Autofill can I reset one web page?

I hit 'never auto fill this page' accidentaly. I want auto fill to fill this page out. Do I have to re set Safari and loose ALL my autofill data? How can I get it to fill this one page without a complete re set? Thanks

Hi Nicholas,
I don't use Autofill myself, but have you checked in the 'Autofill' section of Safari's preferences? Clicking on one of the 'Edit' buttons brings up a window which allows you to remove individual webpage settings. Alternatively, have a look through Keychain Access to see if you can find what you're looking for.
Yang

Similar Messages

  • Can not open any web page in Safari

    can not open any web page in Safari on the IPad.  All other wireless features work fine.

    If this does not work then try a reset ,
    Reset your iPad by pressing the 'Sleep' and 'Home' button at the same time for about 15 seconds or so. Your iPad  will then go through a reset / reboot procedure and will be ready for use within about a minute.
    Don't worry about doing this as you will not lose data or settings.
    Good luck and do report back.

  • How do I have more than one web page on at a time?

    I can only watch or use one web page at a time. I f I try to get on something else it will knock me out of what I was doing on the other page.

    reboot in safemode and repeat the same behavior you did previously. If it works then it's likely an addon issue or extension causing your problem.
    '''Try the Firefox Safe Mode''' to see how it works there. The Safe Mode is a troubleshooting mode, which disables most add-ons.''
    ''(If you're not using it, switch to the Default theme.)''
    * You can open the Firefox 4.0+ Safe Mode by holding the '''Shift''' key when you use the Firefox desktop or Start menu shortcut.
    * Or use the Help menu item and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    ''Don't select anything right now, just use "'Start in Safe Mode"''
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shift key) to open it again.''
    '''''If it is good in the Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one.
    Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''

  • Can Spry display another web page within a detail region?

    I currently have a non-Spry enabled site I would like to add
    Spry to. Basically, it is a story/photo web site and I have
    separate pages created already for each photo "event" that includes
    text, pictures, etc. Right now I have a menu with all of the
    stories that the users clicks on and it takes them to that
    particular story. I also use templates to control a common look and
    feel and header, but basically, one web page per story (they are
    all similar, but varying # of pictures, paragraphs, etc.). It works
    fine, but it does reload the web page for every story.
    So, what I would like to do is have one region defined where
    I have a sorted list of "stories" with dates and brief descriptions
    and when a user clicks on one of the stories I would like it to
    display the web page I have already created in another
    region....kind of like message preview in Outlook. Anyway, I know
    it is easy enough to create an XML data set that defines the title
    of the story, date, etc., and I could even include a relative link
    of the actual web page story in the data set to define where the
    web page is. I guess my main question is, how would I display an
    entire web page inside the detail div "region"? I know if you just
    had a simple picture, it would look something like this: <img
    src="images/{@path}"><br/>Name:{@path}, but what tag could
    you use to pull in an entire web page to preview inside the detail
    div region?
    Thanks in advance!

    Well I don't know if this is exactly what you're looking for, but you can have a browser window pop up from an event in an applet. If you use something like:
    getAppletContext().showDocument(new URL(theUrl), "_blank");
    a new browser window will pop up with whatever URL you want.
    Hope that helps a little.
    -Sheepy.

  • HAVE ONE WEB PAGE OPEN AND SUDDENLY ANOTHER WEB PAGE OPENS

    I can have one web page open and suddenly another web page will pop up. Why? It doesn't happen all the time. Like I said suddenly.

    Another thing you can try doing is scanning for Malware:
    Download and Install MalwareBytes Anti-Malware, run a full Scan. [http://www.malwarebytes.org/ http://www.malwarebytes.org/]
    Download and Run TDSSKiller [http://support.kaspersky.com/faq/?qid=208283363 http://support.kaspersky.com/faq/?qid=208283363]
    Download and Install Microsoft Security Essentials [http://windows.microsoft.com/en-US/windows/products/security-essentials http://windows.microsoft.com/en-US/windows/products/security-essentials] (not an official endorsement, but I personally recommend MSE as an awesome permanent anti-virus)
    Double check for all Windows Updates.
    What is the website that opens up? Is it always the same, always different, one of a few, etc?

  • Can only access one web site

    I can only access one web site . www.cisco.com. I am connected to the internet via a lynksys DSL Router, I am using dhcp and NAT from the Lynksys note:works fine for 3 other windows based pc's.
    when I try to connect to any other site the page Hangs during load and neve displays.
    I can ping all of the web sites that do not come up
    I am using a SunBlade 100 and did a new install. I tried the install with webstart and had the same result during the install. again I can only open sucessfully www.cisco.com.

    Hello!
    I am getting this error, but the above fix does not solve the issue, however I do know what has caused it.
    I have an edmx file in a WCF webservice which feeds a silverlight app.  The edmx is quite complex and a bit fragile, but was working fine up until I introduced our Industry Codes view into the model.  The view is basically { ID, ParentID, Name, ... }.  In my model I have created an association to itself which describes Children(*)/Parent(0/1) so I have a nice and tidy hierarchical structure.  The edmx and the service build without any errors - hurrah!  However, when I update the service reference I then get the below error (and a whole load of others as none of the webservice objects exist anymore):
    Error 21 Custom tool error: Failed to generate code for the service reference 'WCF_ContactAdmin'.  Please check other error and warning messages for details. X:\2008-054 ContactAdmin_Silverlight\Contact2_Admin_Silverlight\Service References\WCF_ContactAdmin\Reference.svcmap 1 1 Contact2_Admin_Silverlight
    When I try the fix mentioned in the link above this error disappears, but then so do all the objects in the datamodel, so I cannot continue from there.
    Having the hierarchical data objects defined in the EDM will make like so much easier in future, any help will be greatly appreciated, thank you!!
    Tim
    Web Developer at Terrapinn

  • I can not load a web page? I have gone through the help pages so many times. Removed, reinstalled, checked preferences, checked security settings. Can anyone offer a possible solution?

    I can not load a web page? I have gone through the help pages so many times. Removed, reinstalled, checked preferences, checked proxies, cleared cache, checked security settings. I have tried disabling plugins and addons. Can anyone offer a possible solution? On Mac.

    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    *Firefox > Preferences > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Firefox > Preferences > Privacy > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *http://kb.mozillazine.org/Error_loading_websites
    *https://support.mozilla.org/kb/Error+loading+web+sites

  • Showing applets depending upon user input in one web page

    hi, I have three applets. I want to create a webpage, put three buttons (or other interactions) on it. If button one is clicked, applet one is shown. If button two is clicked, applet two is shown. I want this to happen in one web page only and one applet at a time depending on user input. Is there a way to do it? Do I need to use javascript? I am new to javascript ,but if you can point me to relevant javascript topics, i am willing to learn it. Thanks.

    There are a couple of ways I can think of off the bat...
    1) Create an IFrame that the Applet will be displayed in. The button you press submits a form whose target is the IFrame and whose action is a page with the correct Applet.
    2) Actually load all 3 Applets on the page and hide them all in a invisible divs. The button calls a javascript function that unhides a specific div (and hides all the others to be sure only one is displayed at a time).
    3) Uber-javascript AJAX like control that when the button is pushed makes a request to a page that returns the applet tag which the javascript control then inserts into the page at the proper location.
    I would toss up between 1 & 2.
    For code, search Google for important key words (like "form target iframe", or "javascript make divs invisible").

  • Can't export a web page

    I've just upgradded to iLife '08. When I try to save a web page the same as I had with the previous version of iPhoto, it doesn't work. The following steps are taken:
    Highlight eight photos in a folder
    Select File>Export
    In the Export Photos window, select Web Page tab
    Make other selections on the page and click Export
    Then I've tried various file destination folders and the Desktop
    When I click OK, an Exporting sub-window appears for a moment, then it changes to say
    Unable to generate web page and only gives me the option to Cancel
    It gives me no clues as to why it is unable to generate a web page. It has created the folders for the Images, Pages and Thumbnails but there isn't anything in those folders. I believe this is the same steps I used many times with iPhoto '06 to create a web pages.
    Does anyone have an idea on how to save web pages with the new iPhoto? How can I revert back to the old version of iPhoto?
    Thank you for you help.
    Bill H

    Bill:
    Welcome to the Apple Discussions. Try the following:download and run BatChmod on the iPhoto Library folder with the settings shown here, putting your administrator login name, long or short, in the owner and group sections. You can either type in the path to the folder or just drag the folder into that field. See if this will help.
    Next, log into another account or boot into Safe Mode and see if you can export to a web page. If so then there's something amiss with your account. If not, then a reinstall of iPhoto seems appropriate.
    Do you Twango?
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • 1. How can we search the Forum to see if a question has already been asked? 2. Can I send a Web Page and not just its Link?

    1. How can we search the Forum to see if a question has already been asked? Search goes back to Help and out of the Forum.
    2. Can I send a Web Page and not just its Link? Explorer allows it.

    1. How can we search the Forum to see if a question has already been asked? Search goes back to Help and out of the Forum.
    2. Can I send a Web Page and not just its Link? Explorer allows it.

  • How can I print a web page to a hard copy with Adobe?

    How can I print a web page to a hard copy with Adobe? When I print this particular page in the usual way it prints only the text of that page, not the photo that's also part of that page.

    I have Adobe SendNow, but I can buy another Adobe product if it will solve my web page printing problem.

  • I can't print any web page. after the print command, it wants to save xps files. on cannon printer. vista system

    can't print any web page. after the print command, it wants to save as a xps file.
    == This happened ==
    Every time Firefox opened
    == after up grade to 3.6.6 ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.0; Trident/4.0; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0; .NET CLR 1.1.4322; .NET CLR 3.5.30729; .NET CLR 3.0.30729; .NET4.0C)

    I found that Firefox/XPS had deleted all printer driver setups except for the XPS connection. I had to reinstall my printer connection in order to have that selection present in the printer dialogue box.

  • Since the last 3 upgrades (thru Firefox 7.0) I can't print a web page. This is true using 2 different printers. I have an iMac 10.6.8.

    Since the last 3 upgrades (thru Firefox 7.0) I can't print a web page. This is true using 2 different printers. I have an iMac 10.6.8.

    Just read that the default memory storage on FF is set to 5 mbs. You can up that by clicking on tools, advanced and overriding the default and set it to 50 mbs (if you use lots of tabs) or 10 mbs (if you use just a few).
    I open a blank tab and clear the cache periodically, while I am working. I can have several tabs open and watch videos on Youtube, by doing this. Have you cleared your cache?
    Since I have an older computer, I've also used CCleaner for years. I use it often, but always before signing off. You can get it free...search for CCleaner, download from Pirifoam free. I didn't change any of the settings and it clears crap left behind from uninstalling programs, clears all browsers at once of: cookies, history, passwords, etc. I love it!
    I had freezing, before using the "open blank tab, clear the cache" thing. Now I have no problems. Plus, as I said...you can change the default memory usage for FF and that should help too.
    Hope this helps! Good luck! :)

  • Following the upgrade to 34.0.5, I can no longer access web pages of our SAN, airco, vSphere Web Clients, etc. How can I correct this?

    Following upgrade to 34.05, can no longer access web pages of the SAN management interface, the airco system, the vSphere Web Client, etc. All still work in Chrome.
    The airco system gives an error:
    Firefox cannot guarantee the safety of your data on 10.32.16.50 because it uses SSLv3, a broken security protocol.
    Advanced info: ssl_error_no_cypher_overlap
    The SAN management interface and vSphere Web Clients display an empty page. Not sure whether these also have problems due to SSLv3.
    I understand you wanting to be cautious, but I seriously doubt I need to face an attack from our SAN. Please, at least give us an option to connect regardless.

    hello, ssl 3.0 is disabled in firefox versions 34 & upwards by default - if you want to re-enable it you can do that like this which will make you vulnerable to the recently published poodle attack though:
    enter '''about:config''' into the firefox address bar (confirm the info message in case it shows up) & search for the preference named '''security.tls.version.min'''. double-click it, change its value to '''0''' and restart the browser.
    https://blog.mozilla.org/security/2014/10/14/the-poodle-attack-and-the-end-of-ssl-3-0/

  • Haveing problems with Safari. It gives me an error message. Safari can't open the web page, because it can't establish a secure connection to the server. It only seams to have a problem on https sites. Any help would be apreciated.

    Safari keeps giving  and error message. " Safari can't open the web page( insert web page here) , because it can't establish a secure connetion to the server.
    It only seams to have a problem with https sites.
    Any help would be appreciated

    The "s" in "https" indicates the site is a secure server--usually a site that will require a password.  Connections to secure servers can be blocked by parental controls.  Are you using any parental controls, either through OSX's settings (in System Preferences) or third party parental control software (such as Netnanny)?  If so, check the settings to make sure they will allow the connection.

Maybe you are looking for