AutoConfig: ERROR: Could not retrieve mount point for product top

when running autoconfig i got the below error for (R12)
there is no errors are reported in autoconfig log file
I Changed The directory of the PROD TOPs that are custom from 12.0.0 to 1.1.1. Auto Config overlays the changes back to 12.0.0. The Auto Config code can not find the Custom Top because it is looking to match up the entries in topfile.txt with 12.0.0 added to the end with the 1.1.1 which does not exist.
Please suggest

Hi,
Why you want to make this change? Did you confirm this change wiht oracle support(if its prod i stongly suggest confirm your issue wiht oracle suport=
Please also see:
adcfg fails for apps tier
http://kr.forums.oracle.com/forums/thread.jspa?messageID=3359572
Regard
Helios

Similar Messages

Log shipping Could not retrieve backup settings for primary ID

hello,
I implemented log shipping in our server the process of implementation went fine but when I view job history I found
Message
2014-06-11 12:00:01.53   *** Error: Could not retrieve backup settings for primary ID '99817903-626e-4380-bcf1-c09ca6f48b6d'.(Microsoft.SqlServer.Management.LogShipping) ***
2014-06-11 12:00:01.53   *** Error: The specified agent_id 99817903-626E-4380-BCF1-C09CA6F48B6D or agent_type 0 do not form a valid pair for log shipping monitoring processing.(.Net SqlClient Data Provider) ***
2014-06-11 12:00:01.53   *** Error: Could not log history/error message.(Microsoft.SqlServer.Management.LogShipping) ***
2014-06-11 12:00:01.53   *** Error: The specified agent_id 99817903-626E-4380-BCF1-C09CA6F48B6D or agent_type 0 do not form a valid pair for log shipping monitoring processing.(.Net SqlClient Data Provider) ***
2014-06-11 12:00:01.53   *** Error: Could not cleanup history.(Microsoft.SqlServer.Management.LogShipping) ***
2014-06-11 12:00:01.53   *** Error: The specified agent_id 99817903-626E-4380-BCF1-C09CA6F48B6D or agent_type 0 do not form a valid pair for log shipping monitoring processing.(.Net SqlClient Data Provider) ***
2014-06-11 12:00:01.53   ----- END OF TRANSACTION LOG BACKUP   -----
Exit Status: 1 (Error)
also I check for database ID using select * from msdb..log_shipping_primary_databases
your help is appreciated.
Please Mark it as Answered if it answered your question
OR mark it as Helpful if it help you to solve your problem
Elmozamil Elamir Hamid
MCSE Data Platform
MCITP: SQL Server 2008 Administration/Development
MCSA SQL Server 2012
MCTS: SQL Server Administration/Development
MyBlog

Thank you all for your contribution.
After testing and debugging I found that when they move their database from one server (server2) to another server (server1) the database still using the old name (server2) which you can findusing this script:
SELECT @@SERVERNAME
so the replication can't retrieve information, unfortunately for me it is difficult to rename the server because it sis development server so they need to make analysis about side effects if we renamed it.
Please Mark it as Answered if it answered your question
OR mark it as Helpful if it help you to solve your problem
Elmozamil Elamir Hamid
MCSE Data Platform
MCITP: SQL Server 2008 Administration/Development
MCSA SQL Server 2012
MCTS: SQL Server Administration/Development
MyBlog

Logon Error:Could not retrieve the source file for Port "Main"

Hi All,
We have a port which is blocked due to structural exceptions.When i try to connect to the Exceptions folder
"Main[Exceptions]" the import manager throws an error "Logon Error:Could not retrieve the source file for port "Main".
Any help greatly appreciated

Hi ,
Thanks for your reply.
This is what I see in the log file in the exceptions folder
These are the line I see almost to the end of the log file before they complete field mappings,value addings
          <Failure ts="2008/07/22 00:10:48.326 GMT" tid="1286" entry-no="9114" operation="Create lookups" rc="0x80000001">Illegal value for parameter</Failure>
          <Timer ts="2008/07/22 00:10:48.327 GMT" tid="1286" entry-no="9115" name="Import Lookup" total="0.040819">1</Timer>
          <Trace ts="2008/07/22 00:10:48.327 GMT" tid="1286" entry-no="9116">Import of Lookup Failed.</Trace>
But when I open the same source xml file after downloading to my local folder from Exceptions Structural folder and load manually using IM i get the status as "Ready to import".
Any Help greatly appreciated

Error: Could not find a match for... ?

Hi,
I am trying to compile some code using Studio 10/11 which appears to compile cleanly using a bunch of different C++ compilers (xlC, aCC, VC, g++) but is failing using the C++ compiler in both Studio 10 and Studio 11 with:
"test.cpp", line 18: Error: Could not find a match for MKGeomT::getDistanceSquared<MKGeomT::_DIM, MKGeomT::_TYPE>(const MKGeomT::Segment<MKT::Dim2, MKT::Double>&, const MKGeomT::Point<MKT::Dim2, MKT::Double>&, MKGeomT::Point<MKT::Dim2, MKT::Double>*, double*).
"test.cpp", line 23: Error: Could not find a match for MKGeomT::getDistanceSquared<MKGeomT::_DIM, MKGeomT::_TYPE>(const MKGeomT::Segment<MKT::Dim3, MKT::Double>&, const MKGeomT::Point<MKT::Dim3, MKT::Double>&, MKGeomT::Point<MKT::Dim3, MKT::Double>*, double*).
Any ideas on how to get this to compile would be appreciated.
test.cpp:
/opt/SUNWspro/bin/CC -library=stlport4 -c test.cpp
#include "all.h"
namespace MKGeomT
template < class DIM, class TYPE >
double getDistanceSquared(Segment < DIM, TYPE > const &segment,
Point < DIM, TYPE > const &querypt,
Point < DIM, TYPE > *closestpoint,
double *param)
{ return 0.0; }
template double getDistanceSquared < MKT::Dim2 > (Segment2 const &segment,
Point2 const &querypt,
Point2 *closestpoint,
double *param);
template double getDistanceSquared < MKT::Dim3 > (Segment3 const &segment,
Point3 const &querypt,
Point3 *closestpoint,
double *param);
all.h:
// a.h
namespace MKGeomT
template < class DIM, class TYPE > class Point;
template < class DIM, class TYPE > class Segment;
template < class DIM, class TYPE >
double getDistanceSquared(Segment < DIM, TYPE > const &segment,
Point < DIM, TYPE > const &point,
Point < DIM, TYPE > closestpoint /= 0*/,
double *param = 0);
template < class DIM, class TYPE >
inline double getDistance(Segment < DIM, TYPE > const &segment,
Point < DIM, TYPE > const &point,
Point < DIM, TYPE > *closestpoint = 0)
return 0.0;
// b.h
namespace MKT
class Dim2 { public: enum { NUM_DIM = 2 }; };
class Dim3 { public: enum { NUM_DIM = 3 }; };
class Float { public: typedef float Stor_t; typedef double Calc_t; };
class Double { public: typedef double Stor_t; typedef double Calc_t; };
} // end of namespace MKT
// c.h
using MKT::Dim2;
using MKT::Dim3;
using MKT::Double;
namespace MKGeomT
template < class DIM, class TYPE >
class PointBase
template < class DIM, class TYPE > class Point;
#if 1
template < class _TYPE >
class Point < Dim2, TYPE > : public PointBase < Dim2, TYPE >
template < class _TYPE >
class Point < Dim3, TYPE > : public PointBase < Dim3, TYPE >
#endif
typedef Point < Dim2, Double > Point2;
typedef Point < Dim3, Double > Point3;
} // end of namespace MKGeomT
// d.h
namespace MKGeomT
/*! The Segment is a geometry class storing a segment in 3-D. Things
like the segment vector and length are cached behind the
scenes so subsequent retrieval is a no-op. */
template < class DIM, class TYPE = MKT::Double >
class Segment
template < class DIM, class TYPE >
double getDistanceSquared (Segment < DIM, TYPE > const &rkSeg0,
Segment < DIM, TYPE > const &rkSeg1,
double* pfSegP0 = 0,
double* pfSegP1 = 0);
template < class DIM, class TYPE >
double getDistanceSquared2(Segment < DIM, TYPE > const &rkSeg0,
Segment < DIM, TYPE > const &rkSeg1,
double* pfSegP0 = 0,
double* pfSegP1 = 0);
typedef Segment < MKT::Dim2, MKT::Double > Segment2;
typedef Segment < MKT::Dim3, MKT::Double > Segment3;
thanks,
k.m

Never mind, I see that you intended to include b.h, c.h, and d.h in all.h.
Many compilers do not look at template code until the code is instantiated. This code consists only of declarations, with little that can be instantiated. It's possible that other compilers would also complain about this code if they got to the point of processing all the template declarations.
Can you add some instantiations along with template definitions and a main function so that the code can be compiled and linked?

Catch: could not retrieve wsdl imports for wsdl

Hello, I am using JDeveloper 11.1.1.17 and am configuring a catch in a BEPL for a web service.
The web service itself works, and the composite that is calling the web service works properly. I am now trying to configure the catch for the web service. I create the catch, and double-click it to get the GUI for the configuration.
I click on the magnifier to open the "Fault Chooser" window. I click on the Partner links, then the service, and then the "Imported WSDL" for the service. This exposes an error message: Exception: could not retrieve wsdl imports for wsdl
Given that the web service calls a service on a remote server (within my organization, however), I tried re-creating the web service call, and the second time specified that it "copythe WSDL and its dependent artifacts into the project" to see if this would allow the catch to "grab" the wsdl.
It does not. The wsdl is listed under the project wsdl files, but each project wsdl file does not show the necessary information.
Does anyone know if I am doing anything incorrect?
Points Vigorously awarded!
Stuart

Hi HDeiby,
We are facing similar issue and trying to resolve the Oracle advices not to Copy the WSDL files locally , and writes a note " Keeping a copy of WSDL may result in synchronization issues " in Jdeveloper when you try to create a reference .
We found out a way to access the Fault by adding PartnerLink to the WSDL ( I know that it is not a best practice to mix interface and implementation ) . This avoids the synchronization issues .
Do you have any other Thoughts .
Cheers,
Lakshmi

Idoc Error: Could not find code page for receiving system

hi,
I am facing the following error while processing Idocs.
ERROR: Could not find code page for receiving system
Diagnosis
For the logical destination BWFIN, you want to determine the code page in which the data is sent with RFC. However, this is not currently possible, and the IDoc cannot yet be dispatched.
Can somebody suggest a solution for this. I have verified that the RFC destinations have been created both on the sender and receiver, ports (WE21) have been defined, and partner profiles (WE20) also created. How would I troubleshoot this problem?

Hi,
I did analyse on this issue.It is all because of the Langauge settings in the SM59.This can be done by the BASIS person.The Language field would be empty, but when ever we send the IDoc from the unicode to a non unicode system we have to mention the Langauage used.
If this helps you really award me the points.
~Katty

Error could not retrieve the virtual desktop template details

Dear Sir&Madam
I have windows server 2012 R2 DataCenter and I installed Hyper-v , after that i create Template , then I make Preper Shutdown (in C:\windows\System32\SysPrep\SysPrep.exe) Run As Administrator, then choose Generalized , Then Shutdown ,when I make a collection
I got this error (error could not retrieve the virtual desktop template ) please is there any solution for this issue it is very Urgent !!!!!!!!!!!!
Best regards
Rawa Zangana

Hi,
Thank you for posting in Windows Server Forum.
From the error description it suspects that there is some configuration issue. Also agree with Jeremy, please check whether it has 1024 MB of memory. Then suggest you to recheck the steps with below link and then verify the result.
You can run the following command line:
Windows 7: %windir%\system32\sysprep\sysprep.exe /generalize /oobe /shutdown
Windows 8: %windir%\system32\sysprep\sysprep.exe /generalize /oobe /shutdown /mode:vm
Deploying VDI for RDS 2012 / 2012R2 – Part II – Publishing a Windows 7 Pooled Desktop
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support

Problems setting up an OD Replica (Could not retrieve HOST GUID for parent)

I have two computers running Mac OS Lion Server. The first started out as an OD Master and I wanted to migrate that over to the other. Here is the process I took:
Initial: 'A' is master, 'B' is unlinked.
1) set 'B' as replica of 'A'
2) set 'A' as master.
3) set 'B' as replica of 'A'.
Steps 1 and 2 went through fine, but 3 failed. I then made 'A' standalone and tried to re-bind it as a replica with no avail.
after investigation, i saw some errors in 'B's logs and decided to just nuke it and create a clean master. This went through without a problem, but I'm still getting errors trying to join 'B' as a replica. I dont see any errors in 'B' that would show any problems. in 'A' i see the following error in the slapdconfig.log:
FATAL : Could not retrieve HOST GUID for parent
I have not found any information on the internet for that error and i have not found any other errors on 'A' that would hint at why i cannot make it a replica.
Anyone have any ideas on what I might be able to try?

I too have this error in setting up a 10.8 OD replica. Did you ever find a solution
Thanks
Vern Dempster

"Could not retrieve the settings for endpoint monitoring."

So my VMs are hosed because suddenly Azure cannot retrieve the settings for endpoint monitoring. If I try to start the VMs, it fails for this reason. If I try to configure the VMs, it fails for this reason. When I look at ENDPOINT MONITORING
under CONFIGURE it constantly says "Loading..." This all began when today I tried to switch a VM from STANDARD to BASIC configuration. Now I can't start any VM.

Once I powered off the VM there was no starting it again, even after switching back to STANDARD config. Same "Could not retrieve the settings for endpoint monitoring" error every time. I gave up, duplicated the disk, and created a
new VM from scratch, which has no issue with endpoint monitoring. Ridiculous that I had to do that. Azure continues to be as brittle and unreliable as a drunk monkey.

Sun C++ 5.13 SunOS_sparc Beta2 2014/06/17: Error: Could not find a match for std::_Tuple_impl 0, unsigned&& ::_Tuple_impl(std::tuple unsigned&& , unsigned) needed in std::tuple unsigned&& ::tuple unsigned, void (unsigned&&).

I think I downloaded the latest Solaris Studio version. When I compile my code, I got the following error:
bash-3.00$ gmake -f Makefile.sun
CC -c -o metadata.o metadata.cpp -I. -I.. -g -O0 -std=c++11 -I/export/home/oracle/zhifan/boost_1_55_0 -I/export/home/oracle/zhifan/instantclient_11_2/sdk/include -V
CC: Sun C++ 5.13 SunOS_sparc Beta2 2014/06/17
ccfe: Sun C++ 5.13 SunOS_sparc Beta2 2014/06/17
"metadata.cpp", line 20: Warning: db hides databus::MetadataManager::db.
"metadata.cpp", line 26: Warning: db hides databus::MetadataManager::db.
Error: Could not find a match for std::_Tuple_impl<0, unsigned&&>::_Tuple_impl(std::tuple<unsigned&&>, unsigned) needed in std::tuple<unsigned&&>::tuple<unsigned, void>(unsigned&&).
"/export/home/oracle/zhifan/SolarisStudio12.4-beta_jul14-solaris-sparc/lib/compilers/CC-gcc/include/c++/4.8.2/tuple", line 868:     Where: While instantiating "std::tuple<unsigned&&>::tuple<unsigned, void>(unsigned&&)".
"/export/home/oracle/zhifan/SolarisStudio12.4-beta_jul14-solaris-sparc/lib/compilers/CC-gcc/include/c++/4.8.2/tuple", line 868:     Where: Instantiated from std::forward_as_tuple<unsigned>(unsigned&&).
"/export/home/oracle/zhifan/SolarisStudio12.4-beta_jul14-solaris-sparc/lib/compilers/CC-gcc/include/c++/4.8.2/bits/stl_map.h", line 485:     Where: Instantiated from non-template code.
1 Error(s) and 2 Warning(s) detected.
gmake: *** [metadata.o] Error 2
with the same code, It can be compiled with g++ on Linux platform.
1 Is the issue same as 12.4 Beta, Error: Could not find a match for std::_Tuple_impl<0, std::string &&>::_Tuple_impl(std::tuple<std::string &&> ?
2 Do we have any workaround for this issue?
3 When will the final 12.4 release be available?

I can't say for sure whether your problem is fixed in the final release without a test case, but I'd say the chances are very good.
The final release will be announced soon. Watch this space, or the Oracle Solaris Studio page for an announcement.

12.4 Beta, Error: Could not find a match for std::_Tuple_impl 0, std::string && ::_Tuple_impl(std::tuple std::string &&

Hi,
would you guys say code that compiles fine without -std=c++11 should also compile *with* -std=c++11?
raider@sol112_x86:/tmp $ CC -V
CC: Sun C++ 5.13 SunOS_i386 Beta2 2014/06/17
raider@sol112_x86:/tmp $ CC buggy.cc
raider@sol112_x86:/tmp $ CC -std=c++11 buggy.cc
Error: Could not find a match for std::_Tuple_impl<0, std::string &&>::_Tuple_impl(std::tuple<std::string &&>, std::string ) needed in std::tuple<std::string &&>::tuple<std::string, void>(std::string &&).
"/opt/SolarisStudio12.4-beta_jul14-solaris-x86/lib/compilers/CC-gcc/include/c++/4.8.2/tuple", line 868:     Where: While instantiating "std::tuple<std::string &&>::tuple<std::string, void>(std::string &&)".
"/opt/SolarisStudio12.4-beta_jul14-solaris-x86/lib/compilers/CC-gcc/include/c++/4.8.2/tuple", line 868:     Where: Instantiated from std::forward_as_tuple<std::string>(std::string &&).
"/opt/SolarisStudio12.4-beta_jul14-solaris-x86/lib/compilers/CC-gcc/include/c++/4.8.2/bits/stl_map.h", line 485:     Where: Instantiated from non-template code.
1 Error(s) detected.
raider@sol112_x86:/tmp $ cat buggy.cc
#include <map>
#include <string>
typedef std::map<std::string, std::string> StrStrMap;
int main(void)
    StrStrMap dict;
    dict["bug"] = "feature";
    return 0;

C++11 is approximately a superset of C++03. If you write in the common subset, the code will compile in any mode. For example, a basic hello-world program
#include <iostream>
int main() { std::cout << "Hello, world!\n"; }
will compile and run as C++98/03, as C++11, as C++14, and I'm sure will also work with the next standard, planned for 2017.
But if you use syntax or library types and functions that are new in C++11, the code will not compile as C++03.
In my previous post, I might have sounded too negative about compiling C++03 code in C++11 mode. If you have a C++03 program that is intended to be portable, and that works with different compilers on different platforms, chances are good that it will continue to work in C++11. The chances are very good that only minor modifications will be needed.

BW Monitor error Could not find code page for receiving system

Hi All,
Frequent BW Monitor error - Could not find code page for receiving system
I checked SM59 and every setting is fine there. Any other possibility ?
Regards
Srinivas

The log updated in the status tab was:
Error when updating Idocs in Business Information Warehouse
Diagnosis
Errors have been reported in Business Information Warehouse during IDoc update:
Could not find code page for receiving system
System Response
Some IDocs have error status.
Procedure
Check the IDocs in Business Information Warehouse . You do this using the extraction monitor.
Error handling:
How you resolve the errors depends on the error message you get.

Debuging mapping - error : Could not find test data for target operators ?

Hello, Please help me.
I use Oracle Warehouse Builder 10gR2.
I created a cube with two dimensions.
I debugged the mappings of these two dimensions then viewed their data after deployment.
I tried to debug the mapping of the cube, and got the error: Could not find test data for all source and target operators.
For source objects exist test data but for the target operator (cube_out) logically we do not need test data !!!! .
But the error is here: Could not find test data for target operators. Why ??
How to configure or explain to owb that the target operator do not have test data ????
I need your help.
thank you in advance.

Sorry, I can not understand your approach ?
I explain you in detail : I work in ROLAP.
I have two dimensions : DIM_1 and DIM_2 linked with the cube (Fact_table).
I have three mappings : MAP_DIM1, MAP_DIM2, MAP_CUBE.
For the MAP_CUBE, I have source operator : VIEW_IN and Target operator : CUBE_OUT.
I could see the data dimensions : DIM_1 and DIM_2 after debugging and Deployment in the OLAP schema.
I tried debugged the mapping: MAP_CUBE so I got the error: Could not find test data for all source and target operators.*
thank you for help.

Error could not find file/pathurl for id file::QTMRead

Hi,
I'm very puzzled as to this error I have gotten on multiple projects when trying to check back out.
Error could not find file/pathurl for id file::QTMRead
I'm halfway through a project with a deadline of next week, and have been using edit proxies, so am just worried about being able to export the final project if the Server cannot find the file.
It seems to get this error after a glitchy upload where the server locks up and I have to force quit. Has anyone had this message before/have any ideas how to solve it?
Some speedy help would be very much appreciated.
Thanks,
Dania

You need to make sure that you imported the Reports.xml file into the FDM application. Also, you will want to login to the application using the workbench client and click on the Reports tab and expand the English > Check Reports and right-click on the check report and choose "Set as Validation Report".

While installing the itunes setup i am getting an error"Could not register type library for file ipodsevice.exe" What to do now?

While installing the itunes setup i am getting an error"Could not register type library for file ipodsevice.exe" What to do now?

Try posting in the iTunes forum. You have an iTunes problem not an iPod problem

AutoConfig: ERROR: Could not retrieve mount point for product top

Similar Messages

Maybe you are looking for