working:
- Provisioning manually, using prepopulate adapters only, not auto save form. Both tables are updated properly
- All *3 tasks are called and finished with status=Completed*: "System Validation", "Create User" and "Child Table UD_<connector child table name>_US row Inserted"
Testing direct provisioning:
- I have tested adding the resource manually with prepopulate and autosave form configured, and also through access policy/group membership. The error is the same on both tests
- The resource is displayed as provisioned and it is created an entry in the parent table of the resource, but not on child table
- I also observed that only: "System Validation" and "Create User" tasks were executed (status=Completed). But it is missing the task "Child Table UD_<connector child table name>_US row Inserted"
- The error log info displays only an error regarding to UGP table (Groups info) but I am not sure if that is the cause of entry creation on child table.
It seems the SQL stmt tries to get ugp_name (group name) using ugp_key but that has null value.
"SELECT ugp_name FROM ugp WHERE ugp_key=java.sql.SQLSyntaxErrorException: ORA-00936: missing expression"
Note: When testing manually (without auto save form), I got "SELECT ugp_name FROM ugp WHERE ugp_key=1" which it is the same SQL stmt but the value is provided.
My guess:
- It seems that error is aborting the whole execution process so "Child Table UD_<connector child table name>_US row Inserted" task does not run, even though previous tasks are finished with the status=Completed. Consequently, the entry is not created on child table.
Please, any guess or help would be very helpful. In case nothing works, I guess I will have to create and customize a "Update child Form" task as an workaround which would be called after "Create User" task.
Regards,
Hugo
My environment:
- Windows 2003, WebLogic 10.3.0.0, OIM 9.1.0.2 BL4, Oracle 10g, Java 1.6, DB App Table Connector 9.1.0.2 (from October 2009)
- Target Resource: Parent and Child Table (Oracle 10g - the same OIM DB)

An update:
I solved that error about "ORA-00936: missing expression" applying OIM 9.1.0.2 BP05. That was not impacting my issue regarding direct provisioning with auto save form and child form.
So please if anyone can confirm:
- Can I set up prepopulate adapters on child forms AND also use "auto save form" on GTC DB App Table connector?
If not, any suggestion?
Regards
Hugo

CS6 Auto-Save: 1 step forward, 1 step back

I have done a little testing with the auto-save, and there is some progress with CS6 - especially in the area where earlier versions would stop playback or scrubbing to fire off an auto-save.
It looks like the auto-save does not stop playback or scrubbing on the timeline anymore. It will stop you from other operations such as moving an audio slider or other non-critical mouse clicks. I tested with 1 minute intervals, and it appears that it won't auto-save during playback or scrubbing in the background, and will wait until the next interval after playback has stopped until it saves. (Instead of taking the very next possible moment after playback has stopped to makeup for the save) This seems like it could create the possibility that if you are playing back or scrubbing during multiple interval moments, you could have a long period where there are no auto-saves - especially if you set the interval to a high number. Like I said, I only tested with a 1 minute interval, so maybe this functions differently if you save every 10 or 20 minutes. Maybe then it will do an auto-save right after playback has stopped if it has been awhile.
The step back is that if you hide PPro, (I'm on a Mac, btw) instead of just bouncing the dock icon during an auto-save like previous versions, it will actually bring PPro to the front and block out/cancel anything else you are doing on your machine. How annoying! I can't figure out the reason to have it function like this. If it is simply hidden behind other windows, it does not do this, instead only brings to the front the small auto-save progress bar - It only happens if you hide the appplication. For example, if you are moving back and forth between PPro and AE, you could be working away on a comp in AE and suddenly PPro jumps to the foreground to let you know it did an auto-save. Since I have 2 monitors, I like to hide apps that I'm not working in to hide pallettes and other windows so I can have my desktop back. Seems like the solution for now is to not hide PPro ever and to do a proper save more often to avoid the issue of potential long periods of no auto-saves. (And submit a bug report?)
Anyways, long post for a potential trivial thing, but for those who care about this, it is a change. Anyone else experiencing this?

Jim,
Exactly, and that is what the "1 step forward" is with CS6. It drove me crazy when Auto-Save would interrupt playback. I was suggesting that it would be a better option that if you are playing back during an auto-save interval, it should take the very next opportunity to fire off a save, like maybe after hitting stop when there is a moment of downtime. However - in my testing - it looks like it skips that interval completely and waits for the next one. So, if you have it set to save every 10 minutes, but are playing back your timeline during each of those 10 minute intervals, it will never auto-save even if there are large stretches of time in between when you are doing nothing. It seems like it could be more intellegent about when it saves, and do it quieter in the background.

Auto save is not working

There is some problem after upgrade to Lion, Auto save version is not working in Iwork and anyone can fix it please advised. T.T

I have experienced projects not being auto save back-uped, and linked that to file structure problems (like I moved the project from the folder where it originally was created, or I changed the folders name where the Pr project was residing after starting it. I think that these things can lead the Auto-Save to get confused sometimes. This can also happen in Ae as well.
I have gotten used to making a duplicate of the project every day or at junctures of major change in the finder. The Mac finder duplicates the project file with the added word "copy" so I know that it isn't the original project file. I then add the date and time to the end of the file name _yymmdd_hh and send a copy to another drive.
It's too bad that there is no option in Pr to have it save the Auto-Saves to different drive than where the original is.
I also use a droplet created with a Mac renaming utility called "Name Mangler". Here is the macro for the advanced area of the re-namer in case anyone is interested.
[concatenate
<name>,
"_", [modified "%y%m%d_%H"],".", <extension>
I just drop the project file onto the droplet and it gets appended with its modification date.

How to Auto Save in iteractive forms

Hi All,
I am working on an interactive forms development in SAP.
The requirement is to have a auto save functionality as in MS office documents.
Also can we have book marks for the documents.
Your help is much appreciated.
Regards,
Sai

Hi All,
I am working on an interactive forms development in SAP.
The requirement is to have a auto save functionality as in MS office documents.
Also can we have book marks for the documents.
Your help is much appreciated.
Regards,
Sai

Auto SAVE to excel

Similar Messages

Maybe you are looking for