Auto submit input text doesnt show message after enter

I have a page in jdeveloper 11 an input text with the attribute autosubmmit=true...
When I write error entrance in the inputtext and press enter, the message is shown and the alert is given. but if I press enter again, the alert message disappears.
What can I do For this message not to disappear?
islam.

Thanks for your reply. I don't know why there is another topic from me, but it is already solved
Input text components become blank after Submit button clicked

Similar Messages

Showing message after catching Exception

Hi,
I'm having some troubles while trying to show a message after catching an Exception, the thing I want to do, is after they enter the values (Integer values in this case) if they didn't entered integer values shows a message that they input the wrong thing and then clear the fields.
Here's the code:
private void EnviarActionPerformed(java.awt.event.ActionEvent evt) throws Exception {
        int dir=0, ranuras=0, mp=0, conjunto=0;
        String algoritmo=null;
        try {
            dir = Integer.parseInt(fieldDireccion.getText());
            ranuras = Integer.parseInt(fieldRanura.getText());
            mp = Integer.parseInt(fieldMP.getText());
            conjunto = Integer.parseInt(fieldConjunto.getText());
            algoritmo = (String)(algoritmos.getSelectedItem());
        } catch (Exception e) {
            JOptionPane.showmessageDialog(null,"Wrong values");
        }The error I have is: unreported exception java.lang.Exception; must be caught or declared to be thrown.
Thanks in advance

Ok well now I have another problem =S since that actionPerformed is made by netbeans itself I cant put it inside a "try".That is incorrect. You could create another method, which does all the work. Then in the original method do nothing but the try/catch and call that other method.
But it doesn't matter because logically the code is still incorrect. Which hints by me an others have suggested.
The method should not have a throws clause. That is the problem. If the code in the catch block can throw an exception then the solution to that is to put a try catch block around that code (inside the original catch.)

ADF Input Text not showing

Hi All,
Can anyone help me out. I am using Jdev 10.1.3.3 and when I dragged the componet from Data Control as Input ADF W/ label and run the page the input text doesn't appear only the lable.
Thanks in advance

Maybe the component is set to read only in your page? If not , make sure the view object on which this component is based is updatable (or at least this particular attribute).
At least in 11g an input text will be just output text in case the VO is not updateable.

Is there a way to turn on auto complete for text that has to be entered repeatedly? I don't want to use a pop up list.

Is there a way to turn on auto complete for text that is repeated? I don't want to use a pop up list.

No, not in Number for iOS.

"Connection failed" message after entering Desktop and Screensavers pref

Whenever I open System Preferences and click the Desktop and Screensavers preference pane, a message window pops up saying, "Connection failed. There was an error connecting to the server "iMacWife". Check the server name or IP address, and then try again."
I think my iMac is trying to connect to my wife's iMac, which used to contain all of the family photos. These photos now reside on my iMac. But I can't get rid of this message. I tried tossing the Desktop and Screensavers preferences, but it didn't work. I tried making a backup of the prefs folder and then deleting all the prefs inside the folder, and that actually worked. No error message. But when I copied back the prefs, making sure to NOT replace any of the newly created prefs (for finder, D&S, By Host), the connection failed message reappeared. So there's some other pref related to the Desktop and Screensavers pref pane that is looking for something on the wife's iMac and not finding it.
And ideas what this may be?
Thanks!

I see this has not been answered yet. I have the same issue after getting rid of an old server--nothing should be connecting to it anymore, but I'm getting the same message when entering system preferences..Desktop and Screensavers. The only way to get rid of this message (until the next time) is to force quit system preferences.
Does ANYone have any idea how to fix this?
Thanks

While generating PDF from webpage or website some of the images/texts doesnt show up in PDF. Also, there are a lot of formatting inconsistencies.

Creating, Editing & Exporting PDFs ! ! !

Can anyone please help, the websites hosted with us are developed on adobe CQ5.4 content management tool and when they are exported to PDF some of the images / texts doesn't get generated in the PDF. Also, the css /theme doesn't get generated resulting in formatting inconsistencies.
However, if the same website is generated using some online PDF converters all Images & texts are coming fine with correct formatting.
Is this issue due to using CQ CMS as that has a lot of components or is there a limitation with Acrobat XI pro trial version or anything else ?
Appreciate if some one could provide inputs.
Thanks
Anusha

Text doesnt show up when typing

Hi,
I type the text i can see the underlining progression but never the text itself.
This issue happened last time and did a reset of prefs but this time it doesnt fix the issue.
Please help it is real emergency.
Thak you

Here is a link that explains how to delete the prefs the manual way.
http://forums.adobe.com/thread/375776?tstart=0
Also did you update whatever version of photoshop? What about updates of the card drivers from the ATI or Nvidia site?

Startup manager doesnt show up after installing windows partition

I partitioned my imac and installed Windows.
After installation of Windows, It no more operates the options key. My computer starts automatically with Windows, and have no choice to switch between operating systems. it is impossible that i have formatted all disc since I am sure that I partitioned 700 gb of space for OSX, and 299 gb for Windows.
Why is this happening?

Hi lindaa_07,
The Startup Manager should show up when depressing the Option key on your keyboard no matter what operating system(s) is installed. One possibility comes to mind - is this an Apple keyboard and is it directly connected to the iMac? Some other keyboards may not function in a way that brings up the startup manager. See this article for reference -
Mac doesn't start up from disc - Apple Support
You may also wish to reset your iMac's NVRAM. See how to do this from this article -
How to Reset NVRAM on your Mac - Apple Support
Specifically -
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R.
Turn on your Mac.
Press and hold the Command-Option-P-R keys immediately after you hear the startup sound.
Hold these keys until the computer restarts and you hear the startup sound for a second time.
Release the keys.
After resetting NVRAM, you may need to reconfigure settings for speaker volume, screen resolution, startup disk selection, and time zone information.
Thanks for using Apple Support Communities.
Sincerely,
Brett L

Can't input text, send in message window

When creating an outgoing email in Mail (both new and replies), I can only type about 5 characters in the main message area before I get a "clonk" system error sound. At the same time, I cannot enter anything in the Subject field. The system is not frozen, as I can still input addresses. But when I click Send, I get the same system error sound.
I have two accounts set up on my iMac. Both accounts have .Mac email accounts using OS X Mail, but I only have this problem with one account on this computer (i.e., I can send email fine from the second account.)
Any help will be appreciated.
iMac (Flat Panel) Mac OS X (10.4.8) iMac (Bondi Blue Rev. A)

This problem in Mail is usually caused by some Launch Services cache or preferences corruption. The following article describes how to manually reset Launch Services -- the notes at the bottom of the article also provide information about the side effects of deleting each of the files involved:
Resetting Launch Services
If you prefer using a cache cleaning utility instead of following the manual procedure described in the previous article, this other article provides links to some utilities that can be used for troubleshooting and cache cleaning:
Resolving Disk, Permission, and Cache Corruption
It seems that the most appropriate utility for solving this particular problem is Tiger Cache Cleaner, but you may also want to consider other utilities, such as OnyX, or Cache Out X, which are free. Whatever utility you choose, be sure to read this first:
Side effects of System cache cleaning
As an example, this is how you should proceed with OnyX:
1. Quit all applications.
2. Launch OnyX and enter your administrator password.
3. Click Maintenance. In the Reset section, check LaunchServices database.
4. You may uncheck any other pre-checked options if you wish.
5. Click the Execute button.
6. Restart the computer.

C6380 error message after entering password for router

I have a C6380 printer and a Cisco router model WRT54G. The router works fine with my laptop & my desktop. When I do the istall from the printer it finds the name of my router but when I enter the password it said it was invalid. I even changed the password on the router after the error message so I know it is correct.

Curious -- what device did you add?
By chance, are you using static IP addresses on your network?
Let's try an experiment:
1) Turn off the wireless-router. BTW -- what model do you have?
2) Turn off all network devices and computers connected to your network except the printer.
3) Turn on the wireless-router. Does the printer get a good IP address? if so, then turn on the other computers and network devices.
Regards / Jim B / Wireless Enthusiasts
( While I'm an embedded wireless systems engineer at work, on this forum I do not represent my former employer, Hewlett-Packard, or my current employer, Microsoft )
+ Click the White Kudos star on the left as a way to say "thank you" for helpful posts.

Employee last name is showing first,after entering EmailID

We've inserted emailid of some employees for sending copy of the e-orders(PO).After these,the 'Person' value for the user automatically changed it's format to - Last Name,Title,First name.Also the 'Performed by' value in Tools>View Action History is also showing in the changed format.
Before inserting email,the value was shown like only First name,Last Name.
Any update & help?

one example :
format before - PARTHAPRATIM CHAKRABARTI
format NOW - CHAKRABARTI, Mr. PARTHAPRATIM
SHUBHENDU

HT5622 trying to create an apple id and I keep getting a message after entering all information that I cant get an apple id at this time. why is that?

I am trying to set up a child I babysit's ipod touch! We are trying to create an apple id account for her to be able to download games. I entered my credit card information and everything but when we click done we get a message saying " you are not eligible to create an apple id at this time!"

Did the birthdate you entered result i an age of at least 13 years?

Bpel process to take input and show message

Hii All,
I want to desgin a BPEL process whic will take three input variable and show message "Your ticket is booked".
Can anyone plz help me how to design it?
Thanks and regards,
Deekay.

Hi,
You have to modify the xsd of your project.
For example, for your project BPELProcess1.jpr, modify the file BPELProcess1.xsd :
<schema attributeFormDefault="unqualified"
     elementFormDefault="qualified"
     targetNamespace="http://xmlns.oracle.com/BPELProcess1"
     xmlns="http://www.w3.org/2001/XMLSchema">
     <element name="BPELProcess1ProcessRequest">
          <complexType>
               <sequence>
                    <element name="input1" type="string"/>
                    <element name="input2" type="string"/>
                    <element name="input3" type="string"/>
               </sequence>
          </complexType>
     </element>
     <element name="BPELProcess1ProcessResponse">
          <complexType>
               <sequence>
                    <element name="result" type="string"/>
               </sequence>
          </complexType>
     </element>
</schema>
Where do you want to show the message"Your ticket is booked" ?
Romain.

How can I show message from server?

Has anyone idea, how can I show message from server? I want to show message after some files are uploaded via FTP.

Hi,
You can use OPEN DATASET for this purpose.
Try this code:
<b>****************************************</b>
Data:
A_FILE TYPE RLGRAP-FILENAME,   "Application server
P_FILE TYPE RLGRAP-FILENAME.   "Presentation server
DATA: BEGIN OF ITAB OCCURS 0,
LINE TYPE STRING,
END OF ITAB.
DATA: FILENAME TYPE STRING.
FILENAME = P_FILE.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
    FILENAME                = FILENAME
TABLES
    DATA_TAB                = ITAB[]
EXCEPTIONS
    FILE_OPEN_ERROR         = 1
    FILE_READ_ERROR         = 2
    NO_BATCH                = 3
    GUI_REFUSE_FILETRANSFER = 4
    INVALID_TYPE            = 5
    NO_AUTHORITY            = 6
    UNKNOWN_ERROR           = 7
    BAD_DATA_FORMAT         = 8
    HEADER_NOT_ALLOWED      = 9
    SEPARATOR_NOT_ALLOWED   = 10
    HEADER_TOO_LONG         = 11
    UNKNOWN_DP_ERROR        = 12
    ACCESS_DENIED           = 13
    DP_OUT_OF_MEMORY        = 14
    DISK_FULL               = 15
    DP_TIMEOUT              = 16
    OTHERS                  = 17.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
          WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
OPEN DATASET A_FILE FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
LOOP AT ITAB.
TRANSFER ITAB-LINE TO A_FILE.
ENDLOOP.
<b>*****************************************</b>
Hope this helps,
Regards,
Pragya

Getting a value of an input text component in backing bean

I have created an input text component on a page where I will be entering a number, setting Autosubmit feature as true. ValueChangeListener property is set as #{test.displayTable} where displayTable is a method defined in test managed bean.
Now I know to fetch the value entered in input text component by creating a RichInputText variable in Advanced property.
But in case the Advanced property is blank, then how will I be able to retrieve the value of it? This is the code. I am not able to get the value entered in the component. I can't even find any getvalue method for it.
FacesContext facesContext = FacesContext.getCurrentInstance();
UIViewRoot root = facesContext.getViewRoot();
RichInputText inputText = (RichInputText) root.findComponent("it1"); // it1 is the id of the input text component
System.out.println("inputText: "+inputText);On using sop statement, this is the output which is getting generated, while I had entered 90.
inputText: RichInputText[UIXEditableFacesBeanImpl, id=it1]

One more thing. Once the VO is getting refreshed, I am able to display an inline message saying that 'Table refreshed Successfully!' (refer the code)
But in case if the user doesn't enter anything, and press TAB button, I want to display an error message exactly besides the input text component, saying that 'Please Enter an Integer.' According to my understanding, if the user enters a null value then while casting string to Integer, it will throw an exception, so I will be writing the code in the catch part. Any suggestions?
public void displayTable(ValueChangeEvent valueChangeEvent) {
        BindingContext bctx = BindingContext.getCurrent();
        BindingContainer bindings = bctx.getCurrentBindingsEntry();
        OperationBinding method = (OperationBinding)bindings.get("displayEmployeeTable");
        try {
            Integer getValue = Integer.valueOf(valueChangeEvent.getNewValue().toString());
            System.out.println("getValue: " + getValue);
            method.getParamsMap().put("deptId", getValue);
        } catch (Exception e) {
        method.execute();
        FacesMessage message = new FacesMessage("Table refreshed Successfully!");
        message.setSeverity(FacesMessage.SEVERITY_INFO);
        FacesContext fc = FacesContext.getCurrentInstance();
        fc.addMessage(null, message);
    }Edited by: Sonull on Jan 12, 2013 3:56 PM

Auto submit input text doesnt show message after enter

Similar Messages

Maybe you are looking for