Auto update stats disabled for a user Database in Sql server

While trying to improve the performance of few queries, we found via execution plan that there were lot of Index/Clustered index seeks. Therefore:
First thing we did, was to check our Re-indexing and update stats job which runs weekly for this user DB ( Around 400 GB in size and is used 24*5). The job was running fine.
Later when we ran SP_Blitz, we came to know that auto-update-stats is disabled for this user DB. We expected this to be a possible cause and change it from false to TRUE(Auto update stats)
Also, per SP_blitz there are user-created statistics for this DB. When ran the query to check how many, we saw around 7K user stats out there.
So my question would be 1) setting the Auto update stats to TRUE would require a reboot or once changed i need to track the performance and 2) Should we consider dropping those user created stats or manually look into them one by one.
How should we proceed on this, please suggest, thanks!

There may be good reasons for having auto-stats off, but those cases are not very common. It makes a little more sense to turn if off on table level. An example of the latter is a relatively small table, say < 100000 rows where not many new rows are added,
but the existing rows are being updated frequently. This will trigger autostats, but probably without much benefit.
But if you have a system which is very busy during peak times, you may not want autostats take resources during those hours. But if you turn off autostats, you will need to make sure that stats are updated in some other fashion.
Here is a query that you can use review when your statistics last were updated:
SELECT o.name, s.name, stats_date(o.object_id, s.stats_id) AS lastupdated
FROM sys.objects o
JOIN sys.stats s ON s.object_id = o.object_id
--WHERE s.user_created = 1
ORDER BY lastupdated
7000 user-created statistics sounds a little excessive, but I guess they were added to compensate for the autostats that SQL Server were not permitted to create. I would not recommend dropping these statistics, as SQL Server would spend cycles on recreating
them.
You should not have to restart SQL Server for the Auto-update stats setting to take effect; it takes effect immediately.
Erland Sommarskog, SQL Server MVP, [email protected]

Similar Messages

Disable JRE Auto update in Vista for all users?

I feel like a complete idiot that I can't figure this out, but it's either so obvious I'm overlooking it, or I just plain can't figure it out, so I'm hoping someone here can help.
We have not yet been able to figure out how to simply disabled the Auto Update option when installing JRE under Vista, so it will never check for updates, no matter what user is logged into a pc. I've just installed the newest version 1.6.0_05-b13, but get the same results.
Basically, we are creating a "base clone image" of a Vista workstation and we need the auto update feature of the JRE to be disabled so it doesn't check for updates. When a new user logs into the pc, we want them to 'inherit' this setting from the default user profile, or we simply want a 'global' setting on the pc that stops all JAVA update checks from occuring. But even though there are multiple registry keys that 'look' like they control the auto update function, no matter how we set them the update option still shows it is enabled when you open the JAVA control panel.
We have 2 basic problems:
- When a standard user runs the JAVA Control Panel applet and they select the 'Update' tab, the option to "uncheck" autoupdates is "grayed out". If we make the user a local administrator, then it is not grayed out anymore and they can set the option. Problem is, we have thousands of users and none of them are local administrators, hence the problem of getting it to already be defaulted to not check for updates. How do we get the update checkbox to NOT be grayed out for a NON-administrator?
- How do we set the 'global' (or default) option to disable the auto update checkbox for ALL users? No matter what we try, when a new user logs in, the auto update feature is still enabled after their initial profile is generated from the first time login.
I was able to figure out if I change the "EnableJavaUpdate" value in the below registry key, it will "remove" the Update tab from the JAVA Control Panel. But does the simply remove the tab? Or does it remove the tab AND disable auto updates for ALL users on the computer?
HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Update\Policy
I've sent multiple emails to Sun asking for help on what should be a simple thing to do, but have never received a reply from them.
Keith Hemmelman

Thank you for the reply. I apologize for not getting back here sooner.
We actually already use a deployment.properties file located under the Default User profile on our Vista setup. It's located under the "C:\Users\Default\AppData\LocalLow\Sun\Java\Deployment" folder. This file does get copied over to a new user profile when a new person logs in. This is what we want since we have set things like the maximum cache size and temporary file location.
The problem though is there is no setting that disables the automatic update check within this file. The best I can figure out is that for some reason under the Vista environment, the auto update setting is controlled in the registry at: HKEY_CURRENT_USER\Software\JavaSoft\Java Update\Policy
There is a REG_BINARY key there that appears to control this option. It is named "EnableAutoUpdateCheck". The problem is that the value of this key is "several" characters long and it is "different" from one user to the next. I tried disabling auto update under the Java Control Panel and then copied the value of this key into the same aread of the Default User hive but when a new user logs in, it ignores that setting and auto update is still enabled. I also tried using a simple "0" to disable the autoupdate or a "1" to enable it for this key, but it doesn't work either. (This is very frustrating why there isn't a simple 1 or 0 setting to turn the auto update setting on/off.)
We had no problem getting this to work under XP. Basically we didn't have to do anything special in XP. We simply created a temporary user account and made all the settings we wanted and then copied that profile over to our Default User profile and the Java autoupdate setting under the Java Control Panel was disabled for all new users. We did the same thing under Vista, but the auto update setting was ignored and re-enabled for all new users.
I read through the settings for the deployment.properties file located at the below link, but there is nothing there to control the auto update setting.
http://java.sun.com/j2se/1.5.0/docs/guide/deployment/deployment-guide/properties.html
Thus, we can't get the auto update setting to be disabled in the default user profile so it will in turn be disabled for all new users that log into the computer. This is extremely frustrating.
The other equally frustrating problem we have run into under the Vista environment is that when you run the Java Control Panel, the option to disable the auto update check is "grayed out" and the user can't uncheck this option to disable auto update. We have found you must be an administrator before this option is no longer grayed out. Since none of our thousands of users are admins, this is also a problem for us. (This option works fine for a standard user if you are on a XP machine though. It's just Vista where things have changed.)
I've sent repeated emails to Sun in the past asking for help, but they never replied.
Keith

Selective XML Index feature is not supported for the current database version , SQL Server Extended Events , Optimizing Reading from XML column datatype

Team , Thanks for looking into this ..
As a last resort on optimizing my stored procedure ( Below ) i wanted to create a Selective XML index ( Normal XML indexes doesn't seem to be improving performance as needed ) but i keep getting this error within my stored proc . Selective XML
Index feature is not supported for the current database version.. How ever
EXECUTE sys.sp_db_selective_xml_index; return 1 , stating Selective XML Indexes are enabled on my current database .
Is there ANY alternative way i can optimize below stored proc ?
Thanks in advance for your response(s) !
/****** Object: StoredProcedure [dbo].[MN_Process_DDLSchema_Changes] Script Date: 3/11/2015 3:10:42 PM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
-- EXEC [dbo].[MN_Process_DDLSchema_Changes]
ALTER PROCEDURE [dbo].[MN_Process_DDLSchema_Changes]
AS
BEGIN
SET NOCOUNT ON --Does'nt have impact ( May be this wont on SQL Server Extended events session's being created on Server(s) , DB's )
SET TRANSACTION ISOLATION LEVEL READ UNCOMMITTED
select getdate() as getdate_0
DECLARE @XML XML , @Prev_Insertion_time DATETIME
-- Staging Previous Load time for filtering purpose ( Performance optimize while on insert )
SET @Prev_Insertion_time = (SELECT MAX(EE_Time_Stamp) FROM dbo.MN_DDLSchema_Changes_log ) -- Perf Optimize
-- PRINT '1'
CREATE TABLE #Temp
EventName VARCHAR(100),
Time_Stamp_EE DATETIME,
ObjectName VARCHAR(100),
ObjectType VARCHAR(100),
DbName VARCHAR(100),
ddl_Phase VARCHAR(50),
ClientAppName VARCHAR(2000),
ClientHostName VARCHAR(100),
server_instance_name VARCHAR(100),
ServerPrincipalName VARCHAR(100),
nt_username varchar(100),
SqlText NVARCHAR(MAX)
CREATE TABLE #XML_Hold
ID INT NOT NULL IDENTITY(1,1) PRIMARY KEY , -- PK necessity for Indexing on XML Col
BufferXml XML
select getdate() as getdate_01
INSERT INTO #XML_Hold (BufferXml)
SELECT
CAST(target_data AS XML) AS BufferXml -- Buffer Storage from SQL Extended Event(s) , Looks like there is a limitation with xml size ?? Need to re-search .
FROM sys.dm_xe_session_targets xet
INNER JOIN sys.dm_xe_sessions xes
ON xes.address = xet.event_session_address
WHERE xes.name = 'Capture DDL Schema Changes' --Ryelugu : 03/05/2015 Session being created withing SQL Server Extended Events
--RETURN
--SELECT * FROM #XML_Hold
select getdate() as getdate_1
-- 03/10/2015 RYelugu : Error while creating XML Index : Selective XML Index feature is not supported for the current database version
CREATE SELECTIVE XML INDEX SXI_TimeStamp ON #XML_Hold(BufferXml)
FOR
PathTimeStamp ='/RingBufferTarget/event/timestamp' AS XQUERY 'node()'
--RETURN
--CREATE PRIMARY XML INDEX [IX_XML_Hold] ON #XML_Hold(BufferXml) -- Ryelugu 03/09/2015 - Primary Index
--SELECT GETDATE() AS GETDATE_2
-- RYelugu 03/10/2015 -Creating secondary XML index doesnt make significant improvement at Query Optimizer , Instead creation takes more time , Only primary should be good here
--CREATE XML INDEX [IX_XML_Hold_values] ON #XML_Hold(BufferXml) -- Ryelugu 03/09/2015 - Primary Index , --There should exists a Primary for a secondary creation
--USING XML INDEX [IX_XML_Hold]
---- FOR VALUE
-- --FOR PROPERTY
-- FOR PATH
--SELECT GETDATE() AS GETDATE_3
--PRINT '2'
-- RETURN
SELECT GETDATE() GETDATE_3
INSERT INTO #Temp
EventName ,
Time_Stamp_EE ,
ObjectName ,
ObjectType,
DbName ,
ddl_Phase ,
ClientAppName ,
ClientHostName,
server_instance_name,
nt_username,
ServerPrincipalName ,
SqlText
SELECT
p.q.value('@name[1]','varchar(100)') AS eventname,
p.q.value('@timestamp[1]','datetime') AS timestampvalue,
p.q.value('(./data[@name="object_name"]/value)[1]','varchar(100)') AS objectname,
p.q.value('(./data[@name="object_type"]/text)[1]','varchar(100)') AS ObjectType,
p.q.value('(./action[@name="database_name"]/value)[1]','varchar(100)') AS databasename,
p.q.value('(./data[@name="ddl_phase"]/text)[1]','varchar(100)') AS ddl_phase,
p.q.value('(./action[@name="client_app_name"]/value)[1]','varchar(100)') AS clientappname,
p.q.value('(./action[@name="client_hostname"]/value)[1]','varchar(100)') AS clienthostname,
p.q.value('(./action[@name="server_instance_name"]/value)[1]','varchar(100)') AS server_instance_name,
p.q.value('(./action[@name="nt_username"]/value)[1]','varchar(100)') AS nt_username,
p.q.value('(./action[@name="server_principal_name"]/value)[1]','varchar(100)') AS serverprincipalname,
p.q.value('(./action[@name="sql_text"]/value)[1]','Nvarchar(max)') AS sqltext
FROM #XML_Hold
CROSS APPLY BufferXml.nodes('/RingBufferTarget/event')p(q)
WHERE -- Ryelugu 03/05/2015 - Perf Optimize - Filtering the Buffered XML so as not to lookup at previoulsy loaded records into stage table
p.q.value('@timestamp[1]','datetime') >= ISNULL(@Prev_Insertion_time ,p.q.value('@timestamp[1]','datetime'))
AND p.q.value('(./data[@name="ddl_phase"]/text)[1]','varchar(100)') ='Commit' --Ryelugu 03/06/2015 - Every Event records a begin version and a commit version into Buffer ( XML ) we need the committed version
AND p.q.value('(./data[@name="object_type"]/text)[1]','varchar(100)') <> 'STATISTICS' --Ryelugu 03/06/2015 - May be SQL Server Internally Creates Statistics for #Temp tables , we do not want Creation of STATISTICS Statement to be logged
AND p.q.value('(./data[@name="object_name"]/value)[1]','varchar(100)') NOT LIKE '%#%' -- Any stored proc which creates a temp table within it Extended Event does capture this creation statement SQL as well , we dont need it though
AND p.q.value('(./action[@name="client_app_name"]/value)[1]','varchar(100)') <> 'Replication Monitor' --Ryelugu : 03/09/2015 We do not want any records being caprutred by Replication Monitor ??
SELECT GETDATE() GETDATE_4
-- SELECT * FROM #TEMP
-- SELECT COUNT(*) FROM #TEMP
-- SELECT GETDATE()
-- RETURN
-- PRINT '3'
--RETURN
INSERT INTO [dbo].[MN_DDLSchema_Changes_log]
[UserName]
,[DbName]
,[ObjectName]
,[client_app_name]
,[ClientHostName]
,[ServerName]
,[SQL_TEXT]
,[EE_Time_Stamp]
,[Event_Name]
SELECT
CASE WHEN T.nt_username IS NULL OR LEN(T.nt_username) = 0 THEN t.ServerPrincipalName
ELSE T.nt_username
END
,T.DbName
,T.objectname
,T.clientappname
,t.ClientHostName
,T.server_instance_name
,T.sqltext
,T.Time_Stamp_EE
,T.eventname
FROM
#TEMP T
/** -- RYelugu 03/06/2015 - Filters are now being applied directly while retrieving records from BUFFER or on XML
-- Ryelugu 03/15/2015 - More filters are likely to be added on further testing
WHERE ddl_Phase ='Commit'
AND ObjectType <> 'STATISTICS' --Ryelugu 03/06/2015 - May be SQL Server Internally Creates Statistics for #Temp tables , we do not want Creation of STATISTICS Statement to be logged
AND ObjectName NOT LIKE '%#%' -- Any stored proc which creates a temp table within it Extended Event does capture this creation statement SQL as well , we dont need it though
AND T.Time_Stamp_EE >= @Prev_Insertion_time --Ryelugu 03/05/2015 - Performance Optimize
AND NOT EXISTS ( SELECT 1 FROM [dbo].[MN_DDLSchema_Changes_log] MN
WHERE MN.[ServerName] = T.server_instance_name -- Ryelugu Server Name needes to be added on to to xml ( Events in session )
AND MN.[DbName] = T.DbName
AND MN.[Event_Name] = T.EventName
AND MN.[ObjectName]= T.ObjectName
AND MN.[EE_Time_Stamp] = T.Time_Stamp_EE
AND MN.[SQL_TEXT] =T.SqlText -- Ryelugu 03/05/2015 This is a comparision Metric as well , But needs to decide on
-- Peformance Factor here , Will take advise from Lance if comparision on varchar(max) is a vital idea
--SELECT GETDATE()
--PRINT '4'
--RETURN
SELECT
top 100
[EE_Time_Stamp]
,[ServerName]
,[DbName]
,[Event_Name]
,[ObjectName]
,[UserName]
,[SQL_TEXT]
,[client_app_name]
,[Created_Date]
,[ClientHostName]
FROM
[dbo].[MN_DDLSchema_Changes_log]
ORDER BY [EE_Time_Stamp] desc
-- select getdate()
-- ** DELETE EVENTS after logging into Physical table
-- NEED TO Identify if this @XML can be updated into physical system table such that previously loaded events are left untoched
-- SET @XML.modify('delete /event/class/.[@timestamp="2015-03-06T13:01:19.020Z"]')
-- SELECT @XML
SELECT GETDATE() GETDATE_5
END
GO
Rajkumar Yelugu

@@Version : ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Microsoft SQL Server 2012 - 11.0.5058.0 (X64)
   May 14 2014 18:34:29
   Copyright (c) Microsoft Corporation
   Developer Edition (64-bit) on Windows NT 6.2 <X64> (Build 9200: ) (Hypervisor)
(1 row(s) affected)
Compatibility level is set to 110 .
One of the limitation states - XML columns with a depth of more than 128 nested nodes
How do i verify this ? Thanks .
Rajkumar Yelugu

Auto update flash player for standard user without notification

Hello, I hope I don't ask an already answered question, I've searched around without finding precisely what I'm looking for, but if I've missed something please point me in the right direction.
I'd like to know if there is a way for flash player to be automatically updated while a standard user is connected (no admin rights) and without any notifications.
So far I configured the mms.cfg file (in c:\Windows\SysWOW64\Macromed\Flash for a win7 64bit) with those settings:
AutoUpdateDisable=0
AutoUpdateInterval=0
SilentAutoUpdateEnable=1
SilentAutoUpdateVerboseLogging=1
(the autoUpdateInterval=0 is for testing, I plan to put a 7days delay
I plan to update all our clients with the latest version of flash player via sccm and add this file during the process.
Then I hope that I won't have to push any other updates (until I guess version 11.5 or maybe even 12...)
Will those settings will work as I intended?
As we'll use 32 bits browsers do I need to put this file also in c$\Windows\System32\Macromed\Flash ?
If it wont work, is it doable?
thanks!

Hi ersatyle,
Thanks for clarifying.
will flash player be automatically updated while a standard user is connected (no admin rights) and without any notifications.
By pointing the Background Updater to an internal server, yes.
Are those settings will work as I intended?
The AutoUpdateInterval setting in the mms.cfg has no effect on the Background Updater. AutoUpdateInterval can only be used for the notification updater. If you're setting up background updates from an internal server, this property is best dropped from the mms.cfg to avoid confusion. The other settings will work as expected. Once you have your clients set up and tested, I also recommend dropping SilentAutoUpdateVerboseLogging, since this will reduce the size of the log file.
As we'll use 32 bits browsers do I need to put the mms.cfg file also in c$\Windows\System32\Macromed\Flash, If it wont work, is it doable?
There is only one location for the mms.cfg. The same file is used for 32-bit and 64-bit browsers. From the administration guide, page 22:
mms.cfg file location:
Assuming a default Windows installation, Flash Player looks for the mms.cfg file in the following system directories:
•32-bit Windows - %WINDIR%\System32\Macromed\Flash
•64-bit Windows - %WINDIR%\SysWow64\Macromed\Flash
Note: The %WINDIR% location represents the Windows system directory, such as C:\WINDOWS.
I hope this answers your questions. Let us know if there's anything else.
-Stephen

Failed to update permissions used for end-user recovery on . Permissions update failed for the following reason: (ID 3123)

I patched 2012 to the SP1 level and now I'm getting these warnings on many servers.
It seems to be considering these items as removable media?
DPM 2012, SP1, version 4.1.3313.0
Failed to update permissions used for end-user recovery on skutter.pmuk.net. Permissions update failed for the following reason: (ID 3123)
Affected area: skutter.pmuk.net
Occurred since: 11/01/2013 09:04:43
Description: Failed to update permissions used for end-user recovery on skutter.pmuk.net. Permissions update failed for the following reason: (ID 3123)
DPM is unable to enumerate contents in 2aad3f75a7e54a0f91b640d7f158f00a , 5702fef3756e4ca8af0554013951f32d , 78f9e6070fbd43aeb328700a88a3c926 , aquaria.pmuk.net_MTATempStore$ , ariel.pmuk.net_MTATempStore$ , atlantis.pmuk.net_downloads , atlantis.pmuk.net_MTATempStore$
, atlantis.pmuk.net_print$ , capricorn.pmuk.net_MTATempStore$ , CCM.pmuk.net_IvrDirectory , CCM.pmuk.net_MTATempStore$ , CHIRON.pmuk.net_MTATempStore$ , cpeserv-i03.pmuk.net_IMAGING , defiant.pmuk.net_idsc , defiant.pmuk.net_MTATempStore$ ,firebird.pmuk.net_Accts_serve
, firebird.pmuk.net_case , firebird.pmuk.net_Control ,firebird.pmuk.net_Fuel Cell , firebird.pmuk.net_HADCAD , firebird.pmuk.net_haddesign , firebird.pmuk.net_hadendurancelab , firebird.pmuk.net_HADEngCad , firebird.pmuk.net_HADPCLGainspeed ,firebird.pmuk.net_HADPCLProjects
,firebird.pmuk.net_HADPCLQuality , firebird.pmuk.net_HADPCLStandards , firebird.pmuk.net_hrXerox , firebird.pmuk.net_hs , firebird.pmuk.net_ITXerox , firebird.pmuk.net_JunHigashimura , firebird.pmuk.net_MTATempStore$ ,firebird.pmuk.net_office ,firebird.pmuk.net_OMPM
, firebird.pmuk.net_Outplacement ,firebird.pmuk.net_personal , firebird.pmuk.net_PJSESCANNER ,firebird.pmuk.net_pmuk ,firebird.pmuk.net_pwa ,firebird.pmuk.net_pwa2 , firebird.pmuk.net_scanfret ,firebird.pmuk.net_Siebel8 ,firebird.pmuk.net_Spares
,firebird.pmuk.net_test ,firebird.pmuk.net_TVDC ,firebird.pmuk.net_xeroxcpe$ ,firebird.pmuk.net_xeroxrd$ , HALLEY.pmuk.net_MTATempStore$ ,legion.pmuk.net_dfs ,legion.pmuk.net_MTATempStore$ , legion.pmuk.net_NETLOGON ,legion.pmuk.net_SYSVOL
, nemesis.pmuk.net_KEvin ,nemesis.pmuk.net_MTATempStore$ , PLEIDES.pmuk.net_Archive , PLEIDES.pmuk.net_DGHOME , PLEIDES.pmuk.net_MTATempStore$ ,PLEIDES.pmuk.net_print$ , roosevelt.pmuk.net_ARCserve$ ,roosevelt.pmuk.net_CHEYALERT$ , roosevelt.pmuk.net_HADQCEOLP
,roosevelt.pmuk.net_home3 , roosevelt.pmuk.net_MTATempStore$ ,roosevelt.pmuk.net_smssource , roosevelt.pmuk.net_WindowsEasyTransfer ,roosevelt.pmuk.net_XeroxScan , sagittarius.pmuk.net_MTATempStore$ ,sagittarius.pmuk.net_print$ , sakura.pmuk.net_MTATempStore$
,scorpia.pmuk.net_MTATempStore$ ,scorpion.pmuk.net_chandleram, scorpion.pmuk.net_Control ,scorpion.pmuk.net_CPE ,scorpion.pmuk.net_Digital ,scorpion.pmuk.net_Electrical , scorpion.pmuk.net_MTATempStore$ , scorpion.pmuk.net_NASUtils ,scorpion.pmuk.net_Personal
,scorpion.pmuk.net_QA ,scorpion.pmuk.net_QC , scorpion.pmuk.net_Technical , silverberg.pmuk.net_dfs ,silverberg.pmuk.net_MTATempStore$ ,silverberg.pmuk.net_NETLOGON , silverberg.pmuk.net_SYSVOL ,skutter.pmuk.net_dfs , skutter.pmuk.net_MTATempStore$ ,skutter.pmuk.net_NETLOGON
,skutter.pmuk.net_sharepoint-saver ,skutter.pmuk.net_SYSVOL , tempest.pmuk.net_MTATempStore$ , tempest.pmuk.net_Quarantine ,tempest.pmuk.net_SiteBackups , tempest.pmuk.net_tsdp , titania.pmuk.net_MTATempStore$ , valiant.pmuk.net_domino , valiant.pmuk.net_hadprod
, valiant.pmuk.net_MTATempStore$ ,valiant.pmuk.net_oracle ,vindaloo.pmuk.net_MTATempStore$ , virgon.pmuk.net_faxclient ,virgon.pmuk.net_FxsSrvCp$ ,virgon.pmuk.net_MTATempStore$ , xavier.pmuk.net_Address ,xavier.pmuk.net_downloads ,xavier.pmuk.net_drivers ,
xavier.pmuk.net_Exchange IS Starter ,xavier.pmuk.net_ExchangeOAB , xavier.pmuk.net_ExchangeUM , xavier.pmuk.net_MTATempStore$ , xavier.pmuk.net_out-arch , xavier.pmuk.net_Resources$ on the protected computer tower.pmuk.net. Recycle Bin, System Volume Information
folder, non-NTFS volumes, DFS links, CDs, Quorum Disk (for cluster) and other removable media cannot be protected. (ID 38 Details: )
Any Ideas? backups are OK, recovery points/sync's etc.
Mark.

I am using DPM 2012 R2, what finally worked to me to resolve my problem with EUR was to:
In DPM I disabled EUR
In Computer Management delete all DPM Shares (\\?\c:\Program Files\...)
Using ADSI edit go to CN=MS-ShareMapConfiguration,CN=System,DC=X,DC=Y (Replace X & Y for your domain)
Delete all of the mappings within the container
In DPM enable EUR
In DPM on a protection group I created a new recovery point and selected “Only synchronize (available only for file data)”
Related article on ADSI Edit and DPM -
http://social.technet.microsoft.com/Forums/en-US/e0258384-8422-408c-8839-2580d616a9ec/edsi-edit-related-to-data-protection-manager?forum=dpmfilebackup
I hope this helps
JD Young

Folder level Javascript disabled for a user

Hi Gurus,
I created a folder level JS, it works fine on all computer here exept on one. On one computer, the javascript's in the pdf are working but the function called in the folder level script is not executed. (when it works on all the others). The script is in the right folder and the pdf works on other computers. Do I have to enable something in the preferences of acrobat reader 9.1. I checked the settings for JS in edit/preference and they are the same as for the others.
Thanks for your help guys.

All the script does it to generate a mail with the mailto function. The Preferences-JavaScript are set as on my pc. So it must be something else. If I email the pdf to my pc, it works, so the pdf form is fine, the script is the same as on my pc.
--- En date de : Mer 2.9.09, try67 <[email protected]> a écrit :
De: try67 <[email protected]>
Objet: Folder level Javascript disabled for a user
À: "antony clark" <[email protected]>
Date: Mercredi 2 Septembre 2009, 13h35
That's why I recommended to make a
test script, to make sure folder-level
scripts are working on this machine.
There's no setting to specifically allow folder-level
scripts. If they are
properly placed and JS is enabled then they will launch.
However, if your script inserts menu items you should make
sure that this
option is checked under Preferences-JavaScript, the second
check-box from
the top. You should probably check all 4 boxes, just in
case.
>

Permission denied when creating database in Sql Server 2008 for SQLExpress

I'm getting an permission error while restoring the database. I'm using SQL Server 2008 SQLEXPRESS
I'm able to create the user using this script " CREATE LOGIN [darth\vader] FROM WINDOWS;
GO;"
But when I try to give role to the user it's still give me permission error.. SP_ADDSRVROLEMEMBER ‘darth\vader’, ‘sysadmin’
Can someone guide me how to resolve this issue?

http://msdn.microsoft.com/en-us/library/ms186858.aspx
Permissions
If the database being restored does not exist, the user must have CREATE DATABASE permissions to be able to execute RESTORE. If the database exists, RESTORE permissions default to members of the sysadmin and dbcreator fixed
server roles and the owner (dbo) of the database (for the FROM DATABASE_SNAPSHOT option, the database always exists).
RESTORE permissions are given to roles in which membership information is always readily available to the server. Because fixed database role membership can be checked only when the database is accessible and undamaged, which is not always the case when RESTORE
is executed, members of the db_ownerfixed database role do not have RESTORE permissions.
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

EKM using the Azure Key Vault is now available for SQL Database and SQL Server running in Azure VM's

In preview today, you can create keys in the Azure Key Vault, and use them with Azure SQL Database, or SQL Server running in a Azure VM. Use the Extensible Key Management (EKM) for TDE, backup encryption, or cell level encryption. For more information, see
Extensible Key Management Using Azure Key Vault (SQL Server)
http://msdn.microsoft.com/en-us/library/dn198405.aspx.
The announcement:
Azure Key Vault in public preview
Key Vault offers an easy, cost-effective way to safeguard keys and other sensitive data used by cloud applications and services. Included are the following features:
Enhance data protection and compliance:
Protect cryptographic keys and sensitive data like passwords with keys stored in Hardware Security Modules (HSMs). For added assurance, import or generate your keys in HSMs certified to FIPS 140-2 level 2 and Common Criteria EAL4 standards,
so that keys stay within the HSM boundary. Key Vault is designed so that Microsoft doesn’t see or extract your keys.
All the control, none of the work:
Provision new vaults and keys in minutes and centrally manage keys, sensitive data, and policies. You maintain control over your encrypted data—simply grant permission for your own and third-party applications to use keys as needed. Enable
developers to easily manage keys used for dev/test and migrate seamlessly to production keys managed by security operations.
Boost performance and achieve global scale: Improve
performance and reduce latency of cloud applications by storing cryptographic keys in the cloud (versus on-premises). Key Vault rapidly scales to meet the cryptographic needs of your cloud applications and match peak demand.
Get started with Azure Key Vault by creating keys for applications you develop,
SQL Server encryption (TDE, CLE, and Backup), and partner solutions like
CloudLink SecureVM.
Key Vault is available now at no charge with discounted preview pricing starting on January 15, 2015.
For more information, please visit the
Key Vault webpage. For a comprehensive look at pricing, please visit the
Key Vault Pricing webpage.
Rick Byham, Microsoft, SQL Server Books Online, Implies no warranty

Thank you for sharing this Rick.
Regards,
Alberto Morillo
SQLCoffee.com

Code for connecting to a Microsoft SQL server database

Hi
What is the code for connection to a Microsoft SQL server database using JSP? I know the structure of the code but i do not know the driver name. Any importing required besides java.sql?
Thanks

Back up there. JSP's should never contain any
database code. You should write a bean to handle
database transactions and call that from your JSP.I agree wholeheartedly with that.
Why didn't you consult google to help you with your
problem? The answer is on the MS website.
http://support.microsoft.com/default.aspx?scid=kb;en-u
s;313100This is correct, too. Isn't Google installed on your machine?
%

Error when creating a database on SQL Server 2012(Virtual Machine)

Hi,
I create a virtual machine on VMWare Workstation 10, then install Windows 7(32bit), then install SQL Server 2012 Enterprise version.
Then I write a Visual C++2008 program and using ADO to connect to the local SQL Server, with the connection string below:
“Provider=sqloledb;Data Source=(local);Integrated Security=SSPI;”
The connect succeed, then I try to create a new SQL Server database by calling:
m_pConnection->Execute(_T(“create database MyDatabase on primary (name = ‘MyDatabase’, filename = ‘E:\\MyDatabase.mdf’)”), NULL, 0);
where E: is a USB drive plugged in.
When running the above statement, I can even see the MyDatabase.mdf file is being created, but finally get an error and error number is 80040e31 when checking the error from m_pConnection, after analyzing the com exception, we find it reports the error as
“IDispath error #3121”. Both errors seem to indicate a “Timeout error”.
Then I try to create the database on the local drive in the virtual machine, as follows:
m_pConnection->Execute(_T(“create database MyDatabase on primary (name = ‘MyDatabase’, filename = ‘C:\\MyDatabase.mdf’)”), NULL, 0);
Then I get error number: 80040e14 from m_pConnection, and com error is “IDispath error #3092”
What is the problem?
Thanks

Hello chcw,
SQL Server 2012 Enterprise doesn't support to install on Windows 7 Opeating System. For detail information, please refer to the article below:
The article shows the operating system requirements for the principal editions of SQL Server 2012:
http://msdn.microsoft.com/en-us/library/ms143506.aspx#top_principal
Here is an article for your reference, please see:
How To Create a SQL Server Database Programmatically by Using ADO.NET and Visual C# .NET:
https://support.microsoft.com/kb/307283/en-us
If you have any feedback on our support, please click
here.
Regards,
Elvis Long
TechNet Community Support

How to connect to a specific database in SQL server

Hi,
How can I connect to a specific database in SQL server? I used the following statement. But my table is inserted to the 'master' database in the SQL server. How can I insert my tables to the specific database tahta I have created before?
Connection con;
String sURL = "jdbc:microsoft:sqlserver://SERVER_NAME:1433";
con = DriverManager.getConnection ( sURL, sUsername, sPassword);

Hi,
When I use the syntax:
String sURL = "jdbc:microsoft:sqlserver://SERVER_NAME:1433/DATABASE_NAME;selectMethod=cursor";
it gives an error as follows:
problems connecting to jdbc:microsoft:sqlserver://SERVER_NAME:1433/DATABASE_NAME;selectMethod=cursor:
[Microsoft][SQLServer 2000 Driver for JDBC]Unable to connect. Invalid URL.
What is the way to connect to a specific database?

How to access database in Sql Server 7.0 using Java

I am trying to access a database in SQL Server 7.0 using JDBC.But it is giving me errors.I have used following statements to connect the database
private String URL = "jdbc:odbc:DatabaseName";
private String userName="user";
private String passWord="password";
Class.forName( "sun.jdbc.odbc.SQLServerDriver" );
connection = DriverManager.getConnection( URL,userName,"passWord" );
where "username" and "password" are user Name and password respectively to access the database in SQL Server 7.0.

I am sorry but I have written like;
private String URL = "jdbc:odbc:DatabaseName";
private String userName="user";
private String passWord="password";
Class.forName( "sun.jdbc.odbc.jdbcOdbcDriver" );
connection = DriverManager.getConnection( URL,userName,"passWord" );
where "username" and "password" are user Name and password respectively to access the database in SQL Server 7.0. And I have used the same name in "ODBC data source" as that of the database.I am trying some examples from book and these examples just work fine with MS Access( I created those databases in Access and tried the examples) but not with SQL Server 7.0. Do I need a separate driver or something?

How to repair database using SQL server 2008 and C#

How to repair database in SQL server 2008 using C#
Musakkhir Sayyed.

Unfortunately your post is off topic as it's not specific to SQL Server Samples and Community Projects.
This is a standard response I’ve written in advance to help the many people who post their question in this forum in error, but please don’t ignore it. The links I provide below will help you determine the right forum to ask your
question in.
For technical issues with Microsoft products that you would run into as an end user, please visit the Microsoft Answers forum ( http://answers.microsoft.com ) which has sections for Windows, Hotmail,
Office, IE, and other products.
For Technical issues with Microsoft products that you might have as an IT professional (like technical installation issues, or other IT issues), please head to the TechNet Discussion forums at http://social.technet.microsoft.com/forums/en-us, and
search for your product name.
For issues with products you might have as a Developer (like how to talk to APIs, what version of software do what, or other developer issues), please head to the MSDN discussion forums at http://social.msdn.microsoft.com/forums/en-us, and
search for your product or issue.
If you’re asking a question particularly about one of the Microsoft Dynamics products, a great place to start is here: http://community.dynamics.com/
If you think your issue is related to SQL Server Samples and Community Projects and I've flagged it as Off-topic, I apologise. Please repost your question and include as much detail as possible about your problem so that someone can assist you further.
If you really have no idea where to post your question please visit the Where is the forum for…? forum http://social.msdn.microsoft.com/forums/en-us/whatforum/
When you see answers and helpful posts, please click Vote As Helpful,
Propose As Answer, and/or Mark As Answer
Jeff Wharton
MSysDev (C.Sturt), MDbDsgnMgt (C.Sturt), MCT, MCPD, MCSD, MCSA, MCITP, MCDBA
Blog: Mr. Wharty's Ramblings
Twitter: @Mr_Wharty
MC ID:
Microsoft Transcript

Can i open an SQL express 2005 database in SQL server express 2012?

Hi,
i have a database and it's in SQL express 2005 but because my windows 8 is not compatible with the installer, i have to install the latest 2012 installer. my problem now is that i cannot open it in the 2012 edition..what do i have to do?

Hi white_roses,
Could you let us know how do you restore the database to SQL Server 2012 Express edition? Please help to collect the detail error information of this issue, it will benefit for us to do further investigation.
As Sandesh and ED suggested above, we can directly detach our databases from SQL Server 2005 and then attach them to SQL Server 2012. For detail steps, please refer to the following article:
http://msdn.microsoft.com/en-us/library/ms187858.aspx
After we move a database from the instance of SQL Server on server A to the instance of SQL Server on server B, users may be unable to log in to the database on server B. If need the logins information on Server B, please refer to the following article:
http://support.microsoft.com/kb/918992
If you have any question, please feel free to let me know.
Thanks,
Jerry Li

Cannot connect to Oracle 11gR2 database from SQL Server 2005

Both SQL Server (Windows) and Oracle (Linux) are in 64bit environments.
I have done the following on a Windows 2008 R2 with SQL Server 2005:
Install InstantClient from Oracle Database 11g Release 2 Client (11.2.0.1.0) for Microsoft Windows (x64) to C:\Oracle
Install oledb from 64-bit ODAC 11.2 Release 3 (11.2.0.2.1) for Windows x64 by executing install.bat oledb c:\oracle odac
Note: Not sure whether 11.2.0.2.1 version of ODAC will cause any problem since I cannot find 11.2.0.1.0 version.
I have checked the Allow inprocess of OraOLEDB.Oracle provider in SSMS.
I have executed sp_addlinkedserver @server = 'ORACLE_TEST', @srvproduct = 'Oracle', @provider = 'OraOLEDB.Oracle', @datasrc = '##.##.##.##:1521/TEST'
The ##.##.##.## is the ip address of the Linux server which has the Oracle 11gR2 database TEST.
I have executed sp_addlinkedsrvlogin @rmtsrvname = 'ORACLE_TEST', @useself = 'FALSE', @rmtuser = 'xxxx', @rmtpassword = 'yyyy'
The xxxx is the oracle username and yyyy is the password for the oracle user xxxx.
I know the oracle database TEST is up since I have setup connection in Oracle SQL Developer having:
##.##.##.## as the hostname
1521 as the Port
xxxx as the username
yyyy as the password
TEST as the service name
When I click Test Connection for the linked server ORACLE_TEST in SSMS, it just hang.
When I issue a query like select count(*) from oracle_test..xxxx.table1, it just run forever. I'm not so sure how to query an oracle table. I have also tried select count(*) from oracle_test.xxxx.xxxx.table1.
When I retype the password in the Linked Server Properties, it just run forever.
Do I need to create a tnsnames.ora on the Windows machine?
Do I need to change the tnsnames.ora on Linux machine?
I'm very new to Oracle.

This forum is dealing with connections from an Oracle database to SQL Server - so the Oracle database is the driving site and this is the way round from your linked server set up.
As you're suing the instant client you might post your issue in the instant client forum:
Instant Client

Auto update stats disabled for a user Database in Sql server

Similar Messages

Maybe you are looking for