Configuring logging for OraBPEL~OC4J_BPEL~default_island~1 log?

Hi, was wondering if anybody can tell me anything about configuring the logging that gets
written to the file OraBPEL~OC4J_BPEL~default_island~1 in $ORACLE_HOME/opmn/logs? Right now the file is rapidly growing very large and we'd like to limit the log output that
gets written here if possible.
I see log4 config files for most of the other logs in the BPEL system, but I can't find anything
that seems to allow me any control over this. Any help is greatly appreciated.
Phil

Hi Phil,
This is a opmn/oc4j log and has nothing to do with BPEL that's why you didn't find anything about it. It's logging configuration is done via opmn.xml which is located in $ORACLE_HOME/opmn/conf. You can find documentation about it in the OPMN guide.
All the OC4J's std out and err are written there. If it is growing too fast maybe you have some BPEL loggers on DEBUG? I think the system wide loggers which you configure thru the BPELAdmin application write their output to that file.
hth,
~ronen

Similar Messages

  • RMI Exception in OraBPEL~OC4J_BPEL~default_island~1 log file

    Hi,
    I am facing following rmi exception in my OraBPEL~OC4J_BPEL~default_island~1 log file:
    09/04/09 19:16:50 java.lang.NullPointerException
    09/04/09 19:16:50      at com.evermind.server.rmi.RMIServer.run(RMIServer.java:464)
    09/04/09 19:16:50      at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
    This exception is restricting me to call BPEL Service from java.
    I ckecked all rmi configuration but dont find exact place where the wrong configuration is.
    Your help is really appreciated,
    Rupesh.
    Edited by: user10994198 on Apr 9, 2009 7:04 AM

    Hi Rupesh,
    Please follow this link : http://orasoa.blogspot.com/2007/06/calling-bpelesb-webservice-from.html, and see this configuration will help you overcome NPE.
    Hope this helps!
    Cheers
    Anirudh Pucha

  • Configure Log File for each web application deployed in weblogic server usi

    Hi All,
    How do I configure Log4J to log separately for each web application? i.e. Assuming, I have a web application "AWeb" and a web application "BWeb". I need a log file to be created for AWeb Separately and BWeb Separately. i.e. All the log information for "AWeb" web application will be stored in AWeb.log and all the "BWeb" web application will be stored in BWeb.log
    Do you have any sample code and configuration details for the above-mentioned requirement?
    Thanks in Advance,
    C R Baradwaj

    You do not need to do anything strange, just use log4j the usual way with the exception that you do not need to init log4j (this is not necesary when using a log4j.xml.)
    A minimal sample of a log4j.xml is
    <?xml version="1.0" encoding="UTF-8" ?>
    <!DOCTYPE log4j:configuration SYSTEM "log4j.dtd">
    <log4j:configuration xmlns:log4j="http://jakarta.apache.org/log4j/">
    <appender name="ConsoleAppender" class="org.apache.log4j.ConsoleAppender">
    <layout class="org.apache.log4j.SimpleLayout"/>
    </appender>
    <root>
    <priority value ="debug" />
    <appender-ref ref="ConsoleAppender"/>
    </root>
    </log4j:configuration>
    You just have to be sure that you have different log4j.xml in your classpath for different web applications.
    Regards,
    LG

  • Managing and configuring log files for Oracle 9ias

    Hi all,
    I'm wondering where I can find documentation on managing and configuring log files like:
    ORACLE_HOME/admin/ sid/*dump/* ORACLE_HOME/assistants/opca/install.log ORACLE_HOME/webcache/logs/*
    ORACLE_HOME/dcm/logs/*
    ORACLE_HOME/ldap/log/*
    ORACLE_HOME/opmn/logs/*
    ORACLE_HOME/sysman/log/*
    ORACLE_HOME/j2ee/ OC4J_instance/log/*/* ORACLE_HOME/config/schemaload.log ORACLE_HOME/config/useinfratool.log
    because I didn't find anything in document like:
    Oracle9 i Application Server
    Administrator�s Guide
    Release 2 (9.0.2)
    May 2002
    Part No. A92171-02
    So, if anyone has any idea...
    Thanks in advance

    Does anyone know how or if it is possible to send the stdout and/or stderr to the log4j type of logging? I already capture the stdout and stderr to the flat file. But I would like to timestamp every line to compare and diagnose problems with each application that encounters problems. Each web app is using log4j to their own application log4j log file. When they encounter errors or resource draining problems, I would like to see the container logs and see what was occuring inside the container at around that same time.
    Any ideas?

  • Configuring log 4j with oracle9i database for JavaStored procedure

    Hi,
    How to configure log4j for java stored procedure.database is running on diffrent servers .
    when use load java utiltiy to load the java & jar files by default it will store in which folder
    can any one help me in this
    Thanks in advance

    user468979,
    Here are the results of my Internet search. Maybe you will find something helpful:
    http://tinyurl.com/a2wst
    Good Luck,
    Avi.

  • Configure Logging VI start and stop without losing or dropping data

    Hi there,
    I am currently using a M-series PCI-6280 and a counter card PCI-6601 to do measurements on Labview 2010. 
    I have 3 tasks set up, 2 linear encoder counter tasks on the 6601 and 1 analog input task with 4 x inputs on my 6280.  These are all timed with a counter on the 6601 through an RTSI line.
    On all of these tasks, I have a similar set-up as the picture in http://zone.ni.com/devzone/cda/tut/p/id/9574 except they are all set up as "Log" only and "create/replace" file for the configure logging.vi.  
    Since I want to have the encoders continuously locate my position, I never "stop" the counter tasks.  However, I need to use the data acquired after every move along the path to obtain and process the location and the subsequent analog input data points I have.  What I have done, is I would "stop.vi" my sample clock on the counter, then open the tdms file, read the tdms file, get the array from there, close the tdms file, then "run.vi" the sample clock on the counter.  However, I found when I stop the sample clock, not ALL the data points have been streamed into the file.  
    For example, say I move my carriage to 100mm to the right while logging, then stop the sample clock, obtain the array from the tdms file, find the size of this array called "X" for future use.  Then, I move the carraige back to the origin WITHOUT starting the clock again.  THEN I start the sample clock again and move 100mm towards the left.  After this is done, I again, stop the sample clock and obtain the data from my tdms file starting the offset of read at "X+1".  I EXPECT that this array SHOULD start at 0 then move on to 100mm to the left.  However, what it does, is I see the data start at 100mm from the right for a few data points, then JUMPS to 0, then moves to the left as expected.
    I propose that this means that when I stop the sample clock, the data from the counters (buffer?) have not all been streamed to the tdms file yet, and when I start the clock again, the remaining gets dumped it.  Here, I am confused since I thought that "configure logging.vi" streams directly into the file without a buffer.
     I was wondering if I am doing anything wrong, expecting the wrong things, and if there is a way to implement what I want.  As in, is there a way to flush the remaning data in the "buffer" (i tried the flush tdms vi, but that didn't work and I didn't think it was relevant) after I stop the clock or something like that, or is my implementation competely off. 
    Thanks for reading,
    Lester
    PS.  Having a way to read the most recent point from the counters would be awesome too.  However, everytime I set the offset/relative to most current, it says that I cant do that while logging, even though I saw a community post saying that it works with analog inputs.  Maybe this is off topic, but yeah, currently I'm just trying to get the arrays from tdms working, THANKS!
    Solved!
    Go to Solution.

    Hello, Lester!
    There are a few solutions for you here.
    First, since you don't need the excess data points, you can set the "DAQmx Read" Property Node to "Overwrite" any data from previous acquisitions. 
    To do this, first select a "DAQmx Read Property Node" from the functions palette. The first property should default to "RelativeTo." Click on this, and instead select "OverWrite Mode" (see attached). Next, right-click on the input, create constant, and select "Overwrite Unread Samples" from the drop-down enum. After wiring the other inputs and outputs on the node, This should accomplish what you're looking for. If for some reason it doesn't, consider the following options.
    Your second option is to limit the buffer size. If you know how long you want to acquire data for, you can use the sampling rate (it looks like 5000Hz, in your case) to determine the number of samples to acquire. Simply use the "DAQmx Buffer Property Node" and input the number of samples desired. When the required number of samples is acquired, the buffer will begin to overwrite the old samples. This, of course, is not a very flexible method, and obviously requires a pre-set number of data points.
    Your final option is to do a brute-force open and close of your task with each acquisition. Simply use the "Clear Task" and "Create Task" functions with every new set of data desire. This should clear the buffer, but will be fairly slow (especially if you eventually change your program to take many sets of data very quickly). 
    As mentioned, the "OverWrite" property in the "DAQmx Read" node should take care of this for you, but feel free to try the other options if they better suit your needs.
    Let us know if you have any further questions!
    Best,
    Will H | Applications Engineer | National Instruments
    Will Hilzinger | Switch Product Support Engineer | National Instruments

  • How to find out logs related to which server, If i have 2 WFE's in the farm. How to configure logs path?

    Hi,
    I got this doubt, when searching logs on the servers. I have 2 WFE's in my farm, I got an error from enduser. So in which WFE server i need to check the logs.
    How to configure logs path. Is it is possible to specify logs path on our own instead of 14 hive folder.
    Badri

    That is a really bad idea, especially with idle disconnects and other unreliability of CIFS.
    You should instead check out the command
    Merge-SPLogFiles which will allow you to combine ULS logs from multiple servers into a single file.
    You can certainly specify your own path, but the path must be available on all servers. For example, if you specified D:\Logs, D:\Logs must exist on all SharePoint servers within the farm.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • I write digital port by 'DAQmx Configure Logging.vi​' and receive TDMS file with 8 boolean channels. How can I write to 1 integer channel?

    Hello!
    I want to write 1 digital port from PXI-6536 with streaming to TDMS file.
    I'm writing by 'DAQmx Configure Logging.vi' and become TDMS file with 8 boolean channels.
    How can I write to 1integer channel?
    Attachments:
    1.JPG ‏27 KB

    Hey Atrina,
    The actual data stored on disk is just the raw data (that is, a byte per sample in your case).  It's really just a matter of how that data is being represented in LabVIEW whenever you read back the TDMS file.
    I'm not sure if there is a better way to do this, but here is a way to accomplish what you're wanting:
    Read back the TDMS file as a digital waveform.  Then there's a conversion function in LabVIEW called DWDT Digital to Binary.  This function will convert that set of digital channels into the "port format" that you're wanting.  I've attached an example of what I mean.
    Note: When looking at this VI, there are a few things that the downgrade process did to the VI that I would not recommend for these TDMS files.  It added a 1.0 constant on the TDMS Open function, and it set "disable buffering" on the TDMS Open function to false; you can get rid of both of those constants.
    Message Edited by AndrewMc on 01-27-2010 11:21 AM
    Thanks,
    Andy McRorie
    NI R&D
    Attachments:
    digitalconvert.vi ‏13 KB

  • Daqmx Configure Logging with Time Stamp

     Hi All,
    I was wondering if it is possible to use Daqmx Configure Logging to log both data, and a row of the exact time (not a relative one), or at least add the FIRST time and date to the information?
    Thanks,
    Lester

    Hi,
    I got it to work, I just forgot to put in the "Group Name" and "Channel Name" which is necessary to get the properties, I wasn't aware of that.  The info can be seen at http://zone.ni.com/devzone/cda/tut/p/id/3539 . 
    I got the time stamp now, but the resolution is only to seconds.  I tried using the "Format Date/Time String" vi to format the resolution to milliseconds, but that doesn't seem to work because all the decimals after the seconds is just ".000000".  Does TDMS always start at .000 seconds, or does it just not go down to that resolution of timing?
    Thanks for your help,
    Lester

  • DAQmx configure logging (TDMS) and counter

    Hi,
    I'm trying to stream analog data jointly with counter data to one TDMS file with use of DAQmx configure logging vi. This is quite new but powerful function but I can't manage with it successfully. I'm able to acquire analog data only and display no. of counts simultaneously (attached diagram). I have no idea how attach counter data to TDMS stream as separate channel group.
    It is important for me to stream data with this VI bacause I'm sampling analog data with 95kHz per channel (PCI-6143 board).
     Could you post any ideas how to resolve this problem?
    Best regards
    Mark
    Attachments:
    acq_analog_and_contr.PNG ‏44 KB

    Eric, hear is short info about DAQmx configure logging http://zone.ni.com/devzone/cda/tut/p/id/9574.
    Yes I thought about producer/consumer structure, It is first alternative way.
    There is also another very simple way -  connecting encoder to analog input and acquire together with analog signals. Of course It will be neccasary to process sigal from encoder after recording. I'm also concerning such solution
    Ok I have to sleep with this problem  
    Best regards
    Mark

  • WebGate: Could not configure log engine (Linux)

    After installing the WebGate on Linux AS 3 with Apache 2.x I am getting the error message in apache error.log:
    WebGate: Could not configure log engine
    whenever I am trying to access http://localhost
    Could anyone offer some suggestion on how to fix it?
    Thanks Kris

    Thanks for the response. I was using the default version of oblog_config_wg.xml initially. Below is the current one I am using.
    I end up with the error in my apache error log every time I navigate to the server from a web browser. The sections I changed are below in bold. Thanks for any insight you can provide.
    &lt;CompoundList
    xmlns="http://www.oblix.com"ListName="logframework.xml.staging"&gt;
    &lt;SimpleList&gt;
    &lt;NameValPair
    ParamName="LOG_THRESHOLD_LEVEL"Value="LOGLEVEL_WARNING"&gt;
    &lt;/NameValPair&gt;
    &lt;NameValPair
    ParamName="AUTOSYNC"Value="True"&gt;&lt;/NameValPair&gt;
    &lt;/SimpleList&gt;
    &lt;CompoundList
    xmlns="http://www.oblix.com"
    ListName="LOG_CONFIG"&gt;
    &lt;!-- Write all FATAL logs to the system logger. --&gt;
    &lt;ValNameList
    xmlns="http://www.oblix.com"
    ListName="LogFatal2Sys"&gt;
    &lt;NameValPair
    ParamName="LOG_LEVEL"
    Value="LOGLEVEL_FATAL"&gt;
    &lt;/NameValPair&gt;
    &lt;NameValPair
    ParamName="LOG_WRITER"
    Value="SysLogWriter"&gt;
    &lt;/NameValPair&gt;
    &lt;NameValPair
    ParamName="LOG_STATUS"
    Value="On"&gt;
    &lt;/NameValPair&gt;
    &lt;/ValNameList&gt;
    &lt;!-- Write all logs to the Oracle log file. --&gt;
    &lt;ValNameList
    xmlns="http://www.oblix.com"
    ListName="LogAll2File"&gt;
    &lt;NameValPair
    ParamName="LOG_LEVEL"
    Value="LOGLEVEL_ALL"&gt;
    &lt;/NameValPair&gt;
    &lt;NameValPair
    ParamName="LOG_WRITER"
    Value="*FileLogWriter*"&gt;
    &lt;/NameValPair&gt;
    &lt;NameValPair
    ParamName="FILE_NAME"
    Value="*/usr/local/apache2/logs/webgate.log*"&gt;
    &lt;/NameValPair&gt;
    &lt;!-- Buffer up to 64 KB (expressed in bytes) of log entries before flushing to the file. --&gt;
    &lt;NameValPair
    ParamName="BUFFER_SIZE"
    Value="131072"&gt;
    &lt;/NameValPair&gt;
    &lt;!-- Rotate the log file once it exceeds 50 MB (expressed in bytes). --&gt;
    &lt;NameValPair
    ParamName="MAX_ROTATION_SIZE"
    Value="52428800"&gt;
    &lt;/NameValPair&gt;
    &lt;!-- Rotate the log file after 24 hours (expressed in seconds). --&gt;
    &lt;NameValPair
    ParamName="MAX_ROTATION_TIME"
    Value="86400"&gt;
    &lt;/NameValPair&gt;
    &lt;NameValPair
    ParamName="LOG_STATUS"
    Value="On"&gt;
    &lt;/NameValPair&gt;
    &lt;/ValNameList&gt;
    &lt;/CompoundList&gt;
    &lt;/CompoundList&gt;

  • Configure log file transfer to downstream capture daabase!

    Dear all,
    I am setting up bidirectional replication among 2 database server that are Linux based and oracle 11gR1 is the database.
    I am following the document Oracle Streams Administrator Guide, Have completed all the pre-configuration tasks but I have confusion with this step where we have to configure log file transfer to downstream capture database.
    I am unable to understand this from the documentation.
    I mean how do I configure Oracle Net so that the source database can communicate with each other in bi-directional replication?
    Configure authentication at both databases to support the transfer of redo data? How can I do this?
    Third thing is the paramter setting that obviously i can do
    Kindly help me through this step.
    Regards, Imran

    and what about this:
    Configure authentication at both databases to support the transfer of redo data?
    Thanks, ImranFor communication between the two databases, you create streams administrator at both the databases. The strmadmin talk to each other.
    Regards,
    S.K.

  • Linear Encoder and Configure Logging

    Hi All,
    I am currently using a PCI-6280 M-series board with LV2010.
    I have a Linear Encoder in X4 mode connected to Counter 0 and I was wondering if it is possible to stream the values on the counter as it keeps track of the distance into a TDMS file using "DAQmx Configure Logging" .  I tried this using MAX to configure this, but it does not seem to work, so I'm just wondering if this is even possible as I couldn't seem to find anything online about doing this.
    Thanks,
    Lester
    Solved!
    Go to Solution.

    Hi Lester,
    My apologies, I tried it out on a different board. It can work with yours, too, though. There is an example of a buffered counter task that should allow you to log the data by adding in the Configure Logging VI like we did before.
    Open LabVIEW and go to Help >> Find Examples... it will open the Example Finder. In the Example Finder, expand the folders to get to Hardware Input and Output >> DAQmx >> Counter Measurements >> Count Digital Events >> Count Digital Events-Buffered-Countinuous-Ext Clk.vi
    Put the correct counter channel and PFI channel in the controls, and run the VI to see what it does. Then you can modify the block diagram to add the Configure Logging VI (the same way as before) and run the VI again. You will end up with a TDMS log saved at the path you wire into the Configure Logging VI.
    I hope that helps.
    Regards,
    Daniel H.
    Customer Education Product Support Engineer
    National Instruments
    Certified LabVIEW Developer

  • Error trying to configure ADS for printing from BW reports

    hi all,
    i am trying to configure ADS for printing off reports from the BW portal. I am using BI 7.0 (BW Portal version 7.0 SP10) and am getting the following error i nthe default trace file.
    #1.5#00187177BCAA008D000000DD0000144C00043EE522456586#1195053750220#com.sap.ip.bi.base.exception.BIBaseRuntimeException#sap.com/com.sap.prt.application.rfcframework#com.sap.ip.bi.base.exception.BIBaseRuntimeException#PASS.TEST#1678##BWD#PASS.TEST                       #B373727691C24C2FADD8534371BB536E#SAPEngine_Application_Thread[impl:3]_28##0#0#Fatal#1#/Applications/BI#Plain###Exception thrown: com.sap.ip.bi.base.exception.BIBaseRuntimeException: Error: com.sap.ip.bi.base.exception.BIBaseRuntimeException
    com.sap.ip.bi.base.exception.BIBaseRuntimeException: Error: com.sap.ip.bi.base.exception.BIBaseRuntimeException
         at com.sap.ip.bi.portalrfc.dispatcher.services.BIServicesRfcDispatcherService.doHandleRequest(BIServicesRfcDispatcherService.java:216)
         at com.sap.ip.bi.portalrfc.services.BIRfcService.handleRequest(BIRfcService.java:247)
         at com.sapportals.portal.prt.service.rfc.RFCEngineService.handleEvent(RFCEngineService.java:341)
         at com.sapportals.portal.prt.service.rfc.PRTRFCBean.processFunction(PRTRFCBean.java:37)
         at com.sapportals.portal.prt.service.rfc.PRTRFCRemoteObjectImpl0.processFunction(PRTRFCRemoteObjectImpl0.java:118)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187)
         at $Proxy145.processFunction(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java:219)
         at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:169)
         at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequest(RFCJCOServer.java:156)
         at com.sap.mw.jco.JCO$Server.dispatchRequest(JCO.java:7785)
         at com.sap.mw.jco.MiddlewareJRfc$Server.dispatchRequest(MiddlewareJRfc.java:2405)
         at com.sap.mw.jco.MiddlewareJRfc$Server.listen(MiddlewareJRfc.java:1728)
         at com.sap.mw.jco.JCO$Server.listen(JCO.java:8145)
         at com.sap.mw.jco.JCO$Server.work(JCO.java:8265)
         at com.sap.mw.jco.JCO$Server.loop(JCO.java:8212)
         at com.sap.mw.jco.JCO$Server.run(JCO.java:8128)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Caused by: com.sap.ip.bi.base.exception.BIBaseRuntimeException: Unknown Error
         at com.sap.ip.bi.export.xfa.impl.Document.writeWidthsAsXmlToStream(Document.java:419)
         at com.sap.ip.bi.export.xfa.widthcalc.WidthCalculator.<init>(WidthCalculator.java:55)
         at com.sap.ip.bi.export.xfa.impl.SizeCalculator.calc(SizeCalculator.java:88)
         at com.sap.ip.bi.export.impl.ExportController.calculateAndSetSizes(ExportController.java:569)
         at com.sap.ip.bi.export.impl.ExportController.doExportPrep(ExportController.java:454)
         at com.sap.ip.bi.export.impl.ExportController.convert(ExportController.java:368)
         at com.sap.ip.bi.export.controller.ExportResult.createExport(ExportResult.java:58)
         at com.sap.ip.bi.webapplications.pageexport.broadcasterapi.PageExport.createExportResult(PageExport.java:157)
         at com.sap.ip.bi.webapplications.pageexport.broadcasterapi.PageExport.getPdfForPage(PageExport.java:166)
         at com.sap.ip.bi.webapplications.pageexport.broadcasterapi.PageExport.getExports(PageExport.java:183)
         at com.sap.ip.bi.broadcasting.runtime.impl.precalculation.PrecPageAssembler.processPage(PrecPageAssembler.java:271)
         at com.sap.ip.bi.broadcasting.runtime.impl.precalculation.PrecPageAssembler.run(PrecPageAssembler.java:195)
         at com.sap.ip.bi.broadcasting.runtime.impl.ProducerPrecalculation.produce(ProducerPrecalculation.java:415)
         at com.sap.ip.bi.broadcasting.runtime.RfcListenerRSRD_X_PRODUCE.handleRequest(RfcListenerRSRD_X_PRODUCE.java:130)
         at com.sap.ip.bi.portalrfc.dispatcher.services.BIServicesRfcDispatcherService.doHandleRequest(BIServicesRfcDispatcherService.java:181)
         ... 28 more
    Caused by: com.sap.tc.webdynpro.pdfobject.core.PDFObjectRuntimeException: Service call exception; nested exception is:
         java.net.SocketTimeoutException: Read timed out
         at com.sap.tc.webdynpro.pdfobject.core.PDFObject.doSoapCall(PDFObject.java:405)
         at com.sap.tc.webdynpro.pdfobject.core.PDFObject.createPDF(PDFObject.java:334)
         at com.sap.ip.bi.export.xfa.impl.Document.writeWidthsAsXmlToStream(Document.java:413)
         ... 42 more
    Caused by: java.rmi.RemoteException: Service call exception; nested exception is:
         java.net.SocketTimeoutException: Read timed out
         at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:89)
         at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:99)
         at com.sap.tc.webdynpro.pdfobject.core.PDFObject.doSoapCall(PDFObject.java:382)
         ... 44 more
    Caused by: java.net.SocketTimeoutException: Read timed out
         at java.net.SocketInputStream.socketRead0(Native Method)
         at java.net.SocketInputStream.read(SocketInputStream.java:129)
         at java.io.BufferedInputStream.fill(BufferedInputStream.java:183)
         at java.io.BufferedInputStream.read(BufferedInputStream.java:201)
         at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.readLine(HTTPSocket.java:806)
         at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.getInputStream(HTTPSocket.java:341)
         at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.getResponseCode(HTTPSocket.java:250)
         at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.HTTPTransport.getResponseCode(HTTPTransport.java:362)
         at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.outputMessage(MimeHttpBinding.java:551)
         at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.call(MimeHttpBinding.java:1425)
         at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:82)
         ... 46 more
    #1.5#00187177BCAA008D000000E00000144C00043EE522456FA1#1195053750220#com.sap.ip.bi.base.application.message.impl.MessageBase#sap.com/com.sap.prt.application.rfcframework#com.sap.ip.bi.base.application.message.impl.MessageBase#PASS.TEST#1678##BWD#PASS.TEST                       #B373727691C24C2FADD8534371BB536E#SAPEngine_Application_Thread[impl:3]_28##0#0#Error#1#/Applications/BI#Plain###A message was generated:
    ERROR
    Error: com.sap.ip.bi.base.exception.BIBaseRuntimeException
    com.sap.ip.bi.base.exception.BIBaseRuntimeException ERROR
    com.sap.ip.bi.base.exception.BIBaseRuntimeException
    Log ID: 00187177BCAA008D000000DD0000144C00043EE522456586
    Initial cause
    Message: Service call exception; nested exception is:
         java.net.SocketTimeoutException: Read timed out
    Stack trace: java.rmi.RemoteException: Service call exception; nested exception is:
         java.net.SocketTimeoutException: Read timed out
         at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:89)
         at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:99)
         at com.sap.tc.webdynpro.pdfobject.core.PDFObject.doSoapCall(PDFObject.java:382)
         at com.sap.tc.webdynpro.pdfobject.core.PDFObject.createPDF(PDFObject.java:334)
         at com.sap.ip.bi.export.xfa.impl.Document.writeWidthsAsXmlToStream(Document.java:413)
         at com.sap.ip.bi.export.xfa.widthcalc.WidthCalculator.<init>(WidthCalculator.java:55)
         at com.sap.ip.bi.export.xfa.impl.SizeCalculator.calc(SizeCalculator.java:88)
         at com.sap.ip.bi.export.impl.ExportController.calculateAndSetSizes(ExportController.java:569)
         at com.sap.ip.bi.export.impl.ExportController.doExportPrep(ExportController.java:454)
         at com.sap.ip.bi.export.impl.ExportController.convert(ExportController.java:368)
         at com.sap.ip.bi.export.controller.ExportResult.createExport(ExportResult.java:58)
         at com.sap.ip.bi.webapplications.pageexport.broadcasterapi.PageExport.createExportResult(PageExport.java:157)
         at com.sap.ip.bi.webapplications.pageexport.broadcasterapi.PageExport.getPdfForPage(PageExport.java:166)
         at com.sap.ip.bi.webapplications.pageexport.broadcasterapi.PageExport.getExports(PageExport.java:183)
         at com.sap.ip.bi.broadcasting.runtime.impl.precalculation.PrecPageAssembler.processPage(PrecPageAssembler.java:271)
         at com.sap.ip.bi.broadcasting.runtime.impl.precalculation.PrecPageAssembler.run(PrecPageAssembler.java:195)
         at com.sap.ip.bi.broadcasting.runtime.impl.ProducerPrecalculation.produce(ProducerPrecalculation.java:415)
         at com.sap.ip.bi.broadcasting.runtime.RfcListenerRSRD_X_PRODUCE.handleRequest(RfcListenerRSRD_X_PRODUCE.java:130)
         at com.sap.ip.bi.portalrfc.dispatcher.services.BIServicesRfcDispatcherService.doHandleRequest(BIServicesRfcDispatcherService.java:181)
         at com.sap.ip.bi.portalrfc.services.BIRfcService.handleRequest(BIRfcService.java:247)
         at com.sapportals.portal.prt.service.rfc.RFCEngineService.handleEvent(RFCEngineService.java:341)
         at com.sapportals.portal.prt.service.rfc.PRTRFCBean.processFunction(PRTRFCBean.java:37)
         at com.sapportals.portal.prt.service.rfc.PRTRFCRemoteObjectImpl0.processFunction(PRTRFCRemoteObjectImpl0.java:118)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187)
         at $Proxy145.processFunction(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java:219)
         at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:169)
         at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequest(RFCJCOServer.java:156)
         at com.sap.mw.jco.JCO$Server.dispatchRequest(JCO.java:7785)
         at com.sap.mw.jco.MiddlewareJRfc$Server.dispatchRequest(MiddlewareJRfc.java:2405)
         at com.sap.mw.jco.MiddlewareJRfc$Server.listen(MiddlewareJRfc.java:1728)
         at com.sap.mw.jco.JCO$Server.listen(JCO.java:8145)
         at com.sap.mw.jco.JCO$Server.work(JCO.java:8265)
         at com.sap.mw.jco.JCO$Server.loop(JCO.java:8212)
         at com.sap.mw.jco.JCO$Server.run(JCO.java:8128)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Caused by: java.net.SocketTimeoutException: Read timed out
         at java.net.SocketInputStream.socketRead0(Native Method)
         at java.net.SocketInputStream.read(SocketInputStream.java:129)
         at java.io.BufferedInputStream.fill(BufferedInputStream.java:183)
         at java.io.BufferedInputStream.read(BufferedInputStream.java:201)
         at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.readLine(HTTPSocket.java:806)
         at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.getInputStream(HTTPSocket.java:341)
         at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.getResponseCode(HTTPSocket.java:250)
         at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.HTTPTransport.getResponseCode(HTTPTransport.java:362)
         at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.outputMessage(MimeHttpBinding.java:551)
         at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.call(MimeHttpBinding.java:1425)
         at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:82)
         ... 46 more
    Message: Error: com.sap.ip.bi.base.exception.BIBaseRuntimeException
    Stack trace: com.sap.ip.bi.base.exception.BIBaseRuntimeException: Error: com.sap.ip.bi.base.exception.BIBaseRuntimeException
         at com.sap.ip.bi.portalrfc.dispatcher.services.BIServicesRfcDispatcherService.doHandleRequest(BIServicesRfcDispatcherService.java:216)
         at com.sap.ip.bi.portalrfc.services.BIRfcService.handleRequest(BIRfcService.java:247)
         at com.sapportals.portal.prt.service.rfc.RFCEngineService.handleEvent(RFCEngineService.java:341)
         at com.sapportals.portal.prt.service.rfc.PRTRFCBean.processFunction(PRTRFCBean.java:37)
         at com.sapportals.portal.prt.service.rfc.PRTRFCRemoteObjectImpl0.processFunction(PRTRFCRemoteObjectImpl0.java:118)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187)
         at $Proxy145.processFunction(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java:219)
         at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:169)
         at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequest(RFCJCOServer.java:156)
         at com.sap.mw.jco.JCO$Server.dispatchRequest(JCO.java:7785)
         at com.sap.mw.jco.MiddlewareJRfc$Server.dispatchRequest(MiddlewareJRfc.java:2405)
         at com.sap.mw.jco.MiddlewareJRfc$Server.listen(MiddlewareJRfc.java:1728)
         at com.sap.mw.jco.JCO$Server.listen(JCO.java:8145)
         at com.sap.mw.jco.JCO$Server.work(JCO.java:8265)
         at com.sap.mw.jco.JCO$Server.loop(JCO.java:8212)
         at com.sap.mw.jco.JCO$Server.run(JCO.java:8128)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Caused by: com.sap.ip.bi.base.exception.BIBaseRuntimeException: Unknown Error
         at com.sap.ip.bi.export.xfa.impl.Document.writeWidthsAsXmlToStream(Document.java:419)
         at com.sap.ip.bi.export.xfa.widthcalc.WidthCalculator.<init>(WidthCalculator.java:55)
         at com.sap.ip.bi.export.xfa.impl.SizeCalculator.calc(SizeCalculator.java:88)
         at com.sap.ip.bi.export.impl.ExportController.calculateAndSetSizes(ExportController.java:569)
         at com.sap.ip.bi.export.impl.ExportController.doExportPrep(ExportController.java:454)
         at com.sap.ip.bi.export.impl.ExportController.convert(ExportController.java:368)
         at com.sap.ip.bi.export.controller.ExportResult.createExport(ExportResult.java:58)
         at com.sap.ip.bi.webapplications.pageexport.broadcasterapi.PageExport.createExportResult(PageExport.java:157)
         at com.sap.ip.bi.webapplications.pageexport.broadcasterapi.PageExport.getPdfForPage(PageExport.java:166)
         at com.sap.ip.bi.webapplications.pageexport.broadcasterapi.PageExport.getExports(PageExport.java:183)
         at com.sap.ip.bi.broadcasting.runtime.impl.precalculation.PrecPageAssembler.processPage(PrecPageAssembler.java:271)
         at com.sap.ip.bi.broadcasting.runtime.impl.precalculation.PrecPageAssembler.run(PrecPageAssembler.java:195)
         at com.sap.ip.bi.broadcasting.runtime.impl.ProducerPrecalculation.produce(ProducerPrecalculation.java:415)
         at com.sap.ip.bi.broadcasting.runtime.RfcListenerRSRD_X_PRODUCE.handleRequest(RfcListenerRSRD_X_PRODUCE.java:130)
         at com.sap.ip.bi.portalrfc.dispatcher.services.BIServicesRfcDispatcherService.doHandleRequest(BIServicesRfcDispatcherService.java:181)
         ... 28 more
    Caused by: com.sap.tc.webdynpro.pdfobject.core.PDFObjectRuntimeException: Service call exception; nested exception is:
         java.net.SocketTimeoutException: Read timed out
         at com.sap.tc.webdynpro.pdfobject.core.PDFObject.doSoapCall(PDFObject.java:405)
         at com.sap.tc.webdynpro.pdfobject.core.PDFObject.createPDF(PDFObject.java:334)
         at com.sap.ip.bi.export.xfa.impl.Document.writeWidthsAsXmlToStream(Document.java:413)
         ... 42 more
    Caused by: java.rmi.RemoteException: Service call exception; nested exception is:
         java.net.SocketTimeoutException: Read timed out
         at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:89)
         at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:99)
         at com.sap.tc.webdynpro.pdfobject.core.PDFObject.doSoapCall(PDFObject.java:382)
         ... 44 more
    Caused by: java.net.SocketTimeoutException: Read timed out
         at java.net.SocketInputStream.socketRead0(Native Method)
         at java.net.SocketInputStream.read(SocketInputStream.java:129)
         at java.io.BufferedInputStream.fill(BufferedInputStream.java:183)
         at java.io.BufferedInputStream.read(BufferedInputStream.java:201)
         at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.readLine(HTTPSocket.java:806)
         at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.getInputStream(HTTPSocket.java:341)
         at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.getResponseCode(HTTPSocket.java:250)
         at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.HTTPTransport.getResponseCode(HTTPTransport.java:362)
         at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.outputMessage(MimeHttpBinding.java:551)
         at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.call(MimeHttpBinding.java:1425)
         at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:82)
         ... 46 more
    com.sap.ip.bi.base.exception.BIBaseRuntimeException ERROR
    com.sap.ip.bi.base.exception.BIBaseRuntimeException#
    #1.5#00187177BCAA0084000000120000144C00043EE523772516#1195053770252#com.sap.ip.bi.export.xfa.impl.PDFConverter#sap.com/irj#com.sap.ip.bi.export.xfa.impl.PDFConverter#PASS.TEST#1642##triombwd01.corp.net_BWD_9280250#PASS.TEST#45ddd21092c511dc9cbf00187177bcaa#SAPEngine_Application_Thread[impl:3]_58##0#0#Error##Plain###EXPORT XFA calcTemplate=Service call exception; nested exception is:
         java.net.SocketTimeoutException: Read timed out#
    #1.5#00187177BCAA0084000000130000144C00043EE523772FEE#1195053770252#com.sap.ip.bi.base.exception.BIBaseRuntimeException#sap.com/irj#com.sap.ip.bi.base.exception.BIBaseRuntimeException#PASS.TEST#1642##triombwd01.corp.net_BWD_9280250#PASS.TEST#45ddd21092c511dc9cbf00187177bcaa#SAPEngine_Application_Thread[impl:3]_58##0#0#Error##Plain###Exception caught: com.sap.tc.webdynpro.pdfobject.core.PDFObjectRuntimeException: Service call exception; nested exception is:
         java.net.SocketTimeoutException: Read timed out
    com.sap.tc.webdynpro.pdfobject.core.PDFObjectRuntimeException: Service call exception; nested exception is:
         java.net.SocketTimeoutException: Read timed out
         at com.sap.tc.webdynpro.pdfobject.core.PDFObject.doSoapCall(PDFObject.java:405)
         at com.sap.tc.webdynpro.pdfobject.core.PDFObject.createPDF(PDFObject.java:334)
         at com.sap.ip.bi.export.xfa.impl.Document.writeWidthsAsXmlToStream(Document.java:413)
         at com.sap.ip.bi.export.xfa.widthcalc.WidthCalculator.<init>(WidthCalculator.java:55)
         at com.sap.ip.bi.export.xfa.impl.SizeCalculator.calc(SizeCalculator.java:88)
         at com.sap.ip.bi.export.impl.ExportController.calculateAndSetSizes(ExportController.java:569)
         at com.sap.ip.bi.export.impl.ExportController.doExportPrep(ExportController.java:454)
         at com.sap.ip.bi.export.impl.ExportController.convert(ExportController.java:368)
         at com.sap.ip.bi.export.controller.ExportResult.createExport(ExportResult.java:58)
         at com.sap.ip.bi.webapplications.pageexport.PageExportRenderingRootNode.createPDF(PageExportRenderingRootNode.java:403)
         at com.sap.ip.bi.webapplications.pageexport.PageExportRenderingRootNode.doExport(PageExportRenderingRootNode.java:97)
         at com.sap.ip.bi.webapplications.pageexport.PageExportRenderingRootNode.processRendering(PageExportRenderingRootNode.java:217)
         at com.sap.ip.bi.webapplications.runtime.impl.Page.processRenderingRootNode(Page.java:2735)
         at com.sap.ip.bi.webapplications.runtime.impl.Page.processRendering(Page.java:2478)
         at com.sap.ip.bi.webapplications.runtime.impl.Page.doProcessRequest(Page.java:2432)
         at com.sap.ip.bi.webapplications.runtime.impl.Page.processRequest(Page.java:2054)
         at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.doProcessRequest(Controller.java:931)
         at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.processRequest(Controller.java:873)
         at com.sap.ip.bi.webapplications.runtime.jsp.portal.services.BIRuntimeService.handleRequest(BIRuntimeService.java:324)
         at com.sap.ip.bi.webapplications.runtime.jsp.portal.components.LauncherComponent.doContent(LauncherComponent.java:21)
         at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
         at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
         at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
         at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
         at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
         at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
         at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
         at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
         at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:522)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:405)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:160)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Caused by: java.rmi.RemoteException: Service call exception; nested exception is:
         java.net.SocketTimeoutException: Read timed out
         at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:89)
         at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:99)
         at com.sap.tc.webdynpro.pdfobject.core.PDFObject.doSoapCall(PDFObject.java:382)
         ... 51 more
    Caused by: java.net.SocketTimeoutException: Read timed out
         at java.net.SocketInputStream.socketRead0(Native Method)
         at java.net.SocketInputStream.read(SocketInputStream.java:129)
         at java.io.BufferedInputStream.fill(BufferedInputStream.java:183)
         at java.io.BufferedInputStream.read(BufferedInputStream.java:201)
         at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.readLine(HTTPSocket.java:806)
         at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.getInputStream(HTTPSocket.java:341)
         at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.getResponseCode(HTTPSocket.java:250)
         at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.HTTPTransport.getResponseCode(HTTPTransport.java:362)
         at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.outputMessage(MimeHttpBinding.java:551)
         at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.call(MimeHttpBinding.java:1425)
         at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:82)
         ... 53 more
    #1.5#00187177BCAA0084000000140000144C00043EE523773518#1195053770252#com.sap.ip.bi.base.exception.BIBaseRuntimeException#sap.com/irj#com.sap.ip.bi.base.exception.BIBaseRuntimeException#PASS.TEST#1642##triombwd01.corp.net_BWD_9280250#PASS.TEST#45ddd21092c511dc9cbf00187177bcaa#SAPEngine_Application_Thread[impl:3]_58##0#0#Fatal#1#/Applications/BI#Plain###Exception thrown: com.sap.ip.bi.base.exception.BIBaseRuntimeException: Unknown Error
    com.sap.ip.bi.base.exception.BIBaseRuntimeException: Unknown Error
         at com.sap.ip.bi.export.xfa.impl.Document.writeWidthsAsXmlToStream(Document.java:419)
         at com.sap.ip.bi.export.xfa.widthcalc.WidthCalculator.<init>(WidthCalculator.java:55)
         at com.sap.ip.bi.export.xfa.impl.SizeCalculator.calc(SizeCalculator.java:88)
         at com.sap.ip.bi.export.impl.ExportController.calculateAndSetSizes(ExportController.java:569)
         at com.sap.ip.bi.export.impl.ExportController.doExportPrep(ExportController.java:454)
         at com.sap.ip.bi.export.impl.ExportController.convert(ExportController.java:368)
         at com.sap.ip.bi.export.controller.ExportResult.createExport(ExportResult.java:58)
         at com.sap.ip.bi.webapplications.pageexport.PageExportRenderingRootNode.createPDF(PageExportRenderingRootNode.java:403)
         at com.sap.ip.bi.webapplications.pageexport.PageExportRenderingRootNode.doExport(PageExportRenderingRootNode.java:97)
         at com.sap.ip.bi.webapplications.pageexport.PageExportRenderingRootNode.processRendering(PageExportRenderingRootNode.java:217)
         at com.sap.ip.bi.webapplications.runtime.impl.Page.processRenderingRootNode(Page.java:2735)
         at com.sap.ip.bi.webapplications.runtime.impl.Page.processRendering(Page.java:2478)
         at com.sap.ip.bi.webapplications.runtime.impl.Page.doProcessRequest(Page.java:2432)
         at com.sap.ip.bi.webapplications.runtime.impl.Page.processRequest(Page.java:2054)
         at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.doProcessRequest(Controller.java:931)
         at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.processRequest(Controller.java:873)
         at com.sap.ip.bi.webapplications.runtime.jsp.portal.services.BIRuntimeService.handleRequest(BIRuntimeService.java:324)
         at com.sap.ip.bi.webapplications.runtime.jsp.portal.components.LauncherComponent.doContent(LauncherComponent.java:21)
         at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
         at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
         at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
         at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
         at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
         at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
         at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
         at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
         at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:522)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:405)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:160)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Caused by: com.sap.tc.webdynpro.pdfobject.core.PDFObjectRuntimeException: Service call exception; nested exception is:
         java.net.SocketTimeoutException: Read timed out
         at com.sap.tc.webdynpro.pdfobject.core.PDFObject.doSoapCall(PDFObject.java:405)
         at com.sap.tc.webdynpro.pdfobject.core.PDFObject.createPDF(PDFObject.java:334)
         at com.sap.ip.bi.export.xfa.impl.Document.writeWidthsAsXmlToStream(Document.java:413)
         ... 49 more
    Caused by: java.rmi.RemoteException: Service call exception; nested exception is:
         java.net.SocketTimeoutException: Read timed out
         at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:89)
         at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:99)
         at com.sap.tc.webdynpro.pdfobject.core.PDFObject.doSoapCall(PDFObject.java:382)
         ... 51 more
    Caused by: java.net.SocketTimeoutException: Read timed out
         at java.net.SocketInputStream.socketRead0(Native Method)
         at java.net.SocketInputStream.read(SocketInputStream.java:129)
         at java.io.BufferedInputStream.fill(BufferedInputStream.java:183)
         at java.io.BufferedInputStream.read(BufferedInputStream.java:201)
         at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.readLine(HTTPSocket.java:806)
         at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.getInputStream(HTTPSocket.java:341)
         at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.getResponseCode(HTTPSocket.java:250)
         at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.HTTPTransport.getResponseCode(HTTPTransport.java:362)
         at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.outputMessage(MimeHttpBinding.java:551)
         at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.call(MimeHttpBinding.java:1425)
         at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:82)
         ... 53 more
    #1.5#00187177BCAA0084000000170000144C00043EE5237744D3#1195053770252#com.sap.ip.bi.base.application.message.impl.MessageBase#sap.com/irj#com.sap.ip.bi.base.application.message.impl.MessageBase#PASS.TEST#1642##triombwd01.corp.net_BWD_9280250#PASS.TEST#45ddd21092c511dc9cbf00187177bcaa#SAPEngine_Application_Thread[impl:3]_58##0#0#Error#1#/Applications/BI#Plain###A message was generated:
    ERROR
    Error while generating PDF
    com.sap.ip.bi.webapplications.pageexport.PageExportRenderingRootNode PageExportRenderingRootNode_0001
    Error while generating PDF
    com.sap.ip.bi.webapplications.pageexport.PageExportRenderingRootNode PageExportRenderingRootNode_0001#

    Hi Glenn,
    i faced the same problem
    did you solve yours meanwhile ?
    regards,
    Carsten

  • The boot configuration data for your Pc is missing or contains errors: error code 0x000014c

    Hello, 
    See if any body may help here... I get this blue screen:
    RECOVERY
    Your PC needs to be repaired: 
    The Boot Configuration Data for your PC is missing or contains errors.
    file:\\EFI\Microsoft\Boot\BCD
    Error code: 0xc000014c
    You'll need to use the recovery tools on your installation media. If you don't have any installation media (like a a disc or USB device), contact your system administrator or PC manufacturer.
    Press Esc for UEFI Firmware Settings
    First I was able to get into the option 11 and run the whole factory reset, i was so happy because I tought it will be easy.. but then after I did the factory reset.. I keep getting this blue screen. if I press ESC I get into this next screen:
    F1 System Information
    F2 System Diagnostics
    F9 Boot Device Options
    F10 BIOS Setup
    F11 System Recovery
    ENTER - Continue Startup.
    this is what happen when I click any of this options:
    F1 I get into the System Information with no problems, then I click <ESC> to continue and get back to the last screen... then I press F2 and super, I am able to run Memory Test and Hard Drive Check 100% with no problems in any of those, after I am done with my teste I press exit and I am back to the F1,F2, ETC menu... now I want to try F9, F10 or F11. bummer.. in this 3 options I get back to the blue screen described at the beggining of this post. (I already connect a USB with an boot loader, which works perfectly) 
    so I can't do anything, nothing at all!! crazzines. 
    So what I did to check why I can't get into the BIOS or at least to boot from my USB... I removed the botton cover of my laptop and removed the hard drive and that's how then I was or I am able to Log into the BIOS, - I did the changes to boot first from the USB and then from the HD and this is how I was able to boot from the USB - BUT If I connect back the Hard drive, I am not able to get into the BIOS or boot from the USB - so basically I am stuck in this blue screen and I can't boot from a USB if I have the HD connected.. I can't use any option.. no BIOS, nothing.. only if again, i disconnect the HD.  
    This is an:
    HP ENVY TS Sleekbook 4
    PRODUCT NUMBER  D1A99UA#ABA
    SYSTEM BOARD ID: 1894
    Bios F.25 
    **** I though that by updating the BIOS I may be able to get help, nothing. What I did is, I removed the HD and then and boot from the USB and with a DOS command propmt I excecuted the Bios Update from F.21 to f.25... but again, when I installed the hard drive back, BUMMER, nothing I can't do nothing but this silly blue screen. 
    Any idea of what should I do? 
    Thanks in advance.
    This question was solved.
    View Solution.

    If you can't access BIOS with the hard disk connected, you certainly won't be able to boot to the usb recovery flashdrive. That is indicative of a failed hard disk.
    Install a new hard disk and then boot to the recovery flashdrive.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

Maybe you are looking for

  • Abnormal behavior of READ_TEXT for PO text in ME23N

    Hi SAP Gurus, I am facing the following issue in reading PO text from ME23N. I am using function module READ_TEXT to read the text. For the first time the function module is not reading the text. If I edit the text and save, Then the function module

  • Looking for a script that get images' urls from a website

    Hi, I have a website where users can insert theirs hotel informations. Most of them do not insert photos, I guess because the procedure is quite long and difficoult for the average user's skills. I'm looking for a script that take as input the url of

  • Quantity update of material type

    Hi all, I have a question with regards to material type. Letu2019s say if I can a new material type with both purchasing and sales view, and unchecked the u201CQuantity Updatingu201D checkbox, and checked the u201CValue Updatingu201D checkbox in the

  • We have two iTunes account, can we share the content?

    My husband has his iTunes account and his iPod, I recently bought my iPhone nd my iPad and setted up my own itunes account. Is there a way that I can have access to the music he has purchased + the apps that I have purchased? Thanks for the help, I a

  • JTabbedPane display problems

    Can someone help me with this? I have a JTabbedPane in an applet with two tabs. Lately I have noticed that when I move the mouse pointer around on one tab, some components from the other tab start to show through and I can even click on them, resulti