Error when creating a database on SQL Server 2012(Virtual Machine)
Hi,
I create a virtual machine on VMWare Workstation 10, then install Windows 7(32bit), then install SQL Server 2012 Enterprise version.
Then I write a Visual C++2008 program and using ADO to connect to the local SQL Server, with the connection string below:
“Provider=sqloledb;Data Source=(local);Integrated Security=SSPI;”
The connect succeed, then I try to create a new SQL Server database by calling:
m_pConnection->Execute(_T(“create database MyDatabase on primary (name = ‘MyDatabase’, filename = ‘E:\\MyDatabase.mdf’)”), NULL, 0);
where E: is a USB drive plugged in.
When running the above statement, I can even see the MyDatabase.mdf file is being created, but finally get an error and error number is 80040e31 when checking the error from m_pConnection, after analyzing the com exception, we find it reports the error as
“IDispath error #3121”. Both errors seem to indicate a “Timeout error”.
Then I try to create the database on the local drive in the virtual machine, as follows:
m_pConnection->Execute(_T(“create database MyDatabase on primary (name = ‘MyDatabase’, filename = ‘C:\\MyDatabase.mdf’)”), NULL, 0);
Then I get error number: 80040e14 from m_pConnection, and com error is “IDispath error #3092”
What is the problem?
Thanks
Hello chcw,
SQL Server 2012 Enterprise doesn't support to install on Windows 7 Opeating System. For detail information, please refer to the article below:
The article shows the operating system requirements for the principal editions of SQL Server 2012:
http://msdn.microsoft.com/en-us/library/ms143506.aspx#top_principal
Here is an article for your reference, please see:
How To Create a SQL Server Database Programmatically by Using ADO.NET and Visual C# .NET:
https://support.microsoft.com/kb/307283/en-us
If you have any feedback on our support, please click
here.
Regards,
Elvis Long
TechNet Community Support
Similar Messages
-
Host: Windows Server 2012 R2 with Hyper-V and RRAS (for Internet over NAT)
VM: Windows Server 2012 R2 with installed Active Directory Domain Services
When I open AD DS configuration window (“promote this server to a domain controller”) many services and programs on my host (include Hyper-V, RRAS & Server Manager) fails with RPC Server unavailable error.Hello Aleksandr,
There wasn't any configuration information, ipconfig /all, network setup, etc. So it's difficult to tell.
More importantly, are you trying to promote the host server? If yes, that is not advised, for one, because it's a Hyper-V server, (not suggested at all), and two, RRAS is installed. RRAS is problematic with any domain controller because it turns it into
a multihomed domain controller.
Active Directory communication fails on multihomed domain controllers
http://support.microsoft.com/kb/272294/
Multihomed DCs (with more than one unteamed NIC or multiple IPs) with DNS, RRAS, iSCSI, Clustering interfaces, management interfaces, backup interfaces, and/or PPPoE adapters - A multihomed DC is not a recommended configuration, however there are ways to
configure a DC with registry mods:
http://blogs.msmvps.com/acefekay/2009/08/17/multihomed-dcs-with-dns-rras-and-or-pppoe-adapters/
7 Reasons not to Make Hyper-V a Domain Controller
http://www.altaro.com/hyper-v/reasons-not-to-make-hyper-v-a-domain-controller/
Domain Controller as Hyper-V host
https://social.technet.microsoft.com/Forums/windowsserver/en-US/4ff14bec-a815-473b-8d2a-33e91e17197b/domain-controller-as-hyperv-host?forum=winserverhyperv
Networking?
I don't know how your networking is setup, whether there are multiple NICs on the host server, if they are teamed, if you have the host interface set to allow the operating system to share administration, or if there are separate interfaces for each. Can
the host OS ping/communicate with the DC virtual machine?
If there are more than one NIC, you have the choice to team the NICs and share the Teamed NICs for the Hyper-V OS and the VMs, or keep them separate where one is devoted for the Hyper-V OS, and one for the VMs.
Hyper-V Server VLAN Network Configuration
https://social.technet.microsoft.com/Forums/windowsserver/en-US/0aa71d2a-ebf9-4a3e-bbf5-94db55339fa2/hyperv-server-vlan-network-configuration?forum=winserverhyperv
Recommendation:
Why not just create another VM DC?
Ace Fekay
MVP, MCT, MCSE 2012, MCITP EA & MCTS Windows 2008/R2, Exchange 2013, 2010 EA & 2007, MCSE & MCSA 2003/2000, MCSA Messaging 2003
Microsoft Certified Trainer
Microsoft MVP - Directory Services
Complete List of Technical Blogs: http://www.delawarecountycomputerconsulting.com/technicalblogs.php
This posting is provided AS-IS with no warranties or guarantees and confers no rights. -
How to create a database in SQL Server Express 2014 to be used with LV Database Toolkit
I use LV Database Toolkit, which by default uses Jet database. Now I want to use SQL database with LV Database Toolkit. I have downloaded and installed "SQL Server 2014 Express with Tools" in my Labview Laptop. Now I want to create a database in SQL Server, because I think it is a requirement for creating a "udl connection file" (*.udl file). Please help me!
Solved!
Go to Solution.I made a database whose path is: C:\Program Files\Microsoft SQL Server\MSSQL12.SQLEXPRESS\MSSQL\DATA\depot1
I tried to make .udl connection file, but when I click on "test connection" with the provider: "OLEDB Provider for Microsoft SQL Server" I get the Error "UDL Connection File Failure" (attached below)
When I tried to make the .udl connection file with the provider "Microsoft SQL native Client 11.0" and when I click on "Test Connection" I get the Error" UDL Native Client_1"& " UDL Native Client_2".
Please help!
Thanks!
Attachments:
UDL Connection File Failure.png 78 KB
UDL with Native Client_1.png 702 KB
UDL with Native Client_2.png 714 KB -
Error when using Oracle Migration WorkBench (Sql Server 2k to Oracle 8i)
I'm trying to migrate a Sql Server 2k database to an Oracle 8i schema using OMWB. After using BCP to collect metadata information on the source database, I tried to capture the source data model and got a "Capture aborted" message on the progress screen (even though then it appears a dialog window reporting "0 errors and 0 warnings", funny!). Down there is the error log OMWB generated. After reading some posts, I changed some columns of the OMWB dictionary that holds the source database name, but still got the same error. If someone can enlighten me on this toppic, I'd greatly appreciated it.
Here's the error log of OMWB:
** Oracle Migration Workbench
** Production
** ( Build 20050629 )
** OMWB_HOME: D:\Datos\Download\Oracle\Oracle Migration Workbench\omwb
** user language: es
** user region: null
** user timezone:
** file encoding: Cp1252
** java version: 1.4.2_04
** java vendor: Sun Microsystems Inc.
** o.s. arch: x86
** o.s. name: Windows 2000
** o.s. version: 5.0
** Classpath:
..\lib\boot.jar
** Started : Fri Feb 23 17:18:48 GMT-03:00 2007
** Workbench Repository : Oracle8i Enterprise Edition Release 8.1.6.0.0 - Production
With the Partitioning option
JServer Release 8.1.6.0.0 - Production
Repository Connection URL: jdbc:oracle:thin:@ServerCms:1521:sigcewbc
** The following plugins are installed:
** Microsoft Access 2.0/95/97/2000/2002/2003 Plugin, Production Release 10.1.0.4.0
** Microsoft SQLServer 2000 Plugin, Production Release 10.1.0.4.0
** Microsoft SQLServer 6.5 Plugin, Production Release 10.1.0.4.0
** Microsoft SQLServer 7.0 Plugin, Production Release 10.1.0.4.0
** Active Plugin : SQLServer2K
EXCEPTION :SQLServer2KDisconnSourceModelLoad.loadSourceModel(): oracle.mtg.migration.MigrationStopException: java.lang.IndexOutOfBoundsException: Index: 15, Size: 15
** Shutdown : Fri Feb 23 18:00:50 GMT-03:00 2007Duplicate thread
Error when using Oracle Migration WorkBench (Sql Server 2k to Oracle 8i) -
Linked Server to Access Database in SQL Server 2012 is working perfectly.But, All of sudden it is showing SQL Error Code:7303
Unable to connect to the database type that is created with earlier versions type. But the same Linked Server in another SQL Server instance is working perfectly. I am unable to rectify what is the problem please help.All of sudden it is showing SQL Error Code:7303
Error 7303 = "Cannot initialize the data source object of OLE DB provider "%ls" for linked server "%ls"."?
Check the data Provider on the machine, e.g. using ODBC Admin by creating a DSN
Olaf Helper
Hi Olaf Helper,
I don't now how to add a DSN for the Access Database using ODBC Admin. Can you Please help me with that one. as the solution to above problem i Have added a startup parameter -g512 to SQL Server is it effects my existing Assemblies in SQL Server. I am replacing
the startup parameter as -g500 to -g512 here.
Thank you
Regards,
AyubKhan M -
Error in creating Duplicate Database in same server..
Hi,
I am getting following error when creating duplicate database
DB Version=10.2.0.4
$ rman target sys/sys@test nocatalog auxiliary /
Recovery Manager: Release 10.2.0.4.0 - Production on Mon Sep 28 15:13:32 2009
Copyright (c) 1982, 2007, Oracle. All rights reserved.
connected to target database: TEST (DBID=1702666620, not open)
using target database control file instead of recovery catalog
connected to auxiliary database: CLNTEST (not mounted)
RMAN> DUPLICATE TARGET DATABASE TO "CLNTEST";
Starting Duplicate Db at 28-SEP-09
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: sid=156 devtype=DISK
contents of Memory Script:
set until scn 597629461;
set newname for datafile 1 to
"/u01/data_new/clonetest/system01.dbf";
set newname for datafile 2 to
"/u01/data_new/clonetest/undotbs01.dbf";
set newname for datafile 3 to
"/u01/data_new/clonetest/sysaux01.dbf";
set newname for datafile 4 to
"/u01/data_new/clonetest/users01.dbf";
set newname for datafile 5 to
"/u01/data_new/clonetest/example01.dbf";
set newname for datafile 6 to
"/u01/data_new/clonetest/undotbs02.dbf";
set newname for datafile 7 to
"/u01/data_new/clonetest/alweb1.dbf";
set newname for datafile 8 to
"/u01/data_new/clonetest/indx1.dbf";
restore
check readonly
clone database
executing Memory Script
executing command: SET until clause
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
Starting restore at 28-SEP-09
using channel ORA_AUX_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 09/28/2009 15:13:40
RMAN-03015: error occurred in stored script Memory Script
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 8 found to restore
RMAN-06023: no backup or copy of datafile 7 found to restore
RMAN-06023: no backup or copy of datafile 6 found to restore
RMAN-06023: no backup or copy of datafile 5 found to restore
RMAN-06023: no backup or copy of datafile 4 found to restore
RMAN-06023: no backup or copy of datafile 3 found to restore
RMAN-06023: no backup or copy of datafile 2 found to restore
RMAN-06023: no backup or copy of datafile 1 found to restore
RMAN> crosscheck backupset of datafile 1;
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=154 devtype=DISK
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=/u01/rmanbkp/db_prd0akqcnoh_1_1 recid=10 stamp=698769169
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=/u02/data/flash_recovery_area/BINGO/backupset/2009_09_28/o1_mf_nnndf_TAG20090928T151044_5d114x0h_.bkp recid=17 stamp=698771444
Crosschecked 2 objects
RMAN> crosscheck backupset of datafile 2;
using channel ORA_DISK_1
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=/u01/rmanbkp/db_prd0akqcnoh_1_1 recid=10 stamp=698769169
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=/u02/data/flash_recovery_area/BINGO/backupset/2009_09_28/o1_mf_nnndf_TAG20090928T151044_5d114x0h_.bkp recid=17 stamp=698771444
Crosschecked 2 objects
RMAN> crosscheck backupset of datafile 3;
using channel ORA_DISK_1
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=/u01/rmanbkp/db_prd0akqcnoh_1_1 recid=10 stamp=698769169
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=/u02/data/flash_recovery_area/BINGO/backupset/2009_09_28/o1_mf_nnndf_TAG20090928T151044_5d114x0h_.bkp recid=17 stamp=698771444
Crosschecked 2 objects
RMAN> crosscheck backupset of datafile 4;
using channel ORA_DISK_1
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=/u01/rmanbkp/db_prd0akqcnoh_1_1 recid=10 stamp=698769169
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=/u02/data/flash_recovery_area/BINGO/backupset/2009_09_28/o1_mf_nnndf_TAG20090928T151044_5d114x0h_.bkp recid=17 stamp=698771444
Crosschecked 2 objects
RMAN> crosscheck backupset of datafile 5;
using channel ORA_DISK_1
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=/u01/rmanbkp/db_prd0akqcnoh_1_1 recid=10 stamp=698769169
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=/u02/data/flash_recovery_area/BINGO/backupset/2009_09_28/o1_mf_nnndf_TAG20090928T151044_5d114x0h_.bkp recid=17 stamp=698771444
Crosschecked 2 objects
RMAN> crosscheck backupset of datafile 6;
using channel ORA_DISK_1
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=/u01/rmanbkp/db_prd0akqcnoh_1_1 recid=10 stamp=698769169
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=/u02/data/flash_recovery_area/BINGO/backupset/2009_09_28/o1_mf_nnndf_TAG20090928T151044_5d114x0h_.bkp recid=17 stamp=698771444
Crosschecked 2 objects
RMAN> crosscheck backupset of datafile 7;
using channel ORA_DISK_1
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=/u01/rmanbkp/db_prd0akqcnoh_1_1 recid=10 stamp=698769169
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=/u02/data/flash_recovery_area/BINGO/backupset/2009_09_28/o1_mf_nnndf_TAG20090928T151044_5d114x0h_.bkp recid=17 stamp=698771444
Crosschecked 2 objects
Thanks,Hi,
RMAN> show all;
using target database control file instead of recovery catalog
RMAN configuration parameters are:
CONFIGURE RETENTION POLICY TO REDUNDANCY 1; # default
CONFIGURE BACKUP OPTIMIZATION OFF; # default
CONFIGURE DEFAULT DEVICE TYPE TO DISK; # default
CONFIGURE CONTROLFILE AUTOBACKUP OFF; # default
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '%F'; # default
CONFIGURE DEVICE TYPE DISK PARALLELISM 1 BACKUP TYPE TO BACKUPSET; # default
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE MAXSETSIZE TO UNLIMITED; # default
CONFIGURE ENCRYPTION FOR DATABASE OFF; # default
CONFIGURE ENCRYPTION ALGORITHM 'AES128'; # default
CONFIGURE ARCHIVELOG DELETION POLICY TO NONE; # default
CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/oracle/ora10g/product/10.2.0/db_1/dbs/snapcf_TEST.f'; # default
Thanks, -
How to create a database in Sql server management studio
how to create a database in Sql server management studio
One method is to run the SQL statement below from a SSMS query window:
CREATE DATABASE MyDatabase;
You can also right-click on the Databases node in SSMS Object explorer and select New Database.
Dan Guzman, SQL Server MVP, http://www.dbdelta.com -
Hi, I'm Begginer in Entity Framework. Then I'm having some problems.
I created my entities and I give Save Changes. (Ok)
Then, I Tried to Connect with the database through Server Explorer, if I use the instance of the SQL Server Management Studio 2012(PC-PAULO\INSTANCIAPJ) as Server Name, the database doesn't appears but, if I use the the instance (localdb)\v11.0 the dabase
appears.
How to change the save to the SQL Server Management Studio 2012, I don't know where this (localDB)\v11.0 saves.
Help-me Thank you :DHello PauloJos,
The code should be ok and it is really strange that the database is only created into the local database in your machine. I am wondering if it is related with the machine environment, could you please have a try with below demo on your machine which works
on my side and if it is possible, please have a try to run your application on other machines to see if it works:
class Program
static void Main(string[] args)
#region https://social.msdn.microsoft.com/Forums/en-US/00eff3c4-2336-4807-9212-e6f2a6c8812e/entity-framework-doesnt-create-the-database-in-sql-server-management-2012-instead-it-just-creates?forum=adodotnetentityframework
using (CFDbContext db = new CFDbContext())
db.Database.CreateIfNotExists();
#endregion
public class CFDbContext : DbContext
public CFDbContext() : base("UltraFoda3") { }
public DbSet<TestOne> TestOnes { get; set; }
public class TestOne
public int ID { get; set; }
public string Name { get; set; }
Config file is similar:
<?xml version="1.0" encoding="utf-8"?>
<configuration>
<configSections>
<!-- For more information on Entity Framework configuration, visit http://go.microsoft.com/fwlink/?LinkID=237468 -->
<section name="entityFramework" type="System.Data.Entity.Internal.ConfigFile.EntityFrameworkSection, EntityFramework, Version=6.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" requirePermission="false" />
</configSections>
<entityFramework>
<defaultConnectionFactory type="System.Data.Entity.Infrastructure.LocalDbConnectionFactory, EntityFramework">
<parameters>
<parameter value="v11.0" />
</parameters>
</defaultConnectionFactory>
<providers>
<provider invariantName="System.Data.SqlClient" type="System.Data.Entity.SqlServer.SqlProviderServices, EntityFramework.SqlServer" />
</providers>
</entityFramework>
<connectionStrings>
<add name="UltraFoda3" connectionString="Data Source=YourServer;Initial Catalog=UltraFoda3;Integrated Security=True;MultipleActiveResultSets=True" providerName="System.Data.SqlClient" />
</connectionStrings>
</configuration>
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Not able to attach Adventure works Database to SQL server 2012 Management studio
Hello
while i try to attach AdventureWorks2012 database to SQL Server 2012 Management Studio i am getting the following error
Msg 1813, Level 16, State 2, Line 1
Could not open new database 'AdventureWorks2012'. CREATE DATABASE is aborted.
Msg 948, Level 20, State 1, Line 1
The database 'AdventureWorks2012' cannot be opened because it is version 705. This server supports version 662 and earlier. A downgrade path is not supported.
Kindly help me in this regard
Thanks
JoeyHi,
You can use the following query to achieve the version of SQL Server.
Select @@version
As the previous comments, you can either upgrade to SQL Server 2012 or attach the AdventureWorks2008 database in the link which KevinNicholas provided.
Additional information:
How to determine the version and edition of SQL Server and its components
http://support.microsoft.com/kb/321185/en-us
Upgrade to SQL Server 2012 Using the Installation Wizard (Setup)
http://technet.microsoft.com/en-us/library/ms144267.aspx
Thanks.
Tracy Cai
TechNet Community Support -
Is it possible to transfer a database from SQL Server 2012 to SQL Server Express 2012?
Is it possible to transfer a database from SQL Server 2012 to
SQL Server Express 2012? Ideally I would like to backup the database from SQL Server 2012 and restore it on SQL Server Express 2012. Is that possible?Is it possible to transfer a database from SQL Server 2012 to
SQL Server Express 2012? Ideally I would like to backup the database from SQL Server 2012 and restore it on SQL Server Express 2012. Is that possible?
Yes it is possible but database size should not be greater than 10 G as max databse size supported for Express 2012 is 10 G
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
I m using SQL Server 2012 Developer Edition. Even I tried 2012 express and enterprise edition but all
gave same error. I browsed msdn blog. But nothing help me out.
Below is the error log details--
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2061893606
Start time: 2013-10-21 12:58:05
End time: 2013-10-21 13:52:30
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for RS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for DQ: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for FullText: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: CROY-TOSH
Machine processor count: 4
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 0
Installation location: C:\Users\CRoy\Downloads\SQL Server 2012 Developer Edition (x86 and x64) - DVD (English)\x64\setup\
Installation edition: Developer
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: false
AGTSVCACCOUNT: NT Service\SQLSERVERAGENT
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Backup
ASCOLLATION: Latin1_General_CI_AI
ASCONFIGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Config
ASDATADIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Data
ASLOGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: NT Service\MSSQLServerOLAPService
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: CRoy-TOSH\CRoy
ASTEMPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: ROY
CLTRESULTDIR: C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\ResultDir\
CLTSTARTUPTYPE: Manual
CLTSVCACCOUNT: NT Service\SQL Server Distributed Replay Client
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\WorkingDir\
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\ConfigurationFile.ini
CTLRSTARTUPTYPE: Manual
CTLRSVCACCOUNT: NT Service\SQL Server Distributed Replay Controller
CTLRSVCPASSWORD: <empty>
CTLRUSERS: CRoy-TOSH\CRoy
ENABLERANU: false
ENU: true
ERRORREPORTING: true
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, DQ, AS, RS, RS_SHP, RS_SHPWFE, DQC, BIDS, CONN, IS, BC, SDK, BOL, SSMS, ADV_SSMS, DREPLAY_CTLR, DREPLAY_CLT, SNAC_SDK, MDS
FILESTREAMLEVEL: 2
FILESTREAMSHARENAME: MSSQLSERVER
FTSVCACCOUNT: NT Service\MSSQLFDLauncher
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: false
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT Service\MsDtsServer110
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: SharePointFilesOnlyMode
RSSVCACCOUNT: NT Service\ReportServer
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: Latin1_General_CI_AI
SQLSVCACCOUNT: NT Service\MSSQLSERVER
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: CRoy-TOSH\CRoy
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 0
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Passed
Feature: Client Tools Connectivity
Status: Passed
Feature: Client Tools SDK
Status: Passed
Feature: Client Tools Backwards Compatibility
Status: Passed
Feature: Management Tools - Basic
Status: Passed
Feature: SQL Server Data Tools
Status: Passed
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Data Quality Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Master Data Services
Status: Passed
Feature: Distributed Replay Client
Status: Passed
Feature: Distributed Replay Controller
Status: Passed
Feature: Integration Services
Status: Passed
Feature: Data Quality Client
Status: Passed
Feature: Analysis Services
Status: Passed
Feature: Reporting Services - SharePoint
Status: Passed
Feature: Reporting Services Add-in for SharePoint Products
Status: Passed
Feature: SQL Browser
Status: Passed
Feature: Documentation Components
Status: Passed
Feature: SQL Writer
Status: Passed
Feature: SQL Client Connectivity
Status: Passed
Feature: SQL Client Connectivity SDK
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\SystemConfigurationCheck_Report.htmHi,
This 3rd time I followed this link. But nothing new, same error.
Can you please tell me how to do follow, I cannt do the 1st step, how to change the local system to windows level account, vice-versa. It is shown mine as
Server Configuration Manager(Local)
From here I folllowed the steps ---[I cannt insert link/image :-(]
SQL 2008/R2 setup fails with "Wait on the database engine recovery handle failed"
If I right clicked on SQL Server Service, there is no option to change the account.
Hello,
Thanks for your patience,did you tried stesp mentioned in below article
http://blogs.msdn.com/b/sqljourney/archive/2012/03/16/sql-2008-r2-setup-fails-with-quot-wait-on-the-database-engine-recovery-handle-failed-quot.aspx
To resolve it, follow these steps:-
When the installation throws this error, click on OK and allow it to proceed. It will fail for Database Engine, but the SQL Server service should have
been created. Check the Services console.
If the service is present, perform the following steps:-
1. Go to SQL Server Configuration manager, right click on the SQL Server service, and change the service account (if it is local system, give
it a windows level account, and vice-versa). It might throw a WMI error but you will see the account getting updated anyway. If not, then use the Services console. Change the account for SQL Agent as well.
Use this link to change sql server service account
http://technet.microsoft.com/en-us/library/ms345578.aspx
2. Next, try to start the service. It should come online.
3. However, you will not be able to log in to the SQL Server
4. Now stop the service and start it from the command prompt using -m -c -T3608 parameters.
5. Now try logging in to the server using admin connection from sqlcmd (sqlcmd admin:<server name>\<instance name> ...)
6. Once logged in, use the sp_addsrvrolemember '<domain\username>','sysadmin'.
Also add the builtin/administrators to the sysadmin role
7. Now stop the service from the command prompt and start it from SQL Server configuration manager
You should be able to log in to the server now.
Hope this helps someone.
Please revert if it helps or even if it does not
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
When I use framing in SQL Server 2012 express, error occurred
Hello, everyone,
I met a error when I use framing in the SQL Server 2012 Express. Could you help me, thank you!
the query is:
SELECT custid, orderid, orderdate, val,
SUM(val) OVER(PARTITION BY custid
ORDER BY orderdate, orderid
ROWS BETWEEN UNBOUNDED PRECEDING
AND CURRENT ROW) AS runningtotal
FROM Sales.OrderValues;
And the error information is:
Msg 102, Level 15, State 1, Line 4
Incorrect syntax near 'ROWS'.
Thank you!Hello,
If you run that statement on SQL Server 2012 (or later), you won’t receive any errors.
I receive that error message only when I run that statement on SQL Server 2008.
I didn't try with SQL Server 2012 Express though. I tested with a SQL Server 2012 Standard Edition instance with SP1 CU2, and your statement works.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
While installing sql server 2012 with failover clustering I got the following error:
The cluster resource 'SQL Server' could not be brought online. Error: There was a failure to call cluster code from a provider. Exception message: Generic failure. Status code: 5942. Description: The resource failed to come online due to the failure of one
or more provider resources.
The two nodes of the sql server failover have been successfully prepared. The error came while running the advance cluster completion option.
In the clustered events in failover cluster manager the following message is displayed:
Cluster resource 'SQL Network Name (CPCTestSQLClus)' of type 'Network name' in clustered role 'SQL Server (MSSQLSERVER)' failed.
I have done various checking and the issue remained. I tried to start the sqlPlease find below part of the content of the cluster log. I hope this is helpful in resolving the issue:
00000998.000010e8::2013/05/08-20:45:00.233 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Online called for resource SQL Network Name (CPCTestSQLClus)
000005a4.0000050c::2013/05/08-20:45:00.233 INFO [RCM] HandleMonitorReply: ONLINERESOURCE for 'SQL Network Name (CPCTestSQLClus)', gen(6) result 997/0.
000005a4.0000050c::2013/05/08-20:45:00.233 INFO [RCM] Res SQL Network Name (CPCTestSQLClus): OnlineCallIssued -> OnlinePending( StateUnknown )
000005a4.0000050c::2013/05/08-20:45:00.233 INFO [RCM] TransitionToState(SQL Network Name (CPCTestSQLClus)) OnlineCallIssued-->OnlinePending.
00000998.000012f0::2013/05/08-20:45:00.233 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Entering Online thread
000005a4.0000050c::2013/05/08-20:45:00.233 INFO [GEM] Sending 1 messages as a batched GEM message
00000998.000012f0::2013/05/08-20:45:00.233 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Initializing config info
00000998.000012f0::2013/05/08-20:45:00.248 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Skipping initialization of 'Identity' module because netname is not yet created
00000998.000012f0::2013/05/08-20:45:00.248 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Performing actual online of resource.
00000998.000012f0::2013/05/08-20:45:00.248 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Obtaining IP info for resource SQL IP Address 1 (CPCTestSQLClus)
00000998.000012f0::2013/05/08-20:45:00.248 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Using provider SQL IP Address 1 (CPCTestSQLClus), ip address 10.144.166.160, mask 255.255.255.0, prefix length 24
00000998.000012f0::2013/05/08-20:45:00.248 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Resource has 1 IPs
00000998.000012f0::2013/05/08-20:45:00.248 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: IP: Type Ipv4, Address 10.144.166.160:~0~, Prefix 10.144.166.160/24, Online true, Transport \Device\NetBt_If3
00000998.000012f0::2013/05/08-20:45:00.248 INFO [RES] Network Name: Agent: Initializing (082d8ef5-62a8-4fee-acbc-e89b769e9181,Configuration)
00000998.000012f0::2013/05/08-20:45:00.248 INFO [RES] Network Name: Agent: Sending request Netname/InitializeIndirect to NN:Agent
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name: Agent: OnInitialize (082d8ef5-62a8-4fee-acbc-e89b769e9181,Configuration)
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name: Agent: CanModuleBeInitializedImp - Module can be initialized, current state Offline
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name: Agent: Sending Initialize to module NN:082d8ef5-62a8-4fee-acbc-e89b769e9181:Configuration
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name: Agent: Sending request Netname/Initialize to NN:082d8ef5-62a8-4fee-acbc-e89b769e9181:Configuration
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Configuration: Waiting for ongoing slow strand to complete (if any)
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Configuration: Signaling main strand to initialize module
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Configuration: Calling initialize of the configuration implementation
000005a4.00001350::2013/05/08-20:45:00.248 INFO [GEM] Sending 1 messages as a batched GEM message
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Configuration: Setting 'StatusKerberos' in clusdb returned status 0
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Configuration: Creating a New AD NetName (type Singleton)...
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name: Agent: Initializing (082d8ef5-62a8-4fee-acbc-e89b769e9181,AccountAD)
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name: Agent: Sending request Netname/InitializeIndirect to NN:Agent
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name: Agent: OnInitialize (082d8ef5-62a8-4fee-acbc-e89b769e9181,AccountAD)
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name: Agent: CanModuleBeInitializedImp - Module can be initialized, current state Closing
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name: Agent: Sending Initialize to module NN:082d8ef5-62a8-4fee-acbc-e89b769e9181:AccountAD
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name: Agent: Sending request Netname/Initialize to NN:082d8ef5-62a8-4fee-acbc-e89b769e9181:AccountAD
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: AccountAD: Waiting for ongoing slow strand to complete (if any)
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: AccountAD: Signaling main strand to initialize module
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: AccountAD: Initializing Name: CPCTestSQLClus, NetbiosName: CPCTESTSQLCLUS, Type: Singleton, Created: false
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name: [NNLIB] GetCreatingDC - name CPCTestSQLClus, lookup flags = 1
00000998.000010e8::2013/05/08-20:45:00.452 INFO [RES] Network Name: [NNLIB] GetDCWithFlags - using DC
\\MY01DC03.Domain.net, domain name Domain.net, IsReadOnly 0, Object exists 0
00000998.000010e8::2013/05/08-20:45:00.452 INFO [RES] Network Name: [NN] Setting crypto access members for encrypt. New container = false.
000005a4.00001350::2013/05/08-20:45:00.452 INFO [GEM] Sending 1 messages as a batched GEM message
00000998.000010e8::2013/05/08-20:45:00.452 INFO [RES] Network Name: Agent: Sending request Netname/LastDcChange to NN:082d8ef5-62a8-4fee-acbc-e89b769e9181:Configuration
00000998.0000075c::2013/05/08-20:45:00.452 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Configuration: LastDc Changed, configOnly: 1
000005a4.00001350::2013/05/08-20:45:00.452 INFO [GEM] Sending 1 messages as a batched GEM message
00000998.0000075c::2013/05/08-20:45:00.468 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Configuration: Setting last DC in clusdb returned status 0
00000998.0000075c::2013/05/08-20:45:00.468 INFO [RES] Network Name: [NN] got sync reply: 0
00000998.000010e8::2013/05/08-20:45:00.468 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: AccountAD: LastDc Changed (configOnly true), result: 0
00000998.000010e8::2013/05/08-20:45:00.468 INFO [RES] Network Name: Agent: Sending request Netname/PasswordChange to NN:082d8ef5-62a8-4fee-acbc-e89b769e9181:Configuration
00000998.0000075c::2013/05/08-20:45:00.468 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Configuration: Password Changed, configOnly: 1
000005a4.00001350::2013/05/08-20:45:00.468 INFO [GEM] Sending 1 messages as a batched GEM message
00000998.0000075c::2013/05/08-20:45:00.468 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Configuration: Setting password in clusdb returned status 0
00000998.0000075c::2013/05/08-20:45:00.468 INFO [RES] Network Name: [NN] got sync reply: 0
00000998.000010e8::2013/05/08-20:45:00.468 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: AccountAD: PasswordChanged (configOnly true), result: 0
00000998.000010e8::2013/05/08-20:45:00.468 INFO [RES] Network Name: [NN] Setting crypto access members for decrypt. New container = false.
00000998.00000ab8::2013/05/08-20:45:00.636 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Getting Read/Write private properties
00000998.00000ab8::2013/05/08-20:45:00.647 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Getting Read only private properties
00000998.0000075c::2013/05/08-20:45:00.784 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Getting Read/Write private properties
00000998.00000ab8::2013/05/08-20:45:00.815 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Getting Read only private properties
00000998.00000ab8::2013/05/08-20:45:00.815 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Getting Read/Write private properties
00000998.00000ab8::2013/05/08-20:45:00.830 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Getting Read only private properties
00000998.00000ab8::2013/05/08-20:45:00.830 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Getting Read/Write private properties
00000998.00000ab8::2013/05/08-20:45:00.830 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Getting Read only private properties
00000998.000010e8::2013/05/08-20:45:00.924 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: AccountAD: OU name for VCO is OU=NewComputers,OU=WORKSTATIONS,DC=Domain,DC=net
00000998.000010e8::2013/05/08-20:45:00.924 INFO [RES] Network Name: Agent: Sending request Netname/GetToken to NN:c03fb105-9a50-4d00-8bee-afaf693f7efc:Identity
00000998.00000ab8::2013/05/08-20:45:00.924 INFO [RES] Network Name <Cluster Name>: Identity: Module is not yet initialized. Trying to obtain a new token.
00000998.0000075c::2013/05/08-20:45:00.924 INFO [RES] Network Name <Cluster Name>: Identity: Obtaining new token
00000998.0000075c::2013/05/08-20:45:00.924 INFO [RES] Network Name: [NN] Setting crypto access members for decrypt. New container = false.
00000998.0000075c::2013/05/08-20:45:00.924 INFO [RES] Network Name: [NNLIB] Priming local KDC cache to
\\MY01DC02.Domain.net for domain Domain.net
00000998.0000075c::2013/05/08-20:45:00.924 INFO [RES] Network Name: [NNLIB] PopulateKerbKDCLookupCache - DC flags 0
00000998.0000075c::2013/05/08-20:45:00.940 INFO [RES] Network Name: [NNLIB] LsaCallAuthenticationPackage success with a request of size 94, result size 0 (status: 0, subStatus: 0)
00000998.0000075c::2013/05/08-20:45:00.940 INFO [RES] Network Name: [NNLIB] Priming local KDC cache to
\\MY01DC02.Domain.net for domain label Domain
00000998.0000075c::2013/05/08-20:45:00.940 INFO [RES] Network Name: [NNLIB] LsaCallAuthenticationPackage success with a request of size 86, result size 0 (status: 0, subStatus: 0)
00000998.0000075c::2013/05/08-20:45:01.018 WARN [RES] Network Name: [NNLIB] LogonUserEx fails for user CPCTestWinClus$: 1326 (useSecondaryPassword: 0)
00000998.0000075c::2013/05/08-20:45:01.096 WARN [RES] Network Name: [NNLIB] LogonUserEx fails for user CPCTestWinClus$: 1326 (useSecondaryPassword: 1)
00000998.0000075c::2013/05/08-20:45:01.096 INFO [RES] Network Name: [NNLIB] Logon failed for user CPCTestWinClus$ (Error 1326), DC
\\MY01DC02.Domain.net, domain Domain.net
00000998.0000075c::2013/05/08-20:45:01.096 INFO [RES] Network Name <Cluster Name>: Identity: Obtaining Windows Token for Name: CPCTestWinClus, SamName: CPCTestWinClus$, Type: Singleton, Result: 1326, LastDC:
\\MY01DC02.Domain.net
00000998.0000075c::2013/05/08-20:45:01.096 INFO [RES] Network Name <Cluster Name>: Identity: Slow Operation, FinishWithReply: 1326
00000998.0000075c::2013/05/08-20:45:01.096 INFO [RES] Network Name <Cluster Name>: Identity: InternalReplyHandler with event: 1326
00000998.0000075c::2013/05/08-20:45:01.096 INFO [RES] Network Name <Cluster Name>: Identity: End of Slow Operation, state: Error/Idle, prevWorkState: Idle
00000998.00000ab8::2013/05/08-20:45:01.096 WARN [RES] Network Name <Cluster Name>: Identity: Get Token Request, currently doesnt have a token!
00000998.00000ab8::2013/05/08-20:45:01.096 INFO [RES] Network Name: [NN] got sync reply: 0
00000998.000010e8::2013/05/08-20:45:01.096 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: AccountAD: End of Slow Operation, state: Initializing/Writing, prevWorkState: Writing
00000998.000010e8::2013/05/08-20:45:01.096 WARN [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: AccountAD: Slow operation has exception ERROR_INVALID_HANDLE(6)' because of '::ImpersonateLoggedOnUser( GetToken() )'
00000998.000010e8::2013/05/08-20:45:01.096 INFO [RES] Network Name: Agent: OnInitializeReply, Failure on (082d8ef5-62a8-4fee-acbc-e89b769e9181,AccountAD): 6
00000998.000010e8::2013/05/08-20:45:01.096 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Configuration: InitializeReplyCreation of NetName (type Singleton), result: 6, IsCanceled: false
000005a4.00000cd8::2013/05/08-20:45:01.096 INFO [GEM] Sending 1 messages as a batched GEM message
00000998.00000ab8::2013/05/08-20:45:01.096 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Getting Read/Write private properties
00000998.000010e8::2013/05/08-20:45:01.096 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Configuration: Setting 'StatusKerberos' in clusdb returned status 0
00000998.000010e8::2013/05/08-20:45:01.096 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Configuration: Deleting ResourceData, CreatingDC, ObjectGUID for a newly created netname from cluster database
000005a4.00000cd8::2013/05/08-20:45:01.096 INFO [GEM] Sending 1 messages as a batched GEM message
000005a4.00000cd8::2013/05/08-20:45:01.112 INFO [GEM] Sending 1 messages as a batched GEM message
00000998.00000ab8::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Getting Read only private properties
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: OnInitializeReply, Failure on (082d8ef5-62a8-4fee-acbc-e89b769e9181,Configuration): 6
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: SyncReplyHandler Configuration, result: 6
00000998.000012f0::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: PerformOnline - Initialization of Configuration module finished with result: 6
00000998.000012f0::2013/05/08-20:45:01.112 ERR [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Online thread Failed: ERROR_SUCCESS(0)' because of 'Initializing netname configuration for SQL Network Name (CPCTestSQLClus) failed with
error 6.'
00000998.000012f0::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: All resources offline. Cleaning up.
00000998.000012f0::2013/05/08-20:45:01.112 ERR [RHS] Online for resource SQL Network Name (CPCTestSQLClus) failed.
000005a4.0000050c::2013/05/08-20:45:01.112 WARN [RCM] HandleMonitorReply: ONLINERESOURCE for 'SQL Network Name (CPCTestSQLClus)', gen(6) result 5018/0.
000005a4.0000050c::2013/05/08-20:45:01.112 INFO [RCM] Res SQL Network Name (CPCTestSQLClus): OnlinePending -> ProcessingFailure( StateUnknown )
000005a4.0000050c::2013/05/08-20:45:01.112 INFO [RCM] TransitionToState(SQL Network Name (CPCTestSQLClus)) OnlinePending-->ProcessingFailure.
000005a4.0000050c::2013/05/08-20:45:01.112 ERR [RCM] rcm::RcmResource::HandleFailure: (SQL Network Name (CPCTestSQLClus))
000005a4.0000050c::2013/05/08-20:45:01.112 INFO [RCM] resource SQL Network Name (CPCTestSQLClus): failure count: 6, restartAction: 2 persistentState: 1.
000005a4.00000cd8::2013/05/08-20:45:01.112 INFO [GEM] Sending 1 messages as a batched GEM message
000005a4.0000050c::2013/05/08-20:45:01.112 INFO [RCM] Greater than restartPeriod time has elapsed since first failure of SQL Network Name (CPCTestSQLClus), resetting failureTime and failureCount.
000005a4.0000050c::2013/05/08-20:45:01.112 INFO [RCM] Will queue immediate restart (500 milliseconds) of SQL Network Name (CPCTestSQLClus) after terminate is complete.
000005a4.0000050c::2013/05/08-20:45:01.112 INFO [RCM] Res SQL Network Name (CPCTestSQLClus): ProcessingFailure -> WaitingToTerminate( DelayRestartingResource )
000005a4.0000050c::2013/05/08-20:45:01.112 INFO [RCM] TransitionToState(SQL Network Name (CPCTestSQLClus)) ProcessingFailure-->[WaitingToTerminate to DelayRestartingResource].
000005a4.0000050c::2013/05/08-20:45:01.112 INFO [RCM] Res SQL Network Name (CPCTestSQLClus): [WaitingToTerminate to DelayRestartingResource] -> Terminating( DelayRestartingResource )
000005a4.0000050c::2013/05/08-20:45:01.112 INFO [RCM] TransitionToState(SQL Network Name (CPCTestSQLClus)) [WaitingToTerminate to DelayRestartingResource]-->[Terminating to DelayRestartingResource].
00000998.00000ab8::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Terminate called for resource SQL Network Name (CPCTestSQLClus)
00000998.00000ab8::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Entering Offline thread
00000998.00000ab8::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Performing actual offline of resource.
00000998.00000ab8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: Closing (082d8ef5-62a8-4fee-acbc-e89b769e9181,AdminShare)
00000998.00000ab8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: Sending request Netname/CloseIndirect to NN:Agent
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: OnClose (082d8ef5-62a8-4fee-acbc-e89b769e9181,AdminShare)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: Sending request Netname/Close to NN:082d8ef5-62a8-4fee-acbc-e89b769e9181:AdminShare
00000998.000010e8::2013/05/08-20:45:01.112 ERR [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: AdminShare: OnCloseBase, Error Already Closing, previous state: Closing/Ending
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: OnCloseReply (082d8ef5-62a8-4fee-acbc-e89b769e9181,AdminShare) result: 1904
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: SyncReplyHandler Configuration, result: 1904
00000998.00000ab8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: Closing (082d8ef5-62a8-4fee-acbc-e89b769e9181,Configuration)
00000998.00000ab8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: Sending request Netname/CloseIndirect to NN:Agent
000005a4.00000cd8::2013/05/08-20:45:01.112 INFO [RCM-rbtr] giving default token to group SQL Server (MSSQLSERVER)
000005a4.00000cd8::2013/05/08-20:45:01.112 INFO [RCM-rbtr] giving default token to group SQL Server (MSSQLSERVER)
000005a4.00000cd8::2013/05/08-20:45:01.112 INFO [RCM-rbtr] giving default token to group SQL Server (MSSQLSERVER)
000005a4.00000cd8::2013/05/08-20:45:01.112 INFO [RCM-rbtr] giving default token to group SQL Server (MSSQLSERVER)
00000998.0000075c::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: OnClose (082d8ef5-62a8-4fee-acbc-e89b769e9181,Configuration)
00000998.0000075c::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: Sending request Netname/Close to NN:082d8ef5-62a8-4fee-acbc-e89b769e9181:Configuration
00000998.0000075c::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Configuration: Canceling work, state: Closing/Idle
00000998.0000075c::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Configuration: OnCloseBase, previous state: Initializing/Idle
00000998.0000075c::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Configuration: Closing... (PreviousState: Initializing, Created: false, Type: Singleton)
00000998.0000075c::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: Closing (082d8ef5-62a8-4fee-acbc-e89b769e9181,AccountAD)
00000998.0000075c::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: Sending request Netname/CloseIndirect to NN:Agent
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: OnClose (082d8ef5-62a8-4fee-acbc-e89b769e9181,AccountAD)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: Sending request Netname/Close to NN:082d8ef5-62a8-4fee-acbc-e89b769e9181:AccountAD
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: AccountAD: Canceling work, state: Closing/Idle
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: AccountAD: OnCloseBase, previous state: Initializing/Idle
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: OnCloseReply (082d8ef5-62a8-4fee-acbc-e89b769e9181,AccountAD) result: 0
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Configuration: Finish Closing NetName (type Singleton) Module AccountAD, result 0, remaining... 0 (0)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: -- listing 3 instances ---------------------------------------------
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: --- 7 modules for instance: 082d8ef5-62a8-4fee-acbc-e89b769e9181:
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: Configuration with states: Offline/Ending (BeingBorn)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: AccountAD with states: Closing/Ending (BeingBorn)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: Client with states: Offline/Idle (BeingBorn)
00000998.0000075c::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Configuration: Closed
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: Identity with states: Offline/Idle (BeingBorn)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: Dns with states: Offline/Idle (BeingBorn)
00000998.0000075c::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: OnCloseReply (082d8ef5-62a8-4fee-acbc-e89b769e9181,Configuration) result: 0
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: Netbios with states: Offline/Idle (BeingBorn)
00000998.0000075c::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: SyncReplyHandler Configuration, result: 0
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: AdminShare with states: Closing/Ending (BeingBorn)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: --- 7 modules for instance: 43dec41b-661c-42a8-ae23-b635d7ab11f5:
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: Configuration with states: Offline/Ending (BeingBorn)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: AccountAD with states: Closing/Ending (BeingBorn)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: Client with states: Offline/Idle (BeingBorn)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: Identity with states: Offline/Idle (BeingBorn)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: Dns with states: Offline/Idle (BeingBorn)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: Netbios with states: Offline/Idle (BeingBorn)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: AdminShare with states: Closing/Ending (BeingBorn)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: --- 7 modules for instance: c03fb105-9a50-4d00-8bee-afaf693f7efc:
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: Configuration with states: Initialized/Idle (Alive)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: AccountAD with states: Initializing/Idle (BeingBorn)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: Client with states: Initialized/Idle (Alive)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: Identity with states: Error/Idle (BeingBorn)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: Dns with states: Initialized/Idle (Alive)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: Netbios with states: Initialized/Idle (Alive)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: AdminShare with states: Initialized/Idle (BeingBorn)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: -- 0 Zombie modules
000005a4.0000050c::2013/05/08-20:45:01.112 INFO [RCM] HandleMonitorReply: TERMINATERESOURCE for 'SQL Network Name (CPCTestSQLClus)', gen(7) result 0/0.
000005a4.0000050c::2013/05/08-20:45:01.112 INFO [RCM] Res SQL Network Name (CPCTestSQLClus): [Terminating to DelayRestartingResource] -> DelayRestartingResource( StateUnknown )
000005a4.0000050c::2013/05/08-20:45:01.112 INFO [RCM] TransitionToState(SQL Network Name (CPCTestSQLClus)) [Terminating to DelayRestartingResource]-->DelayRestartingResource.
000005a4.0000050c::2013/05/08-20:45:01.112 WARN [RCM] Queueing immediate delay restart of resource SQL Network Name (CPCTestSQLClus) in 500 ms.
000005a4.00001248::2013/05/08-20:45:01.112 INFO [RCM-rbtr] giving default token to group SQL Server (MSSQLSERVER)
000005a4.00001248::2013/05/08-20:45:01.112 INFO [RCM-rbtr] giving default token to group SQL Server (MSSQLSERVER)
000005a4.00001248::2013/05/08-20:45:01.112 INFO [RCM-rbtr] giving default token to group SQL Server (MSSQLSERVER)
000005a4.00001248::2013/05/08-20:45:01.112 INFO [RCM-rbtr] giving default token to group SQL Server (MSSQLSERVER)
000005a4.00001350::2013/05/08-20:45:01.112 INFO [GEM] Sending 1 messages as a batched GEM message
00000998.00000b78::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Getting Read/Write private properties
000005a4.00001350::2013/05/08-20:45:01.112 INFO [GEM] Sending 1 messages as a batched GEM message
00000998.00000b78::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Getting Read only private properties
00000998.00000b78::2013/05/08-20:45:01.127 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Getting Read/Write private properties
000005a4.00001350::2013/05/08-20:45:01.127 INFO [GEM] Sending 1 messages as a batched GEM message
00000998.00000b78::2013/05/08-20:45:01.127 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Getting Read only private properties
000005a4.00001350::2013/05/08-20:45:01.127 INFO [GEM] Sending 1 messages as a batched GEM message
000005a4.00001350::2013/05/08-20:45:01.127 INFO [GEM] Sending 1 messages as a batched GEM message
000005a4.00001350::2013/05/08-20:45:01.143 INFO [GEM] Sending 1 messages as a batched GEM message
00000998.00000b78::2013/05/08-20:45:01.252 INFO [RES] Network Name: Agent: Sending request Netname/RecheckConfig to NN:c03fb105-9a50-4d00-8bee-afaf693f7efc:Netbios
00000998.00000ab8::2013/05/08-20:45:01.252 INFO [RES] Network Name <Cluster Name>: Netbios: Slow Operation, FinishWithReply: 0
00000998.00000ab8::2013/05/08-20:45:01.252 INFO [RES] Network Name: [NN] got sync reply: 0
00000998.00000ab8::2013/05/08-20:45:01.252 INFO [RES] Network Name <Cluster Name>: Netbios: End of Slow Operation, state: Initialized/Idle, prevWorkState: Idle -
I was running SQL Server 2012 in Win 7 64 bit OS. Some how I found SQLSERVER server is not running and I was not able to run the service. Then I tried to unisntall and install again. And I found that some of the SQL Server
features got failed, like: Reporting Services - Native, Database Engine Services, Data Quality Services, Full-Text and Semantic Extractions for Search and SQL Server Replication. I checked the Summary.txt
file from location C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log. It thsi logs referes to another log file location like:
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 1639
Component log file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140127_151409\sql_engine_core_inst_Cpu64_1.log
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=sql_engine_core_inst.msi%400x162A16FE%400x1639
I did unisntall/install multipel times. But fhw to fix the issue that saying in sql_engine_core_inst_Cpu64_1.log file.:
=== Verbose logging started: 1/27/2014 15:45:04 Build type: SHIP UNICODE 5.00.7601.00 Calling process: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\SQLServer2012\x64\ScenarioEngine.exe ===
MSI (c) (C4:BC) [15:45:04:321]: Resetting cached policy values
MSI (c) (C4:BC) [15:45:04:321]: Machine policy value 'Debug' is 0
MSI (c) (C4:BC) [15:45:04:321]: ******* RunEngine:
******* Product: E:\Software\SQL Full Installation\x64\setup\sql_engine_core_inst_msi\sql_engine_core_inst.msi
******* Action:
******* CommandLine: **********
MSI (c) (C4:BC) [15:45:04:322]: Client-side and UI is none or basic: Running entire install on the server.
MSI (c) (C4:BC) [15:45:04:322]: Grabbed execution mutex.
MSI (c) (C4:BC) [15:45:04:323]: Cloaking enabled.
MSI (c) (C4:BC) [15:45:04:323]: Attempting to enable all disabled privileges before calling Install on Server
MSI (c) (C4:BC) [15:45:04:323]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (38:8C) [15:45:04:327]: Running installation inside multi-package transaction E:\Software\SQL Full Installation\x64\setup\sql_engine_core_inst_msi\sql_engine_core_inst.msi
MSI (s) (38:8C) [15:45:04:327]: Grabbed execution mutex.
MSI (s) (38:A0) [15:45:04:327]: Resetting cached policy values
MSI (s) (38:A0) [15:45:04:327]: Machine policy value 'Debug' is 0
MSI (s) (38:A0) [15:45:04:327]: ******* RunEngine:
******* Product: E:\Software\SQL Full Installation\x64\setup\sql_engine_core_inst_msi\sql_engine_core_inst.msi
******* Action:
******* CommandLine: **********
MSI (s) (38:A0) [15:45:04:452]: Machine policy value 'TransformsSecure' is 0
MSI (s) (38:A0) [15:45:04:452]: User policy value 'TransformsAtSource' is 0
MSI (s) (38:A0) [15:45:04:475]: Machine policy value 'DisableUserInstalls' is 0
MSI (s) (38:A0) [15:45:04:475]: Specified instance {18B2A97C-92C3-4AC7-BE72-F823E0BC895B} via transform :InstID01.mst;:InstName02.mst is already installed. MSINEWINSTANCE requires a new instance that is not installed.
MSI (s) (38:A0) [15:45:04:475]: MainEngineThread is returning 1639
MSI (s) (38:8C) [15:45:04:477]: User policy value 'DisableRollback' is 0
MSI (s) (38:8C) [15:45:04:477]: Machine policy value 'DisableRollback' is 0
MSI (s) (38:8C) [15:45:04:477]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (38:8C) [15:45:04:478]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
MSI (s) (38:8C) [15:45:04:478]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
MSI (s) (38:8C) [15:45:04:478]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (38:8C) [15:45:04:478]: Restoring environment variables
MSI (c) (C4:BC) [15:45:04:481]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (C4:BC) [15:45:04:481]: MainEngineThread is returning 1639
=== Verbose logging stopped: 1/27/2014 15:45:04 ===
Please advice. I searched many places and did not get actual solution that will resolve my case.
Nusrat AkhterHi Nusrat Akhter,
According to your description, when installing the first install failed, and it looks like the instance did not uninstall completely. To solve the issue I recommend you changed the instance name in re-installing SQL Server, and check if it can work fine.
There is a similar issue that the SQL engine will not start, and there is no method of uninstalling either it, or any of the components etc. You can review the following post.
https://connect.microsoft.com/SQLServer/feedback/details/710892/sql-server-2012-rc0-install-fails-citing-invalid-drivers
Thanks,
Sofiya Li
Sofiya Li
TechNet Community Support -
Create Assembly fails in SQL Server 2012 SP1 if an assembly is built with Platform Target as AnyCPU
Environment:
Windows 2008 R2.
SQL Server 2012 SP1 64 bit.
I have a .NET assembly built using .NET Framework 4.0 with Platform Target set to AnyCPU and Unsafe options. The assembly has dependency on few other assemblies and has unmanaged code also. When I run CREATE ASSEMBLY for this assembly I get the following
error message.
Assembly '<assembly name>' could
not be installed because existing policy would keep it
from being used.
However if I change the compile option to x64 instead of AnyCPU, I can successfully create the assembly. So my question : Does SQL Server 2012 64 bit requires assemblies that have Unmanaged code or makes calls to native libraries need to be built using x64
bit option? AnyCPU should not be used?
Thanks in AdvanceHello,
The default setting of a Visual Studio project is "Any CPU".SO on a 64 bit system this means the program will automatically run as a 64 bit application and on a 32 bit system it will automatically run as a 32 bit application. But if you have a dependency
assembly which is either x86 or x64, technically your project is therefore not "Any CPU" compatible.
According to BOL: If the the assembly is 100% type safe which there is no dependencies on native code or COM objects and that there is no 'unsafe' code, it is possible to take the .NET executable
that you run on your 32-bit machine and move it to the 64-bit system and have it run successfully.
In your case, the issue may caused by the unsafe code and you should spcify the platform target to X64 to make is run on the 64 bit system.
Reference:http://www.hanselman.com/blog/BackToBasics32bitAnd64bitConfusionAroundX86AndX64AndTheNETFrameworkAndCLR.aspx
Regards,
Fanny Liu
If you have any feedback on our support, please click here.
Fanny Liu
TechNet Community Support
Maybe you are looking for
-
Nomad Jukebox Zen Xtra 30GB mp3 player - Windows Vista
I no longer have the disc that came with my player and can't seem to find drivers to get my PC to recognize the player. Downloads seem to be for older operating systems maybe because the player is so old. When I try to downlod them I get errors. Not
-
Problem when creating planned order with MRP run
Hello, I create a material with a fix reorder point, MRP type VB. When I run MRP with MD03 on this material I have several problems : - planned order is created with an opening date in the past, so I have error 'Opening date in the past' in MD04. How
-
Pre-defined program in ECC 6.0
Hi Experts, I have a issue that can resolve by u guys, Please provide the pre-defined program in ECC 6.0 that can stored the program code and all the includes in a program for the given path. Advance Thanks. u r answer will be given points.
-
Downgrade ios 6.1.4 to 6.1.2
Heey, Ik wil graag mijn IOS 6.1.4 downgrade op mijn iPhone 5 naar IOS 6.1.2. Is dit mogelijk? Zo ja, hoe? Bedankt!
-
Creating Objects with the Shape Tools | Learn Illustrator CS6 | Adobe TV
In this video you'll see how to use Illustrator's shape tools to create primitive shapes that you can use as the basis for objects. You'll also learn how to use the Shape Builder tool to combine shapes. http://adobe.ly/JXWnRj